Hi Peng, Tim,
On 19/05/2015 02:21, Peng Fan wrote:
U-Boot 2015.07-rc1-00260-g44bf513 (May 19 2015 - 09:14:52)
CPU: Freescale i.MX6SX rev1.2 996 MHz (running at 792 MHz)
CPU: Extended Commercial temperature grade (-20C to 105C) at 33C
Reset cause: POR
Board: MX6SX SABRE SDB
I2C:
Hi Prabhakar, Eric,
On 18/05/2015 16:44, Eric Nelson wrote:
Hi Prabhakar,
On 05/18/2015 04:43 AM, Prabhakar Kushwaha wrote:
Fix below warning
arch/arm/imx-common/cpu.c:29:14: warning: ‘get_reset_cause’ defined but
not used
static char *get_reset_cause(void)
Signed-off-by: Prabhakar
Hi,
On 19-05-15 12:54, Josh Wu wrote:
From: Bo Shen voice.s...@atmel.com
As the cache coherence issue in OHCI HCD, when enable I/D cache
for sama5d3 SoC, the OHCI can not work properly. So, switch to
EHCI, then the USB can work well.
Signed-off-by: Bo Shen voice.s...@atmel.com
[rebase to
Hi, Hans
On 5/19/2015 6:57 PM, Hans de Goede wrote:
Hi,
On 19-05-15 12:54, Josh Wu wrote:
From: Bo Shen voice.s...@atmel.com
As the cache coherence issue in OHCI HCD, when enable I/D cache
for sama5d3 SoC, the OHCI can not work properly. So, switch to
EHCI, then the USB can work well.
Hi,
On 19-05-15 12:44, Josh Wu wrote:
Remove the CONFIG_DM_USB limitation to enable cache support functions.
Tested on SAMA5D3x-EK board.
Signed-off-by: Josh Wu josh...@atmel.com
Looks good to me:
Acked-by: Hans de Goede hdego...@redhat.com
Regards,
Hans
---
Remove the CONFIG_DM_USB limitation to enable cache support functions.
Tested on SAMA5D3x-EK board.
Signed-off-by: Josh Wu josh...@atmel.com
---
drivers/usb/host/ohci-hcd.c | 10 +-
drivers/usb/host/ohci.h | 2 +-
2 files changed, 2 insertions(+), 10 deletions(-)
diff --git
The following changes since commit 0e6b7a28243175ae0874d53b6e6e4eff8548d71f:
Merge git://git.denx.de/u-boot-samsung (2015-05-18 09:15:15 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-usb.git HEAD
for you to fetch changes up to
From: Bo Shen voice.s...@atmel.com
As the cache coherence issue in OHCI HCD, when enable I/D cache
for sama5d3 SoC, the OHCI can not work properly. So, switch to
EHCI, then the USB can work well.
Signed-off-by: Bo Shen voice.s...@atmel.com
[rebase to mainline]
Signed-off-by: Josh Wu
Hi,
On 12 May 2015 at 07:53, Altunbas Sabri (DC-IA/EAH2)
sabri.altun...@boschrexroth.de wrote:
Hi All,
I use u-boot for altera socfpga cyclone 5 and want to include
gpio-functionality with
#define CONFIG_CMD_GPIO
in file
uboot-socfpga/include/configs/ socfpga_cyclone5.h
and get the
Hi Joe,
2015-05-20 3:21 GMT+09:00 Joe Hershberger joe.hershber...@ni.com:
This will ensure that the order of the defconfig entries will always
match that of the Kconfig files. After one slightly painful (but
still early in the process) pass over all boards, this should keep
the defconfigs
2015-05-20 3:17 GMT+09:00 Simon Glass s...@chromium.org:
In my case I do some work on an old distro and on that machine I have
wget, but not python 3.
