Hello Jeong,
On 12.12.2012 08:54, Jeong Hyeon Kim wrote:
From: Jeong-Hyeon Kimjh...@insignal.co.kr
This patch adds pinmux support for I2C channels
Signed-off-by: Jeong-Hyeon Kimjh...@insignal.co.kr
---
arch/arm/cpu/armv7/exynos/pinmux.c | 51
1 file
Hi Scott,
On 12/11/2012 01:56:25 AM, Lukasz Majewski wrote:
Hi Scott,
On 12/10/2012 09:24:32 AM, Pantelis Antoniou wrote:
+ sprintf(cmd_buf, nand %s %p %llx %llx,
+ op == DFU_OP_READ ? read : write,
+buf, start, count);
+
+
Hello, I have the following question. It is about the adresses
where the U-boot and Linux Kernel are copyed in the SDRAM from NAND.
In my board config file I have:
#define CONFIG_SYS_LOAD_ADDR0x2200/* load address */
Is that the load address of the U-boot?
This patch adds clock support for SATA
Signed-off-by: Vasanth Ananthan vasant...@samsung.com
---
arch/arm/cpu/armv7/exynos/clock.c | 64
arch/arm/include/asm/arch-exynos/clk.h |3 +-
2 files changed, 66 insertions(+), 1 deletion(-)
diff --git
This patch adds the macro definition of SATA controller and PHY controller
base addresses.
Signed-off-by: Vasanth Ananthan vasant...@samsung.com
---
arch/arm/include/asm/arch-exynos/cpu.h|3 +++
arch/arm/include/asm/arch-exynos/periph.h |1 +
2 files changed, 4 insertions(+)
diff
This patch provides support for SATA in Exynos5250
Signed-off-by: Vasanth Ananthan vasant...@samsung.com
---
drivers/block/dwc_ahsata.c | 397 ++--
1 file changed, 387 insertions(+), 10 deletions(-)
diff --git a/drivers/block/dwc_ahsata.c
This patch adds required macros for enabling SATA.
Signed-off-by: Vasanth Ananthan vasant...@samsung.com
---
include/configs/smdk5250.h | 15 ---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
index
imls does not list the images in NAND devices. This patch implements this
support for legacy type images.
Signed-off-by: Vipin Kumar vipin.ku...@st.com
---
Hello Scott,
There has been sometime since you reviewed the first version of this patch.
+ ulong start = get_timer(0);
+
+ do {
+ ret = usb_get_port_status(dev, i + 1, portsts);
+ if (ret 0) {
+ USB_HUB_PRINTF(get_port_status failed\n);
+ break;
+
Stefan, Wolfgang,
Can you please add relevant people if not present already in this mail
Regards
Vipin
On 12/6/2012 12:14 PM, Vipin KUMAR wrote:
Signed-off-by: Vipin Kumarvipin.ku...@st.com
---
drivers/mmc/Makefile | 1 +
drivers/mmc/spear_sdhci.c | 44
Ping. Can I get a few Reviewed-by's :)
On 12/6/2012 1:35 PM, Stefan Roese wrote:
(Added Mike to Cc)
On 12/06/2012 07:56 AM, Vipin Kumar wrote:
From: Armando Viscontiarmando.visco...@st.com
This patch adds the support for the ARM PL022 SPI controller for the standard
variant (0x00041022),
ping
On 12/6/2012 12:40 PM, Vipin KUMAR wrote:
Do not select MIIPORT for RGMII interface
Signed-off-by: Vipin Kumarvipin.ku...@st.com
---
drivers/net/designware.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/designware.c b/drivers/net/designware.c
index
ping
On 12/6/2012 2:52 PM, Vipin KUMAR wrote:
Certain ARMV7 cpus eg. CortexA9 contains a local and a global timer within the
CPU core itself. This patch adds generic support for local timer.
Signed-off-by: Vipin Kumarvipin.ku...@st.com
---
arch/arm/cpu/armv7/Makefile | 11 ++-
On 12/06/2012 07:44 AM, Vipin Kumar wrote:
Signed-off-by: Vipin Kumar vipin.ku...@st.com
Looks good, so:
Acked-by: Stefan Roese s...@denx.de
Thanks,
Stefan
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On 12/06/2012 08:10 AM, Vipin Kumar wrote:
Do not select MIIPORT for RGMII interface
Signed-off-by: Vipin Kumar vipin.ku...@st.com
Acked-by: Stefan Roese s...@denx.de
Thanks,
Stefan
___
U-Boot mailing list
U-Boot@lists.denx.de
I didn't test..but it looks fine.
