I finally resolved the issue:
=> sf probe
SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total
16 MiB
=>
The flash device will be correctly detected.
The problem was missing support in the clock driver of the SoC.
Should I release a patch for it?
On 24.06.20 at 17:52,
Sorry for my late response.
Thanks for the suggestions.
On 22.05.20 at 16:28, Peter Robinson wrote:
> Make sure you enable the driver for the actual flash chip too, some of
> the popular ones are:
> CONFIG_SPI_FLASH_WINBOND=y
> CONFIG_SPI_FLASH_MACRONIX=y
> CONFIG_SPI_FLASH_SPANSION=y
>
On Fri, May 22, 2020 at 12:12 AM Johannes Krottmayer wrote:
>
> Hi Kever,
>
> I think you answered the wrong person. :)
>
> Okay, thanks for the suggestions.
>
> I will check the sources. There was also a missing alias
> in the Device-Tree source. I have added the specific alias
> for the SPI
Hi Kever,
I think you answered the wrong person. :)
Okay, thanks for the suggestions.
I will check the sources. There was also a missing alias
in the Device-Tree source. I have added the specific alias
for the SPI bus. Now I'm getting the error code -2.
I'm new with U-Boot and the source code
Jagan may some idea here.
I would suggest you to add some log in the spi/flash driver for bind,
probe and etc
to check what's wrong.
Thanks,
- Kever
On 2020/5/20 上午7:41, Johannes Krottmayer wrote:
Hello,
I just compiled U-Boot v2020.04 for a PINE64 Rock media board.
It compiles fine
Hello,
I want to add a helper function to uboot i.e
uboot# help
will show a list of commands. I want to add 1 for my own private command.
which file contains the list of cmd that will be displayed and the
indirection?
thanks
-kamal
On Wed, May 20, 2020 at 8:58 AM Johannes Krottmayer
wrote:
>
6 matches
Mail list logo