8 snip 8
One option there might be Python 2 and urllib2 like buildman? In
general it is nice to support older platforms if we can as it
Signed-off-by: Masahiro Yamada yamada.masah...@socionext.com
---
arch/powerpc/dts/.gitignore | 1 +
1 file changed, 1 insertion(+)
create mode 100644 arch/powerpc/dts/.gitignore
diff --git a/arch/powerpc/dts/.gitignore b/arch/powerpc/dts/.gitignore
new file mode 100644
index 000..b60ed20
Hi Matthew,
On Thu, May 14, 2015 at 7:39 PM, Matthew Starr mst...@hedonline.com wrote:
It appears that setting CONFIG_MXC_USB_PORT to 0 then loads the OTG port on
the i.MX53. The code appears to be in drivers/usb/host/ehci-mx5.c.The
problem then is that the USB host port is then not
Hi Stephen,
On 19 May 2015 at 19:44, Stephen Warren swar...@wwwdotorg.org wrote:
On 05/19/2015 05:27 PM, Simon Glass wrote:
+Tom Rini in case he is interested...
Hi Stephen,
On 19 May 2015 at 15:36, Stephen Warren swar...@wwwdotorg.org wrote:
On 05/19/2015 12:01 PM, Simon Glass wrote:
Hi
On 05/19/2015 05:27 PM, Simon Glass wrote:
+Tom Rini in case he is interested...
Hi Stephen,
On 19 May 2015 at 15:36, Stephen Warren swar...@wwwdotorg.org wrote:
On 05/19/2015 12:01 PM, Simon Glass wrote:
Hi Stephen,
On 19 May 2015 at 09:41, Stephen Warren swar...@wwwdotorg.org wrote:
We should not hardcode MXS_DMA_ALIGNMENT to 32, since we can not guarantee
that socs' cache line size is 32 bytes.
If on chips whose cache line size is 64 bytes, error occurs:
NAND: ERROR: v7_dcache_inval_range - start address is not aligned - 0xbdf1d1a0
ERROR: v7_dcache_inval_range - stop
2015-05-20 2:51 GMT+09:00 Joe Hershberger joe.hershber...@gmail.com:
Hi Masahiro-san,
On Mon, May 18, 2015 at 10:23 PM, Masahiro Yamada
yamada.masah...@socionext.com wrote:
2015-05-16 6:40 GMT+09:00 Joe Hershberger joe.hershber...@ni.com:
A common case for failed builds is a missing
+Tom Rini in case he is interested...
Hi Stephen,
On 19 May 2015 at 15:36, Stephen Warren swar...@wwwdotorg.org wrote:
On 05/19/2015 12:01 PM, Simon Glass wrote:
Hi Stephen,
On 19 May 2015 at 09:41, Stephen Warren swar...@wwwdotorg.org wrote:
On 05/18/2015 03:33 PM, Simon Glass wrote:
2015-05-20 0:33 GMT+09:00 Joe Hershberger joe.hershber...@gmail.com:
+if len(failed_boards) 0:
+msg = [ The following boards were not processed due to error:
]
+msg += failed_boards
+print msg
This is an extra print.
Fixed. Thanks!
--
On Tue, 2015-05-19 at 17:38 -0500, Scott Wood wrote:
On Tue, 2015-05-19 at 15:29 -0700, Andrei Yakimov wrote:
I did not compiling latest, I still in 2011.9 and 2.6.38.
I have go over latest kernel and can see they using
NAND_CMD_PARAM with sub command 0x40 - to get JEDEC
information, it
This tool was originally written for my local use to ease the task
of tons of CONFIG moves, but there have been some requests for
mainlining it.
So, I have tidied up the code with nicer comments, and here it is.
See the comment block of the script for usage.
The first draft was
This tool was originally written for my local use to ease the task
of tons of CONFIG moves, but there have been some requests for
mainlining it.
So, I have tidied up the code with nicer comments, and here it is.
See the comment block of the script for usage.
