Hello Tom, Wolfgang,
I CCed Vipin Kumar vipin.ku...@st.com and ended up in a bounce mail.
The error message I got from the mail server is as follows:
The original message was received at Tue, 16 Sep 2014 14:12:01 +0900 (JST)
from [157.8.1.157]
- The following addresses had
Scsi disks need to be probed before we try to access them, otherwise all
accesses fail with: ** Bad device size - scsi 0 **.
Reported-by: Karsten Merker mer...@debian.org
Signed-off-by: Hans de Goede hdego...@redhat.com
---
include/config_distro_bootcmd.h | 17 +++--
1 file changed,
Hi Tom,
Here is a bug-fix patch for config_distro_bootcmd which I would like to get
into v2014.10 .
Stephen, may we have your Acked-by for this one ?
Karsten, may we have your Reported-and-tested-by for this one ?
Thanks Regards,
Hans
___
U-Boot
Since CONFIG_CMD_EXPORTENV is defined in config_cmd_defaults.h,
it should be enabled for all the boards except bf506f-ezkit
that undefs it explicitely.
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
Acked-by: Simon Glass s...@chromium.org
Tested-by: Simon Glass s...@chromium.org
---
Since CONFIG_CMD_IMPORTENV is defined in config_cmd_defaults.h,
it should be enabled for all the boards except bf506f-ezkit
that undefs it explicitely.
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
Acked-by: Simon Glass s...@chromium.org
Tested-by: Simon Glass s...@chromium.org
---
Since CONFIG_CMD_GO is defined in config_cmd_defaults.h
(and no board undefs it its own header), it can be moved to
Kconfig with the default value y.
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
Acked-by: Simon Glass s...@chromium.org
Tested-by: Simon Glass s...@chromium.org
---
This would be useful to start moving various config options.
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
Acked-by: Simon Glass s...@chromium.org
Tested-by: Simon Glass s...@chromium.org
---
Changes in v2: None
Kconfig | 12 +++-
common/Kconfig |
Now config_cmd_defaults.h is empty so it can be deleted safely.
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
Acked-by: Simon Glass s...@chromium.org
---
Changes in v2: None
include/config_cmd_defaults.h | 13 -
scripts/Makefile.autoconf | 1 -
2 files changed, 14
CONFIG_CMD_BOOTM is defined in config_cmd_defaults.h
which is forcebly included from each board.
So, the default value of config CMD_BOOTM should be y.
For some boards undefining it (bf506f-ezkit, controlcenterd_TRAILBLA,
controlcenterd_TRAILBLAZER_DEVELOP, controlcenterd_TRAILBLAZER),
#
Since CONFIG_CMD_CRC32 is defined in config_cmd_defaults.h,
it is enabled for all the boards except the ones undefining it
explicitly:
kwb
tseries_mmc
tseries_nand
tseries_spi
vct_platinum_onenand_small
vct_platinum_small
vct_platinumavc_onenand_small
vct_platinumavc_small
If this option is enabled, the objects under lib/ directory
are compiled with speed optimization, not size optimization.
(Currently, only used by some Blackfin boards.)
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
Acked-by: Simon Glass s...@chromium.org
Tested-by: Simon Glass
Hi,
On 09/16/2014 08:07 AM, Karsten Merker wrote:
On Mon, Sep 15, 2014 at 07:59:09PM +0200, Hans de Goede wrote:
On 09/15/2014 07:22 PM, Stephen Warren wrote:
On 09/14/2014 12:00 PM, Hans de Goede wrote:
On 09/14/2014 05:43 PM, Karsten Merker wrote:
I am currently testing the new bootcmd
This commit moves:
CONFIG_OF_CONTROL
CONFIG_OF_SEPARATE
CONFIG_OF_EMBED
CONFIG_OF_HOSTFILE
Because these options are currently not supported for SPL,
the Device Tree Control menu does not appear in the SPL
configuration.
Note:
zynq-common.h should be adjusted so as not to change the
This option specifies the default Device Tree used for the run-time
configuration of U-Boot.
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
Cc: Simon Glass s...@chromium.org
Cc: Stephen Warren swar...@nvidia.com
Cc: Minkyu Kang mk7.k...@samsung.com
Cc: Michal Simek
Now we have the basic Kconfig infrastructure and we are ready
to move CONFIG options from header files to Kconfig.
We do not have to rush to do it at once.
