Dear Duxiaoqiang,
In message
1c178fd3e32fb24c8b1881fdcc155d8f8faaa...@szxema502-mbx.china.huawei.com you
wrote:
This week I downloaded the latest version of U-Boot and
tested on ARM v8 platform, My boot environment was based on ARM
trusted firmware: arm trusted firmware + Uboot +
Hi Guennadi.
I saw your work about sh mobile.
I have these problem:
1) I have my own board a little bit different than rsk7203; much NOR flash;
much
SDRAM;
2) To know better the structure I'd like to run from NOR flash without reloc.
How can I change noot.lds?
I'd not have the email of
On Wed, 14 Jul 2010, Fabio Giovagnini wrote:
Hi Guennadi.
I saw your work about sh mobile.
I have these problem:
1) I have my own board a little bit different than rsk7203; much NOR flash;
much
SDRAM;
2) To know better the structure I'd like to run from NOR flash without reloc.
How can
Thanks Guennadi.
I hope Nobuhiro san would answer to me.
This is my condition.
I have derived a board based on rsk7203 keeping in mind the hw of rks7203.
But I used 8 MBytes of Nor FLASH and 64 MBytes of SDRAM.
I have potred the linux-2.6.17 given with rsk7203 and I developed the kernel
driver
Thanks Guennadi.
I hope Nobuhiro san would answer to me.
This is my condition.
I have derived a board based on rsk7203 keeping in mind the hw of rks7203.
But I used 8 MBytes of Nor FLASH and 64 MBytes of SDRAM.
I have potred the linux-2.6.17 given with rsk7203 and I developed the kernel
driver
On Tue, 13 Jul 2010, Fabio Giovagnini wrote:
Good morning,
if any of you is involved in such a develop, I'd like to have discussion if
possible about u-boot onto sh architecture
You're probably aware, that U-Boot is already running on SH. So, just post
your specific questions, you might
Hi
Maybe you should read README file from u-boot source code tree.
05.02.10, 17:40, Fabio Giovagnini fabio.giovagn...@aurion-tech.com:
I'm new of the list.
I'd like to build u-Boot for rsk+ 7203
because I designed and produced a board sh2a 7203 based.
I'm in trouble with some errors;
Ok, thanks
Have a nice day
Alle 20:40, venerdì 5 febbraio 2010, Dennis Semakin ha scritto:
Hi
Maybe you should read README file from u-boot source code tree.
05.02.10, 17:40, Fabio Giovagnini fabio.giovagn...@aurion-tech.com:
I'm new of the list.
I'd like to build u-Boot for rsk+ 7203
8 matches
Mail list logo