Acked-by: Jaehoon Chung jh80.ch...@samsung.com
On 12/06/2012 03:44 PM, Vipin Kumar wrote:
Signed-off-by: Vipin Kumar vipin.ku...@st.com
---
drivers/mmc/Makefile | 1 +
drivers/mmc/spear_sdhci.c | 44
2
On 12/06/2012 07:56 AM, Vipin Kumar wrote:
From: Armando Visconti armando.visco...@st.com
This patch adds the support for the ARM PL022 SPI controller for the standard
variant (0x00041022), which has a 16bit wide and 8 locations deep TX/RX FIFO.
Signed-off-by: Armando Visconti
On 12/12/2012 3:48 PM, Stefan Roese wrote:
On 12/06/2012 07:56 AM, Vipin Kumar wrote:
From: Armando Viscontiarmando.visco...@st.com
This patch adds the support for the ARM PL022 SPI controller for the standard
variant (0x00041022), which has a 16bit wide and 8 locations deep TX/RX FIFO.
ping. one more :)
On 12/6/2012 12:40 PM, Vipin KUMAR wrote:
From: Shiraz Hashimshiraz.has...@st.com
SPEAr310 and SPEAr320 Ethernet interfaces share same MDIO lines to control their
respective phys. Currently their is a fixed configuration in which only a
particular MAC can use the MDIO lines.
On 12/06/2012 08:10 AM, Vipin Kumar wrote:
From: Shiraz Hashim shiraz.has...@st.com
SPEAr310 and SPEAr320 Ethernet interfaces share same MDIO lines to control
their
respective phys. Currently their is a fixed configuration in which only a
particular MAC can use the MDIO lines.
there is
+
+/* SSP registers mapping */
+#define SSP_CR00x000
+#define SSP_CR10x004
+#define SSP_DR 0x008
+#define SSP_SR 0x00C
+#define SSP_CPSR 0x010
+#define SSP_IMSC 0x014
+#define SSP_RIS0x018
+#define SSP_MIS
On 12/12/2012 4:37 PM, Stefan Roese wrote:
On 12/06/2012 08:10 AM, Vipin Kumar wrote:
From: Shiraz Hashimshiraz.has...@st.com
SPEAr310 and SPEAr320 Ethernet interfaces share same MDIO lines to control their
respective phys. Currently their is a fixed configuration in which only a
particular
On 12/12/2012 4:40 PM, Armando VISCONTI wrote:
+
+/* SSP registers mapping */
+#define SSP_CR0 0x000
+#define SSP_CR1 0x004
+#define SSP_DR 0x008
+#define SSP_SR 0x00C
+#define SSP_CPSR 0x010
+#define SSP_IMSC 0x014
+#define SSP_RIS 0x018
+#define SSP_MIS 0x01C
+#define SSP_ICR 0x020
+#define
This patchset adds GPIO numbering feature where pinmux setting
can be done just by seding the pin munber and we do not have to
remember which bank it belongs to.
Rajeshwari Shinde (2):
S5P: GPIO: Add generic pin mumbering API's
EXYNOS5: Add gpio pin numbering feature
This patch adds API's to set config,drive and pull factor in
gpio pin mumbering feature.
Signed-off-by: Rajeshawari Shinde rajeshwar...@samsung.com
---
drivers/gpio/s5p_gpio.c | 18 ++
1 files changed, 18 insertions(+), 0 deletions(-)
diff --git a/drivers/gpio/s5p_gpio.c
On 12/12/2012 12:10 PM, Armando Visconti wrote:
+
+/* SSP registers mapping */
+#define SSP_CR0 0x000
+#define SSP_CR1 0x004
+#define SSP_DR0x008
+#define SSP_SR0x00C
+#define SSP_CPSR 0x010
+#define SSP_IMSC 0x014
+#define SSP_RIS
This patch adds support for gpio pin numbering support on EXYNOS5
pinmux.