We can do it little by little when we find some time.
(Of course, this task is too tedious to do by hand.
I wrote a script to do it
The User Register in GMAC IP is used to select interface type.
When with GE feature, it is used to select interface between
RGMII and GMII. If without GE feature, it is used to select
interface between MII and RMII.
Signed-off-by: Bo Shen voice.s...@atmel.com
---
drivers/net/macb.c | 8 +++-
This patch series add sama5d4ek board support which supports
following features:
- Boot media support: NAND flash/SD card/SPI flash
- Support LCD display
- Support ethernet
- Support USB mass storage
This patch series depends on the series [1]:
ARM: atmel: use pcr to enable or disable
From: Josh Wu josh...@atmel.com
Add a macro NO_GALOIS_TABLE_IN_ROM. If it is defined we will build a
runtime pmecc galois table.
Signed-off-by: Josh Wu josh...@atmel.com
Signed-off-by: Bo Shen voice.s...@atmel.com
---
drivers/mtd/nand/atmel_nand.c | 127
The code for this board supports following features:
- Boot media support: NAND flash/SD card/SPI flash
- Support LCD display
- Support ethernet
- Support USB mass storage
Signed-off-by: Bo Shen voice.s...@atmel.com
---
arch/arm/Kconfig | 4 +
Dear Marek,
In message 201409152348.15411.ma...@denx.de you wrote:
cm_write_bypass(
CLKMGR_BYPASS_PERPLLSRC_SET(
CLKMGR_BYPASS_PERPLLSRC_SELECT_EOSC1) |
CLKMGR_BYPASS_SDRPLLSRC_SET(
Hi Anatolij,
Please take a look at this patch:
https://www.mail-archive.com/u-boot@lists.denx.de/msg145208.html
function setup_gpmi_io_clk().
It's not in mainline yet, but Stefano already applied it to his tree,
and using it will both fix the problem, and get rid of all this code
duplication.
On 09/15/2014 01:06 PM, Marek Vasut wrote:
From: Pavel Machek pa...@denx.de
Add code necessary to program the FPGA part of SoCFPGA from U-Boot
with an RBF blob. This patch also integrates the code into the
FPGA driver framework in U-Boot so it can be used via the 'fpga'
command.
Hi!
I'd be interested in maintaining u-boot-socfpga repository. So far, we don't
have a repo for this platform and there is a large flurry of patches flying
around without any kind of central point for them. I'd like to get your
formal
consent for starting this and if you agree, I'd
On Tuesday, September 16, 2014 at 11:42:00 AM, Michal Simek wrote:
On 09/15/2014 01:06 PM, Marek Vasut wrote:
From: Pavel Machek pa...@denx.de
Add code necessary to program the FPGA part of SoCFPGA from U-Boot
with an RBF blob. This patch also integrates the code into the
FPGA driver
On 09/16/2014 12:12 PM, Marek Vasut wrote:
On Tuesday, September 16, 2014 at 11:42:00 AM, Michal Simek wrote:
On 09/15/2014 01:06 PM, Marek Vasut wrote:
From: Pavel Machek pa...@denx.de
Add code necessary to program the FPGA part of SoCFPGA from U-Boot
with an RBF blob. This patch also
Hi Christian,
On 09/09/2014 16:41, Christian Gmeiner wrote:
This patch adds support for the OT1200 series of devices.
Following components are used in u-boot:
+ ethernet
+ i2c
+ emmc
+ gpio
It looks incomplete or wrong. I see you set up sata, too.
The main difference between the
On 15/09/2014 15:56, nitin.g...@freescale.com wrote:
From: Nitin Garg nitin.g...@freescale.com
Provide cgtqmx6eval board its own variant of ddr
setup config file. Move board/freescale/imx/ddr/
mx6q_4x_mt41j128.cfg to board/freescale/mx6sabresd/
as this is was designed for the mx6sabresd
Hi Andrew,
On 12/08/2014 16:26, andrew.ru...@elecsyscorp.com wrote:
From: Andrew Ruder andrew.ru...@elecsyscorp.com
This patch moves mx35 to the common timer functions added in commit
8dfafdd - Introduce common timer functions Rob Herring
The (removed) mx35 timer code (specifically
On 30/08/2014 16:20, Marek Vasut wrote:
On Saturday, August 30, 2014 at 03:55:48 PM, Fabio Estevam wrote:
On Sat, Aug 30, 2014 at 9:40 AM, Marek Vasut ma...@denx.de wrote:
On Friday, August 29, 2014 at 07:08:54 PM, Fabio Estevam wrote:
[...]
