On Tue, May 03, 2016 at 01:37:41PM -0500, Derald Woods wrote:
> On Sun, May 1, 2016 at 12:09 PM, Derald D. Woods
> wrote:
>
> > On 05/01/2016 08:58 AM, Tom Rini wrote:
> >
> >> On Sat, Apr 30, 2016 at 07:12:28PM -0500, Derald D. Woods wrote:
> >>
> >>> On 04/28/2016
Hi Mugunthan,
https://patchwork.ozlabs.org/patch/616102/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Stefan,
https://patchwork.ozlabs.org/patch/610318/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Mugunthan,
https://patchwork.ozlabs.org/patch/616104/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Mugunthan,
https://patchwork.ozlabs.org/patch/616103/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Mugunthan,
https://patchwork.ozlabs.org/patch/616105/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Mugunthan,
https://patchwork.ozlabs.org/patch/616106/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On Tue, May 3, 2016 at 1:39 AM, Simon Glass wrote:
> Flushing part of the cache should be done on cache boundaries. Trying to
> flush part of a cache line is not supported and the request may be ignored
> or print warnings.
>
> Adjust the bootm code to align the end address to
On Tue, May 3, 2016 at 1:40 AM, Simon Glass wrote:
> The end address of the cache flush must be cache-line-aligned since
> otherwise (at least on ARM926-EJS) the request is ignored. When the cache
> is enabled this means that packets are not sent.
>
> Signed-off-by: Simon Glass
Hi Lev,
https://patchwork.ozlabs.org/patch/564594/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Kevin,
https://patchwork.ozlabs.org/patch/604277/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Prabhakar,
https://patchwork.ozlabs.org/patch/602416/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Kevin,
https://patchwork.ozlabs.org/patch/604278/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi,
this stuff is for 2016.05, it's a bunch of fixes.
The following changes since commit e7fbcbc2566ab4bbcb07889a5791972ac49fa407:
igep00x0: Use the SRAM available for SPL. (2016-05-03 12:17:13 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-usb.git master
for you
On Tue, May 03, 2016 at 06:17:08AM -0400, Robert P. J. Day wrote:
> as i dig through the u-boot code, i frequently run across spelling
> mistakes and other apparently non-functional issues, but i don't want
> to pollute the list with patch after patch of trivial fixups, so i
> started a local
Hi Mugunthan,
https://patchwork.ozlabs.org/patch/616100/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Mugunthan,
https://patchwork.ozlabs.org/patch/616101/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On Tue, May 3, 2016 at 1:39 AM, Simon Glass wrote:
> Avoid generating this section if there is nothing in it.
>
> Signed-off-by: Simon Glass
Acked-by: Joe Hershberger
___
U-Boot mailing
On Tue, May 3, 2016 at 1:39 AM, Simon Glass wrote:
> At present CONFIG_SKIP_LOWLEVEL_INIT prevents U-Boot from calling
> lowlevel_init(). This means that the instruction cache is not enabled and
> the board runs very slowly.
>
> What is really needed in many cases is to skip
On Tue, May 3, 2016 at 1:39 AM, Simon Glass wrote:
> Adjust this driver to avoid using struct netdev in functions that driver
> model will call. Also refactor the receive function to be compatible with
> driver model.
>
> Signed-off-by: Simon Glass
Hi Lev,
On Mon, May 2, 2016 at 11:01 AM, Lev Iserovich
wrote:
> Hi,
>
> Updated with C-style comments:
>
> For multiple ethernet interfaces the FDT offset of '/aliases' will change as
> we
> are adding MAC addresses to the FDT.
