On Tue, Jan 28, 2014 at 5:31 PM, Robert Nelson robertcnel...@gmail.com wrote:
With the xM revision C, the DC control of the usb hub was inverted.
By adding the enable-active-high property to hsusb2_power_reg, mainline
omap3-beagle-xm.dtb
will now activiate properly activate the usb hub on
On Wed, Jan 29, 2014 at 08:51:27AM -0600, Robert Nelson wrote:
On Tue, Jan 28, 2014 at 5:31 PM, Robert Nelson robertcnel...@gmail.com
wrote:
With the xM revision C, the DC control of the usb hub was inverted.
By adding the enable-active-high property to hsusb2_power_reg, mainline
Well, we have per-platform fixups in the tree today. However this now
means that only u-boot is going to provide a correct and fully
functional tree for those revs, which isn't good imho for the
beagleboard community use cases of older u-boots / distro support /
non-u-boot bootloader
On Wed, Jan 29, 2014 at 03:55:36PM -0600, Robert Nelson wrote:
Well, we have per-platform fixups in the tree today. However this now
means that only u-boot is going to provide a correct and fully
functional tree for those revs, which isn't good imho for the
beagleboard community use cases
With the xM revision C, the DC control of the usb hub was inverted.
By adding the enable-active-high property to hsusb2_power_reg, mainline
omap3-beagle-xm.dtb
will now activiate properly activate the usb hub on older xMA/B varients.
Signed-off-by: Robert Nelson robertcnel...@gmail.com
CC: Tom
5 matches
Mail list logo