h8300 have simlar sh serial I/F.
It without FIFO.
This changes support of no FIFO.
Signed-off-by: Yoshinori Sato ys...@users.sourceforge.jp
---
drivers/serial/serial_sh.c | 74 +++---
drivers/serial/serial_sh.h | 93 +++-
2
This part EDOSK2674 support
more infomation is
http://www.renesas.eu/products/tools/introductory_evaluation_tools/evaluation_development_os_kits/edosk2674r/edosk2674r_software_tools_root.jsp
Signed-off-by: Yoshinori Sato ys...@users.sourceforge.jp
---
board/edosk2674/Makefile| 48
Hi lists,
This patches added new target EDOSK2674.
Please comments.
Thanks.
Yoshinori Sato (5):
Add h8300 architecture part1 - core
Add h8300 architecture part2 - headers
Add h8300 architecture part3 - misc
standard SCI support
Add target edosk2674
arch/h8300/config.mk
This part h8300 cpu support (2/3).
Signed-off-by: Yoshinori Sato ys...@users.sourceforge.jp
---
arch/h8300/include/asm/bitops.h | 186 ++
arch/h8300/include/asm/byteorder.h |6 +
arch/h8300/include/asm/config.h | 26 +
From: Po-Yu Chuang ratb...@faraday-tech.com
Monitor protection region in FLASH did not cover .rel.dyn
and .dynsym sections, because it uses __bss_start to compute
monitor_flash_len. Use _end instead.
Add _end to linker scripts for end of u-boot image
Add _end_ofs to all the start.S.
On 03/02/2011 02:31 AM, Estevam Fabio-R49496 wrote:
Hi Stefano,
Hi Fabio,
Ping?
As I do not see any fix for the current release, I have not yet merged
it into u-boot-imx and I will do it when the window is open again. I
imagine your patch is an introduction for further patches, where more
Hello Alexander,
Am 02.03.2011 00:13, schrieb Jason Kridner:
On Fri, Feb 18, 2011 at 3:37 AM, Alexander Holler hol...@ahsoftware.de
wrote:
Linux kernels = 2.6.36 are using ttyOn instead ttySn for the
serials on OMAPs.
Signed-off-by: Alexander Holler hol...@ahsoftware.de
Ack.
---
Hello,
Am 02.03.2011 11:50, schrieb Thomas Weber:
Hello Alexander,
Am 02.03.2011 00:13, schrieb Jason Kridner:
On Fri, Feb 18, 2011 at 3:37 AM, Alexander Hollerhol...@ahsoftware.de
wrote:
Linux kernels= 2.6.36 are using ttyOn instead ttySn for the
serials on OMAPs.
...
can you please
On Wed, 23 Feb 2011 23:32:01 +0100
Anatolij Gustschin ag...@denx.de wrote:
Hi,
On Tue, 22 Feb 2011 17:34:30 +0100
jacopo mondi j.mo...@voltaelectronics.com wrote:
...
Second issue is related to enc identification.
The following code section:
phid1 = phy_read(enc,
Implementation of receive-transmit mode for
omap3 MCSPI.
Introduces full duplex communication, needed by
some spi devices (such as enc28j60).
Signed-off-by: jacopo mondi mo...@cs.unibo.it j.mo...@voltaelectronics.com
---
drivers/spi/omap3_spi.c | 66
On 3/2/2011 6:15 AM, Stefano Babic wrote:
...
As I do not see any fix for the current release, I have not yet merged
it into u-boot-imx and I will do it when the window is open again. I
imagine your patch is an introduction for further patches, where more as
one uart is used, right ? Should it
Stefan,
actually I have an issue with the ubi part command.
Situation:
MPC8377 based board with 64MiB Nor- (u-boot etc.) and 1GiB Nand-Flash
(ubi volume).