The first draft was
2015-05-20 2:58 GMT+09:00 Joe Hershberger joe.hershber...@gmail.com:
Hi Masahiro-san,
On Mon, May 18, 2015 at 11:33 PM, Masahiro Yamada
yamada.masah...@socionext.com wrote:
2015-05-16 6:40 GMT+09:00 Joe Hershberger joe.hershber...@ni.com:
This is helpful to re-attempt to move failed boards
Hi Tim,
On 15/05/2015 20:59, Scott Wood wrote:
On Thu, 2015-05-14 at 11:48 -0700, Tim Harvey wrote:
The readenv() implementation of env_nand uses the mtd layer which is
unnecessary overhead in SPL when we already have a nand_spl_load_image()
function that doesn't need it. Using this instead
On 18/05/2015 01:10, Nikolay Dimitrov wrote:
Signed-off-by: Nikolay Dimitrov picmas...@mail.bg
---
configs/riotboard_defconfig |2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/riotboard_defconfig b/configs/riotboard_defconfig
index c0b689b..ae0036a 100644
---
On 18/05/2015 01:10, Nikolay Dimitrov wrote:
Signed-off-by: Nikolay Dimitrov picmas...@mail.bg
---
configs/marsboard_defconfig |2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/marsboard_defconfig b/configs/marsboard_defconfig
index f54fdd0..460e2d0 100644
---
On Mon, May 18, 2015 at 4:25 PM, Fabio Estevam feste...@gmail.com wrote:
Hi Tim,
On Fri, May 8, 2015 at 10:28 PM, Tim Harvey thar...@gateworks.com wrote:
Falcon mode entails the SPL booting the OS directly instead of U-Boot.
I would like to give this a try, but I am not sure where the dtb
Hi,
On 17-05-15 12:25, Ian Campbell wrote:
On Fri, 2015-05-15 at 20:43 +0200, Hans de Goede wrote:
Some A33 based boards use odt, while others do not, so make odt_en
configurable for sun8i too by moving the existing Kconfig option for it out
of the #if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
Make DRAM_ODT_EN Kconfig setting a bool, add a separate DRAM_ODT_CORRECTION
setting for A23 SoCs and use DRAM_ODT_EN Kconfig everywhere instead of
only in dram_sun4i.c and hardcoding odt_en elsewhere.
Note this commit makes no functional changes for existing boards,
its purpose is to allow
On 15/05/2015 21:10, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
The 'mx6-microsom' directory was only used for the previous mx6solo
hummingboard support, which has been removed in favour of the SPL
version.
Remove the remaining piece of the old mx6solo
On 18/05/2015 13:43, Prabhakar Kushwaha wrote:
Fix below warning
arch/arm/imx-common/cpu.c:29:14: warning: ‘get_reset_cause’ defined but
not used
static char *get_reset_cause(void)
Signed-off-by: Prabhakar Kushwaha prabha...@freescale.com
---
Applied to u-boot-imx, thanks !
Best
Hi Peter,
On 11/05/2015 18:22, Peter Robinson wrote:
There's a lot of common options in the i.MX6 boards that are repeated across
a
lot of the devices. There's a mx6_common.h which is little used but makes
sense
to be the central location for all the options we want across all mx6 boards
On 18/05/2015 01:10, Nikolay Dimitrov wrote:
Signed-off-by: Nikolay Dimitrov picmas...@mail.bg
---
include/configs/embestmx6boards.h |1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/embestmx6boards.h
b/include/configs/embestmx6boards.h
index e9f5bed..16b5826
Hi Peng,
On 18/05/2015 07:37, Peng Fan wrote:
Enable IOMUX_CONFIG_SION for all I2C pin mux settings, otherwise
we will get erros when doing i2c operations.
error log like the following:
wait_for_sr_state: failed sr=81 cr=a0 state=2020
i2c_init_transfer: failed for chip 0xb retry=1
On 18/05/2015 16:07, Tim Harvey wrote:
Commit fa8b7d66f49f0c7bd41467fe78f6488d8af6976a introduced fast-exit support
to the MMDC however enabling it on the DDR3 got missed. Make sure we enable
it on the DDR3 as well.
