Hi Tom,
Tom Rix wrote:
Only the boot_flash_* variables that are used by #defines in
the OMAP3 config files should have declarations.
This patch removes the unneeded declarations.
Not all of the boot_flash_* declarations are needed by all of
the boards. The set for each board was
Hi Wolfgang,
On Tuesday 17 November 2009 22:22:23 Wolfgang Denk wrote:
flash_sect_erase() displays message Erased #N sectors even when
there are some protected sectors found and command erase fail.
Applied to u-boot-cfi-flash/master. Thanks.
Sory, but you were too fast for me. Please
i'm curious as to why common/Makefile hardcodes the compilation of
cmd_pcmcia.c thusly:
COBJS-y += cmd_pcmcia.o
since i'm interested in building for a beagleboard, i have no interest
in PCMCIA support, yet that source file will be compiled for me, even
though the selection macro
This patch add a S3C2410-based ARM study platform GEC2410 support.
Signed-off-by: Hui.Tang zetal...@gmail.com
---
total: 0 errors, 0 warnings, 1302 lines checked
0001-ARM-Add-New-Board-GEC2410.patch has no obvious style problems and is ready
for submission.
MAINTAINERS
-Original Message-
From: Dirk Behme [mailto:dirk.be...@googlemail.com]
Sent: Wednesday, November 18, 2009 1:01 PM
To: Hiremath, Vaibhav
Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] [PATCH] OMAP3EVM: Added NAND support
hvaib...@ti.com wrote:
From: Vaibhav Hiremath
From: Vaibhav Hiremath hvaib...@ti.com
Signed-off-by: Vaibhav Hiremath hvaib...@ti.com
---
include/configs/omap3_evm.h | 10 +-
1 files changed, 9 insertions(+), 1 deletions(-)
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index a5514ae..fbc45dc 100644
---
It would have been nice if subject had a 'v2' now.
hvaib...@ti.com wrote:
From: Vaibhav Hiremath hvaib...@ti.com
Patch description missing here now. And if you re-add, it would be
good to mention that you switch from ONENAND to NAND, too.
Signed-off-by: Vaibhav Hiremath hvaib...@ti.com
---
This patch add nand_read_buf() for S3C2410 NAND SPL.
In nand_spl/nand_boot.c, nand_boot() will check nand-select_chip,
so nand-select_chip should also be initialized.
Signed-off-by: Hui.Tang zetal...@gmail.com
---
drivers/mtd/nand/s3c2410_nand.c | 31 +++
1 files
On 17/11/09 23:10, Wolfgang Denk wrote:
Dear Paulraj, Sandeep,
In message 0554bef07d437848af01b9c9b5f0bc5d93f2f...@dlee01.ent.ti.com you
wrote:
Provides initial support for TI OMAP-L1x/DA8xx SoC devices.
See http://www.ti.com
The DA8xx devices are similar to DaVinci devices but have a
Collect object files corresponding to the same CONFIG variable on the
same line for better readability.
Signed-off-by: Robert P. J. Day rpj...@crashcourse.ca
---
clearly no *functional* difference but it follows the standard set
out in the rest of the file. compile tested for a beagle, for
Collect object files corresponding to the same CONFIG variable on the
same line for better readability.
Signed-off-by: Robert P. J. Day rpj...@crashcourse.ca
---
clearly no *functional* difference but it follows the standard set
out in the rest of the file. compile tested for a beagle, for
Hi,
I am compiling latest u-boot code for ppc440x5.
My board is having 16MB nor flash, have I modified following parameter.
CONFIG_SYS_FLASH_BASE 0xfc00
TEXT_BASE 0xfcfc
bootpg 0xfcfff000
With these changes I am getting following error.
-Original Message-
From: Dirk Behme [mailto:dirk.be...@googlemail.com]
Sent: Wednesday, November 18, 2009 2:07 PM
To: Hiremath, Vaibhav
Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] [PATCH] OMAP3EVM: Added NAND support
It would have been nice if subject had a 'v2' now.
This is not the sequoia board.
