Acked
On Thu, Nov 17, 2011 at 07:10:46PM +0100, Marek Vasut wrote:
This link script seems old and incompatible with relocation and its
own sa1000 start.S file. It isn't used because the CPU's link script
was picked up in preference to this.
Signed-off-by: Simon Glass s...@chromium.org
This patch fixes the build breakage for the davinci_sonata board.
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Sergey Kubushyn k...@koi8.net
Cc: Sandeep Paulraj s-paul...@ti.com
---
board/davinci/sonata/sonata.c|3 ---
include/configs/davinci_sonata.h |2 ++
2
This patch fixes the build breakage for the davinci_schmoogie board.
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Sergey Kubushyn k...@koi8.net
Cc: Sandeep Paulraj s-paul...@ti.com
---
board/davinci/schmoogie/schmoogie.c |3 ---
include/configs/davinci_schmoogie.h |3
This patch replaces the HAWKBOARD_KICK{0,1}_UNLOCK defines by
DV_SYSCFG_KICK{0,1}_UNLOCK.
The kick register values are not hawkboard specific but may be used
for all davinci boards. In commit f3c149d6c6e5ba8dd72baa86fe527837e4fb0e9a
new defines for these values wer introduced.
Signed-off-by:
MACH_TYPE_FARADAY was removed from mach-types.h.
Add it to the board config file.
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
board/faraday/a320evb/a320evb.c |1 -
include/configs/a320evb.h |3 +++
2 files changed, 3 insertions(+), 1 deletions(-)
diff --git
MACH_TYPE_HHP_CRADLE was removed from mach-types.h.
Add it to the board config file.
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
board/cradle/cradle.c|3 ---
include/configs/cradle.h |3 +++
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/board/cradle/cradle.c
MACH_TYPE_SBC35_A9G20 was removed from mach-types.h.
Add it to the board config file.
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
board/calao/sbc35_a9g20/sbc35_a9g20.c |1 -
include/configs/sbc35_a9g20.h |3 +++
2 files changed, 3 insertions(+), 1 deletions(-)
diff --git
MACH_TYPE_PLEB2 was removed from mach-types.h.
Add it to the board config file.
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
board/pleb2/pleb2.c |3 ---
include/configs/pleb2.h |3 +++
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/board/pleb2/pleb2.c
MACH_TYPE_XM250 was removed from mach-types.h.
Add it to the board config file.
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
board/xm250/xm250.c |3 ---
include/configs/xm250.h |3 +++
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/board/xm250/xm250.c
MACH_TYPE_PXA_CERF was removed from mach-types.h.
Add it to the board config file.
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
board/cerf250/cerf250.c |3 ---
include/configs/cerf250.h |3 +++
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git
Fix:
flash.c: In function 'flash_erase':
flash.c:252:6: warning: variable 'flag' set but not used
[-Wunused-but-set-variable]
flash.c: In function 'write_data':
flash.c:421:6: warning: variable 'flag' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
Build breakage still pollutes the MAKEALL log. Fix build
problems for some ARM based boards. The patches can be
pulled from
git://git.denx.de/u-boot-video.git arm-fixes
I also fixed davinci_schmoogie and davinci_sonata, but
there are already patches for these on the patchwork [1],
[2], so I do
As a result of the commit 6833260 the uart16550 driver
is broken for Microblaze big endian systems, because of
the missing 3 byte offset. Other than as described, the
U-Boot BSP does not treat properly the 3 byte offset.
However, with the new 32 bit access to ns16550 registers
we can enable
MACH_TYPE_TNY_A9G20 and MACH_TYPE_TNY_A9260 were removed
from mach-types.h. Add them to the board config file.
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
board/calao/tny_a9260/tny_a9260.c |5 -
include/configs/tny_a9260.h |4
2 files changed, 4 insertions(+), 5
Fix:
flash.c: In function 'flash_erase':
flash.c:223:6: warning: variable 'flag' set but not used
[-Wunused-but-set-variable]
flash.c: In function 'write_data':
flash.c:392:6: warning: variable 'flag' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
Fix:
davinci_i2c.c: In function 'flush_rx':
davinci_i2c.c:81:6: warning: variable 'dummy' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
Acked-by: Heiko Schocher h...@denx.de
---
v2:
- drop void cast since REG() is not a function call but
expands
On Wed, 16 Nov 2011 08:42:07 -0700
Tom Rini tom.r...@gmail.com wrote:
...