> Therefore only the first
On Sun, May 1, 2016 at 12:09 PM, Derald D. Woods
wrote:
> On 05/01/2016 08:58 AM, Tom Rini wrote:
>
>> On Sat, Apr 30, 2016 at 07:12:28PM -0500, Derald D. Woods wrote:
>>
>>> On 04/28/2016 06:34 PM, Tom Rini wrote:
>>>
On Thu, Apr 28, 2016 at 05:55:17PM -0500,
Hi Dan,
https://patchwork.ozlabs.org/patch/617696/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Mugunthan,
https://patchwork.ozlabs.org/patch/616109/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Dan,
https://patchwork.ozlabs.org/patch/617691/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Dan,
https://patchwork.ozlabs.org/patch/617692/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Mugunthan,
https://patchwork.ozlabs.org/patch/616108/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Mugunthan,
https://patchwork.ozlabs.org/patch/616107/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Dan,
https://patchwork.ozlabs.org/patch/617693/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Stefan,
https://patchwork.ozlabs.org/patch/610319/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Mugunthan,
https://patchwork.ozlabs.org/patch/616098/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Mugunthan,
https://patchwork.ozlabs.org/patch/616099/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Tom,
I left out my semantic patch changes for now since spatch does not generate
well-formatted multi-line function definitions. I'm looking into improving the
tool, but ocaml is not a language that I'm familiar with.
The following changes since commit
Hi Dan,
https://patchwork.ozlabs.org/patch/617695/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Dan,
https://patchwork.ozlabs.org/patch/617699/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Dan,
https://patchwork.ozlabs.org/patch/617694/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On 2.5.2016 18:27, Stephen Warren wrote:
> On 05/02/2016 06:29 AM, Michal Simek wrote:
>> Slow network or big image filesize is not able to be finished
>> in 30s. Add option to user to extend timeout(in miliseconds).
>>
>> env__net_tftp_readable_file = {
>> "fn":
This should return a non-zero value if there is a missing property. Update
the return value accordingly. The only expected error is -FDT_ERR_NOTFOUND.
Signed-off-by: Simon Glass
---
lib/fdtdec.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/lib/fdtdec.c
On Mon, 2016-05-02 at 12:22 -0700, Thomas Hoff wrote:
> Thanks Simon!
>
> Hey Sjoerd,
>
> Were you able to chainboot u-boot for your acer cb5?
Yes, that's what the Nyan big in kernelci does constantly :).
The trick is using the description from the mail Simon linked to, but
making sure the
Adjust the driver to use struct display_timing for its display timing.
This is what is used by driver-model and allows the LCD init code to be
common.
Signed-off-by: Simon Glass
---
drivers/video/atmel_lcdfb.c | 106 +---
1 file
Add this file from Linux v4.5.
Signed-off-by: Simon Glass
---
arch/arm/dts/Makefile |1 +
arch/arm/dts/at91sam9g45.dtsi | 1335
include/dt-bindings/clock/at91.h | 23 +
include/dt-bindings/dma/at91.h | 52
The end address of the cache flush must be cache-line-aligned since
otherwise (at least on ARM926-EJS) the request is ignored. When the cache
is enabled this means that packets are not sent.
Signed-off-by: Simon Glass
---
drivers/net/macb.c | 2 +-
1 file changed, 1
Add driver-model support to this driver. The old code remains for now so
that we can convert boards one at a time.
Signed-off-by: Simon Glass
---
drivers/net/macb.c | 119 +
1 file changed, 119 insertions(+)
diff --git
Adjust this driver to avoid using struct netdev in functions that driver
model will call. Also refactor the receive function to be compatible with
driver model.
Signed-off-by: Simon Glass
---
drivers/net/macb.c | 199 +
1
This uses the wrote base register value. Fix it.
Signed-off-by: Simon Glass
---
drivers/mtd/nand/atmel_nand.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 7cc1de0..4e278fa 100644
At present CONFIG_SKIP_LOWLEVEL_INIT prevents U-Boot from calling
lowlevel_init(). This means that the instruction cache is not enabled and
the board runs very slowly.
What is really needed in many cases is to skip the call to lowlevel_init()
but still perform CP15 init. Add an option to handle
This needs to be set to avoid a fatal error when ECC is used.
Signed-off-by: Simon Glass
---
drivers/mtd/nand/atmel_nand.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 4e278fa..8fac824 100644
---
From: Enric Balletbo i Serra
Move CONFIG_SPL_TEXT_BASE down to 0x4020 and set CONFIG_SPL_MAX_SIZE
to (SRAM_SCRATCH_SPACE_ADDR - CONFIG_SPL_TEXT_BASE), so that it's clear
what the limit is.
This will also help some compilers to fit all the code into the
Add these definitions so that GPIOs can be used with driver model.
Signed-off-by: Simon Glass
---
arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c | 18 ++
1 file changed, 18 insertions(+)
diff --git
Add driver-model support to this driver. Most features can be controlled
from the device tree.