MTD devices look like this :
= mtdparts
device nor0 NOR, # parts = 2
#: namesizeoffset mask_flags
On Tue, Mar 1, 2011 at 9:54 PM, Alexander Holler hol...@ahsoftware.de wrote:
Hello Jason,
On 02.03.2011 00:37, Jason Kridner wrote:
From: Alexander Hollerhol...@ahsoftware.de
Using the new env import command it is possible to use plain text files
instead
of script-images. Plain text files
Hello,
Am 02.03.2011 16:44, schrieb Jason Kridner:
On Tue, Mar 1, 2011 at 9:54 PM, Alexander Hollerhol...@ahsoftware.de wrote:
Hello Jason,
On 02.03.2011 00:37, Jason Kridner wrote:
From: Alexander Hollerhol...@ahsoftware.de
Using the new env import command it is possible to use plain
Both boards were missing the CONFIG_SYS_SDRAM_BASE and
CONFIG_SYS_INIT_SP_ADDR defines.
Signed-off-by: Ithamar R. Adema ithamar.ad...@team-embedded.nl
---
include/configs/SMN42.h |3 +++
include/configs/lpc2292sodimm.h |3 +++
2 files changed, 6 insertions(+), 0 deletions(-)
The defines in arch/m68k/include/coldfire/flexbus.h are not compatible with the
5235 processor. The registers in struct fbcs are different sizes from those in
the 5235. Also, the defines are a little different.
This is what I have so far. Comments?
---
The write recovery time of both registers should match. Since mode register
doesn't support cycles of 9,11,13,15, we should use next higher number for
both registers.
Signed-off-by: York Sun york...@freescale.com
---
arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 28
1
This patch revised clk_adjust and wrlvl_start timings for corenet_ds, based
on testing on Virtium VL33B5163F-K9S and Kingston KVR1333D3Q8R9S/4G.
Signed-off-by: York Sun york...@freescale.com
---
board/freescale/corenet_ds/ddr.c |8
1 files changed, 4 insertions(+), 4 deletions(-)
On 03/02/2011 04:19 PM, Fabio Estevam wrote:
I was working on adding MX25PDK support and I think that that the
UART reference should be explicit, as different boards can boot from
different UART ports.
I have applied your patch to u-boot-imx, next branch. Maybe it is easier
to you to use it
York Sun wrote:
+ switch (wrrec_mclk) { /* DDR_SDRAM_MODE doesn't support 9,11,13,15 */
+ case 9:
+ wrrec_mclk = 10;
+ break;
+ case 11:
+ wrrec_mclk = 12;
+ break;
+ case 13:
+ wrrec_mclk = 14;
+
On Wed, 2011-03-02 at 13:31 -0600, Timur Tabi wrote:
York Sun wrote:
+ switch (wrrec_mclk) { /* DDR_SDRAM_MODE doesn't support 9,11,13,15 */
+ case 9:
+ wrrec_mclk = 10;
+ break;
+ case 11:
+ wrrec_mclk = 12;
+ break;
+ case 13:
+
This patch revised clk_adjust and wrlvl_start timings for corenet_ds, based
on testing on Virtium VL33B5163F-K9S and Kingston KVR1333D3Q8R9S/4G.
Signed-off-by: York Sun york...@freescale.com
---
board/freescale/corenet_ds/ddr.c |8
1 files changed, 4 insertions(+), 4 deletions(-)
York Sun wrote:
if (wrrec_mclk 1)
wrrec_mclk++;
Only 9, 11, 13, 15 need to round up.
What are all the possible values for wrrec_mclk?
--
Timur Tabi
Linux kernel developer at Freescale
___
U-Boot mailing list
U-Boot@lists.denx.de
The write recovery time of both registers should match. Since mode register
doesn't support cycles of 9,11,13,15, we should use next higher number for
both registers.
Signed-off-by: York Sun york...@freescale.com
---
arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 28
1
On Wed, 2011-03-02 at 13:46 -0600, Timur Tabi wrote:
York Sun wrote:
if (wrrec_mclk 1)
wrrec_mclk++;
Only 9, 11, 13, 15 need to round up.
What are all the possible values for wrrec_mclk?
There is no limitation on register timing_cfg_1[wrrec_mclk]. It can be
any value. The
Hello,
just a last word. I don't have to decide which patch is used and I don't
have any problem if v2 is used. I'm able to modify bootcmd like I wish
and can live with any version.
