Hi,
> -----Original Message-----
> From: Maniyam, Dinesh <dinesh.mani...@intel.com>
> Sent: Thursday, December 7, 2023 3:46 PM
> To: u-boot@lists.denx.de
> Cc: Marek <ma...@denx.de>; Simon <simon.k.r.goldschm...@gmail.com>;
> Chee, Tien Fong <tien.fong.c...@intel.com>; Hea, Kok Kiang
> <kok.kiang....@intel.com>; Maniyam, Dinesh <dinesh.mani...@intel.com>;
> Ng, Boon Khai <boon.khai...@intel.com>; Yuslaimi, Alif Zakuan
> <alif.zakuan.yusla...@intel.com>; Chong, Teik Heng
> <teik.heng.ch...@intel.com>; Zamri, Muhammad Hazim Izzat
> <muhammad.hazim.izzat.za...@intel.com>; Lim, Jit Loon
> <jit.loon....@intel.com>; Tang, Sieu Mun <sieu.mun.t...@intel.com>
> Subject: [PATCH] arm: socfpga: stratix10: SPI clock support
>
> From: Dinesh Maniyam <dinesh.mani...@intel.com>
>
> This patch is to add SPI clock support for stratix10. Get clock rate function
> always returning 0 because the DW-SPI driver get the rate from clock node in
> dts but Stratix10 does not support device tree clock node.To overcome this spi
> will get the clock_rate directly from spi clock controller override the weaker
> function.
>
> Signed-off-by: Dinesh Maniyam <dinesh.mani...@intel.com>
> ---
> arch/arm/mach-socfpga/clock_manager_s10.c | 17 ++++++++++++++++-
> 1 file changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-socfpga/clock_manager_s10.c b/arch/arm/mach-
> socfpga/clock_manager_s10.c
> index 4b4f0749db..45300336d5 100644
> --- a/arch/arm/mach-socfpga/clock_manager_s10.c
> +++ b/arch/arm/mach-socfpga/clock_manager_s10.c
> @@ -1,6 +1,6 @@
> // SPDX-License-Identifier: GPL-2.0
> /*
> - * Copyright (C) 2016-2018 Intel Corporation <www.intel.com>
> + * Copyright (C) 2016-2023 Intel Corporation <www.intel.com>
> *
> */
>
> @@ -399,6 +399,21 @@ unsigned int cm_get_l4_sys_free_clk_hz(void)
> return cm_get_l3_main_clk_hz() / 4;
> }
>
> +/*
> + * Override weak dw_spi_get_clk implementation in designware_spi.c
> +driver */
> +
> +int dw_spi_get_clk(struct udevice *bus, ulong *rate) {
> + *rate = cm_get_spi_controller_clk_hz();
> + if (!*rate) {
> + printf("SPI: clock rate is zero");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> void cm_print_clock_quick_summary(void)
> {
> printf("MPU %d kHz\n", (u32)(cm_get_mpu_clk_hz() / 1000));
> --
> 2.26.2
Reviewed-by: Tien Fong Chee <tien.fong.c...@intel.com>
Regards
Tien Fong
