From: Marcus Cooper <codekip...@gmail.com>

---
 arch/arm/dts/Makefile                    |   1 +
 arch/arm/dts/sun7i-a20-olinuxino-evb.dts | 233 +++++++++++++++++++++++++++++++
 board/sunxi/MAINTAINERS                  |   5 +
 configs/A20-OLinuXino-EVB_defconfig      |  17 +++
 4 files changed, 256 insertions(+)
 create mode 100644 arch/arm/dts/sun7i-a20-olinuxino-evb.dts
 create mode 100644 configs/A20-OLinuXino-EVB_defconfig

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index d9a2f5f..dc9a500 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -120,6 +120,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
        sun7i-a20-m3.dtb \
        sun7i-a20-m5.dtb \
        sun7i-a20-mk808c.dtb \
+       sun7i-a20-olinuxino-evb.dtb \
        sun7i-a20-olinuxino-lime.dtb \
        sun7i-a20-olinuxino-lime2.dtb \
        sun7i-a20-olinuxino-micro.dtb \
diff --git a/arch/arm/dts/sun7i-a20-olinuxino-evb.dts 
b/arch/arm/dts/sun7i-a20-olinuxino-evb.dts
new file mode 100644
index 0000000..a0071fa
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-olinuxino-evb.dts
@@ -0,0 +1,233 @@
+/*
+ * Copyright 2015 - Marcus Cooper <codekip...@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+       model = "Olimex A20-OLinuXino-EVB";
+       compatible = "olimex,a20-olinuxino-evb", "allwinner,sun7i-a20";
+
+       aliases {
+               serial0 = &uart0;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&led_pins_olinuxinoevb>;
+
+               green {
+                       label = "a20-olinuxino-evb:green:usr";
+                       gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+                       default-state = "on";
+               };
+       };
+
+       reg_axp_ipsout: axp_ipsout {
+               compatible = "regulator-fixed";
+               regulator-name = "axp-ipsout";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               regulator-always-on;
+       };
+};
+
+&ahci {
+       target-supply = <&reg_ahci_5v>;
+       status = "okay";
+};
+
+&ehci0 {
+       status = "okay";
+};
+
+&ehci1 {
+       status = "okay";
+};
+
+&gmac {
+       pinctrl-names = "default";
+       pinctrl-0 = <&gmac_pins_rgmii_a>;
+       phy = <&phy1>;
+       phy-mode = "rgmii";
+       status = "okay";
+
+       phy1: ethernet-phy@1 {
+               reg = <1>;
+       };
+};
+
+&i2c0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c0_pins_a>;
+       status = "okay";
+
+       axp209: pmic@34 {
+               compatible = "x-powers,axp209";
+               reg = <0x34>;
+               interrupt-parent = <&nmi_intc>;
+               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+               interrupt-controller;
+               #interrupt-cells = <1>;
+
+               acin-supply = <&reg_axp_ipsout>;
+               vin2-supply = <&reg_axp_ipsout>;
+               vin3-supply = <&reg_axp_ipsout>;
+               ldo24in-supply = <&reg_axp_ipsout>;
+               ldo3in-supply = <&reg_axp_ipsout>;
+
+               regulators {
+                       vdd_rtc: ldo1 {
+                               regulator-min-microvolt = <1300000>;
+                               regulator-max-microvolt = <1300000>;
+                               regulator-always-on;
+                       };
+
+                       avcc: ldo2 {
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-always-on;
+                       };
+
+                       vcc_csi0: ldo3 {
+                               regulator-min-microvolt = <700000>;
+                               regulator-max-microvolt = <3500000>;
+                               regulator-always-on;
+                       };
+
+                       vcc_csi1: ldo4 {
+                               regulator-min-microvolt = <1250000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-always-on;
+                       };
+
+                       vdd_cpu: dcdc2 {
+                               regulator-min-microvolt = <700000>;
+                               regulator-max-microvolt = <2275000>;
+                               regulator-always-on;
+                       };
+
+                       vdd_int: dcdc3 {
+                               regulator-min-microvolt = <700000>;
+                               regulator-max-microvolt = <3500000>;
+                               regulator-always-on;
+                       };
+               };
+       };
+};
+
+&i2c1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c1_pins_a>;
+       status = "okay";
+};
+
+&mmc0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <4>;
+       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+       cd-inverted;
+       status = "okay";
+};
+
+&ohci0 {
+       status = "okay";
+};
+
+&ohci1 {
+       status = "okay";
+};
+
+&pio {
+       ahci_pwr_pin_olinuxinoevb: ahci_pwr_pin@1 {
+               allwinner,pins = "PC3";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+
+       led_pins_olinuxinoevb: led_pins@0 {
+               allwinner,pins = "PH2";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+};
+
+&reg_ahci_5v {
+       pinctrl-0 = <&ahci_pwr_pin_olinuxinoevb>;
+       gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+       status = "okay";
+};
+
+&reg_usb1_vbus {
+       status = "okay";
+};
+
+&reg_usb2_vbus {
+       status = "okay";
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins_a>;
+       status = "okay";
+};
+
+&usbphy {
+       usb1_vbus-supply = <&reg_usb1_vbus>;
+       usb2_vbus-supply = <&reg_usb2_vbus>;
+       status = "okay";
+};
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 1b44ce8..6dd55a2 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -45,6 +45,11 @@ F:   configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
 F:     include/configs/sun9i.h
 F:     configs/Merrii_A80_Optimus_defconfig
 
+A20-OLINUXINO-EVB BOARD
+M:     Marcus Cooper <codekip...@gmail.com>
+S:     Maintained
+F:     configs/A20-OLinuXino-EVB_defconfig
+
 A20-OLINUXINO-LIME BOARD
 M:     FUKAUMI Naoki <nao...@gmail.com>
 S:     Maintained
diff --git a/configs/A20-OLinuXino-EVB_defconfig 
b/configs/A20-OLinuXino-EVB_defconfig
new file mode 100644
index 0000000..a4d0978
--- /dev/null
+++ b/configs/A20-OLinuXino-EVB_defconfig
@@ -0,0 +1,17 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN7I=y
+CONFIG_DRAM_CLK=480
+CONFIG_MMC0_CD_PIN="PH1"
+CONFIG_USB0_VBUS_PIN="PB9"
+CONFIG_USB0_VBUS_DET="PH5"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-evb"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_USB_EHCI_HCD=y
+
-- 
2.5.0

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to