Gateworks uses Micron memory as well as Winbond in MX6. We have found in
Hi Tim,
On Tue, May 19, 2015 at 10:26 AM, Tim Harvey thar...@gateworks.com wrote:
Fabio,
I will be posting a README in the next day or so to document Falcon
mode usage on the Gateworks Ventana boards. In general the
documentation will be the same for any board using it but I'll provide
On Tue, 2015-05-19 at 14:56 +0200, Hans de Goede wrote:
diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun4i.c
b/arch/arm/cpu/armv7/sunxi/dram_sun4i.c
index c736fa3..f7b4915 100644
--- a/arch/arm/cpu/armv7/sunxi/dram_sun4i.c
+++ b/arch/arm/cpu/armv7/sunxi/dram_sun4i.c
@@ -508,7 +508,7 @@ static
On 15/05/2015 18:18, Tim Harvey wrote:
We need to do any PMIC setup in the SPL if we are to bypass U-Boot for
falcon mode.
Signed-off-by: Tim Harvey thar...@gateworks.com
---
v2: rebased
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
On 15/05/2015 18:17, Tim Harvey wrote:
Use the SZ_1M and SZ_1K macros from linuz/sizes.h for improved readability
Signed-off-by: Tim Harvey thar...@gateworks.com
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
On 15/05/2015 18:14, Tim Harvey wrote:
Switch to MMC RAW support for SPL. We will place the uboot.img at 69KB.
Signed-off-by: Tim Harvey thar...@gateworks.com
---
v2: remove unnecessary CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR define
Signed-off-by: Tim Harvey thar...@gateworks.com
---
On 18/05/2015 07:37, Peng Fan wrote:
Change PUZE_100_SW1ABCONF to PFUZE100_SW1ABCONF
Signed-off-by: Peng Fan peng@freescale.com
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=
DENX Software
On Tue, 19 May 2015 14:56:39 +0200
Hans de Goede hdego...@redhat.com wrote:
Make DRAM_ODT_EN Kconfig setting a bool, add a separate DRAM_ODT_CORRECTION
setting for A23 SoCs and use DRAM_ODT_EN Kconfig everywhere instead of
only in dram_sun4i.c and hardcoding odt_en elsewhere.
Note this
On Fri, May 15, 2015 at 6:01 AM, Masahiro Yamada
yamada.masah...@socionext.com wrote:
When we send patches, we are supposed to test them by build utilities
such as MAKEALL, buildman. When we want to test global changes, the
first hurdle is, I think, to collect toolchains for all the
On Tue, 19 May 2015 15:13:18 +0100
Ian Campbell ijc+ub...@hellion.org.uk wrote:
On Tue, 2015-05-19 at 14:56 +0200, Hans de Goede wrote:
diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun4i.c
b/arch/arm/cpu/armv7/sunxi/dram_sun4i.c
index c736fa3..f7b4915 100644
---
Hi Masahiro-san
On Thu, May 14, 2015 at 11:44 PM, Masahiro Yamada
yamada.masah...@socionext.com wrote:
This tool was originally written for my local use to ease the task
of tons of CONFIG moves, but there have been some requests for
mainlining it.
So, I have tidied up the code with nicer
On Mon, May 18, 2015 at 8:41 PM, Masahiro Yamada
yamada.masah...@socionext.com wrote:
Hi Joe,
2015-05-16 6:40 GMT+09:00 Joe Hershberger joe.hershber...@ni.com:
Some config.h files live in arch and board directories. They will need
to be cleaned up as well, so run the same filters there.
Hi Masahiro-san,
On Mon, May 18, 2015 at 9:10 PM, Masahiro Yamada
yamada.masah...@socionext.com wrote:
Hi Joe
2015-05-16 6:40 GMT+09:00 Joe Hershberger joe.hershber...@ni.com:
This print seems to be redundant and unformatted compared to the next
few lines, so remove it.
Signed-off-by: Joe
Hi Masahiro-san,
On Mon, May 18, 2015 at 9:03 PM, Masahiro Yamada
yamada.masah...@socionext.com wrote:
Hi Joe,
2015-05-16 6:40 GMT+09:00 Joe Hershberger joe.hershber...@ni.com:
In some case you may want to only cleanup the headers. Make it possible
without waiting for all boards to compile.