Signed-off-by: Leela Krishna Amudala l.kris...@samsung.com
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
---
arch/arm/cpu/armv7/exynos/pinmux.c | 148 +
arch/arm/include/asm/arch-exynos/gpio.h
On 12/12/12 11:54, Vipin Kumar wrote:
+ulong start = get_timer(0);
+
+do {
+ret = usb_get_port_status(dev, i + 1, portsts);
+if (ret 0) {
+USB_HUB_PRINTF(get_port_status failed\n);
+break;
+}
+
+
Dear Heiko,
Thanks for your concern.
I didn't know the patch.
It can be replaced my patch.
Thank you,
JHKIM
2012년 12월 12일 17:16, Heiko Schocher 쓴 글:
Hello Jeong,
On 12.12.2012 08:54, Jeong Hyeon Kim wrote:
From: Jeong-Hyeon Kimjh...@insignal.co.kr
This patch adds pinmux support for I2C
On 12/12/2012 5:10 PM, Igor Grinberg wrote:
On 12/12/12 11:54, Vipin Kumar wrote:
+ulong start = get_timer(0);
+
+do {
+ret = usb_get_port_status(dev, i + 1, portsts);
+if (ret 0) {
+USB_HUB_PRINTF(get_port_status failed\n);
+
From: Armando Visconti armando.visco...@st.com
This patch adds the support for the ARM PL022 SPI controller for the standard
variant (0x00041022), which has a 16bit wide and 8 locations deep TX/RX FIFO.
Signed-off-by: Armando Visconti armando.visco...@st.com
Signed-off-by: Vipin Kumar
On 12/12/2012 01:04 PM, Vipin Kumar wrote:
From: Armando Visconti armando.visco...@st.com
This patch adds the support for the ARM PL022 SPI controller for the standard
variant (0x00041022), which has a 16bit wide and 8 locations deep TX/RX FIFO.
Signed-off-by: Armando Visconti
Hi Joe,
2012/12/12 Joe Hershberger joe.hershber...@ni.com:
serial_initialize() must be called after relocation to adjust the
pointers to putc(), getc(), etc. This is busted ever since the
serial driver-model-ification series.
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
---
mips_io_port_base is exported as 'extern const unsigned long mips_io_port_base;'
in arch/mips/include/asm/io.h. Thus make the variable const too.
Signed-off-by: Daniel Schwierzeck daniel.schwierz...@gmail.com
---
arch/mips/lib/board.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff
From: Joe Hershberger joe.hershber...@ni.com
serial_initialize() must be called after relocation to adjust the
pointers to putc(), getc(), etc. This is busted ever since the
serial driver-model-ification series.
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Signed-off-by: Daniel
Hi Tom,
please pull two bugfixes for MIPS.
The following changes since commit ea40a05422bdc87a7af5dc349e8adce59f982e72:
MIPS: constify address pointer in test_bit() (2012-12-08 21:48:19 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-mips.git master
for you to
On Sat, Dec 08, 2012 at 11:54:13AM -0800, Simon Glass wrote:
Hi Fabio,
On Wed, Dec 5, 2012 at 5:30 PM, Fabio Estevam feste...@gmail.com wrote:
On Wed, Dec 5, 2012 at 11:25 PM, Vadim Bendebury vben...@chromium.org
wrote:
No - md/mw access memory, the new commands access the IO space
On Wed, Dec 05, 2012 at 04:46:27PM -0800, Simon Glass wrote:
This collection of patches to common/ adds the following:
- EDID support for LCD displays
- TPM stress test
- gettime command to find out the time since boot
- Adds coreboot information to the 'version' command
- Fixes LMB on
On Thu, Dec 06, 2012 at 04:33:33PM +0100, Stefano Babic wrote:
On 06/12/2012 16:23, Lukasz Majewski wrote:
Do not compile in FDT related code, when it is not supported.
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
On Tue, Dec 11, 2012 at 07:42:19AM +0100, Heiko Schocher wrote:
Hello Tom,
The following changes since commit fd4d564b3c80b111f18c93adb14233a6a7ddb0e9:
Merge branch 'master' of git://git.denx.de/u-boot-x86 (2012-12-07 08:47:59
-0700)
are available in the git repository at:
On Tue, Dec 11, 2012 at 09:42:21PM -0600, Joe Hershberger wrote:
Hi Thomas,
On Tue, Dec 11, 2012 at 5:47 PM, Langer Thomas (LQDE RD ST PON SW)
thomas.lan...@lantiq.com wrote:
Hello Joe,
These patches for static initialization of the struct eth_ops will break
the drivers on any
Hi,
On Wed, Dec 12, 2012 at 8:33 PM, Rajeshwari Shinde
rajeshwar...@samsung.com wrote:
This patch adds support for gpio pin numbering support on EXYNOS5
pinmux.