--- a/drivers/i2c/davinci_i2c.c
+++ b/drivers/i2c/davinci_i2c.c
@@ -78,13 +78,11 @@ static int poll_i2c_irq(int mask)
void flush_rx(void)
{
- int dummy;
-
while (1) {
if
Hi Mike,
Thank you for the review.
I am attaching the updated patch bellow.
Few comments in a reply to your remarks/questions.
---
+void board_reset(void)
+{
+ /* workaround for weak pull ups on ssel
If you look at current board/freescale/p1_p2_rdb/law.c it doesn't have PCI
LAWs anymore. I think for your example you just need an empty data
structure:
struct law_entry law_table[] = {
};
this should hopefully make num_law_entries = 0;
+};
+
+int num_law_entries =
On Nov 8, 2011, at 5:40 PM, Timur Tabi wrote:
Several macros are used to identify and locate the microcode binary image
that U-boot needs to upload to the QE or Fman. Both the QE and the Fman
use the QE Firmware binary format to package their respective microcode data,
which is why the same
Kumar Gala wrote:
#ifdef CONFIG_QE
/* QE microcode/firmware address */
-#define CONFIG_SYS_QE_FW_ADDR0xefec
-#define CONFIG_SYS_QE_FW_LENGTH 0x1
+#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
+#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xefec
+#define
On Sat, Nov 19, 2011 at 3:59 AM, Anatolij Gustschin ag...@denx.de wrote:
MACH_TYPE_FARADAY was removed from mach-types.h.
Add it to the board config file.
Signed-off-by: Anatolij Gustschin ag...@denx.de
I built this and it fixes the failure. I did not test on hardware.
Acked-by: Simon Glass
On Sat, Nov 19, 2011 at 3:59 AM, Anatolij Gustschin ag...@denx.de wrote:
MACH_TYPE_PXA_CERF was removed from mach-types.h.
Add it to the board config file.
Signed-off-by: Anatolij Gustschin ag...@denx.de
I built this and it fixes the failure. I did not test on hardware.
Acked-by: Simon Glass
On Sat, Nov 19, 2011 at 3:59 AM, Anatolij Gustschin ag...@denx.de wrote:
MACH_TYPE_HHP_CRADLE was removed from mach-types.h.
Add it to the board config file.
Signed-off-by: Anatolij Gustschin ag...@denx.de
I built this and it fixes the failure. I did not test on hardware.
Acked-by: Simon
On Sat, Nov 19, 2011 at 3:59 AM, Anatolij Gustschin ag...@denx.de wrote:
MACH_TYPE_PLEB2 was removed from mach-types.h.
Add it to the board config file.
Signed-off-by: Anatolij Gustschin ag...@denx.de
I built this and it fixes the failure. I did not test on hardware.
Acked-by: Simon Glass
On Sat, Nov 19, 2011 at 3:59 AM, Anatolij Gustschin ag...@denx.de wrote:
MACH_TYPE_SBC35_A9G20 was removed from mach-types.h.
Add it to the board config file.
Signed-off-by: Anatolij Gustschin ag...@denx.de
I built this and it fixes the failure. I did not test on hardware.
Acked-by: Simon
On Sat, Nov 19, 2011 at 3:59 AM, Anatolij Gustschin ag...@denx.de wrote:
MACH_TYPE_TNY_A9G20 and MACH_TYPE_TNY_A9260 were removed
from mach-types.h. Add them to the board config file.
Signed-off-by: Anatolij Gustschin ag...@denx.de
I built this and it fixes the failure. I did not test on
On Sat, Nov 19, 2011 at 3:59 AM, Anatolij Gustschin ag...@denx.de wrote:
MACH_TYPE_XM250 was removed from mach-types.h.
Add it to the board config file.
Signed-off-by: Anatolij Gustschin ag...@denx.de
I built this and it fixes the failure. I did not test on hardware.
