Hi Stefan,
On 06/14/13 11:55, Stefan Roese wrote:
Add SPL U-Boot support to replace x-loader on the Compulab cm_t35
board. Currently only the 256MiB SDRAM board versions are supported.
Tested by booting via MMC and NAND.
Signed-off-by: Stefan Roese s...@denx.de
Cc: Tom Rini tr...@ti.com
On Mon, Jun 17, 2013 at 02:53:27PM +0300, Igor Grinberg wrote:
Hi Stefan,
On 06/14/13 11:55, Stefan Roese wrote:
Add SPL U-Boot support to replace x-loader on the Compulab cm_t35
board. Currently only the 256MiB SDRAM board versions are supported.
Tested by booting via MMC and NAND.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 06/17/13 15:38, Tom Rini wrote:
On Mon, Jun 17, 2013 at 02:53:27PM +0300, Igor Grinberg wrote:
Hi Stefan,
On 06/14/13 11:55, Stefan Roese wrote:
Add SPL U-Boot support to replace x-loader on the Compulab cm_t35
board. Currently only the
On 17.06.2013 15:38, Igor Grinberg wrote:
+/*
+ * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
+ * 64 bytes before this address should be set aside for u-boot.img's
+ * header. That is 0x800FFFC0--0x8010 should not be used for any
+ * other needs.
+ */
+#define
4 matches
Mail list logo