We already know that each exynos5 SoCs has different GPIO name and offsets.
So it's good time to use proper soc prefix. e.g.,
Hi Tom,
On Wed, Dec 12, 2012 at 5:13 AM, Tom Rini tr...@ti.com wrote:
On Wed, Dec 05, 2012 at 04:46:27PM -0800, Simon Glass wrote:
This collection of patches to common/ adds the following:
- EDID support for LCD displays
- TPM stress test
- gettime command to find out the time since boot
On Wed, Dec 12, 2012 at 02:00:33PM +0100, Daniel Schwierzeck wrote:
Hi Tom,
please pull two bugfixes for MIPS.
The following changes since commit ea40a05422bdc87a7af5dc349e8adce59f982e72:
MIPS: constify address pointer in test_bit() (2012-12-08 21:48:19 +0100)
are available in
Hi,
On Tue, Dec 11, 2012 at 4:30 AM, Wolfgang Denk w...@denx.de wrote:
Dear Hatim Ali,
In message 1355223289-15685-8-git-send-email-hatim...@samsung.com you wrote:
From: Alim Akhtar alim.akh...@samsung.com
Adds a new u-boot command to read current temprature from tmu driver.
Hi Hatim,
On Tue, Dec 11, 2012 at 4:43 AM, Wolfgang Denk w...@denx.de wrote:
Dear Hatim Ali,
In message 1355223289-15685-4-git-send-email-hatim...@samsung.com you wrote:
From: Akshay Saraswat aksha...@samsung.com
Adding API in power for system shutdown when tripping value is reached
in
Hi,
On Tue, Dec 11, 2012 at 8:01 PM, Ajay Kumar ajaykumar...@samsung.com wrote:
This patch adds pinmux configuration for backlight, LCD reset
and HPD for DP panel on Exynos5 SMDK.
Signed-off-by: Ajay Kumar ajaykumar...@samsung.com
---
arch/arm/cpu/armv7/exynos/pinmux.c| 20
Ciao Vipin,
On 12/12/2012 01:04 PM, Vipin KUMAR wrote:
From: Armando Viscontiarmando.visco...@st.com
This patch adds the support for the ARM PL022 SPI controller for the standard
variant (0x00041022), which has a 16bit wide and 8 locations deep TX/RX FIFO.
Have you tested this patch on the
Hi Wolfgang,
On Tue, Dec 11, 2012 at 4:39 AM, Wolfgang Denk w...@denx.de wrote:
Dear Hatim Ali,
In message 1355223289-15685-5-git-send-email-hatim...@samsung.com you wrote:
From: Akshay Saraswat aksha...@samsung.com
Adding a generic polling function to continuously monitor events and
Hi Hatim,
On Tue, Dec 11, 2012 at 2:52 AM, Hatim Ali hatim...@samsung.com wrote:
Create a common configuration file for all exynos5250 based boards.
Going forward we will be using DT based driver discovery for all the boards
based on Exynos5. The different boards added will have there own
On Tue, Dec 11, 2012 at 2:52 AM, Hatim Ali hatim...@samsung.com wrote:
Add the configuration file for exynos5250 based SMDK5250 board.
Signed-off-by: Hatim Ali hatim...@samsung.com
Acked-by: Simon Glass s...@chromium.org
---
Changes since v2:
- No Change
Hi Rajeshwari,
On Mon, Dec 10, 2012 at 3:55 AM, Rajeshwari Shinde
rajeshwar...@samsung.com wrote:
Moved the pmic_max77686.c max77686_pmic.h to drivers/power
and made required changes accordingly
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
Acked-by: Simon Glass s...@chomium.org
Hi Rajeshwari,
On Mon, Dec 10, 2012 at 3:55 AM, Rajeshwari Shinde
rajeshwar...@samsung.com wrote:
Enabled pmic MAX77686 for SMDK5250.