+/* Extra U-Boot environment. */
+#define
Hi,
i try to boot the congatec board with u-boot.2014.04-rc1 from sd-card.
The Thread: http://lists.denx.de/pipermail/u-boot/2013-May/154298.html was my
guide.
My Steps are:
export CROSS_COMPILE=arm-cortexa9-linux-gnueabi- (the OSELAS 2012 toolchain)
export ARCH=arm
cd u-boot2014.04-rc1
make
The section name and the C variable name seem to be opposite.
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
Cc: Marek Vasut ma...@denx.de
---
include/linker_lists.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/linker_lists.h b/include/linker_lists.h
On 12/09/2014 13:06, Stefan Agner wrote:
This adds NAND support for the Vybrid tower system (TWR-VF65GS10)
provided by the vf610_nfc driver. Full 16-Bit bus width is
supported. Also an aditional config vf610twr_nand is introduced
which gets the environment from NAND. However, booting U-Boot
On 12/09/2014 13:06, Stefan Agner wrote:
This adds initial support for Freescale NFC (NAND Flash Controller)
found in ARM Vybrid SoC's, Power Architecture MPC5125 and others.
The driver is called vf610_nfc since this is the first supported
and tested hardware platform supported by the driver.
On 15/09/2014 08:59, Peng Fan wrote:
Define CONFIG_SYS_FSL_ESDHC_ADDR using USDHC4_BASE_ADDR which is used
in board_mmc_init.
If board_mmc_init failed, cpu_mmc_init-fsl_esdhc_mmc_init will use
CONFIG_SYS_FSL_ESDHC_ADDR to initialize sdhc. So set this macro to
correct value.
On 15/09/2014 08:59, Peng Fan wrote:
Define CONFIG_SYS_FSL_ESDHC_ADDR using USDHC4_BASE_ADDR.
USDHC3 and USDHC4 are both initialized in board_mmc_init. There is
no restriction on USDHC3 addr or USDHC4 addr should be assigned to
CONFIG_SYS_FSL_ESDHC_ADDR. So, just choose USDHC4_BASE_ADDR to
On 15/09/2014 08:59, Peng Fan wrote:
Define CONFIG_SYS_FSL_ESDHC_ADDR using USDHC2_BASE_ADDR which is
used in board_mmc_init.
Signed-off-by: Peng Fan peng@freescale.com
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
On 13/09/2014 23:21, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
i2c_pad_info1 is only used locally, so it can be made static.
Fix the following sparse warning:
board/freescale/mx6sxsabresd/mx6sxsabresd.c:160:22: warning: symbol
'i2c_pad_info1' was not
On 13/09/2014 23:21, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
Turn all local symbols into static in order to make sparse happy.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
Hi,
i've just pulled newest u-boot and tried it on my custom AM335x board
without success. It hangs after (successful) running init_s function.
Enable clock module - 44e0001c
Enable clock module - 44e000d0
Enable clock module - 44e00028
is the last debug output.
After some time the
On Tuesday, September 16, 2014 at 01:21:15 PM, Masahiro Yamada wrote:
The section name and the C variable name seem to be opposite.
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
Cc: Marek Vasut ma...@denx.de
Acked-by: Marek Vasut ma...@denx.de
Thanks for spotting this :)
Best
The arg_off() and arg_off_size() update the 'current NAND
device' variable (dev). This is then used when assigning the
(nand_info_t*)nand value. Place the assignment after the
arg_off(_size) calls to prevent using incorrect (nand_info_t*)
nand value.
Signed-off-by: Rostislav Lisovy
On 09/08/2014 05:57 PM, Masahiro YAMADA wrote:
Hi Stephen,
2014-09-09 0:04 GMT+09:00 Stephen Warren swar...@wwwdotorg.org:
I don't believe this is the correct approach; CONFIG_OF_CONTROL isn't a
user-configurable option, and hence shouldn't show up in *_defconfig.
select OF_CONTROL in
On 09/16/2014 09:33 AM, Masahiro Yamada wrote:
This commit moves:
CONFIG_OF_CONTROL
CONFIG_OF_SEPARATE
CONFIG_OF_EMBED
CONFIG_OF_HOSTFILE
Because these options are currently not supported for SPL,
the Device Tree Control menu does not appear in the SPL
configuration.