Hi Masahiro-san,
On Mon, May 18, 2015 at 8:58 PM, Masahiro Yamada
yamada.masah...@socionext.com wrote:
Hi Joe,
2015-05-16 6:40 GMT+09:00 Joe Hershberger joe.hershber...@ni.com:
This will ensure that the order of the defconfig entries will always
match that of the Kconfig files. After one
Hi Simon,
About: https://patchwork.ozlabs.org/patch/455720/
AFAIK on the kernel side all the relevant patches (including
devicetree binding documentation binding) have been queued
up for 4.2, so this ready to be merged now.
Paul, can you confirm this ?
Regards,
Hans
Any new of this ? it can be merged ?
I have tested and successfully boot a fedora on a Wandboard Quad with this.
The improvement of the console variable management can be done with an
other patch ?
Thank you for working on this.
--
XoD
2015-03-29 15:05 GMT+02:00 Tom Rini tr...@konsulko.com:
Hi,
Thanks for these 2 fixes, I've added both to my personal tree. I'll send
a pull-req to get these into u-boot/master soon.
Regards,
Hans
On 05/16/2015 07:52 PM, Paul Kocialkowski wrote:
sunxi_usbc_vbus_detect was renamed to sunxi_usb_phy_vbus_detect but
g_dnl_board_usb_cable_connected
remove unnecessary clearing of SWSM.SWSM_SMBI when obtaining the SW
semaphore. This was introduced in 951860634fdb557bbb58e0f99215391bc0c29779
while adding i210 support and should be now resolved by releasing the
semaphore when no longer needed.
Cc: Marcel Ziswiler mar...@ziswiler.com
Cc: Marek
Hi,
On 05/19/2015 04:13 PM, Ian Campbell wrote:
On Tue, 2015-05-19 at 14:56 +0200, Hans de Goede wrote:
diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun4i.c
b/arch/arm/cpu/armv7/sunxi/dram_sun4i.c
index c736fa3..f7b4915 100644
--- a/arch/arm/cpu/armv7/sunxi/dram_sun4i.c
+++
Hi,
On 05/19/2015 04:54 PM, Siarhei Siamashka wrote:
On Tue, 19 May 2015 14:56:39 +0200
Hans de Goede hdego...@redhat.com wrote:
Make DRAM_ODT_EN Kconfig setting a bool, add a separate DRAM_ODT_CORRECTION
setting for A23 SoCs and use DRAM_ODT_EN Kconfig everywhere instead of
only in
Le mardi 19 mai 2015 à 18:37 +0200, Hans de Goede a écrit :
Hi Simon,
About: https://patchwork.ozlabs.org/patch/455720/
AFAIK on the kernel side all the relevant patches (including
devicetree binding documentation binding) have been queued
up for 4.2, so this ready to be merged now.
Once the hwsw semaphore is acquired, it must be released when access to the
hw is completed. Without this subsequent calls to acquire will timeout
obtaining the semaphore.
Cc: Marcel Ziswiler mar...@ziswiler.com
Cc: Marek Vasut ma...@denx.de
Cc: Aneesh Bansal aneesh.ban...@freescale.com
Cc:
This reverts commit 17da7120249bfdef877f46be5bbcb3cc01212eb9.
The i210/i211 do have the SW_FW_SYNC (0x5b5c) register and this is what should
be used when acquiring the semaphore.
I believe the issue that this patch was trying to resolve is now resolved
by properly releasing the semaphore once no
The following patchset resolves semaphore sync issues I've encountered on
a board with an i210 (programmed, copper mode) using the internal phy.
The first patch adds releasing of the semaphore once they are no longer needed,
and the other two patches revert logic that I believe was working around
Hi Paul,
On 19 May 2015 at 10:57, Paul Kocialkowski cont...@paulk.fr wrote:
Le mardi 19 mai 2015 à 18:37 +0200, Hans de Goede a écrit :
Hi Simon,
About: https://patchwork.ozlabs.org/patch/455720/
AFAIK on the kernel side all the relevant patches (including
devicetree binding documentation
This will ensure that the order of the defconfig entries will always
match that of the Kconfig files. After one slightly painful (but
still early in the process) pass over all boards, this should keep
the defconfigs clean from here on.
