Hi,
On Sun, Jul 12, 2009 at 9:58 PM, Jean-Christophe
PLAGNIOL-VILLARDplagn...@jcrosoft.com wrote:
On 17:10 Sat 11 Jul , Kyungmin Park wrote:
Use the common OneNAND linker script.
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
diff --git
Hello,
I'm trying to optimize the u-boot image I get after compiling. It's size is
13XkB depending on the features I define. I'm using a i.MX31 processor and only
NAND-Flash. I think it should be possible to get a smaller Image.
Are there some common tricks, or do you have some suggestions how
From: u-boot-boun...@lists.denx.de [u-boot-boun...@lists.denx.de] On Behalf Of
Prafulla Wadaskar [prafu...@marvell.com]
Sent: Sunday, July 19, 2009 10:57 AM
To: Wolfgang Denk
Cc: Manas Saksena; Ronen Shitrit; Nicolas Pitre; u-boot@lists.denx.de; Ashish
This patch adds a generic command for programming I2C bootstrap
eeproms on PPC4xx. An implementation for Canyonlands board is
included.
The command name is intentionally chosen not to be PPC4xx specific.
This way other CPU's/SoC's can implement a similar command under
the same name, perhaps with
From: Jean-Christophe PLAGNIOL-VILLARD [plagn...@jcrosoft.com]
Sent: Sunday, July 19, 2009 2:55 AM
To: Prafulla Wadaskar
Cc: u-boot@lists.denx.de; Manas Saksena; Ronen Shitrit; Nicolas Pitre; Ashish
Karkare; Prabhanjan Sarnaik; Lennert Buijtenhek
Subject:
Hello Anatolij,
+initialize the reset line to vcxk hardware and release it from reset
Looking on the changes to board configuration file
include/configs/EB+MCF-EV123.h in the second patch of this series
I now realize that most of these CONFIG_SYS_ macros above expand to
C code, so these
On Friday 17 July 2009 22:26:54 Andrzej Wolski wrote:
Fix incorrect information about size units and correct typo.
Signed-off-by: Andrzej Wolski awol...@poczta.fm
Patch didn't apply clean. I fixed this manually. So, applied to u-boot-ubi.
Thanks.
Best regards,
Stefan
The following changes since commit b86b85e2611d57d834795a92453431a1a340c3c9:
Ilya Yanok (1):
mmc: set bus width to 1 and clock to minimum early during initialization
are available in the git repository at:
git://www.denx.de/git/u-boot-ubi.git master
Andrzej Wolski (1):
ubi:
Hello Alessandro,
Alessandro Rubini wrote:
This adds gpio and i2c support for the Nomadik evaluation kit. They
are needed to turn on the LCD backlight in order to later add LCD
support.
I have one doubt and some questions on gpio:
To use soft_i2c I need to define some macros in the
Thanks TsiChung. That did the trick.
-- Matt
TC Liew wrote:
Matt,
In asm-m68k/io.h, please add
#ifndef _IO_BASE
#define _IO_BASE 0
#endif
Regards,
TsiChung
On Wed, Jul 15, 2009 at 9:43 AM, Matthew Learm...@bubblegen.co.uk wrote:
Hi TsiChung / Wolfgang,
I just pulled u-boot.git
Hello Wolfgang,
Wolfgang Denk wrote:
Dear Alessandro Rubini,
In message cover.1247999841.git.rub...@unipv.it you wrote:
To use soft_i2c I need to define some macros in the config file.
Instead of writing hard numbers there I called the gpio functions, but
the config file is inluded from
Signed-off-by: Heiko Schocher h...@denx.de
---
- changes since v1:
added comments from Prafulla Wadaskar
- changes since v2
added comments from Jean-Christophe
- added speed setting
drivers/i2c/Makefile |1 +
drivers/i2c/kirkwood_i2c.c | 484
I would think should be CONFIG_DRIVERS_PATA_BFIN
I dosagree, the DRIVERS part is just added line noise.
It's a name space - making sure it is differentiated from an option.