Signed-off-by: Matthias Fuchs matthias.fu...@esd.eu
---
board/esd/pmc440/config.mk |4
1 files changed, 0 insertions(+), 4 deletions(-)
diff --git a/board/esd/pmc440/config.mk b/board/esd/pmc440/config.mk
index 0c4d582..91e65ec 100644
---
Newsletter Retefin
Servizi finanziari offerti da Gruppo Retefin
GENTILE UTENTE, CON LA PRESENTE MAIL PROPONIAMO ALLA SUA CORTESE ATTENZIONE IL
NOSTRO INVITO PER RICHIEDERLE CORTESE CONSENSO ALL' INVIO DI SUCCESSIVE MAIL
INFORMATIVE RELATIVE AL NOSTRO PORTALE WEB:
SE NON CONFERMA L'ISCRIZIONE
Robert,
Robert P. J. Day wrote:
i'm curious as to why common/Makefile hardcodes the compilation of
cmd_pcmcia.c thusly:
COBJS-y += cmd_pcmcia.o
since i'm interested in building for a beagleboard, i have no interest
in PCMCIA support, yet that source file will be compiled for me, even
On Wed, Nov 18, 2009 at 12:09:46AM +0100, Wolfgang Denk wrote:
In message 4af9823c.8090...@gefanuc.com you wrote:
Provides initial support for TI OMAP-L1x/DA8xx SoC devices.
See http://www.ti.com
The DA8xx devices are similar to DaVinci devices but have a differing
memory map and
On Wed, Nov 18, 2009 at 10:29:17AM +0100, Wolfgang Denk wrote:
Signed-off-by: Wolfgang Denk w...@denx.de
---
COPYING |9 -
1 files changed, 8 insertions(+), 1 deletions(-)
diff --git a/COPYING b/COPYING
index f616ab9..9930863 100644
--- a/COPYING
+++ b/COPYING
@@ -1,4 +1,11
On Wed, Nov 18, 2009 at 12:58 AM, hvaib...@ti.com wrote:
From: Vaibhav Hiremath hvaib...@ti.com
User can now choose between NAND and ONENAND support in omap3_evm.h
Signed-off-by: Vaibhav Hiremath hvaib...@ti.com
---
include/configs/omap3_evm.h | 27 ++-
1 files
Nishanth Menon wrote:
+
+#define WRITE_NAND_COMMAND(d, adr)\
+ writel(d, nand_cs_base-nand_cmd)
writel? i thought u had 16 bit nand device.
+#define WRITE_NAND_ADDRESS(d, adr)\
+ writel(d, nand_cs_base-nand_adr)
+#define WRITE_NAND(d, adr)
-Original Message-
From: Nishanth Menon [mailto:menon.nisha...@gmail.com]
Sent: Wednesday, November 18, 2009 11:38 PM
To: Hiremath, Vaibhav
Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] [PATCH] OMAP3EVM: Added NAND support
On Wed, Nov 18, 2009 at 12:58 AM, hvaib...@ti.com
Dear Scott Wood,
In message 20091118180115.gb15...@loki.buserror.net you wrote:
+ U-Boot is free software. It is copyrighted by Wolfgang Denk and
+many others who contributed code (see the actual source code for
+details). You can redistribute U-Boot and/or modify it under the
+terms of
Wolfgang Denk wrote:
Dear Scott Wood,
In message 20091118180115.gb15...@loki.buserror.net you wrote:
+ U-Boot is free software. It is copyrighted by Wolfgang Denk and
+many others who contributed code (see the actual source code for
+details). You can redistribute U-Boot and/or modify it
On Mon, Nov 16, 2009 at 05:49:55PM +, Nick Thompson wrote:
static void nand_davinci_enable_hwecc(struct mtd_info *mtd, int mode)
{
- int dummy;
+ u_int32_t val;
- dummy = emif_regs-NANDF1ECC;
+ val = readl(emif_regs-NANDF1ECC);
val = can be
On Mon, Nov 16, 2009 at 01:32:01PM -0500, s-paul...@ti.com wrote:
From: Sandeep Paulraj s-paul...@ti.com
This patch updates a check condition in the NAND driver.
The check condition is similat to what is in linux/next.
Hmm, even in Linux all other invocations of ecc.correct check 0 rather
On Mon, Nov 16, 2009 at 01:31:47PM -0500, s-paul...@ti.com wrote:
From: Sandeep Paulraj s-paul...@ti.com
NANDs with page size of lesser than and equal to 2K are
reaching EOL. They are bing replaced with NANDs of
page size 4K and above.
