Hi Afzal Mohammed,
DFU spec mentions it as a method to upgrade firmware (software stored
in writable non-volatile memory). It also says other potential uses of
DFU is beyond scope of the spec.
Here such a beyond the scope use is being attempted - directly pumping
binary images from host
Hi Rob,
From: Rob Herring rob.herr...@calxeda.com
Much of the ARM timer code is re-implemented for each platform yet it
is all pretty much the same code.
This series introduces a common implementation of timer functions and
simplifies the platform code down to 2 or 3 config defines. It
Hello Minkyu,
On 09/03/2013 02:45 PM, Przemyslaw Marczak wrote:
This change allow to use sd card on Goni the same like mmc 0.
SD card is mmc dev 1, so it can be used like this: fatls mmc 1:2.
SD card is inited even if eMMC initialization fails.
Signed-off-by: Przemyslaw Marczak
Hello Minkyu,
On 09/03/2013 02:57 PM, Przemyslaw Marczak wrote:
On s5pc1xx mmc devices offset is multiply of 0x10,
wrong value was 0x1. Register offset always points
to mmc 0 before this change.
Add macro definition of mmc dev register offset to s5pc1xx and
exynos mmc.
Signed-off-by:
On Sun 08 Sep 2013 09:48:20 BST, Andreas Bießmann wrote:
Dear Paul Burton,
On 06.09.13 15:43, Paul Burton wrote:
For SPL builds this is just dead code since we'll only need to read.
Eliminating it results in a significant size reduction for the SPL
binary, which may be critical for certain
Hi,
On 09/03/2013 09:45 PM, Przemyslaw Marczak wrote:
This change allow to use sd card on Goni the same like mmc 0.
SD card is mmc dev 1, so it can be used like this: fatls mmc 1:2.
SD card is inited even if eMMC initialization fails.
Signed-off-by: Przemyslaw Marczak p.marc...@samsung.com
Dear Chander Kashyap,
On 06/09/13 13:32, Chander Kashyap wrote:
Hi Albert,
On 5 September 2013 18:58, Albert ARIBAUD albert.u.b...@aribaud.net wrote:
Hi Chander,
On Thu, 5 Sep 2013 17:36:34 +0530, Chander Kashyap
chander.kash...@linaro.org wrote:
Hi Albert,
On 5 September 2013 17:08,
Hi Paul,
On Sep 9, 2013, at 11:14 AM, Paul Burton wrote:
On Sun 08 Sep 2013 09:48:20 BST, Andreas Bießmann wrote:
Dear Paul Burton,
On 06.09.13 15:43, Paul Burton wrote:
For SPL builds this is just dead code since we'll only need to read.
Eliminating it results in a significant size
- Remove duplicate doc/README.p1010rdb
- Update for P1010RDB-PB board
P1010RDB-PB is a variation of previous P1010RDB-PA board.
Henceforth we support P1010RDB-PB board instead of P1010RDB-PA.
Signed-off-by: Shengzhou Liu shengzhou@freescale.com
---
v3: add frequency combination support
v2:
- Rename old P1010RDB board as P1010RDB-PA.
- Add support for new P1010RDB-PB board.
- Enable IFC flash access in case of SD boot via hwconfig or mux command.
- Some optimization and code cleanup.
For more details, see board/freescale/p1010rdb/README.
Signed-off-by: Shengzhou Liu
Dear Przemyslaw Marczak,
On 03/09/13 21:45, Przemyslaw Marczak wrote:
This change allow to use sd card on Goni the same like mmc 0.
SD card is mmc dev 1, so it can be used like this: fatls mmc 1:2.
SD card is inited even if eMMC initialization fails.
Signed-off-by: Przemyslaw Marczak
Hi,
SPL framework is used to support multi-stage booting. Where first
level boot loader is created via SPL having relocate_code() function.
I am working on a Freescale's SoC which has less internal SRAM.
I don't want to use relocate_code() as to support this function, I need
to reduce SPL
Hi,
SPL framework is used to support multi-stage booting. Where first
level boot loader is created via SPL having relocate_code() function.
I am working on a Freescale's SoC which has less internal SRAM.
I don't want to use relocate_code() as to support this function, I need
to reduce SPL
This change allow to use sd card on Goni the same like mmc 0.
SD card is mmc dev 1, so it can be used like this: fatls mmc 1:2.
SD card is inited even if eMMC initialization fails.
