On 18/11/2020 06:29, Icenowy Zheng wrote: > PineCube is an IP camera development kit released by Pine64. > > It comes with the following compoents: > > - A mainboard with Sochip S3 SoC, a 16MByte SPI Flash, AXP209 PMIC, > a power-only microUSB connector, a USB Type-A connector, a 10/100Mbps > Ethernet port and FPC connectors for camera and daughter board. > - An OV5640-based camera module which is connected to the parallel CSI > bus of the mainboard. > - A daughterboard with several buttons, a SD slot, some IR LEDs, a > microphone and a speaker connector. > > As the device tree is synchronized in a previous commit,
It was, but it is missing the line in the dts Makefile: ... dts/Makefile:33: recipe for target 'arch/arm/dts/sun8i-s3-pinecube.dtb' failed ... Can you please add this and resend? And out of curiosity: what's with the Ethernet? Looks like a straight-forward sun8i-emac, doesn't it? Cheers, Andre > just add MAINTAINER item and a defconfig. > > Signed-off-by: Icenowy Zheng <icen...@aosc.io> > --- > Changes in v2: > - Removed LDO3 hack in U-Boot because LDO3 is kept disabled in U-Boot. > > board/sunxi/MAINTAINERS | 5 +++++ > configs/pinecube_defconfig | 15 +++++++++++++++ > 2 files changed, 20 insertions(+) > create mode 100644 configs/pinecube_defconfig > > diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS > index d3755ae41a..735801ae1d 100644 > --- a/board/sunxi/MAINTAINERS > +++ b/board/sunxi/MAINTAINERS > @@ -440,6 +440,11 @@ M: Vasily Khoruzhick <anars...@gmail.com> > S: Maintained > F: configs/pinebook_defconfig > > +PINECUBE BOARD: > +M: Icenowy Zheng <icen...@aosc.io> > +S: Maintained > +F: configs/pinecube_defconfig > + > PINE64 BOARDS > M: Andre Przywara <andre.przyw...@arm.com> > S: Maintained > diff --git a/configs/pinecube_defconfig b/configs/pinecube_defconfig > new file mode 100644 > index 0000000000..a8c404f6b1 > --- /dev/null > +++ b/configs/pinecube_defconfig > @@ -0,0 +1,15 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_SUNXI=y > +CONFIG_SPL=y > +CONFIG_MACH_SUN8I_V3S=y > +CONFIG_SUNXI_DRAM_DDR3_1333=y > +CONFIG_DRAM_CLK=504 > +CONFIG_DRAM_ODT_EN=y > +CONFIG_I2C0_ENABLE=y > +CONFIG_DEFAULT_DEVICE_TREE="sun8i-s3-pinecube" > +CONFIG_SPL_I2C_SUPPORT=y > +# CONFIG_NETDEVICES is not set > +CONFIG_AXP209_POWER=y > +CONFIG_AXP_DCDC2_VOLT=1250 > +CONFIG_AXP_DCDC3_VOLT=3300 > +CONFIG_CONS_INDEX=3 >