Users must edit the Kconfig first to add the menu entries and
Some config.h files live in arch and board directories. They will need
to be cleaned up as well, so run the same filters there.
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
---
Changes in v5:
-Consolidate code to clean up dirs
Changes in v4:
-New for version 4
Changes in v3: None
When moving configs, it is important to know what was defined in the
config header even if it duplicates the configs coming from Kconfig.
This is specifically needed for the case where a config is set to
default 'y' in the Kconfig. This would previously cause the actual value
from the include
A common case for failed builds is a missing compiler. Print a message
for that case to tell the user concisely which compiler was expected
that was not found.
This patch also has the effect of not printing build errors any longer.
The next patch will add a switch to optionally bring that back.
If boards fail, output that list to a file so that it can easily be
passed back into moveconfig.py using the -d option.
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
---
Changes in v5:
-Changed file handling to use with/as
Changes in v4: None
Changes in v3: None
Changes in v2: None
In some cases the build for the autoconf breaks. This outputs the errors
following the status so that action can be taken without building again
manually.
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
---
Changes in v5:
-Remove redundant destination
Changes in v4: None
Changes in v3:
This gives a basic idea about progress.
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
---
Changes in v5: None
Changes in v4: None
Changes in v3:
-New for version 3
Changes in v2: None
tools/moveconfig.py | 16 +++-
1 file changed, 11 insertions(+), 5 deletions(-)
diff
In some case you may want to only cleanup the headers. Make it possible
without waiting for all boards to compile.
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
---
Changes in v5:
-Move check_top_directory to main
Changes in v4: None
Changes in v3:
-New for version 3
Changes in v2:
This is helpful to re-attempt to move failed boards from a previous run
without starting over.
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
---
Changes in v5:
-Remove default 'r' mode on open
Changes in v4: None
Changes in v3:
-Fixed command line options order (alphabetize)
Changes
On Tue, 2015-05-19 at 18:39 +0200, Hans de Goede wrote:
Hi,
On 05/19/2015 04:13 PM, Ian Campbell wrote:
On Tue, 2015-05-19 at 14:56 +0200, Hans de Goede wrote:
diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun4i.c
b/arch/arm/cpu/armv7/sunxi/dram_sun4i.c
index c736fa3..f7b4915 100644
Hi Tom,
This contains a few bug fixes and features from earlier in the merge window.
The following changes since commit 0e6b7a28243175ae0874d53b6e6e4eff8548d71f:
Merge git://git.denx.de/u-boot-samsung (2015-05-18 09:15:15 -0400)
are available in the git repository at:
On 05/18/2015 03:33 PM, Simon Glass wrote:
Hi Stephen,
On 15 May 2015 at 09:34, Stephen Warren swar...@wwwdotorg.org wrote:
On 05/13/2015 07:56 AM, Simon Glass wrote:
Hi Stephen,
On 25 February 2015 at 16:31, Stephen Warren swar...@wwwdotorg.org
wrote:
On 02/17/2015 03:29 PM, Simon Glass
Hi Masahiro,
On 18 May 2015 at 23:04, Masahiro Yamada yamada.masah...@socionext.com wrote:
Hi Simon,
2015-05-18 2:50 GMT+09:00 Simon Glass s...@chromium.org:
Hi Masahiro,
On 15 May 2015 at 22:58, Masahiro Yamada yamada.masah...@socionext.com
wrote:
Hi Joe,
(added Simon)
2015-05-16
Hi Tom,
On Thu, May 7, 2015 at 4:48 AM, Joe Hershberger joe.hershber...@ni.com wrote:
This includes moving CONFIG_REGEX to Kconfig and adding support for
regex to the env_attr lists (when CONFIG_REGEX is enabled).