I've justed wanted to make clear why I haven't used a simpler approach.
Anyway, if v2 will be used, please just
York Sun wrote:
On Wed, 2011-03-02 at 13:46 -0600, Timur Tabi wrote:
York Sun wrote:
if (wrrec_mclk 1)
wrrec_mclk++;
Only 9, 11, 13, 15 need to round up.
What are all the possible values for wrrec_mclk?
There is no limitation on register timing_cfg_1[wrrec_mclk]. It can be
any
From: Alexander Holler hol...@ahsoftware.de
Using the new env import command it is possible to use plain text files instead
of script-images. Plain text files are much easier to handle.
E.g. If your boot.scr contains the following:
---
setenv dvimode
Hi Po-Yu Chuang,
Le 02/03/2011 06:53, Po-Yu Chuang a écrit :
From: Po-Yu Chuangratb...@faraday-tech.com
This line appears in the body of your mail; it should not. Did you use
git send-email to post these patches?
This is done by the following command:
$ for f in `find * -type f`; do sed -i
Hi Albert,
On Wed, Mar 2, 2011 at 2:59 PM, Albert ARIBAUD albert.arib...@free.fr wrote:
Hi Po-Yu Chuang,
Le 02/03/2011 06:53, Po-Yu Chuang a écrit :
From: Po-Yu Chuangratb...@faraday-tech.com
This line appears in the body of your mail; it should not. Did you use git
send-email to post
This patch revised clk_adjust and wrlvl_start timings for corenet_ds, based
on testing on Virtium VL33B5163F-K9S and Kingston KVR1333D3Q8R9S/4G.
Signed-off-by: York Sun york...@freescale.com
---
board/freescale/corenet_ds/ddr.c |8
1 files changed, 4 insertions(+), 4 deletions(-)
The write recovery time of both registers should match. Since mode register
doesn't support cycles of 9,11,13,15, we should use next higher number for
both registers.
Signed-off-by: York Sun york...@freescale.com
---
arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 20 ++--
1 files
The write recovery time of both registers should match. Since mode register
doesn't support cycles of 9,11,13,15, we should use next higher number for
both registers.
Signed-off-by: York Sun york...@freescale.com
---
arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 20 ++--
1 files
This patch revised clk_adjust and wrlvl_start timings for corenet_ds, based
on testing on Virtium VL33B5163F-K9S and Kingston KVR1333D3Q8R9S/4G.
Signed-off-by: York Sun york...@freescale.com
---
board/freescale/corenet_ds/ddr.c |8
1 files changed, 4 insertions(+), 4 deletions(-)
Hello Jason,
Am 02.03.2011 21:26, schrieb Jason Kridner:
For backwards compatibility the use of boot.scr is still supported.
Sorry, but I think that line in the description should get removed too.
Regards,
Alexander
___
U-Boot mailing list
On Wed, Mar 2, 2011 at 5:41 PM, Alexander Holler hol...@ahsoftware.de wrote:
Hello Jason,
Am 02.03.2011 21:26, schrieb Jason Kridner:
For backwards compatibility the use of boot.scr is still supported.
Sorry, but I think that line in the description should get removed too.
So, just a
Hi,
I'm trying to enable watchdog in u-boot on P1011 based platform.
I've noticed that all 85XX platforms have CONFIG_WATCHDOG
disabled. There's a definition of reset_85xx_watchdog() in
cpu/mpc85xx/cpu.c but no code that actually enables the watchdog.
What should be done to make this feature
- Timeout counter value is set as DTOCV bits in SYSCTL register
For counter value set as timeout,
Timeout period = (2^(timeout + 13)) SD Clock cycles
- As per 4.6.2.2 section of SD Card specification v2.00, host should
cofigure timeout period value to minimum 0.25 sec.
- Number of SD Clock
I don't think anyone here has ever turned on watchdog support on an 85xx board.
I think it works on 86xx boards, though.