Yeah, and we end up with variable names that cannot be used any more
because they exceed the maximum line
Agreed. So we need an gpio_core.c / .h which defines the following
functions (just a proposal):
Yes.
typedef struct gpio_adapter {
int (*init_pin)(int pin);
int (*set)(int pin, value);
int (*get)(int pin);
int (*dir)(int pin, int direction);
Hi all,
I am trying to boot Linux from flash on MIPS Board.
When uBoot tries to boot Linux it fails saying Verifying Checksum
Failed bad data crc.
The bootcmd is fsload 0x8080 /boot/uImage; bootm 0x8080.
But When i do a tftp of the same image(uImage) to same
address(0x8080) it
Hi Ben,
On Saturday 11 July 2009 20:56:06 Alessio Centazzo wrote:
This patch fixes a compilation warning for some Ethernet PHY-less
PPC4xx platforms (440SPE based ones) and a potential compilation
error for 440SP platforms (use of undefined 'ethgroup' variable).
In the original code and in
On Friday 10 July 2009 14:47:32 Dirk Eibach wrote:
In cpu/ppc4xx/speed.c initialization of sysInfo-freqOPB for 405EP was
left out for no obvious reason.
Signed-off-by: Dirk Eibach eib...@gdsys.de
Applied to ppc4xx. Thanks.
Best regards,
Stefan
Felix,
On Wednesday 15 July 2009 11:24:07 Felix Radensky wrote:
I think my first patch that open-coded part of ft_board_setup() related
to EBC ranges
was correct and tested on real hardware. I admit that I didn't test the
second version
of the patch, as I didn't have the hardware at hand.
On Friday 17 July 2009 14:16:40 Dirk Eibach wrote:
Board support for the Guntermann Drunck DL-Vision.
Signed-off-by: Dirk Eibach eib...@gdsys.de
Applied to ppc4xx. Thanks.
Best regards,
Stefan
=
DENX Software Engineering
On Thursday 16 July 2009 22:13:57 Matthias Fuchs wrote:
Some Coding style cleanup (braces, whitespaces, long lines)
Signed-off-by: Matthias Fuchs matthias.fu...@esd.eu
Applied to ppc4xx. Thanks.
Best regards,
Stefan
=
DENX
On Saturday 18 July 2009 02:01:02 Peter Tyser wrote:
The XPedite1000 is a 440gx-based PMC made by X-ES. Support was added
for XPedite100 to U-Boot 5 years ago by Travis Sawyer
(travis.saw...@sandburst.com) independent of X-ES. Sandburst was
bought out by Broadcom some time ago. I attempted
Hello Tom,
Tom wrote:
Omap2 is still pending.
I was hoping to help Richard out with this last week but he was on travel.
There is not much more I think I can do wrt omap2.
All my targets are omap3.
The nearest I can find online is the nokia n8xx which uses a another
bootloader.
The
Hello Alessandro,
Alessandro Rubini wrote:
Agreed. So we need an gpio_core.c / .h which defines the following
functions (just a proposal):
Yes.
typedef struct gpio_adapter {
int (*init_pin)(int pin);
int (*set)(int pin, value);
int (*get)(int pin);
int
what with deinit_pin(pin, function)? That would be in shape with init_pin()?
No, it's not clear what it is. I'd rename init to setup, adding an AF
argument. So I can setup it as AF2, or as GPIO-OUT, or whatever.
(There, we could also unset the marker, that this pin is no longer used
for gpio
Hello Alessandro,
Alessandro Rubini wrote:
what with deinit_pin(pin, function)? That would be in shape with init_pin()?
No, it's not clear what it is. I'd rename init to setup, adding an AF
ok.
argument. So I can setup it as AF2, or as GPIO-OUT, or whatever.
No I don;t understand you ;-)
From: Matthias Fuchs matthias.fu...@esd.eu
Signed-off-by: Matthias Fuchs matthias.fu...@esd.eu
---
include/asm-ppc/gpio.h | 24
1 files changed, 24 insertions(+), 0 deletions(-)
diff --git a/include/asm-ppc/gpio.h b/include/asm-ppc/gpio.h
index fc05dc0..23e29b1 100644
From: Matthias Fuchs matthias.fu...@esd.eu
This patch migrates 4xx code from using the lowercase tcr macro
to the uppercase TCR macro. Both macros have been defined in the past.