Acked-by: Simon Glass
On Sat, Nov 19, 2011 at 3:59 AM, Anatolij Gustschin ag...@denx.de wrote:
Fix:
flash.c: In function 'flash_erase':
flash.c:223:6: warning: variable 'flag' set but not used
[-Wunused-but-set-variable]
flash.c: In function 'write_data':
flash.c:392:6: warning: variable 'flag' set but not used
On Sat, Nov 19, 2011 at 3:59 AM, Anatolij Gustschin ag...@denx.de wrote:
Fix:
flash.c: In function 'flash_erase':
flash.c:252:6: warning: variable 'flag' set but not used
[-Wunused-but-set-variable]
flash.c: In function 'write_data':
flash.c:421:6: warning: variable 'flag' set but not used
This fixes the following warning with gcc 4.4.3.
aisimage.c: In function 'aisimage_generate':
aisimage.c:365: warning: 'tsize' may be used uninitialized in this function
Signed-off-by: Simon Glass s...@chromium.org
---
tools/aisimage.c |6 +++---
1 files changed, 3 insertions(+), 3
Fix:
mvgbe.c: In function 'mvgbe_send':
mvgbe.c:555:2: warning: dereferencing type-punned pointer will
break strict-aliasing rules [-Wstrict-aliasing]
mvgbe.c: In function 'mvgbe_recv':
mvgbe.c:640:2: warning: dereferencing type-punned pointer will
break strict-aliasing rules [-Wstrict-aliasing]
Acked
Ok, so how shall we handle SA1110 ? I can pick it up, then send pullrq to
albert
?
M
On Thu, Nov 17, 2011 at 07:10:46PM +0100, Marek Vasut wrote:
This link script seems old and incompatible with relocation and its
own sa1000 start.S file. It isn't used because the CPU's link
On 01/-10/-28163 12:59 PM, Macpaul Lin wrote:
This reverts commit 02f3029f1810b99869254d0cf0a71946a008a728.
This patch add 3 times retry to CMD8 because the Marvell mmc controller
doesn't obey the power ramp up process in the SD specification 6.4.1.
(Please refer to figure 6.1 and 6.2 in the
On Saturday 19 November 2011 12:36:00 Stephen Warren wrote:
On 01/-10/-28163 12:59 PM, Macpaul Lin wrote:
This reverts commit 02f3029f1810b99869254d0cf0a71946a008a728.
This patch add 3 times retry to CMD8 because the Marvell mmc controller
doesn't obey the power ramp up process in the SD
Fix:
dnet.c: In function 'dnet_send':
dnet.c:136:9: warning: variable 'len' set but not used
[-Wunused-but-set-variable]
dnet.c: In function 'dnet_set_hwaddr':
dnet.c:209:2: warning: dereferencing type-punned pointer will
break strict-aliasing rules [-Wstrict-aliasing]
dnet.c:209:2: warning:
Fix:
ehci-mxc.c: In function 'ehci_hcd_init':
ehci-mxc.c:113:6: warning: variable 'tmp' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
drivers/usb/host/ehci-mxc.c |3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
diff --git
Fix:
flash.c: In function 'flash_erase':
flash.c:223:6: warning: variable 'flag' set but not used
[-Wunused-but-set-variable]
flash.c: In function 'write_data':
flash.c:392:6: warning: variable 'flag' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
On Saturday 19 November 2011 10:18:16 Dimitar Penev wrote:
+void board_reset(void)
+{
+ /* workaround for weak pull ups on ssel */
+ if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
+ bfin_reset_boot_spi_cs(GPIO_PF10);
+}
do you actually have this problem in the hardware ? or is
Fix:
bootp.c: In function 'BootpCopyNetParams':
bootp.c:108:11: warning: unused variable 'tmp_ip' [-Wunused-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
net/bootp.c |3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/net/bootp.c b/net/bootp.c
index
On Sat, Nov 19, 2011 at 11:27 AM, Marek Vasut marek.va...@gmail.com wrote:
Acked
Ok, so how shall we handle SA1110 ? I can pick it up, then send pullrq to
albert
?