Note:
On Mon 2014-09-15 13:05:57, Marek Vasut wrote:
Add a few new variables to make the cache handling less cryptic.
Add a variable for DMA and DATA descriptor start and end, so the
correctness of the code is easier to inspect.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Chin Liang See
On Mon 2014-09-15 13:05:57, Marek Vasut wrote:
Add a few new variables to make the cache handling less cryptic.
Add a variable for DMA and DATA descriptor start and end, so the
correctness of the code is easier to inspect.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Chin Liang See
On Mon 2014-09-15 13:05:57, Marek Vasut wrote:
Add a few new variables to make the cache handling less cryptic.
Add a variable for DMA and DATA descriptor start and end, so the
correctness of the code is easier to inspect.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Chin Liang See
On Mon 2014-09-15 13:06:02, Marek Vasut wrote:
Sort the list of functional block addresses and fix indentation.
No functional change.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Chin Liang See cl...@altera.com
Cc: Dinh Nguyen dingu...@altera.com
Cc: Albert Aribaud
On Mon 2014-09-15 13:05:57, Marek Vasut wrote:
Add a few new variables to make the cache handling less cryptic.
Add a variable for DMA and DATA descriptor start and end, so the
correctness of the code is easier to inspect.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Chin Liang See
On Mon 2014-09-15 13:05:57, Marek Vasut wrote:
Add a few new variables to make the cache handling less cryptic.
Add a variable for DMA and DATA descriptor start and end, so the
correctness of the code is easier to inspect.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Chin Liang See
On Mon 2014-09-15 13:05:57, Marek Vasut wrote:
Add a few new variables to make the cache handling less cryptic.
Add a variable for DMA and DATA descriptor start and end, so the
correctness of the code is easier to inspect.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Chin Liang See
On Mon 2014-09-15 13:05:57, Marek Vasut wrote:
Add a few new variables to make the cache handling less cryptic.
Add a variable for DMA and DATA descriptor start and end, so the
correctness of the code is easier to inspect.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Chin Liang See
On Mon 2014-09-15 13:05:57, Marek Vasut wrote:
Add a few new variables to make the cache handling less cryptic.
Add a variable for DMA and DATA descriptor start and end, so the
correctness of the code is easier to inspect.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Chin Liang See
Hi!
On Mon 2014-09-15 13:05:53, Marek Vasut wrote:
This entire RFC series is the first stab at making SoCFPGA usable with
mainline U-Boot again. There are still some bits missing, but in general,
this allows me to use mainline U-Boot on my SoCFPGA systems. The big
missing part is the SPL
Hi Stefano,
On Fri, 12 Sep 2014 16:03:15 +0200, Stefano Babic sba...@denx.de
wrote:
Hi Albert,
please pull from u-boot-imx, thanks !
Underway.
Note that in the commits that you have added past 4c97... (which I did
*not* take in this PR, of course), there is this one:
d6d07a9b... arm:
On Tue, Sep 16, 2014 at 10:31 AM, Albert ARIBAUD
albert.u.b...@aribaud.net wrote:
Note that in the commits that you have added past 4c97... (which I did
*not* take in this PR, of course), there is this one:
d6d07a9b... arm: vf610: add NAND support for vf610twr
Which causes a warning when
Hi Albert,
On 16/09/2014 15:31, Albert ARIBAUD wrote:
Hi Stefano,
On Fri, 12 Sep 2014 16:03:15 +0200, Stefano Babic sba...@denx.de
wrote:
Hi Albert,
please pull from u-boot-imx, thanks !
Underway.
Note that in the commits that you have added past 4c97... (which I did
*not* take
On Tue, Sep 16, 2014 at 02:17:01PM +0200, Hannes Petermaier wrote:
Hi,
i've just pulled newest u-boot and tried it on my custom AM335x
board without success. It hangs after (successful) running init_s
function.
Enable clock module - 44e0001c
Enable clock module - 44e000d0
Enable
commit d6d07a9b... arm: vf610: add NAND support for vf610twr
generates the following warnings:
WARNING: no status info for 'vf610twr_nand'
WARNING: no maintainers for 'vf610twr_nand'WARNING: no status info for
'vf610twr_nand'
This is due to the fact that vf610twr_nand_defconfig has no
Hello Hannes, Tom,
On di, 2014-09-16 at 09:56 -0400, Tom Rini wrote:
On Tue, Sep 16, 2014 at 02:17:01PM +0200, Hannes Petermaier wrote:
Hi,
i've just pulled newest u-boot and tried it on my custom AM335x
board without success. It hangs after (successful) running init_s
function.