So one is to much and uppercase macros are much more common.
The lowercase macro conflicts with the upcoming
Dear Madam/Sir,
our company, Microhard s.r.l, produces data acquisition terminals and in
our new design, which is under development, we use an ARM 9 plattform
based on the AT91SAM9263 microcontroller. Right now our system uses a
NAND Flash chip from Micron MT29F2G08AACWP and out Memory is
Hello Peter,
pty...@xes-inc.com wrote:
From: Peter Tyser pty...@xes-inc.com
Signed-off-by: Peter Tyser pty...@xes-inc.com
---
board/xes/xpedite5370/xpedite5370.c |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/xes/xpedite5370/xpedite5370.c
Works fine! Thanks.
Acked-by: Matthias Fuchs matthias.fu...@esd.eu
On Monday 20 July 2009 08:26, Stefan Roese wrote:
This patch adds a generic command for programming I2C bootstrap
eeproms on PPC4xx. An implementation for Canyonlands board is
included.
The command name is intentionally
From: Matthias Fuchs matthias.fu...@esd.eu
Signed-off-by: Matthias Fuchs matthias.fu...@esd.eu
---
MAINTAINERS |1 +
MAKEALL |1 +
Makefile |3 +
board/esd/pmc405de/Makefile | 53
Hello Peter,
pty...@xes-inc.com wrote:
From: Peter Tyser pty...@xes-inc.com
Signed-off-by: Peter Tyser pty...@xes-inc.com
---
include/configs/P2020DS.h |1 -
include/configs/XPEDITE5170.h |1 -
include/configs/aria.h|1 -
include/configs/mecp5123.h|1 -
Hello Wolfgang,
The following changes since commit b86b85e2611d57d834795a92453431a1a340c3c9:
Ilya Yanok (1):
mmc: set bus width to 1 and clock to minimum early during initialization
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
Peter Tyser (1):
Dear Wolfgang,
2009/7/18 Wolfgang Denk w...@denx.de:
Dear Minkyu Kang,
In message 1f3430fb0907170142l51139f76jed37a47f7760f...@mail.gmail.com you
wrote:
+void raise(void)
+{
+}
Why would that be needed?
Actually this function is workaround.
because of undefined reference error
0x2 *U-Boot (2009.06)*
0x6 *U-Boot Env.*
So two blocks. for u-boot, which is bigger than one block.
the u-boot environment part of the u-boot code is overwritten with the
environment parameters. This happens only when our NAND flash has bad
blocks in the u-boot zone. (Block 1 and
Hi,
Can I modify the oob bytes in NAND using U-boot commands like this:
nand write.oob 0x800 0x0 64 [This should modify the oob bytes of
page 0].
Is this Correct? Please can you suggest on this?
I tried this but no success.
Best Regards
Murali
This E-mail and any
Dear Minkyu Kang,
In message 1f3430fb0907200415n1482bc40s33a44cf3ca439...@mail.gmail.com you
wrote:
Find out which part of your code triggers the use of the _dvmd_lnx.o
code and avoid this; from the error message it seems to be some
(long) division.
yes, we tried it.
but, can't
Dear Rahanesh,
In message 4a642891.2090...@tataelxsi.co.in you wrote:
I am trying to boot Linux from flash on MIPS Board.
When uBoot tries to boot Linux it fails saying Verifying Checksum
Failed bad data crc.
CRC is one type of checksum.
What might be the problem when it is loading
Dear Alessandro Rubini,
In message 20090720080226.ga2...@mail.gnudd.com you wrote:
What about DRV or even D if you insist? CONFIG_D_I2C_SOFT ?
That's longer than needed, and nobody will understand what the D_
stands for.
I personally find the config files pretty unreadable. Options that
Dear Prafulla Wadaskar,
In message 73173d32e9439e4abb5151606c3e19e202ddf27...@sc-vexch1.marvell.com
you wrote:
+ lineno++;
+ if (!(line[0] != '#' strlen(line) != 1))
+ continue;
This is a bit simple-minded. This will for example fail on
Dear Prafulla Wadaskar,
In message 73173d32e9439e4abb5151606c3e19e202de09c...@sc-vexch1.marvell.com
you wrote:
diff --git a/tools/kwbimage.h b/tools/kwbimage.h new file
mode 100644
index 000..c54b701
--- /dev/null
+++ b/tools/kwbimage.h
...