SGTM - Simon
M
On Thu, Nov 17, 2011 at 07:10:46PM +0100, Marek Vasut wrote:
This link script seems old and incompatible
The bf537-stamp shouldn't need this SPI flash workaround. It was added
by accident a long time ago through a convoluted series of steps which
originated from a customer board (not the bf537-stamp). So drop it to
keep people from incorrectly adding it to their own boards.
Signed-off-by: Mike
Tegra appears to boot with function UARTA pre-selected on mux
group SDB. If two mux groups are both set to the same function,
it's unclear which group's pins drive the RX signals into the
HW module. For UARTA, SDB certainly overrides group IRTX in
practice. To solve this, configure some
This patch series adds support for the Toshiba AC100 Tegra netbook.
I'm posting it as an RFC because:
a) The AC100 is designed by Compal and marketed by Toshiba. Should we put
the files into board/nvidia (since it uses an NVIDIA SoC), or create a
board/toshiba or board/compal directory to
The Toshiba AC100 (code-name Paz00m a/k/a Dynabook AZ) is an netbook derived
from the NVIDIA Tegra Harmony reference board. It ships with Ubuntu, but is
often repurposed to run Linux. This patch adds just enough support to get a
U-Boot serial console, and the ability access built-in eMMC and the
I forgot to edit it when I cut/paste Tom Warren's MAINTAINERS entry.
Signed-off-by: Stephen Warren swar...@nvidia.com
---
MAINTAINERS |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 567dc61..c532c29 100644
--- a/MAINTAINERS
+++
2011/11/17 Marek Vasut marek.va...@gmail.com
Jana, you have efikamx and I can get you HDMI cable. Can you recheck
tomorrow ?
M
Ok, I can.
So any updates?
___
U-Boot mailing list
U-Boot@lists.denx.de
Hi Praffula,
On Mon, 31 Oct 2011 16:49:37 +0530
Ajay Bhargav ajay.bhar...@einfochips.com wrote:
This patch fix compilation warnings for Armada100 FEC driver
Ref:
warning: dereferencing type-punned pointer will break
strict-aliasing rules
Signed-off-by: Ajay Bhargav
Fix:
musb_hcd.c: In function 'submit_control_msg':
musb_hcd.c:851:6: warning: variable 'csr' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
drivers/usb/musb/musb_hcd.c |3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
diff --git
Fix:
samsung.c: In function 's3c_onenand_check_lock_status':
samsung.c:486:6: warning: variable 'tmp' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
drivers/mtd/onenand/samsung.c |3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
diff
Fix:
lan91c96.c: In function 'dump_memory_info':
lan91c96.c:157:7: warning: variable 'mem_info' set but not used
[-Wunused-but-set-variable]
lan91c96.c: In function 'smc_send_packet':
lan91c96.c:320:16: warning: variable 'ioaddr' set but not used
[-Wunused-but-set-variable]
Signed-off-by:
Fix:
flash.c: In function 'flash_erase':
flash.c:223:6: warning: variable 'flag' set but not used
[-Wunused-but-set-variable]
flash.c: In function 'write_data':
flash.c:392:6: warning: variable 'flag' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
Fix:
cs8900.c: In function 'get_reg_init_bus':
cs8900.c:69:14: warning: variable 'c' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
drivers/net/cs8900.c | 11 +--
1 files changed, 5 insertions(+), 6 deletions(-)
diff --git
These patches can also be pulled from
git://git.denx.de/u-boot-video.git gcc46-warning-fixes
Anatolij Gustschin (10):
drivers/usb/musb/musb_hcd.c: Fix GCC 4.6 warning
drivers/mtd/onenand/samsung.c: Fix GCC 4.6 warning
board/ronetix/pm9263/pm9263.c: Fix GCC 4.6 warning
Fix:
syncflash.c: In function 'SF_SR':
syncflash.c:60:10: warning: variable 'tmp1' set but not used
[-Wunused-but-set-variable]
syncflash.c: In function 'SF_PrechargeAll':
syncflash.c:96:6: warning: variable 'tmp' set but not used
[-Wunused-but-set-variable]
mx1ads.c: In function
Fix:
mx1ads.c: In function 'board_early_init_f':
mx1ads.c:83:24: warning: variable 'tmp' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
board/mx1ads/mx1ads.c |7 +++
1 files changed, 3 insertions(+), 4 deletions(-)
diff --git
Fix:
cmd_bootm.c: In function 'bootm_load_os':
cmd_bootm.c:315:7: warning: unused variable 'unc_len'
[-Wunused-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
common/cmd_bootm.c |3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/common/cmd_bootm.c
Fix:
pm9263.c: In function 'pm9263_lcd_hw_psram_init':
pm9263.c:167:20: warning: variable 'x' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
board/ronetix/pm9263/pm9263.c | 13 ++---
1 files changed, 6 insertions(+), 7 deletions(-)
Fix:
cpuinfo.c: In function 'print_cpuinfo':
cpuinfo.c:155:6: warning: variable 'system_serial_low' set but not used
[-Wunused-but-set-variable]
cpuinfo.c:154:6: warning: variable 'system_serial_high' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
Separate callback for probing OneNAND memory chip.
