This patch adds an environment variable called "hab_enabled" which gets set
to a boolean status indicating whether HAB is enabled or not.
Subsequent patches can use this environment variable to determine if its
necessary to run a given binary through the hab_auth_img console command.
Signed-off-by: Bryan O'Donoghue <bryan.odonog...@linaro.org>
---
board/warp7/warp7.c | 8 ++++++++
include/configs/warp7.h | 3 +++
2 files changed, 11 insertions(+)
diff --git a/board/warp7/warp7.c b/board/warp7/warp7.c
index 327f656..0d3d324 100644
--- a/board/warp7/warp7.c
+++ b/board/warp7/warp7.c
@@ -10,6 +10,7 @@
#include <asm/arch/mx7-pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
+#include <asm/mach-imx/hab.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/mach-imx/mxc_i2c.h>
#include <asm/io.h>
@@ -203,6 +204,13 @@ int board_late_init(void)
*/
clrsetbits_le16(&wdog->wcr, 0, 0x10);
+#ifdef CONFIG_SECURE_BOOT
+ /* Determine HAB state */
+ env_set_ulong(HAB_ENABLED_ENVNAME, imx_hab_is_enabled());
+#else
+ env_set_ulong(HAB_ENABLED_ENVNAME, 0);
+#endif
+
#ifdef CONFIG_SERIAL_TAG
/* Set serial# standard environment variable based on OTP settings */
get_board_serial(&serialnr);
diff --git a/include/configs/warp7.h b/include/configs/warp7.h
index 98fedb8..10db716 100644
--- a/include/configs/warp7.h
+++ b/include/configs/warp7.h
@@ -139,4 +139,7 @@
#define CONFIG_USBNET_DEV_ADDR "de:ad:be:af:00:01"
+/* Environment variable name to represent HAB enable state */
+#define HAB_ENABLED_ENVNAME "hab_enabled"
+
#endif
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