+/* typedefs */
+typedef
Dear Heiko Schocher,
In message 4a6422fc.6030...@invitel.hu you wrote:
typedef struct gpio_adapter {
int (*init_pin)(int pin);
int (*set)(int pin, value);
int (*get)(int pin);
int (*dir)(int pin, int direction);
int (*level)(int pin, int
Dear Heiko Schocher,
In message 4a6437a7.40...@denx.de you wrote:
Also, a board can have more then one gpio adapter, how we address
such a case?
How far do you want to take that? What about an I/O expander at the
I2C bus?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH,
Tom wrote:
Omap2 is still pending.
I was hoping to help Richard out with this last week but he was on travel.
There is not much more I think I can do wrt omap2.
All my targets are omap3.
The nearest I can find online is the nokia n8xx which uses a another
bootloader.
The options as I
Le Thu, 16 Jul 2009 09:52:43 -0500,
Peter Tyser pty...@xes-inc.com a écrit :
I don't have the final say here, I'm just giving my opinion. If it
was possible to clean up, the best way in my would be to fix your
board (ie this patch), then send a separate follow-up patch fixing
other boards. I
Le Fri, 17 Jul 2009 21:41:43 +0200,
Wolfgang Denk w...@denx.de a écrit :
Entries to maintainers is missing.
Yes, it was missing in the initial version of my patch, but further
versions got it added, thanks to other people review.
+int dram_init(void)
+{
+ gd-bd-bi_dram[0].start =
Minkyu Kang wrote:
Because of the reset_cpu is soc specific, should be move to soc
Thanks, looks fine for me.
For the archives, this makes
http://lists.denx.de/pipermail/u-boot/2009-May/053490.html
obsolete.
Dirk
Cc: Dirk Behme dirk.be...@googlemail.com
Signed-off-by: Minkyu Kang
On Mon, 2009-07-20 at 17:40 +0200, Thomas Petazzoni wrote:
Le Thu, 16 Jul 2009 09:52:43 -0500,
Peter Tyser pty...@xes-inc.com a écrit :
I don't have the final say here, I'm just giving my opinion. If it
was possible to clean up, the best way in my would be to fix your
board (ie this
On 04 Oct 2008 Pieter posted a dns implementation for U-Boot.
http://www.mail-archive.com/u-boot-us...@lists.sourceforge.net/msg10216.html
DNS can be enabled by setting CFG_CMD_DNS. After performing a query,
the serverip environment var is updated.
Probably there are some cosmetic issues
On 2009-07-19, at 04:22, Mike Frysinger wrote:
Signed-off-by: Mike Frysinger vap...@gentoo.org
---
common/exports.c |8
include/_exports.h |8
include/exports.h |3 ++-
3 files changed, 18 insertions(+), 1 deletions(-)
diff --git a/common/exports.c
Dear Robin Getz,
In message 200907192355.41601.rg...@blackfin.uclinux.org you wrote:
People responsible for the archicture/CPU core may set things up, and
not want anyone to change things - on any SoC or Board.
People responsible for SoC developments should be able to take what
the arch
Dear Ulrich Gerster,
In message 4a64285f024d00014...@hochblauen.ba-loerrach.de you wrote:
I'm trying to optimize the u-boot image I get after compiling. It's size is
13XkB depending on the features I define. I'm using a i.MX31 processor and
only NAND-Flash. I think it should be
Dear matthias.fu...@esd.eu,
In message 12480849383077-git-send-email-matthias.fu...@esd.eu you wrote:
This patch migrates 4xx code from using the lowercase tcr macro
to the uppercase TCR macro. Both macros have been defined in the past.