Signed-off-by: Przemyslaw Marczak p.marc...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
CC:
According to JEDEC eMMC specification, after data transfer
(multiple or single block) host must wait for card ready
status. This is done by waiting for command and data lines
to be at idle state after transfer. JEDEC does not specify
maximum timeout.
Before this change max timeout was 10 ms but
From: David Feng feng...@phytium.com.cn
The porting has been merged with arm architecture.
Most architecture codes are placed in arch/arm/cpu/armv8 directory.
Generic board is also supported after a few bugs are fixed.
Changes for v5:
- Make modification to inappropriate licensed file and bugs
From: David Feng feng...@phytium.com.cn
1. function board_init_f in board_f.c should firstly zero gd_t structure
before it call initcall_run_list, otherwise the debug print will go run
if DEBUG is defined. Because the printf function will use global data
to determine whether serial port
From: David Feng feng...@phytium.com.cn
This patch fix the fdt_initrd function.
It will get #adress_cells property fisrt, then write linux,initrd-start
and linux,initrd-end property value to fdt according to address cell size
such that the 64bit initrd start address could be supported.
From: David Feng feng...@phytium.com.cn
Signed-off-by: David Feng feng...@phytium.com.cn
---
common/cmd_pxe.c |4 ++--
lib/hashtable.c |1 +
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/common/cmd_pxe.c b/common/cmd_pxe.c
index a2fb50a..52375a4 100644
---
From: David Feng feng...@phytium.com.cn
Signed-off-by: David Feng feng...@phytium.com.cn
---
Changes for v5:
- add CONFIG_BOOTING_EL1 configuration to vexpress_aemv8a.h
board/armltd/dts/vexpress64.dts | 439 ++
board/armltd/vexpress64/Makefile | 43
Dear Rob Herring,
In message 1378670088-17602-1-git-send-email-robherri...@gmail.com you wrote:
...
diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h
index e59ee96..4c25289 100644
--- a/include/config_fallbacks.h
+++ b/include/config_fallbacks.h
@@ -53,4 +53,8 @@
Dear feng...@phytium.com.cn,
In message 1378734616-37558-3-git-send-email-feng...@phytium.com.cn you wrote:
From: David Feng feng...@phytium.com.cn
Signed-off-by: David Feng feng...@phytium.com.cn
---
Changes for v5:
- add CONFIG_BOOTING_EL1 configuration to vexpress_aemv8a.h
Dear feng...@phytium.com.cn,
In message 1378734616-37558-1-git-send-email-feng...@phytium.com.cn you wrote:
From: David Feng feng...@phytium.com.cn
The porting has been merged with arm architecture.
Most architecture codes are placed in arch/arm/cpu/armv8 directory.
Generic board is also
Dear feng...@phytium.com.cn,
In message 1378734616-37558-6-git-send-email-feng...@phytium.com.cn you wrote:
From: David Feng feng...@phytium.com.cn
Signed-off-by: David Feng feng...@phytium.com.cn
---
common/cmd_pxe.c |4 ++--
lib/hashtable.c |1 +
2 files changed, 3
Dear feng...@phytium.com.cn,
In message 1378734616-37558-4-git-send-email-feng...@phytium.com.cn you wrote:
From: David Feng feng...@phytium.com.cn
1. function board_init_f in board_f.c should firstly zero gd_t structure
before it call initcall_run_list, otherwise the debug print will go
This patch adds support for our companies board CDU9G25 with Atmel AT91SAM9G25,
128MB DDR2, 256MB NAND.
v.2
Fixed static IP and MAC addr cofiguration by random MAC and DHCP.
Added entry to MAINTAINERS.
Fixed line lenght, trailing spaces and other cosmetics.
Signed-off-by: Jiri Prchal
For SPL builds this is just dead code since we'll only need to read.
Eliminating it results in a significant size reduction for the SPL
binary, which may be critical for certain platforms where the binary
size is highly constrained.
Signed-off-by: Paul Burton paul.bur...@imgtec.com
Acked-by:
Dear lot...@denx.de,
Hi,
Following, an update for the m28evk board config, in order to support a
standard setup for sdcards having an uImage and FDT files on boot
partition (ext), and a rootfs partition (ext), as it will be used by the
latest ELDK and its yocto build recipes.