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
With nit below fixed:
Acked-by: Simon Glass s...@chromium.org
---
Hi Ajay,
On Tue, Dec 11, 2012 at 3:01 AM, Ajay Kumar ajaykumar...@samsung.com wrote:
With VPLL as source clock to FIMD,
Exynos DP Initializaton was failing sometimes with unstable clock.
Changing FIMD source to resolves this issue.
Signed-off-by: Ajay Kumar ajaykumar...@samsung.com
On Tue, Dec 11, 2012 at 3:01 AM, Ajay Kumar ajaykumar...@samsung.com wrote:
When only DP is used, we need not enable CONFIG_EXYNOS_MIPI_DSIM.
Similarly, when only MIPI is used, we need not enable CONFIG_EXYNOS_DP.
But the current structuring of code forces us to enable both
Hi Rajeshwari,
On Mon, Dec 3, 2012 at 5:30 AM, Rajeshwari Shinde
rajeshwar...@samsung.com wrote:
This patch adds the device node required for USB
Signed-off-by: Vivek Gautam gautam.vi...@samsung.com
---
arch/arm/dts/exynos5250.dtsi |6 ++
1 files changed, 6 insertions(+), 0
Hi Ajay,
On Tue, Dec 11, 2012 at 3:01 AM, Ajay Kumar ajaykumar...@samsung.com wrote:
Add panel_info structure required by LCD driver
and DP panel platdata for SMDK5250.
Enable FIMD and DP support on SMDK5250.
DP Panel size: 2560x1600.
We use 16BPP resolution to get LCD console.
Hi Simon,
On Wed, Dec 12, 2012 at 12:01 PM, Simon Glass s...@chromium.org wrote:
Hi Jagan,
On Mon, Dec 10, 2012 at 10:37 PM, Jagan Teki jagannadh.t...@gmail.com wrote:
Hi Simon,
I understand your concern.
But currently there is no prints a/f reading/writing/erasing the SPI flash.
User's
Hi Simon,
On Wed, Dec 12, 2012 at 12:03 PM, Simon Glass s...@chromium.org wrote:
Hi,
On Mon, Dec 10, 2012 at 6:41 AM, Jagannadha Sutradharudu Teki
jagannadh.t...@gmail.com wrote:
This patch adds a print message on spi_flash_cmd_read_fast()
to make sure that how many bytes read from flash
On Tue, Dec 11, 2012 at 3:01 AM, Ajay Kumar ajaykumar...@samsung.com wrote:
Currently, exynos FIMD driver is being used to support only TIZEN LOGOs.
In order to get LCD console, we need to enable half word swap feature
of FIMD and use 16 BPP.
Signed-off-by: Ajay Kumar ajaykumar...@samsung.com
Add support for Numonyx N25Q064 SPI flash.
Signed-off-by: Jagannadha Sutradharudu Teki jagannadh.t...@gmail.com
---
drivers/mtd/spi/stmicro.c |6 ++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/drivers/mtd/spi/stmicro.c b/drivers/mtd/spi/stmicro.c
index 30b626a..9ec938a
Hi Hatim,
On Tue, Dec 11, 2012 at 2:54 AM, Hatim Ali hatim...@samsung.com wrote:
From: Akshay Saraswat aksha...@samsung.com
Fdt entry for Exynos TMU driver specific pre-defined values used for
calibration of current temperature and defining threshold values.
Signed-off-by: Akshay Saraswat
On Tue, Dec 11, 2012 at 3:34 PM, Tom Warren twarren.nvi...@gmail.com wrote:
Common Tegra files are in arch-tegra, shared between T20 and T30.
Tegra30-specific headers are in arch-tegra30. Note that some of
these will be filled in as more T30 support is added (drivers,
WB/LP0 support, etc.). A
On Tue, Dec 11, 2012 at 3:34 PM, Tom Warren twarren.nvi...@gmail.com wrote:
This provides SPL support for T30 boards - AVP early init, plus
CPU (A9) init/jump to main U-Boot.
Some changes were made to Tegra20 cpu.c to move common routines
into tegra-common/cpu.c and reduce code duplication.