So one is to much and uppercase macros are much more
Dear matthias.fu...@esd.eu,
In message 12480877043650-git-send-email-matthias.fu...@esd.eu you wrote:
From: Matthias Fuchs matthias.fu...@esd.eu
Signed-off-by: Matthias Fuchs matthias.fu...@esd.eu
It would really be nice if you marked new versions of older
submissions as such, and added some
Dear Kim Phillips,
In message 20090718200944.7c9d3eec.kim.phill...@freescale.com you wrote:
Hello Wolfgang D.,
I realize this is very last-minute, but converting 83xx PCI has been
overdue for a while now, and I'm expecting enough time to test before
the next release. So, if there are no
Dear Mike Frysinger,
In message 1247966220-23627-1-git-send-email-vap...@gentoo.org you wrote:
The following changes since commit d39041fcadb1231430201d298c31f6be03d654f7:
Wolfgang Denk (1):
PATI board: fix compiler warnings
are available in the git repository at:
Dear Stefan Roese,
In message 200907200927.39207...@denx.de you wrote:
The following changes since commit b86b85e2611d57d834795a92453431a1a340c3c9:
Ilya Yanok (1):
mmc: set bus width to 1 and clock to minimum early during
initialization
are available in the git repository at:
Dear Heiko Schocher,
In message 4a64516d.4020...@denx.de you wrote:
Hello Wolfgang,
The following changes since commit b86b85e2611d57d834795a92453431a1a340c3c9:
Ilya Yanok (1):
mmc: set bus width to 1 and clock to minimum early during
initialization
are available in the git
Dear Thomas Petazzoni,
In message 20090720174220.1800d...@surf you wrote:
Any specific reason for not using autosizing and testing via
get_ram_size() ?
The initial reason is that the code for this board is taken from the
Atmel boards code, which doesn't use get_ram_size(). However, my
Atmel DataFlashes by default operate with pages with 1056 byte pages. They
also have a power of 2 mode where the pages are 1024 bytes in size.
Page size is not always 1056/1024 bytes, it is depended on total memory
size.
+ if (flash_set_pow2(slave)) {
+
Dear Kyungmin Park,
In message 9c9fda240907192016i32c7312dh490629f2f2bb3...@mail.gmail.com you
wrote:
/* read a page with ECC */
static inline int onenand_read_page(ulong block, ulong page,
u_char * buf , int pagesize)
{
+#ifdef CONFIG_S5PC1XX
+
Dear Giuseppe CONDORELLI,
In message 1246273458-19028-1-git-send-email-giuseppe.condore...@st.com you
wrote:
This patch updates zlib to the latest stable version.
Only relevant zlib parts were ported to u-boot tree, as already did for the
current zlib (0.95). New zlib guarantees a faster
Dear Simon Kagstrom,
In message 20090707155734.4b757...@marrow.netinsight.se you wrote:
UBIFS requires fls(), which is not defined for arm (and some other
architectures) and this patch adds it. The implementation is taken from
Linux and is generic. ffs() is also defined for those that miss it.
Dear Simon Kagstrom,
In message 20090707155851.7dced...@marrow.netinsight.se you wrote:
This patch adds unaligned.h for ARM (needed to build with LZO
compression). The file is taken from the linux kernel, but includes
u-boot headers instead.
Signed-off-by: Simon Kagstrom
Dear Simon Kagstrom,
In message 20090707155927.78e75...@marrow.netinsight.se you wrote:
Signed-off-by: Simon Kagstrom simon.kagst...@netinsight.net
---
lib_generic/vsprintf.c |7 +--
1 files changed, 1 insertions(+), 6 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
Dear Kumar Gala,
In message 124701-22858-1-git-send-email-ga...@kernel.crashing.org you
wrote:
From: galak ga...@ducky.am.freescale.net
Update fsl_sata to use common structures instead of casting
back and forth between the fsl specific ones and the common ones
(which are identical).