You
Dear lot...@denx.de,
From 24b6381162b4569ab86b481b8714d81877231f22 Mon Sep 17 00:00:00 2001
From: Lothar Rubusch lot...@denx.de
Date: Fri, 6 Sep 2013 15:01:39 +0200
Subject: [PATCH] m28evk board specific configurations for setup with ext
boot
partition and separate ext rootfs
On Sat, Sep 07, 2013 at 12:55:38AM +0200, Albert ARIBAUD wrote:
Hello Tom,
The following changes since commit
fb18fa95a14ae875ef0a5421cd9fecc00c7c3a4c:
Prepare v2013.10-rc2 (2013-09-02 14:20:36 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
On Wed, Sep 04, 2013 at 08:41:44AM -0400, Robert P. J. Day wrote:
Somewhere along the line of refactoring the am335x header files, the
kernel image load was lost, so put it back in.
Signed-off-by: Robert P. J. Day rpj...@crashcourse.ca
Applied to u-boot/master, thanks!
--
Tom
On Sat, Sep 07, 2013 at 09:50:15AM +0200, Stefan Roese wrote:
Hi Tom,
please pull the following fix:
The following changes since commit 1affd4d4a3fe512050e1ad1636d9360c670da531:
cam_enc_4xx: Move CONFIG_SPL_PAD_TO to a config header (2013-09-06 13:09:08
-0400)
are available in
On Mon, Sep 09, 2013 at 07:48:34AM +0200, Heiko Schocher wrote:
Hello Tom,
please pull from u-boot-i2c:
The following changes since commit 1affd4d4a3fe512050e1ad1636d9360c670da531:
cam_enc_4xx: Move CONFIG_SPL_PAD_TO to a config header (2013-09-06 13:09:08
-0400)
are available in
On 09/09/2013 09:06 AM, Wolfgang Denk wrote:
Dear Rob Herring,
In message 1378670088-17602-1-git-send-email-robherri...@gmail.com you
wrote:
...
diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h
index e59ee96..4c25289 100644
--- a/include/config_fallbacks.h
+++
On 09/09/2013 12:53 AM, Wolfgang Denk wrote:
Dear Rob Herring,
In message 1378671174-18535-1-git-send-email-robherri...@gmail.com you
wrote:
From: Rob Herring rob.herr...@calxeda.com
Much of the ARM timer code is re-implemented for each platform yet it
is all pretty much the same code.
Hi Lukasz Majewski,
On Mon, Sep 09, 2013 at 08:50:58AM +0200, Lukasz Majewski wrote:
usage: image name ram start address size
eg. kernel ram 0x8100 0x100
Downloading images to RAM using DFU is not something new, this is
acheived in openmoko also.
DFU on RAM can be used
Dear Rob,
In message 522de2ff.2080...@gmail.com you wrote:
What do I do with current boards that are wrong? I should make all these
Good question...
boards have build errors or fix them to use 1000 which may break them at
runtime depending on their possible misuse of CONFIG_SYS_HZ?
Dear Jiri Prchal,
In message 1378736524-30870-1-git-send-email-jiri.prc...@aksignal.cz you
wrote:
This patch adds support for our companies board CDU9G25 with Atmel
AT91SAM9G25, 128MB DDR2, 256MB NAND.
Please keep the line length of the commit message 70 characters.
v.2
Fixed static IP
On Sat, 2013-09-07 at 22:56 +0800, FengHua wrote:
Fisrt, thank scott for checking the patch.
-原始邮件-
发件人: Scott Wood scottw...@freescale.com
发送时间: 2013年9月7日 星期六
收件人: feng...@phytium.com.cn
抄送: u-boot@lists.denx.de, tr...@ti.com
主题: Re: [U-Boot] [PATCH v5 1/4] core support of
On Mon, Sep 9, 2013 at 2:13 AM, Lukasz Majewski l.majew...@samsung.com wrote:
Hi Rob,
From: Rob Herring rob.herr...@calxeda.com
Much of the ARM timer code is re-implemented for each platform yet it
is all pretty much the same code.
This series introduces a common implementation of timer
On Sun, Sep 8, 2013 at 6:56 PM, Benoît Thébaudeau
benoit.thebaud...@advansee.com wrote:
Dear Rob Herring,
On Sunday, September 8, 2013 10:12:50 PM, Rob Herring wrote:
From: Rob Herring rob.herr...@calxeda.com
Convert mx25 to use the commmon timer code.
