On Tue, 14 Oct 2008, Wolfgang Denk wrote:
> In message <[EMAIL PROTECTED]> you wrote:
>>
>> This is where bss goes when u-boot is linked. It gets relocated to a
>> different address in ram.
>
> Where is defined which address it is, then?
It is determined at run time. Look in cpu/mpc85xx/start.S
Dear Trent,
In message <[EMAIL PROTECTED]> you wrote:
>
> > Where is bss then, if you try to locate it beyond the end of physical
> > memory? To the best of my understanding there are two possibilities:
> > tool chains running on a 32 bit host will simply wrapr addresses
> > around, i. e. st
On Tue, 14 Oct 2008, Wolfgang Denk wrote:
> In message <[EMAIL PROTECTED]> you wrote:
>>
>> B) The U-Boot image is over 4MB in size. The image size for this is from
>> TEXT_BASE to the end of the reset vector. It's not the size of the U-Boot
>> code as there could be a huge gap between the end of
On Tue, 14 Oct 2008, Wolfgang Denk wrote:
> Dear Trent Piepho,
>
> In message <[EMAIL PROTECTED]> you wrote:
>>
>> B) The U-Boot image is over 4MB in size. The image size for this is from
>> TEXT_BASE to the end of the reset vector. It's not the size of the U-Boot
>> code as there could be a huge
Dear Trent Piepho,
In message <[EMAIL PROTECTED]> you wrote:
>
> B) The U-Boot image is over 4MB in size. The image size for this is from
> TEXT_BASE to the end of the reset vector. It's not the size of the U-Boot
> code as there could be a huge gap between the end of the code and the reset
> v
They are all the same except for the flash size and some copyright
comments.
The combined script assumes a flash bank size of 4 MB, which work for all
current platforms. This assumtion is only a problem if:
A) The flash bank is less than 4 MB and it is mapped to a location that not
aligned to th
6 matches
Mail list logo