Dear Luigi 'Comio' Mantellini,
In message 1246985548-24183-1-git-send-email-luigi.mantellini...@gmail.com
you wrote:
--===1785671948==
From: Luigi 'Comio' Mantellini luigi.mantell...@idf-hit.com
---
common/cmd_bootm.c |5 +-
include/lzma/LzmaDec.h
Dear Simon Kagstrom,
In message 20090720214252.b0b6e832e...@gemini.denx.de I wrote:
Dear Simon Kagstrom,
In message 20090707155927.78e75...@marrow.netinsight.se you wrote:
Signed-off-by: Simon Kagstrom simon.kagst...@netinsight.net
---
lib_generic/vsprintf.c |7 +--
1 files
Dear Jean-Christophe PLAGNIOL-VILLARD,
In message 1247085496-21754-2-git-send-email-plagn...@jcrosoft.com you wrote:
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
---
board/netstar/Makefile |3 +--
board/voiceblue/Makefile |3 +--
2 files changed, 2
Dear Heiko Schocher,
In message 4a55c0a2.2010...@denx.de you wrote:
- CONFIG_SYS_MAX_I2C_BUS changed to 1
We use only one I2C hardwarecontroller on this boards, so
change the CONFIG_SYS_MAX_I2C_BUS to 1.
- common: dont print errormsg if second IVM Block lacks.
- 82xx, mgcoge: fix double
Dear ratbert.chu...@gmail.com,
In message 1247221534-26150-1-git-send-email-ratbert.chu...@gmail.com you
wrote:
From: Po-Yu Chuang ratb...@faraday-tech.com
Signed-off-by: Po-Yu Chuang ratb...@faraday-tech.com
---
.gitignore |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
Dear Peter Tyser,
In message 1247241800-29059-2-git-send-email-pty...@xes-inc.com you wrote:
This cleans up U-Boot's toplevel directory a bit and makes the
architecture 'config.mk' file naming and location similar to board and
cpu 'config.mk' files
Signed-off-by: Peter Tyser
Dear Peter Tyser,
In message 1247241800-29059-7-git-send-email-pty...@xes-inc.com you wrote:
Signed-off-by: Peter Tyser pty...@xes-inc.com
---
Makefile|4 ++--
{api_examples = examples/api}/.gitignore |0
{api_examples = examples/api}/Makefile
Dear Peter Tyser,
In message 1248033674.15400.9.ca...@ptyser-laptop you wrote:
On Sat, 2009-07-18 at 20:07 +0200, Wolfgang Denk wrote:
Dear Peter Tyser,
In message 1247935062.9174.14.ca...@ptyser-laptop you wrote:
I'd still vote for changing the directory structure in this release,
Dear Liu Dave-R63238,
In message
d7cca83bb0796c49bc0bb53b6ab12089515...@zch01exm21.fsl.freescale.net you wrote:
Previously, non-e500 architectures only unlocked their data
cache which
was used as early RAM when booting to Linux using the bootm command.
This change causes all PPC boards
On Tue, 2009-07-21 at 00:15 +0200, Wolfgang Denk wrote:
Dear Peter Tyser,
In message 1248033674.15400.9.ca...@ptyser-laptop you wrote:
On Sat, 2009-07-18 at 20:07 +0200, Wolfgang Denk wrote:
Dear Peter Tyser,
In message 1247935062.9174.14.ca...@ptyser-laptop you wrote:
I'd
I've tested this on 86xx boards, it'd be great if someone
could test on
83xx and 74xx/7xx. 85xx boards should not be affected by
this change.
This change assumes
http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/63423
has already been applied, or the lib/ppc patches
Also add a rule to remove demo.bin which was previously leftover after a
make clean
Signed-off-by: Peter Tyser pty...@xes-inc.com
---
Changes since v2:
- Clean up demo.bin
- rebased
Makefile|5 +++--
{api_examples = examples/api}/.gitignore |0
S5PC100 has own OneNAND controller and has different interface.
OneNAND IPL use it to S5PC100 board.
