-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Wednesday, September 10, 2008 5:57 PM
To: Mari Ivan-AIM018
Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] [fw_printenv should open device as O_SYNC]
Dear Ivan,
In message
[EMAIL PROTECTED] you
wrote:
We have hit
Hi
We are using ATCA equipment and those boards have redundant boot banks
and they are managed by IPMI controllers.
So while you are you are running Linux, you can change the boot banks
for next restart through set boot options IPMI command.
The problem arises when we write the U-Boot env
Hi all,
We have hit the following issue in a board with 2 flash banks.
First I set some env variable in U-boot, using fw_setenv, then
immediately I switch the banks. But as the buffers have not yet been
flushed to the mtd driver, the bank switching leaves the flash in
corrupted state.
I ve
On Wed, 10 Sep 2008, Mari Ivan-AIM018 wrote:
Hi all,
We have hit the following issue in a board with 2 flash banks.
First I set some env variable in U-boot, using fw_setenv, then
immediately I switch the banks. But as the buffers have not yet been
flushed to the mtd driver, the bank
Dear Ivan,
In message [EMAIL PROTECTED] you wrote:
We have hit the following issue in a board with 2 flash banks.
First I set some env variable in U-boot, using fw_setenv, then
immediately I switch the banks. But as the buffers have not yet been
flushed to the mtd driver, the bank
5 matches
Mail list logo