Signed-off-by: Simon Glass
---
drivers/video/atmel_lcdfb.c | 91 +
include/atmel_lcd.h | 9 +
2 files changed, 100
This empty line should not be there. Remove it.
Signed-off-by: Simon Glass
---
drivers/mtd/nand/nand_base.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 9e8fc1f..bcd4d70 100644
---
The code does not compile if ECC is enabled.
Signed-off-by: Simon Glass
---
drivers/mtd/nand/atmel_nand.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 8fac824..15958cb 100644
---
Add register definitions for the AT91 RTC so that this can potentially be
used in U-Boot.
Signed-off-by: Simon Glass
---
arch/arm/mach-at91/include/mach/at91_rtc.h | 71 ++
1 file changed, 71 insertions(+)
create mode 100644
This is available on AT91SAM9G45. Add the peripheral address and flag
definitions.
Signed-off-by: Simon Glass
---
arch/arm/mach-at91/include/mach/at91_sck.h| 21 +
arch/arm/mach-at91/include/mach/at91sam9g45.h | 1 +
2 files changed, 22 insertions(+)
Flushing part of the cache should be done on cache boundaries. Trying to
flush part of a cache line is not supported and the request may be ignored
or print warnings.
Adjust the bootm code to align the end address to prevent this problem.
Signed-off-by: Simon Glass
---
Avoid generating this section if there is nothing in it.
Signed-off-by: Simon Glass
---
net/bootp.c | 9 +
1 file changed, 9 insertions(+)
diff --git a/net/bootp.c b/net/bootp.c
index d7852db..71f09bd 100644
--- a/net/bootp.c
+++ b/net/bootp.c
@@ -655,6 +655,15 @@
> Am 03.05.2016 um 01:11 schrieb Peter Robinson :
>
>> On Mon, May 2, 2016 at 10:43 PM, Alexander Graf wrote:
>> We can now successfully boot EFI applications from disk, but users
>> may want to also run them from a PXE setup.
>>
>> This patch implements
On Mon, Apr 18, 2016 at 06:30:41PM +0200, Marek Vasut wrote:
> Enable the fitImage support for the entire SAMA5Dx lineup of CPUs.
> The fitImage is superior image format to uImage and it is useful
> to have it available.
>
> Signed-off-by: Marek Vasut
> Cc: Andreas Bießmann
Dear Wenyou,
On 2016-04-07 04:16, Wenyou Yang wrote:
Bring in required device tree files from Linux.
Signed-off-by: Wenyou Yang
There is a small typo below ...
---
arch/arm/dts/sama5d2-pinfunc.h | 880
+
Hello Simon,
Am 03.05.2016 um 08:40 schrieb Simon Glass:
Add register definitions for the AT91 RTC so that this can potentially be
used in U-Boot.
Signed-off-by: Simon Glass
---
arch/arm/mach-at91/include/mach/at91_rtc.h | 71 ++
1 file
On Mon, Apr 11, 2016 at 04:41:33PM +0800, Wenyou Yang wrote:
> Change the clock source of the SDHCI's generated clock from PLLA to
> UPLL clock to align to Linux driver.
>
> Signed-off-by: Wenyou Yang
Reviewed-by: Andreas Bießmann
> ---
>
>
On Fri, Apr 22, 2016 at 09:56:21PM +0200, Marek Vasut wrote:
> Implement support for saving ARM register R4 early during boot using
> save_boot_params . Implement support for decoding the stored register
> R4 value in spl_boot_device() to obtain boot device from which the
> SoC booted. This way,
On Mon, Apr 11, 2016 at 04:41:31PM +0800, Wenyou Yang wrote:
> Before enabling a generated clock whose source is from the UPLL
> clock, check and enable the UPLL clock.
>
> Signed-off-by: Wenyou Yang
Reviewed-by: Andreas Bießmann
> ---
>
>
On Mon, Apr 11, 2016 at 04:41:32PM +0800, Wenyou Yang wrote:
> Add the UPLL clock and master clock as a clock source for getting
> the generated clock frequency to complete its clock sources support.