If no special function is defined, default implementation will be used.
This approach gives more flexibility for OneNAND device probing.
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
Signed-off-by: Kyungmin Park
On Sat, Nov 19, 2011 at 3:59 AM, Anatolij Gustschin ag...@denx.de wrote:
MACH_TYPE_PXA_CERF was removed from mach-types.h.
Add it to the board config file.
Signed-off-by: Anatolij Gustschin ag...@denx.de
I built this and it fixes the failure. I did not test on hardware.
Acked-by:
On Sat, Nov 19, 2011 at 3:59 AM, Anatolij Gustschin ag...@denx.de wrote:
MACH_TYPE_PXA_CERF was removed from mach-types.h.
Add it to the board config file.
Signed-off-by: Anatolij Gustschin ag...@denx.de
I built this and it fixes the failure. I did not test on hardware.
The ARM link scripts are very similar but each CPU has its own. This
series adds support for a default link script across an architecture
in arch/arch/cpu/u-boot.lds.
It is then possible to remove most of the ARM link scripts. This will
make it easier to maintain these.
Please CC Albert
The Makefile for a CPU is in arch/($ARCH)/cpu/$(CPU). We want to support
having an .lds file in arch/$(ARCH)/cpu without requiring an additional
Makefile there. This change makes it clear that we expect a Makefile in
the same directory as the link script except in this case.
Signed-off-by:
Signed-off-by: Marek Vasut marek.va...@gmail.com
Cc: Simon Glass s...@chromium.org
Cc: Anatolij Gustschin ag...@denx.de
Cc: Prakash Kumar prak...@embedx.com
---
MAINTAINERS |4 -
board/cerf250/Makefile| 43 -
board/cerf250/cerf250.c | 85 -
On Sat, Nov 19, 2011 at 12:59:05AM -0500, Mike Frysinger wrote:
On Saturday 19 November 2011 00:21:32 Stefan Kristiansson wrote:
--- /dev/null
+++ b/arch/openrisc/cpu/cache.c
+int checkicache(void)
+int checkdcache(void)
these should be static
--- /dev/null
+++
Hi Marek,
On Sat, Nov 19, 2011 at 8:04 PM, Marek Vasut marek.va...@gmail.com wrote:
The ARM link scripts are very similar but each CPU has its own. This
series adds support for a default link script across an architecture
in arch/arch/cpu/u-boot.lds.
It is then possible to remove most of the
Hi Marek,
On Sat, Nov 19, 2011 at 8:07 PM, Marek Vasut marek.va...@gmail.com wrote:
The Makefile for a CPU is in arch/($ARCH)/cpu/$(CPU). We want to support
having an .lds file in arch/$(ARCH)/cpu without requiring an additional
Makefile there. This change makes it clear that we expect a
On Sat, Nov 19, 2011 at 8:20 PM, Marek Vasut marek.va...@gmail.com wrote:
Signed-off-by: Marek Vasut marek.va...@gmail.com
Cc: Simon Glass s...@chromium.org
Cc: Anatolij Gustschin ag...@denx.de
Cc: Prakash Kumar prak...@embedx.com
+jtassit...@embedx.com who may wish to update the maintainer?