This allows ethaddrs to all be checked for access and format by default.
Also
The usb-kbd key repeat code assumes that reports get repeated every 40 ms,
this is never true when using CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP, and
does not always works for CONFIG_SYS_USB_EVENT_POLL and
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE since not all usb keyboards honor
the
Hi Joe,
On 19 May 2015 at 13:23, Joe Hershberger joe.hershber...@gmail.com wrote:
Hi Simon,
On Tue, May 19, 2015 at 2:21 PM, Joe Hershberger
joe.hershber...@gmail.com wrote:
Hi Simon,
On Fri, May 15, 2015 at 8:56 AM, Simon Glass s...@chromium.org wrote:
On 13 May 2015 at 05:38,
On 05/19/2015 12:01 PM, Simon Glass wrote:
Hi Stephen,
On 19 May 2015 at 09:41, Stephen Warren swar...@wwwdotorg.org wrote:
On 05/18/2015 03:33 PM, Simon Glass wrote:
Hi Stephen,
On 15 May 2015 at 09:34, Stephen Warren swar...@wwwdotorg.org wrote:
On 05/13/2015 07:56 AM, Simon Glass
Hi Heiko,
I have tested this sf-mtd stuff, please see below and enabled prints
in all the func calls.
zynq-uboot mtdparts add nor0 0x1@0x0 env
mtdparts variable not set, see 'help mtdparts'
zynq-uboot mtdparts
device nor0 zynq-sf.0, # parts = 1
#: namesizeoffset
Hi Ian,
On 01/17/2015 11:44 PM, Ian Campbell wrote:
On Thu, 2015-01-15 at 15:52 +0100, Hans de Goede wrote:
The DRAM Base differs between sun9i and the others and we cannot use
math in various places like the environment setting and linker scripts,
so simply define everything which contains
Hi Tom,
Please pull u-boot-sunxi/master into master for various small bugfixes,
improvements and one new board.
The following changes since commit 0e6b7a28243175ae0874d53b6e6e4eff8548d71f:
Merge git://git.denx.de/u-boot-samsung (2015-05-18 09:15:15 -0400)
are available in the git repository
On 2015-05-19, XoD wrote:
Any new of this ? it can be merged ?
I think my submitted patch was a bit too invasive by removing most of
the environment, and have reworked the patch to leave much of the
environment:
On Mon, 2015-05-18 at 19:16 -0700, Andrei Yakimov wrote:
This is my best try. I have test it with my old u-boot,
but not with master. Do not have a bench for it.
A bench?
This is not very important patch. I do not find
any other ONFI user in u-boot.
Andrei
From
Hi Masahiro-san,
On Mon, May 18, 2015 at 10:12 PM, Masahiro Yamada
yamada.masah...@socionext.com wrote:
2015-05-16 6:40 GMT+09:00 Joe Hershberger joe.hershber...@ni.com:
If boards fail, output that list to a file so that it can easily be
passed back into moveconfig.py using the -d option.