Signed-off-by: Rob Herring
From: Fabio Estevam fabio.este...@freescale.com
The wandboard solo version should boot the 'imx6dl-wandboard.dtb' file, since
dual-lite and solo variants are the same SoC with only the number of cores being
different.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
Dear Rob Herring,
In message 522de0b3.20...@gmail.com you wrote:
If we consolidate code, it should always be done in a cross-platform
way, unless platform specifc code really cannot be avoided (which I
fail to see yet here).
I agree, but it appeared that at least some PPC platforms
If, in CONFIG_BOOTCOMMAND, the environment switches both the mmcdev
and bootpart variables to refer to MMC device 1, it would make sense
that the mmcroot env variable should switch to that device as well.
Signed-off-by: Robert P. J. Day rpj...@crashcourse.ca
---
i asked about this a while
On Fri, 2013-08-23 at 19:17 -0500, Scott Wood wrote:
On Fri, 2013-08-23 at 18:12 -0600, Simon Glass wrote:
Hi,
On Thu, Aug 22, 2013 at 8:55 AM, FengHua feng...@phytium.com.cn wrote:
On Thu, Aug 22, 2013 at 09:31:35AM +0800, FengHua wrote:
--
Dear Przemyslaw,
On 09/09/2013 09:50 PM, Przemyslaw Marczak wrote:
This change allow to use sd card on Goni the same like mmc 0.
SD card is mmc dev 1, so it can be used like this: fatls mmc 1:2.
SD card is inited even if eMMC initialization fails.
Signed-off-by: Przemyslaw Marczak
MMC and NAND independently defines same enumerators for read/write.
Unify them by defining enum in dfu header. RAM support that is being
added newly also can make use of it.
Signed-off-by: Afzal Mohammed afzal.mohd...@gmail.com
Cc: Lukasz Majewski l.majew...@samsung.com
Cc: Pantelis Antoniou
DFU spec mentions it as a method to upgrade firmware (software stored
in writable non-volatile memory). It also says other potential uses of
DFU is beyond scope of the spec.
Here such a beyond the scope use is being attempted - directly pumping
binary images from host via USB to RAM. This
Enable DFU for RAM, provide example dfu_alt_info
Signed-off-by: Afzal Mohammed afzal.mohd...@gmail.com
Cc: Tom Rini tr...@ti.com
Cc: Lukasz Majewski l.majew...@samsung.com
Cc: Pantelis Antoniou pa...@antoniou-consulting.com
---
v2: new
include/configs/am335x_evm.h | 6 ++
1 file changed, 6
Hit below build errors (on ARM platforms):
axel@phoenix:~/repos/git/u-boot$ make mx31pdk
Configuring for mx31pdk board...
make
make[1]: Entering directory `/home/axel/repos/git/u-boot'
Generating include/autoconf.mk
Generating include/autoconf.mk.dep
make[1]: Leaving directory
Chris,
Thanks a lot to bring this to our attention.
A brief look at the log shows the SPD wasn't found, probably due to recent I2C
change. We will address this issue as soon as possible.
York
Original Message
From: Chris Packham
Sent: Mon, 09/09/2013 22:26
To: u-boot
CC: sun
git bisect points to the following commit
00f792e0df9ae942427e44595a0f4379582accee is the first bad commit
commit 00f792e0df9ae942427e44595a0f4379582accee
Author: Heiko Schocher h...@denx.de
Date: Wed Oct 24 13:48:22 2012 +0200
i2c, fsl_i2c: switch to new multibus/multiadapter support
Hi,
I was just looking at something else and found that my P2041RDB no
longer boots from the master branch of u-boot.git (it hangs after DDR
initialisation). I checked 2013.10-rc1, same problem. 2013.07 works.
I haven't bisected further than that. I just thought I'd fire this off
now since it
Chris,
Thanks for the debugging work. As I suspected, it's related to I2C change. It's
probably a problem in the board header file. If you fix it, please submit a
patch. Otherwise, I will look into it tomorrow.
York
Original Message
From: Chris Packham
Sent: Mon, 09/09/2013
Hi Jack,
I hit below build error, revert commit 4412db464
standalone-examples: support custom GCC lib fixes the build error.
$ ./MAKEALL actux2
Configuring for actux2 board...
make[1]: *** [hello_world] Error 1
make: *** [examples/standalone] Error 2
textdata bss dec hex
55 matches
Mail list logo