Hi Marek,
On Sat, Nov 19, 2011 at 8:04 PM, Marek Vasut marek.va...@gmail.com wrote:
The ARM link scripts are very similar but each CPU has its own. This
series adds support for a default link script across an architecture
in arch/arch/cpu/u-boot.lds.
It is then possible to remove
Hi Mike,
On Fri, Nov 18, 2011 at 11:53 AM, Mike Frysinger vap...@gentoo.org wrote:
On Friday 18 November 2011 12:20:02 Stefano Babic wrote:
On 11/05/2011 03:25 PM, Simon Glass wrote:
This corects the warning below, obtained with my gcc 4.6 compiler.
arch/arm/cpu/armv7/mx5/libmx5.o: In
On Saturday 19 November 2011 23:07:08 Marek Vasut wrote:
LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot.lds
endif
ifeq ($(wildcard $(LDSCRIPT)),)
+ LDSCRIPT := $(TOPDIR)/arch/$(ARCH)/cpu/u-boot.lds
+ # We don't expect a Makefile here
+
no changelog as to why it's being dropped ?
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On Saturday 19 November 2011 23:27:34 Stefan Kristiansson wrote:
On Sat, Nov 19, 2011 at 12:59:05AM -0500, Mike Frysinger wrote:
On Saturday 19 November 2011 00:21:32 Stefan Kristiansson wrote:
--- /dev/null
+++ b/arch/openrisc/cpu/cache.c
+int checkicache(void)
+int
On Sunday 20 November 2011 00:08:05 Simon Glass wrote:
On Fri, Nov 18, 2011 at 11:53 AM, Mike Frysinger wrote:
On Friday 18 November 2011 12:20:02 Stefano Babic wrote:
On 11/05/2011 03:25 PM, Simon Glass wrote:
This corects the warning below, obtained with my gcc 4.6 compiler.
Hi Mike,
On Sat, Nov 19, 2011 at 9:31 PM, Mike Frysinger vap...@gentoo.org wrote:
On Sunday 20 November 2011 00:08:05 Simon Glass wrote:
On Fri, Nov 18, 2011 at 11:53 AM, Mike Frysinger wrote:
On Friday 18 November 2011 12:20:02 Stefano Babic wrote:
On 11/05/2011 03:25 PM, Simon Glass
Hi Kumar,
On Tue, Nov 8, 2011 at 5:48 AM, Kumar Gala ga...@kernel.crashing.org wrote:
On Nov 3, 2011, at 11:22 AM, Simon Glass wrote:
Hi Andy,
On Thu, Nov 3, 2011 at 12:28 AM, Andy Fleming aflem...@freescale.com wrote:
The MAKEALL script cleverly runs make with the appropriate options
to
On 11/18/11 12:43, Thomas Weber wrote:
This patch removes the CONFIG_OMAP3430, because it is unused.
Signed-off-by: Thomas Weber we...@corscience.de
When you change board related files,
it is a good practice to CC board maintainers.
Thanks
Acked-by: Igor Grinberg grinb...@compulab.co.il
On 11/18/11 12:44, Thomas Weber wrote:
This patch removes the unused definition of SDRC_R_C_B
from the config files.
Signed-off-by: Thomas Weber we...@corscience.de
Acked-by: Igor Grinberg grinb...@compulab.co.il
---
include/configs/am3517_crane.h |1 -
On 11/18/11 12:44, Thomas Weber wrote:
This patch removes the definition of stack sizes for
irq and fiq if the CONFIG_USE_IRQ is undefined before.
Signed-off-by: Thomas Weber we...@corscience.de
Acked-by: Igor Grinberg grinb...@compulab.co.il
---
include/configs/am3517_crane.h |4
Hi Tom,
On 11/19/11 00:48, Tom Rini wrote:
A number of boards are populated with a PoP chip for both DDR and NAND
memory. Other boards may simply use this as an easy way to identify
board revs. So we provide a function that can be called early to reset
the NAND chip and return the result of
81 matches
Mail list logo