Hi Jagan,
On Wed, Dec 12, 2012 at 6:43 AM, Jagan Teki jagannadh.t...@gmail.com wrote:
Hi Simon,
On Wed, Dec 12, 2012 at 12:01 PM, Simon Glass s...@chromium.org wrote:
Hi Jagan,
On Mon, Dec 10, 2012 at 10:37 PM, Jagan Teki jagannadh.t...@gmail.com
wrote:
Hi Simon,
I understand your
Hi,
On Wed, Dec 12, 2012 at 5:17 AM, Kyungmin Park kmp...@infradead.org wrote:
Hi,
On Wed, Dec 12, 2012 at 8:33 PM, Rajeshwari Shinde
rajeshwar...@samsung.com wrote:
This patch adds support for gpio pin numbering support on EXYNOS5
pinmux.
We already know that each exynos5 SoCs has
Hi Simon,
On Wed, Dec 12, 2012 at 8:31 PM, Simon Glass s...@chromium.org wrote:
Hi Jagan,
On Wed, Dec 12, 2012 at 6:43 AM, Jagan Teki jagannadh.t...@gmail.com wrote:
Hi Simon,
On Wed, Dec 12, 2012 at 12:01 PM, Simon Glass s...@chromium.org wrote:
Hi Jagan,
On Mon, Dec 10, 2012 at 10:37
Hi Simon,
On Wed, Dec 12, 2012 at 12:05 PM, Simon Glass s...@chromium.org wrote:
Hi,
On Mon, Dec 10, 2012 at 6:42 AM, Jagannadha Sutradharudu Teki
jagannadh.t...@gmail.com wrote:
This patch provides support to program a flash config register.
Configuration register contains the control
+Mike who is the maintainer
On Wed, Dec 12, 2012 at 7:16 AM, Jagan Teki jagannadh.t...@gmail.com wrote:
Hi Simon,
On Wed, Dec 12, 2012 at 8:31 PM, Simon Glass s...@chromium.org wrote:
Hi Jagan,
On Wed, Dec 12, 2012 at 6:43 AM, Jagan Teki jagannadh.t...@gmail.com wrote:
Hi Simon,
On Wed,
Hi Jagan,
On Wed, Dec 12, 2012 at 7:20 AM, Jagan Teki jagannadh.t...@gmail.com wrote:
Hi Simon,
On Wed, Dec 12, 2012 at 12:05 PM, Simon Glass s...@chromium.org wrote:
Hi,
On Mon, Dec 10, 2012 at 6:42 AM, Jagannadha Sutradharudu Teki
jagannadh.t...@gmail.com wrote:
This patch provides
Allen,
On Tue, Dec 11, 2012 at 5:45 PM, Allen Martin amar...@nvidia.com wrote:
On Tue, Dec 11, 2012 at 03:34:15PM -0800, Tom Warren wrote:
These files are used by both SPL and main U-Boot.
Also made minor changes to shared Tegra code to support
T30 differences.
Signed-off-by: Tom Warren
Hi Simon,
On Wed, Dec 12, 2012 at 8:53 PM, Simon Glass s...@chromium.org wrote:
Hi Jagan,
On Wed, Dec 12, 2012 at 7:20 AM, Jagan Teki jagannadh.t...@gmail.com wrote:
Hi Simon,
On Wed, Dec 12, 2012 at 12:05 PM, Simon Glass s...@chromium.org wrote:
Hi,
On Mon, Dec 10, 2012 at 6:42 AM,
Stephen,
On Tue, Dec 11, 2012 at 5:36 PM, Stephen Warren swar...@wwwdotorg.org wrote:
On 12/11/2012 04:34 PM, Tom Warren wrote:
Common Tegra files are in arch-tegra, shared between T20 and T30.
Tegra30-specific headers are in arch-tegra30. Note that some of
these will be filled in as more T30
Stephen,
On Tue, Dec 11, 2012 at 5:40 PM, Stephen Warren swar...@wwwdotorg.org wrote:
On 12/11/2012 04:34 PM, Tom Warren wrote:
This provides SPL support for T30 boards - AVP early init, plus
CPU (A9) init/jump to main U-Boot.
Some changes were made to Tegra20 cpu.c to move common routines
Dear Vipin Kumar,
+ ulong start = get_timer(0);
+
+ do {
+ ret = usb_get_port_status(dev, i + 1, portsts);
+ if (ret 0) {
+ USB_HUB_PRINTF(get_port_status failed\n);
+ break;
+
Hi Simon,
On Wed, Dec 12, 2012 at 12:11 PM, Simon Glass s...@chromium.org wrote:
Hi,
On Mon, Dec 10, 2012 at 6:42 AM, Jagannadha Sutradharudu Teki
jagannadh.t...@gmail.com wrote:
This patch provides support to program a flash using
Quad-input Page Program(32h) instruction.
