Hi Chin,
On Mon, 15 Sep 2014 01:39:07 -0500
Chin Liang See cl...@altera.com wrote:
Hi Masahiro,
On Fri, 2014-09-12 at 17:06 +0900, Masahiro Yamada wrote:
+/* nand_init() - initialize data to make nand usable by SPL */
+void nand_init(void)
+{
+ /* access to main area
Hi Masahiro,
On Wed, 2014-09-17 at 18:09 +0900, Masahiro Yamada wrote:
Hi Chin,
On Mon, 15 Sep 2014 01:39:07 -0500
Chin Liang See cl...@altera.com wrote:
Hi Masahiro,
On Fri, 2014-09-12 at 17:06 +0900, Masahiro Yamada wrote:
+/* nand_init() - initialize data to make nand
Hi Masahiro,
On Fri, 2014-09-12 at 17:06 +0900, Masahiro Yamada wrote:
+/* nand_init() - initialize data to make nand usable by SPL */
+void nand_init(void)
+{
+ /* access to main area */
+ writel(0, denali_flash_reg + TRANSFER_SPARE_REG);
+
+ page_size =
Hi Masahiro,
On Fri, 2014-09-05 at 14:50 +0900, Masahiro Yamada wrote:
The SPL-mode driver for Denali(Cadence) NAND Flash Memory Controller IP.
This driver requires two CONFIG macros:
- CONFIG_SPL_NAND_DENALI
Define to enable this driver.
- CONFIG_SYS_NAND_BAD_BLOCK_POS
Hi.
Changes in v4:
- Add a workaround to not depend on the Denali driver
posted by Chin Liang See.
This driver has been taking too long:
http://patchwork.ozlabs.org/patch/381305/
Yup, hopefully v10 would be the final patch.
I hope so.
+static int
The SPL-mode driver for Denali(Cadence) NAND Flash Memory Controller IP.
This driver requires two CONFIG macros:
- CONFIG_SPL_NAND_DENALI
Define to enable this driver.
- CONFIG_SYS_NAND_BAD_BLOCK_POS
Specify bad block mark position in the oob space. Typically 0.
Signed-off-by:
6 matches
Mail list logo