We should pass the MMC1 base address into CONFIG_SYS_FSL_ESDHC_ADDR.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
include/configs/mx25pdk.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
index
Let's enable CONFIG_SYS_GENERIC_BOARD in order to get rid of warnings related
to generic board support is not in place.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
include/configs/mx25pdk.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/mx25pdk.h
On 09/16/2014 01:26 AM, Hans de Goede wrote:
Scsi disks need to be probed before we try to access them, otherwise all
accesses fail with: ** Bad device size - scsi 0 **.
Reviewed-by: Stephen Warren swar...@nvidia.com
___
U-Boot mailing list
Hi Stefano,
On Fri, 12 Sep 2014 16:03:15 +0200, Stefano Babic sba...@denx.de
wrote:
Hi Albert,
please pull from u-boot-imx, thanks !
The board cm_fx6 cannot be built due to a couple of missing patches that
are already merged into u-boot-spi. Please ignore this issue, the board
will be
On 08/30/2014 10:13 AM, Tom Rini wrote:
As it stands today this breaks building a number of PXA boards so it
needs to be picked up and re-worked / build tested, thanks!
I'm still planning on getting back to this and taking a look. At the
time I was on a slightly older version of U-Boot
Hi Albert,
On 16/09/2014 16:38, Albert ARIBAUD wrote:
Hi Stefano,
On Fri, 12 Sep 2014 16:03:15 +0200, Stefano Babic sba...@denx.de
wrote:
Hi Albert,
please pull from u-boot-imx, thanks !
The board cm_fx6 cannot be built due to a couple of missing patches that
are already merged into
On 09/15/2014 06:06 AM, Marek Vasut wrote:
Pull out functions to read frequency of Main clock VCO and
PLL clock VCO as the code is duplicated multiple times.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Chin Liang See cl...@altera.com
Cc: Dinh Nguyen dingu...@altera.com
Cc: Albert Aribaud
On 09/15/2014 06:06 AM, Marek Vasut wrote:
From: Pavel Machek pa...@denx.de
Make the SoCFPGA MMC stub pick clock via the clock manager
frequency accessors instead of hard-coding the frequency.
Also fix calloc() misuse.
Signed-off-by: Pavel Machek pa...@denx.de
Signed-off-by: Marek
Signed-off-by: Stefan Herbrechtsmeier ste...@herbrechtsmeier.net
---
include/configs/omap3_overo.h | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index b17e495..d042eea 100644
---
Signed-off-by: Stefan Herbrechtsmeier ste...@herbrechtsmeier.net
---
board/overo/overo.c | 34 ++
include/configs/omap3_overo.h | 8
2 files changed, 42 insertions(+)
diff --git a/board/overo/overo.c b/board/overo/overo.c
index
Move ethernet setup to the board_eth_init function and select
the available network devices via expansion id.
Signed-off-by: Stefan Herbrechtsmeier ste...@herbrechtsmeier.net
---
board/overo/overo.c | 76 +
1 file changed, 47 insertions(+), 29
At the moment the boot loader use a common configuration for all Gumstix
Overo expansion boards. This also includes configuration of all inputs
and outputs even if they aren't used by the boot loader. Because the
Overo module could be used on foreign expansion boards with different
configurations
Separate overo module and expansion board MUX configuration. This allows
an foreign expansion board to use the boot loader without any adaption.
It only needs to save the expansion name in the EEPROM to load a
specific device tree.
Signed-off-by: Stefan Herbrechtsmeier ste...@herbrechtsmeier.net
Commit 12cc54376768461533b55ada1b0b6d4979f40579 'omap3: overo: Select
fdtfile for expansion board' wrongly missed the operator in the fdtfile
test. Update the test to only overwrite an empty fdtfile environment
variable.
Signed-off-by: Stefan Herbrechtsmeier ste...@herbrechtsmeier.net
---
On 09/15/2014 06:06 AM, Marek Vasut wrote:
The timer reload value is a property of the timer hardware and there
is no reason for this to be configurable. Place this into the timer
driver just like on the other hardware.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Chin Liang See
On Monday, September 15, 2014 at 05:34:51 PM, Dinh Nguyen wrote:
On 09/15/2014 06:05 AM, Marek Vasut wrote:
From: Pavel Machek pa...@denx.de
Remove this symbol from configs, since it's unused.