To support this we have to extend the eccpos field
On Mon, Nov 16, 2009 at 05:49:55PM +, Nick Thompson wrote:
static void nand_davinci_enable_hwecc(struct mtd_info *mtd, int mode)
{
- int dummy;
+ u_int32_t val;
- dummy = emif_regs-NANDF1ECC;
+ val = readl(emif_regs-NANDF1ECC);
val = can be
On Wed, Nov 18, 2009 at 04:24:04PM +0800, Hui.Tang wrote:
This patch add nand_read_buf() for S3C2410 NAND SPL.
In nand_spl/nand_boot.c, nand_boot() will check nand-select_chip,
so nand-select_chip should also be initialized.
Signed-off-by: Hui.Tang zetal...@gmail.com
Applied to
Dear Scott Wood,
In message 20091118202216.ga15...@loki.buserror.net you wrote:
On Mon, Nov 16, 2009 at 05:49:55PM +, Nick Thompson wrote:
static void nand_davinci_enable_hwecc(struct mtd_info *mtd, int mode)
{
- int dummy;
+ u_int32_t val;
- dummy =
Dear Albert Aribaud,
In message 1258239796-21528-2-git-send-email-albert.arib...@free.fr you wrote:
This patch adds support for the Marvell Orion5x SoC.
It has no use alone, and must be followed by a patch
to add Orion5x support for serial, then support for
the ED Mini V2, an Orion5x-based
Dear Albert Aribaud,
In message 1258239796-21528-4-git-send-email-albert.arib...@free.fr you wrote:
This board is based on the Marvell Orion5x SoC.
Current support is limited to console and Flash.
Flash support uses LEGACY as the Macronix 29LV400
used on ED Mini V2 is not 100% CFI compliant.
Dear Sandeep,
In message 0554bef07d437848af01b9c9b5f0bc5d94158...@dlee01.ent.ti.com you
wrote:
Sorry for asking stupid questions - but which sort of conflict do you
see in this text? The licensing seems to be OK with me (reference to
COPYING file in the top level directory), and the
Dear Mike Frysinger,
In message 200911171918.39290.vap...@gentoo.org you wrote:
I don't know whether Linux has a specific policy on this, but I haven't
noticed many problems in this regard, and when I did find one in the
kernel a few years back I didn't get any argument when I submitted
Dear =?UTF-8?B?IlNldW5naHllb24gUmhlZSAo7J207Iq57ZiEKSI=?=,
In message 4b035ee8.90...@lpmtec.com you wrote:
I think this patch is not an improvement. Now it prints Not erased
even when sectors _have_ successfully been earased, which is at least
as wrong als the old behaviour.
...
As you
Dear Robert P. J. Day,
In message alpine.lfd.2.00.0911180024280.13...@localhost you wrote:
p.s. is there a trivial patch email address for simple things like
typoes, just to keep this main list for more important stuff?
No. All patches shall go though a central place (i. e. this list).
Dear Hui Tang,
In message f9f0f3cf0911172255n73b44b41if851e7f9cc052...@mail.gmail.com you
wrote:
Dear Wolfgang,
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/gec/gec2410
Why is this needed?
in /board/gec/gec2410/lowlevel_init.S, it includes gec2410_mem.h,
which is at
Dear Nick Thompson,
In message 4b03bd0c.7080...@gefanuc.com you wrote:
I'm happy to submit a new patch to lowercase these enums if you
think that would be a good idea. It might be inviting trouble,
but I'm not aware of any outstanding patches that rely on these
values directly.
I'm sorry,
Dear Joakim Tjernlund,
In message
offb1b0130.66ea-onc1257672.00315799-c1257672.003a0...@transmode.se you
wrote:
This was a reply for Mikes comment on
[PATCH v2] crc32: Impl. linux optimized crc32()
If it was a reply to [PATCH v2] crc32: ... then why didn't the
Subject read Re: [PATCH
Hi Wolfgang,
Wolfgang Denk a écrit :
88f5182 is a terrible file name. Can you not come up with something
more descriptive, please?
Actually, the name is based on the actual name of the Marvell SoC variant.
Why do we need an Orion5x-specific GPIO API? Can't we use something
that is more
Wolfgang Denk w...@denx.de wrote on 18/11/2009 23:45:56:
Dear Joakim Tjernlund,
In message OFFB1B0130.66EA-ONC1257672.00315799-C1257672.
