On Tue, May 07, 2013 at 04:30:48PM +0800, Liu Gang wrote: > When a b4860qds board boots from SRIO or PCIE, it needs to finish these > processes: > 1. Set all the cores in holdoff status. > 2. Set the boot location to one PCIE or SRIO interface by RCW. > 3. Set a specific TLB entry for the boot process. > 4. Set a LAW entry with the TargetID of one PCIE or SRIO for the boot. > 5. Set a specific TLB entry in order to fetch ucode and ENV from > master. > 6. Set a LAW entry with the TargetID one of the PCIE ports for > ucode and ENV. > 7. Slave's u-boot image should be generated specifically by > make xxxx_SRIO_PCIE_BOOT_config. > This will set SYS_TEXT_BASE=0xFFF80000 and other configurations. > > For more information about the feature of Boot from SRIO/PCIE, please > refer to the document doc/README.srio-pcie-boot-corenet. > > Signed-off-by: Liu Gang <gang....@freescale.com>
Applied, thanks! Andy _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