Signed-off-by: Pavel Machek pa...@denx.de
Signed-off-by: Marek Vasut ma...@denx.de
Cc:
On Monday, September 15, 2014 at 06:28:20 PM, Dinh Nguyen wrote:
On 09/15/2014 06:06 AM, Marek Vasut wrote:
From: Pavel Machek pa...@denx.de
This adds watchdog disable. It is neccessary for running Linux kernel.
Signed-off-by: Pavel Machek pa...@denx.de
Signed-off-by: Marek Vasut
On 09/16/2014 08:18 AM, Pavel Machek wrote:
Hi!
On Mon 2014-09-15 13:05:53, Marek Vasut wrote:
This entire RFC series is the first stab at making SoCFPGA usable with
mainline U-Boot again. There are still some bits missing, but in general,
this allows me to use mainline U-Boot on my SoCFPGA
Add bit definitons for various anadig registers as
required by various drivers.
Signed-off-by: Nitin Garg nitin.g...@freescale.com
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/include/asm/arch-mx6/crm_regs.h | 543 +-
1 file changed, 542
i.MX6 SoC has onchip temperature sensor. Add driver
for this sensor.
Signed-off-by: Nitin Garg nitin.g...@freescale.com
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/Makefile |1 +
drivers/thermal/Makefile |8 +++
Add api to check and enable pll3 as required
for thermal sensor driver.
Signed-off-by: Nitin Garg nitin.g...@freescale.com
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/cpu/armv7/mx6/clock.c| 25 +
This patch set adds i.MX6 thermal sensor driver
and enables it for mx6sabre boards. Also adds
various anadig bit definitions as required for
upcoming drivers.
Changes in v4:
-Added imx6 thermal sensor as a driver
-Renamed the config define to be more meaningful
-Move the clock code to clock.c
Add CONFIG_IMX6_THERMAL to mx6sabre_common.h file. Since
thermal driver depends on ocotp, make sure to enable
CONFIG_MXC_OCOTP when CONFIG_IMX6_THERMAL is slected.
Signed-off-by: Nitin Garg nitin.g...@freescale.com
---
Changes in v4:
-Added imx6 thermal sensor as a driver
-Renamed the config
read cpu temperature using the onchip thermal
sensor.
Signed-off-by: Nitin Garg nitin.g...@freescale.com
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/imx-common/cpu.c |8 +++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git
Hi Nikita,
On Tue, 16 Sep 2014 11:55:04 +0300
Nikita Kiryanov nik...@compulab.co.il wrote:
Please take a look at this patch:
https://www.mail-archive.com/u-boot@lists.denx.de/msg145208.html
function setup_gpmi_io_clk().
It's not in mainline yet, but Stefano already applied it to his tree,
When CONFIG_SECURE_BOOT is enabled, the signed images
like kernel and dtb can be authenticated using iMX6 CAAM.
The added command hab_auth_img can be used for HAB
authentication of images. The command takes the image
DDR location, IVT (Image Vector Table) offset inside
image as parameters.
Hi,
On 16-09-14 16:11, Jeroen Hofstee wrote:
Hello Hannes, Tom,
On di, 2014-09-16 at 09:56 -0400, Tom Rini wrote:
On Tue, Sep 16, 2014 at 02:17:01PM +0200, Hannes Petermaier wrote:
Hi,
i've just pulled newest u-boot and tried it on my custom AM335x
board without success. It hangs after
Hi Stefano,
On 09/12/2014 03:46 AM, Stefano Babic wrote:
Hi Nitin,
On 04/09/2014 03:18, Nitin Garg wrote:
When CONFIG_SECURE_BOOT is enabled, the signed images
like kernel and dtb can be authenticated using iMX6 CAAM.
The added command hab_auth_img can be used for HAB
authentication of
Hi Stefano,
On 09/11/2014 04:01 AM, Stefano Babic wrote:
Hi Nitin,
On 02/09/2014 00:48, nitin.g...@freescale.com wrote:
From: Nitin Garg nitin.g...@freescale.com
i.MX6 SoC has onChip temperature sensor. Add support
for this sensor.