On Tue, May 19, 2015 at 12:48:19PM +0200, Marek Vasut wrote:
The following changes since commit 0e6b7a28243175ae0874d53b6e6e4eff8548d71f:
Merge git://git.denx.de/u-boot-samsung (2015-05-18 09:15:15 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-usb.git HEAD
Hi Stephen,
On 19 May 2015 at 09:41, Stephen Warren swar...@wwwdotorg.org wrote:
On 05/18/2015 03:33 PM, Simon Glass wrote:
Hi Stephen,
On 15 May 2015 at 09:34, Stephen Warren swar...@wwwdotorg.org wrote:
On 05/13/2015 07:56 AM, Simon Glass wrote:
Hi Stephen,
On 25 February 2015 at
Hi,
On 05/19/2015 06:57 PM, Paul Kocialkowski wrote:
Le mardi 19 mai 2015 à 18:37 +0200, Hans de Goede a écrit :
Hi Simon,
About: https://patchwork.ozlabs.org/patch/455720/
AFAIK on the kernel side all the relevant patches (including
devicetree binding documentation binding) have been queued
Hi Joe,
On 19 May 2015 at 12:13, Joe Hershberger joe.hershber...@gmail.com wrote:
Hi Simon,
On Tue, May 19, 2015 at 12:16 PM, Simon Glass s...@chromium.org wrote:
Hi Masahiro,
On 18 May 2015 at 23:04, Masahiro Yamada yamada.masah...@socionext.com
wrote:
Hi Simon,
2015-05-18
Hi Masahiro-san,
On Mon, May 18, 2015 at 10:23 PM, Masahiro Yamada
yamada.masah...@socionext.com wrote:
2015-05-16 6:40 GMT+09:00 Joe Hershberger joe.hershber...@ni.com:
A common case for failed builds is a missing compiler. Print a message
for that case to tell the user concisely which
Hi Masahiro-san,
On Mon, May 18, 2015 at 10:25 PM, Masahiro Yamada
yamada.masah...@socionext.com wrote:
2015-05-16 6:40 GMT+09:00 Joe Hershberger joe.hershber...@ni.com:
In some cases the build for the autoconf breaks. This outputs the errors
following the status so that action can be taken
On Wednesday, May 13, 2015 at 02:47:51 PM, Hans de Goede wrote:
The usb-kbd key repeat code assumes that reports get repeated every 40 ms,
this is never true when using CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP, and
does not always works for CONFIG_SYS_USB_EVENT_POLL and
Updated PR, dropped the patch from Hans and picked the OHCI cache
patch instead:
The following changes since commit 0e6b7a28243175ae0874d53b6e6e4eff8548d71f:
Merge git://git.denx.de/u-boot-samsung (2015-05-18 09:15:15 -0400)
are available in the git repository at:
On Tuesday, May 19, 2015 at 12:44:24 PM, Josh Wu wrote:
Remove the CONFIG_DM_USB limitation to enable cache support functions.
Tested on SAMA5D3x-EK board.
Signed-off-by: Josh Wu josh...@atmel.com
Applied, thanks!
Best regards,
Marek Vasut
___
Hi Masahiro-san,
On Mon, May 18, 2015 at 11:33 PM, Masahiro Yamada
yamada.masah...@socionext.com wrote:
2015-05-16 6:40 GMT+09:00 Joe Hershberger joe.hershber...@ni.com:
This is helpful to re-attempt to move failed boards from a previous run
without starting over.
Signed-off-by: Joe
Hi Masahiro-san,
On Mon, May 18, 2015 at 8:58 PM, Masahiro Yamada
yamada.masah...@socionext.com wrote:
Hi Joe,
2015-05-16 6:40 GMT+09:00 Joe Hershberger joe.hershber...@ni.com:
This will ensure that the order of the defconfig entries will always
match that of the Kconfig files. After one
Hi Simon,
On Tue, May 19, 2015 at 12:16 PM, Simon Glass s...@chromium.org wrote:
Hi Masahiro,
On 18 May 2015 at 23:04, Masahiro Yamada yamada.masah...@socionext.com
wrote:
Hi Simon,
2015-05-18 2:50 GMT+09:00 Simon Glass s...@chromium.org:
Hi Masahiro,
On 15 May 2015 at 22:58, Masahiro
Hi Simon,
On Fri, May 15, 2015 at 8:56 AM, Simon Glass s...@chromium.org wrote:
On 13 May 2015 at 05:38, Przemyslaw Marczak p.marc...@samsung.com wrote:
The file test.dts from driver model test directory,
was compiled by call dtc in script: test/dm/test-dm.sh.
This doesn't allow for
Hi Simon,
On Tue, May 19, 2015 at 2:21 PM, Joe Hershberger
joe.hershber...@gmail.com wrote:
Hi Simon,
On Fri, May 15, 2015 at 8:56 AM, Simon Glass s...@chromium.org wrote:
On 13 May 2015 at 05:38, Przemyslaw Marczak p.marc...@samsung.com wrote:
The file test.dts from driver model test
97 matches
Mail list logo