Hi Fabio,
Am Mo., 13. Juni 2022 um 19:01 Uhr schrieb Fabio Estevam :
>
> Hi Heiko,
>
> On Fri, Jun 10, 2022 at 7:29 AM Heiko Thiery wrote:
>
> > Hit any key to stop autoboot: 0
> > u-boot=> [25;88R
> > Unknown command '[25' - try 'help'
> > Unknown command '88R' - try 'help'
>
> git bisect
Hi Heiko,
On Fri, Jun 10, 2022 at 7:29 AM Heiko Thiery wrote:
> Hit any key to stop autoboot: 0
> u-boot=> [25;88R
> Unknown command '[25' - try 'help'
> Unknown command '88R' - try 'help'
git bisect points me to an efi loader commit as the guilty one.
Can you please pass the line below into
On Mon, Jun 13, 2022 at 11:27 AM Fabio Estevam wrote:
> U-Boot 2022.07-rc4-7-g57bd363de7 (Jun 13 2022 - 11:18:10 -0300)
>
> CPU: Freescale i.MX8MMQ rev1.0 1600 MHz (running at 1200 MHz)
> CPU: Industrial temperature grade (-40C to 105C) at 60C
> Reset cause: POR
> Model: Kontron i.MX8MM
Hi Fabio,
Am Mo., 13. Juni 2022 um 16:27 Uhr schrieb Fabio Estevam :
>
> Hi Heiko,
>
> On Mon, Jun 13, 2022 at 10:54 AM Heiko Thiery wrote:
>
> > This is the output on the kontron bl-imx8m board:
> >
> > U-Boot SPL 2022.07-rc4-7-g8c3f838be2 (Jun 13 2022 - 15:36:08 +0200)
> > Kontron SL
Hi Heiko,
On Mon, Jun 13, 2022 at 10:54 AM Heiko Thiery wrote:
> This is the output on the kontron bl-imx8m board:
>
> U-Boot SPL 2022.07-rc4-7-g8c3f838be2 (Jun 13 2022 - 15:36:08 +0200)
> Kontron SL i.MX8MM (N801X) module, 1 GB RAM detected
> Touch controller detected, assuming LVDS
Hi Fabio,
Am Sa., 11. Juni 2022 um 13:10 Uhr schrieb Fabio Estevam :
>
> Hi Heiko,
>
> On Sat, Jun 11, 2022 at 3:12 AM Heiko Thiery wrote:
>
> > It took me some effort to get the current u-boot running on my imx8mq.
> > But finally it works and I do not see this garbage on the imx8mq. Next
> >
Hi Heiko,
On Sat, Jun 11, 2022 at 3:12 AM Heiko Thiery wrote:
> It took me some effort to get the current u-boot running on my imx8mq.
> But finally it works and I do not see this garbage on the imx8mq. Next
> week I will check on the kontron_sl_imx8mm.
Thanks, appreciated it!
Hi Fabio,
Am Fr., 10. Juni 2022 um 16:13 Uhr schrieb Heiko Thiery
:
>
> Hi,
>
> Am Fr., 10. Juni 2022 um 15:00 Uhr schrieb Fabio Estevam :
> >
> > Hi Heiko,
> >
> > On Fri, Jun 10, 2022 at 7:29 AM Heiko Thiery wrote:
> > >
> > > Hi,
> > >
> > > I just rebased my pending patch for adding support
Hi,
Am Fr., 10. Juni 2022 um 15:00 Uhr schrieb Fabio Estevam :
>
> Hi Heiko,
>
> On Fri, Jun 10, 2022 at 7:29 AM Heiko Thiery wrote:
> >
> > Hi,
> >
> > I just rebased my pending patch for adding support for the NXP imx8mn
> > ddr3l evk board. When applying on the current master I see some
> >
Hi Heiko,
On Fri, Jun 10, 2022 at 7:29 AM Heiko Thiery wrote:
>
> Hi,
>
> I just rebased my pending patch for adding support for the NXP imx8mn
> ddr3l evk board. When applying on the current master I see some
> garbage on the serial input.
>
> Can anyone confirm that behavior or is it just
Hi Heiko,
On Fri, Jun 10, 2022 at 7:29 AM Heiko Thiery wrote:
>
> Hi,
>
> I just rebased my pending patch for adding support for the NXP imx8mn
> ddr3l evk board. When applying on the current master I see some
> garbage on the serial input.
>
> Can anyone confirm that behavior or is it just
11 matches
Mail list logo