003a0...@transmode.se you wrote:
This was a reply for Mikes comment on
[PATCH v2] crc32: Impl. linux optimized crc32()
If it was a reply to
On Wednesday 18 November 2009 17:28:46 Wolfgang Denk wrote:
Mike Frysinger wrote:
I don't know whether Linux has a specific policy on this, but I
haven't noticed many problems in this regard, and when I did find one
in the kernel a few years back I didn't get any argument when I
On Wednesday 18 November 2009 17:59:59 Joakim Tjernlund wrote:
Wolfgang Denk wrote on 18/11/2009 23:45:56:
Joakim Tjernlund wrote:
And PLEASE keep the In-reply-to: and References: headers so threading
of the messages works.
Since this was a new email sent with git, I don't
Mike Frysinger vap...@gentoo.org wrote on 19/11/2009 00:45:16:
On Wednesday 18 November 2009 17:59:59 Joakim Tjernlund wrote:
Wolfgang Denk wrote on 18/11/2009 23:45:56:
Joakim Tjernlund wrote:
And PLEASE keep the In-reply-to: and References: headers so threading
of the messages
On Wednesday 18 November 2009 06:01:52 Robert P. J. Day wrote:
Collect object files corresponding to the same CONFIG variable on the
same line for better readability.
clearly no *functional* difference but it follows the standard set
out in the rest of the file. compile tested for a
On Wednesday 18 November 2009 03:17:21 Robert P. J. Day wrote:
i'm curious as to why common/Makefile hardcodes the compilation of
cmd_pcmcia.c thusly:
COBJS-y += cmd_pcmcia.o
since i'm interested in building for a beagleboard, i have no interest
in PCMCIA support, yet that source file
The help message for the 'bootm' command listed the 'cmdline' and 'bdt'
sub-commands in the wrong order which resulted in the error below when
following the 'help' command's instructions:
Trying to execute a command out of order
Signed-off-by: Peter Tyser pty...@xes-inc.com
---
Feel free to
On Mon, Nov 16, 2009 at 8:59 PM, Ben Warren biggerbadder...@gmail.com wrote:
Hi Alfred,
alfred steele wrote:
Thanks for your submission!
What is the current design on the mxc fec interface's attainment of a
MAC address. From the kernel driver it looks like it looks at the
IIM(IC
Alfred,
On Wed, Nov 18, 2009 at 5:54 PM, alfred steele alfred.jaq...@gmail.comwrote:
On Mon, Nov 16, 2009 at 8:59 PM, Ben Warren biggerbadder...@gmail.com
wrote:
Hi Alfred,
alfred steele wrote:
Thanks for your submission!
What is the current design on the mxc fec interface's
Special Package for this week
Board Certified Physicians in America
788,445 in total * 17,710 emails
Many popular specialties like Emergency Medicine, Plastic Surgery, OBGYN,
Oncology, Pediatrics and more
16 different sortable fields
Pharmaceutical Companies in the USA
Personal email
Hi u-boot experts,
Now our arm board is based on u-boot v2009.08 and I need to use
ubifs.
So I replace some files from u-boot's latest version.
They are:
fs/ubifs/ubifs.c
fs/ubifs/ubifs.h
include/asm-arm/bitops.h
include/linux/bitops.h
and define the
Remy,
-Original Message-
From: u-boot-boun...@lists.denx.de
[mailto:u-boot-boun...@lists.denx.de] On Behalf Of Gupta, Ajay Kumar
Sent: Tuesday, November 17, 2009 7:35 PM
To: u-boot@lists.denx.de
Subject: Re: [U-Boot] [PATCH 3/4 v5] DA8xx: Add MUSB host support
Remy,
Any
Hello everyone,
I have a LPC2468 board and currently play with u-boot. U-boot version
is 1.1.6 from Embedded Artists. I've already made u-boot loading and
executing user commands. Everything seems works fine, except the
memory test (mtest) command:
lpc-board# mtest
Pattern Writing...
This patch is to save environment data to mmc card.
It uses interfaces defined in generic mmc.
Signed-off-by: Terry Lv r65...@freescale.com
---
common/Makefile |1 +
common/cmd_nvedit.c |3 +-
common/env_mmc.c | 166 +
Hi Albert,
On Wednesday 18 November 2009 23:21:58 Wolfgang Denk wrote:
This board is based on the Marvell Orion5x SoC.
Current support is limited to console and Flash.
Flash support uses LEGACY as the Macronix 29LV400
used on ED Mini V2 is not 100% CFI compliant.
And the differences
54 matches
Mail list logo