Aggrwal Poonam-B10812 wrote:
Hello Felix
We have not used watchdog feature in u-boot as such.
Timur, do you have any idea about this? Can you give some pointers here.
Hello Felix
We have not used watchdog feature in u-boot as such.
Timur, do you have any idea about this? Can you give some pointers here.
I will also try to explore it more.
Regards
Poonam
-Original Message-
From: Felix Radensky [mailto:fe...@embedded-sol.com]
Sent: Thursday,
Hi All,
Just clarification, felix is asking for WatchDog support on u-boot not on Linux.
If he is asking on Linux then it's there and we have tested it.
Regards,
Dipen
-Original Message-
From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de] On
Behalf Of Tabi
From: Matt Waddel matt.wad...@linaro.org
Add support for the ARM PrimeCell MultiMedia Interface - PL180.
Ported from original device driver written by ST-Ericsson.
Signed-off-by: Matt Waddel matt.wad...@linaro.org
---
drivers/mmc/Makefile |1 +
drivers/mmc/arm_pl180_mmci.c | 452
From: Matt Waddel matt.wad...@linaro.org
Added the board specific definitions to use the MMCI device.
Signed-off-by: Matt Waddel matt.wad...@linaro.org
---
board/armltd/vexpress/ca9x4_ct_vxp.c |9 +
include/configs/ca9x4_ct_vxp.h |4
2 files changed, 13 insertions(+),
From: Matt Waddel matt.wad...@linaro.org
These patches add support for the ARM PrimeCell PL180 MultiMedia Interface.
The Versatile Express was the test platform for these changes.
---
Change log:
v2 - Rename patch items to a more descriptive name (ie. mmci - arm_mmci)
Fixed conflicting
Le 02/03/2011 10:02, Po-Yu Chuang a écrit :
From: Po-Yu Chuangratb...@faraday-tech.com
Monitor protection region in FLASH did not cover .rel.dyn
and .dynsym sections, because it uses __bss_start to compute
monitor_flash_len. Use _end instead.
Add _end to linker scripts for end of u-boot
Le 02/03/2011 10:02, Po-Yu Chuang a écrit :
From: Po-Yu Chuangratb...@faraday-tech.com
Monitor protection region in FLASH did not cover .rel.dyn
and .dynsym sections, because it uses __bss_start to compute
monitor_flash_len. Use _end instead.
Add _end to linker scripts for end of u-boot
Hi Matthias,
Le 26/01/2011 11:45, Matthias Weisser a écrit :
Using optimized versions of memset and memcpy from linux brings a quite
noticeable speed (x2 or better) improvement for these two functions.
Here are some numbers for test done with jadecpu
| HEAD(1)|
Le 18/02/2011 06:34, Po-Yu Chuang a écrit :
From: Po-Yu Chuangratb...@faraday-tech.com
Also add API declarations.
Signed-off-by: Po-Yu Chuangratb...@faraday-tech.com
---
Applied to u-boot-arm/next, thanks!
Wolfgang: I have put the patches in 'Awaiting upstream' state as none of
the states
Le 18/02/2011 06:35, Po-Yu Chuang a écrit :
From: Po-Yu Chuangratb...@faraday-tech.com
ftpmu010 related code has been moved to drivers/power/.
Signed-off-by: Po-Yu Chuangratb...@faraday-tech.com
---
v2:
remove unused local variable oscc
include/ftpmu010.h - include/faraday/ftpmu010.h
Hi Dipen,
On 03/03/2011 06:27 AM, Dudhat Dipen-B09055 wrote:
Hi All,
Just clarification, felix is asking for WatchDog support on u-boot not on
Linux.
If he is asking on Linux then it's there and we have tested it.
Correct. It works fine in linux. I've even tried to port linux code that
Hi Felix,
Le 03/03/2011 08:41, Felix Radensky a écrit :
Just clarification, felix is asking for WatchDog support on u-boot not on
Linux.
If he is asking on Linux then it's there and we have tested it.
Correct. It works fine in linux. I've even tried to port linux code that
enables
51 matches
Mail list logo