This will
Dear Tom Rini,
On 12/10/12 19:47, Marek Vasut wrote:
Dear Lukasz Majewski,
Pantelis,
[...]
Hm hm ... I suspect it'd be nice to have a separate DFU custodian.
That'd leverage some burden from me. I like that idea. I wonder if
it'd be nice to start building such bigger net of
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 12/12/12 12:55, Marek Vasut wrote:
Dear Tom Rini,
On 12/10/12 19:47, Marek Vasut wrote:
Dear Lukasz Majewski,
Pantelis,
[...]
Hm hm ... I suspect it'd be nice to have a separate DFU
custodian. That'd leverage some burden from me. I
Dear Vipin Kumar,
In message
dba14c4ffef38a108f75342968bcd9ce2b75c4c7.1355303894.git.vipin.ku...@st.com
you wrote:
imls does not list the images in NAND devices. This patch implements this
support for legacy type images.
...
-static int do_imls(cmd_tbl_t *cmdtp, int flag, int argc, char *
Dear Simon Glass,
In message CAPnjgZ18daUnwQtAxtPOU43EGLA7=tn0efutbbzkntdy8da...@mail.gmail.com
you wrote:
Do we really need a new command here?
We already have dtt, which basicly does the same.
It makes no sense to add new commands for each new device, all doing
basicly trhe same,
Dear Simon Glass,
In message capnjgz0biqyy-k0rbrlomkqfk6pc1rjvgtmbluvp3wr9uss...@mail.gmail.com
you wrote:
If we add something like this, it should be general enough to be used
by other systems as well, i. e. please chose a generic API like plain
poweroff() or similar.
Maybe rename
Dear Simon Glass,
In message CAPnjgZ3VedAoM9tkzHoHWPi9cAJ=6wq4cdob0zqmgi7xwgw...@mail.gmail.com
you wrote:
If anything like this gets implemented, it has to be done in a way
that will be general enough to be useful to others as well.
Yes. It isn't really clear how this sort of
Static variables should be defined in C files, not header files, because
otherwise every C file that #includes the header file will generate a
duplicate of the variables. Since the vsc3316_xxx[] arrays are only
used by t4qds.c anyway, just put the variables there.
Signed-off-by: Timur Tabi
Hi Wolfgang,
On Wed, Dec 12, 2012 at 12:44 PM, Wolfgang Denk w...@denx.de wrote:
Dear Simon Glass,
In message
CAPnjgZ3VedAoM9tkzHoHWPi9cAJ=6wq4cdob0zqmgi7xwgw...@mail.gmail.com you
wrote:
If anything like this gets implemented, it has to be done in a way
that will be general
On 12/12/2012 02:11:46 AM, Martin Peevski wrote:
Hello, I have the following question. It is about the adresses
where the U-boot and Linux Kernel are copyed in the SDRAM from NAND.
In my board config file I have:
#define CONFIG_SYS_LOAD_ADDR0x2200/* load address
Dear Lukasz Majewski,
Hi Pantelis,
Tomorrow I will prepare output of USB Ellisys analizer on my side, so
we could get clue what is going on.
Please find attached output from USB ellisys analizer.
(It is possible to download WinXP based program to view logs without
USB analizer box).
Dear Robert P. J. Day,
On Tue, 11 Dec 2012, Lukasz Majewski wrote:
Hi Pantelis,
Tomorrow I will prepare output of USB Ellisys analizer on my side, so
we could get clue what is going on.
Please find attached output from USB ellisys analizer.
is it really appropriate to post
On 12/12/2012 09:23 AM, Tom Warren wrote:
Stephen,
On Tue, Dec 11, 2012 at 5:36 PM, Stephen Warren swar...@wwwdotorg.org wrote:
On 12/11/2012 04:34 PM, Tom Warren wrote:
Common Tegra files are in arch-tegra, shared between T20 and T30.
Tegra30-specific headers are in arch-tegra30. Note that
On 12/12/2012 09:14 AM, Tom Warren wrote:
Allen,
On Tue, Dec 11, 2012 at 5:45 PM, Allen Martin amar...@nvidia.com wrote:
On Tue, Dec 11, 2012 at 03:34:15PM -0800, Tom Warren wrote:
These files are used by both SPL and main U-Boot.