Signed-off-by: Nitin Garg nitin.g...@freescale.com
Hi,
Didn't realized that this config needs a maintainer too, sorry. I agree,
since the vf610twr is maintained by Alison, it makes sense that the nand
variant is maintained by Alison too..
Thanks for the patch.
--
Stefan
Am 2014-09-16 16:08, schrieb Stefano Babic:
commit d6d07a9b... arm:
On Monday, September 15, 2014 at 09:25:09 PM, Dinh Nguyen wrote:
On 09/15/2014 06:06 AM, Marek Vasut wrote:
The inlining is done by GCC whe needed, there is no need to do it
s/whe/when.
Acked-by: Dinh Nguyen dingu...@opensource.altera.com
thanks...
Fixed, thanks!
Best regards,
Marek
On Monday, September 15, 2014 at 10:09:34 PM, Dinh Nguyen wrote:
On 09/15/2014 06:06 AM, Marek Vasut wrote:
[...]
+ /* get the L4 SP clock which supplied to UART */
+ reg = readl(clock_manager_base-main_pll.maindiv);
+ reg = CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_GET(reg);
+ clock =
On Monday, September 15, 2014 at 05:41:51 PM, Wolfgang Denk wrote:
Dear Marek Vasut,
In message 1410779188-6880-26-git-send-email-ma...@denx.de you wrote:
From: Pavel Machek pa...@denx.de
Add code necessary to program the FPGA part of SoCFPGA from U-Boot
with an RBF blob. This patch
On Tuesday, September 16, 2014 at 03:16:38 PM, Pavel Machek wrote:
On Mon 2014-09-15 13:05:57, Marek Vasut wrote:
Add a few new variables to make the cache handling less cryptic.
Add a variable for DMA and DATA descriptor start and end, so the
correctness of the code is easier to inspect.
On Tuesday, September 16, 2014 at 12:33:02 PM, Michal Simek wrote:
On 09/16/2014 12:12 PM, Marek Vasut wrote:
On Tuesday, September 16, 2014 at 11:42:00 AM, Michal Simek wrote:
On 09/15/2014 01:06 PM, Marek Vasut wrote:
From: Pavel Machek pa...@denx.de
Add code necessary to program the
On Tuesday, September 16, 2014 at 06:28:52 PM, Dinh Nguyen wrote:
On 09/16/2014 08:18 AM, Pavel Machek wrote:
Hi!
On Mon 2014-09-15 13:05:53, Marek Vasut wrote:
This entire RFC series is the first stab at making SoCFPGA usable with
mainline U-Boot again. There are still some bits
Hi Everyone,
I have an SD Card which has 2 FAT partitions. U-boot is in the first Boot
partition and i have a text file to be read which is in another partition.
I want to read this file in the U-boot config file under
CONFIG_BOOTCOMMAND. can anyone please let me know what commands U-boot
Dear harsha kiran,
In message 1410889741235-189502.p...@n7.nabble.com you wrote:
Hi Everyone,
I have an SD Card which has 2 FAT partitions. U-boot is in the first Boot
partition and i have a text file to be read which is in another partition.
OK - and what exactly is your problem? If you
On Tue, 16 Sep 2014, Marek Vasut wrote:
On Tuesday, September 16, 2014 at 06:28:52 PM, Dinh Nguyen wrote:
On 09/16/2014 08:18 AM, Pavel Machek wrote:
Hi!
On Mon 2014-09-15 13:05:53, Marek Vasut wrote:
This entire RFC series is the first stab at making SoCFPGA usable with
On Tue, 16 Sep 2014, Marek Vasut wrote:
On Tuesday, September 16, 2014 at 06:28:52 PM, Dinh Nguyen wrote:
On 09/16/2014 08:18 AM, Pavel Machek wrote:
Hi!
On Mon 2014-09-15 13:05:53, Marek Vasut wrote:
This entire RFC series is the first stab at making SoCFPGA usable with
On Tuesday, September 16, 2014 at 11:35:38 PM, dinguyen wrote:
On Tue, 16 Sep 2014, Marek Vasut wrote:
On Tuesday, September 16, 2014 at 06:28:52 PM, Dinh Nguyen wrote:
On 09/16/2014 08:18 AM, Pavel Machek wrote:
Hi!
On Mon 2014-09-15 13:05:53, Marek Vasut wrote:
This entire
1 - 100 of 165 matches
Mail list logo