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
diff --git a/onenand_ipl/onenand_ipl.h b/onenand_ipl/onenand_ipl.h
index 412572a..b43ddfb 100644
--- a/onenand_ipl/onenand_ipl.h
+++
On Tue, Jul 21, 2009 at 6:18 AM, Wolfgang Denkw...@denx.de wrote:
Dear Kyungmin Park,
In message 9c9fda240907192016i32c7312dh490629f2f2bb3...@mail.gmail.com you
wrote:
/* read a page with ECC */
static inline int onenand_read_page(ulong block, ulong page,
From: Peter Tyser pty...@gmail.com
- Fix command help message
- Disable DEBUG by default
- Fix whitespace issues
- Fix lines 80 characters
Signed-off-by: Peter Tyser pty...@gmail.com
---
common/cmd_tsi148.c | 85 ++
1 files changed, 44
Remove unused read_spareram and add unlock_all as kernel does
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
diff --git a/drivers/mtd/onenand/onenand_base.c
b/drivers/mtd/onenand/onenand_base.c
index d482437..368fa6e 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++
On Tuesday 21 July 2009 04:51:38 pty...@xes-inc.com wrote:
From: Peter Tyser pty...@gmail.com
- Fix command help message
- Disable DEBUG by default
- Fix whitespace issues
- Fix lines 80 characters
Thanks Peter.
Signed-off-by: Peter Tyser pty...@gmail.com
Acked-by: Stefan Roese
Hello Wolfgang,
Wolfgang Denk wrote:
Dear Heiko Schocher,
In message 4a55c0a2.2010...@denx.de you wrote:
- CONFIG_SYS_MAX_I2C_BUS changed to 1
We use only one I2C hardwarecontroller on this boards, so
change the CONFIG_SYS_MAX_I2C_BUS to 1.
- common: dont print errormsg if second IVM
Hi Robin,
Robin Getz wrote:
On 04 Oct 2008 Pieter posted a dns implementation for U-Boot.
http://www.mail-archive.com/u-boot-us...@lists.sourceforge.net/msg10216.html
DNS can be enabled by setting CFG_CMD_DNS. After performing a query,
the serverip environment var is updated.
Probably
Mike,
Mike Frysinger wrote:
The net code is mostly consistent in using 'Packet' rather than 'Pkt', so
rename the minor detractor to follow suite.
Signed-off-by: Mike Frysinger vap...@gentoo.org
---
include/net.h |4 ++--
net/bootp.c |2 +-
net/net.c |8
3
Kim,
Kim Phillips wrote:
fix this gcc 4.4 warning:
tsec.c: In function 'tsec_init':
tsec.c:200: warning: dereferencing type-punned pointer will break
strict-aliasing rules
Signed-off-by: Kim Phillips kim.phill...@freescale.com
---
this is the endian-correct version
drivers/net/tsec.c
Mike Frysinger wrote:
Signed-off-by: Mike Frysinger vap...@gentoo.org
---
Ben: some things to note:
- i adopted Jean's proposed naming scheme in the CONFIG section
Is this a generally-accepted naming convention? I personally think it's
crap, and since there isn't a single driver
Richard,
Richard Retanubun wrote:
From d4c7dd98ac9a3f6fc4949079b84d7d811376cf3d Mon Sep 17 00:00:00 2001
From: Richard Retanubun richardretanu...@ruggedcom.com
Date: Thu, 2 Jul 2009 13:12:03 -0400
Subject: [PATCH] MIIPHYBB: Return 0x if the PHY is not asserting TA.
This patch sets the
Simon Kagstrom wrote:
kwgbe_send/recv both have loops waiting for the hardware to set a bit.
GCC 4.3.3 cleverly optimizes the send case to ... a while(1); loop. This
patch uses readl to force a read from device memory. Other volatile
accesses have also been replaced with readl/writel where
Simon Kagstrom wrote:
The Marvell documentation for the 88f6281 states that the error coding
is only valid if the error summary and last frame bits in the transmit
descriptor status field are set. This patch adds checks for these for
transmit (I would get transmit errors on bootp with the
Simon,
Simon Kagstrom wrote:
U-boot might use non-8-byte-aligned addresses for sending data, which
the kwgbe_send doesn't accept (bootp does this for me). This patch
copies the data to be sent to a temporary buffer if it is non-aligned.
Signed-off-by: Simon Kagstrom
Stefan,
Can I get an ACK from you on this? Sorry if you already did and I missed it.
regards,
Ben
Alessio Centazzo wrote:
This patch fixes a compilation warning for some Ethernet PHY-less
PPC4xx platforms (440SPE based ones) and a potential compilation
error for 440SP platforms (use of
93 matches
Mail list logo