Also made minor changes to shared Tegra code to support
T30
On 12/11/2012 04:34 PM, Tom Warren wrote:
These files are used by both SPL and main U-Boot.
Also made minor changes to shared Tegra code to support
T30 differences.
Reviewed-by: Stephen Warren swar...@nvidia.com
(briefly!)
___
U-Boot mailing list
On 12/11/2012 04:34 PM, Tom Warren wrote:
These are stripped down for bringup, They'll be filled out later
to match-up with the kernel DT contents, and/or as devices are
brought up (mmc, usb, spi, etc.).
diff --git a/board/nvidia/dts/tegra30-cardhu.dts
b/board/nvidia/dts/tegra30-cardhu.dts
Dear Simon Glass,
In message CAPnjgZ0bmsJAx4MAk-+GLo+QLC-6zbgp24N=BNqO=2fsuik...@mail.gmail.com
you wrote:
Also, this should not be considered as somethin board specific as the
name board polling function might suggest. What is being discussed
here is not more and not less than support
On 12/11/2012 04:34 PM, Tom Warren wrote:
This patch adds basic Tegra30 (T30) build support - no specific
board is targeted.
Reviewed-by: Stephen Warren swar...@nvidia.com
___
U-Boot mailing list
U-Boot@lists.denx.de
On 12/11/2012 04:34 PM, Tom Warren wrote:
This build is stripped down. It boots to the command prompt.
GPIO is the only peripheral supported. Others TBD.
include/configs/tegra-common.h now holds common config options
for Tegra SoCs.
Reviewed-by: Stephen Warren swar...@nvidia.com
On Wed, Dec 12, 2012 at 6:46 AM, Jagan Teki jagannadh.t...@gmail.com wrote:
Hi Simon,
On Wed, Dec 12, 2012 at 12:03 PM, Simon Glass s...@chromium.org wrote:
Hi,
On Mon, Dec 10, 2012 at 6:41 AM, Jagannadha Sutradharudu Teki
jagannadh.t...@gmail.com wrote:
This patch adds a print message on
Hi Jagan,
On Wed, Dec 12, 2012 at 8:21 AM, Jagan Teki jagannadh.t...@gmail.com wrote:
Hi Simon,
On Wed, Dec 12, 2012 at 8:53 PM, Simon Glass s...@chromium.org wrote:
Hi Jagan,
On Wed, Dec 12, 2012 at 7:20 AM, Jagan Teki jagannadh.t...@gmail.com wrote:
Hi Simon,
On Wed, Dec 12, 2012 at
Hi Jagan,
On Wed, Dec 12, 2012 at 8:52 AM, Jagan Teki jagannadh.t...@gmail.com wrote:
Hi Simon,
On Wed, Dec 12, 2012 at 12:11 PM, Simon Glass s...@chromium.org wrote:
Hi,
On Mon, Dec 10, 2012 at 6:42 AM, Jagannadha Sutradharudu Teki
jagannadh.t...@gmail.com wrote:
This patch provides
Hi Tom,
On Tue, Dec 11, 2012 at 7:05 PM, Allen Martin amar...@nvidia.com wrote:
On Tue, Dec 11, 2012 at 03:34:11PM -0800, Tom Warren wrote:
This patch series adds basic (boot to cmd prompt) support for Tegra30.
This is based on the Tegra20 SPL, which initializes the AVP (ARM7TDMI)
boot proc)
On 12/12/2012 03:20:24 AM, Vipin Kumar wrote:
imls does not list the images in NAND devices. This patch implements
this
support for legacy type images.
Signed-off-by: Vipin Kumar vipin.ku...@st.com
---
Hello Scott,
There has been sometime since you reviewed the first version of this
patch.
Stephen,
On Wed, Dec 12, 2012 at 3:02 PM, Stephen Warren swar...@wwwdotorg.org wrote:
On 12/12/2012 09:23 AM, Tom Warren wrote:
Stephen,
On Tue, Dec 11, 2012 at 5:36 PM, Stephen Warren swar...@wwwdotorg.org
wrote:
On 12/11/2012 04:34 PM, Tom Warren wrote:
Common Tegra files are in
1 - 100 of 130 matches
Mail list logo