>
> Signed-off-by: Wenyou Yang
Reviewed-by: Andreas Bießmann
This provides a way to load a FIT containing U-Boot and a selection of device
tree files from a File system. Making sure that all the reads and writes
are aligned to their respective needs.
Signed-off-by: Lokesh Vutla
---
- Assuming info->priv is used for passing filename for
On Monday 02 May 2016 01:27 PM, Michal Simek wrote:
> On 2.5.2016 06:06, Lokesh Vutla wrote:
>> Hi Michal,
>>
>> On Thursday 28 April 2016 03:01 PM, Michal Simek wrote:
>>> Support U-Boot SPL to load FIT image from fat partition.
>>> Fit image can be setup via CONFIG_SPL_FS_LOAD_KERNEL_NAME.
>>>
Hi Scott,
On Tue, 03 May 2016 00:06:45 -0500
Scott Wood wrote:
> On Mon, 2016-04-25 at 22:53 +0200, Boris Brezillon wrote:
> > On Mon, 25 Apr 2016 13:36:46 -0400
> > Tom Rini wrote:
> >
> > > On Mon, Apr 25, 2016 at 04:43:14PM +0200, Boris Brezillon
Hello Simon,
Am 03.05.2016 um 08:40 schrieb Simon Glass:
The end address of the cache flush must be cache-line-aligned since
otherwise (at least on ARM926-EJS) the request is ignored. When the cache
is enabled this means that packets are not sent.
Signed-off-by: Simon Glass
Hello Simon,
Am 03.05.2016 um 08:39 schrieb Simon Glass:
This is available on AT91SAM9G45. Add the peripheral address and flag
definitions.
Signed-off-by: Simon Glass
---
arch/arm/mach-at91/include/mach/at91_sck.h| 21 +
On Fri, Feb 26, 2016 at 05:20:25PM +0800, Wenyou Yang wrote:
> They will be used on SAMA5D2 PTC board.
>
> Signed-off-by: Wenyou Yang
Reviewed-by: Andreas Bießmann
> ---
>
> arch/arm/mach-at91/include/mach/sama5_sfr.h | 24
On Mon, Apr 11, 2016 at 02:07:17PM +0800, Wenyou Yang wrote:
> Fix the missing pin config of the SDMMC0 interface.
>
> Signed-off-by: Wenyou Yang
Reviewed-by: Andreas Bießmann
> ---
>
> board/atmel/sama5d2_xplained/sama5d2_xplained.c | 1 +
> 1
Some devices like MMC, USB can be formatted to a FS and can act as a boot media.
Given that FIT image load support in SPL support only raw devices, SPL should
also be able to support loading FIT image from a File system.
This series add support to load FIT image from a filesystem and also adding
sectors field is not being updated when reading fdt from fit image. Because of
this size_of(u-boot.bin) is being read when reading fdt. Fixing it by updating
the sectors field properly.
Signed-off-by: Lokesh Vutla
---
common/spl/spl_fit.c | 1 +
1 file changed, 1
Detect a FIT when loading from a FAT File system and handle it using the
new FIT SPL support.
Signed-off-by: Lokesh Vutla
---
common/spl/spl_fat.c | 31 +--
1 file changed, 29 insertions(+), 2 deletions(-)
diff --git a/common/spl/spl_fat.c
as i dig through the u-boot code, i frequently run across spelling
mistakes and other apparently non-functional issues, but i don't want
to pollute the list with patch after patch of trivial fixups, so i
started a local git branch called "typos" to which i add these things
and, eventually, i'll
Hello Simon,
Am 03.05.2016 um 08:39 schrieb Simon Glass:
Flushing part of the cache should be done on cache boundaries. Trying to
flush part of a cache line is not supported and the request may be ignored
or print warnings.
Adjust the bootm code to align the end address to prevent this
Hello Simon,
Am 03.05.2016 um 08:39 schrieb Simon Glass:
Adjust this driver to avoid using struct netdev in functions that driver
model will call. Also refactor the receive function to be compatible with
driver model.
Signed-off-by: Simon Glass
---
drivers/net/macb.c |
Hello Simon,
Am 03.05.2016 um 08:40 schrieb Simon Glass:
Add this file from Linux v4.5.
Signed-off-by: Simon Glass
---
arch/arm/dts/Makefile |1 +
arch/arm/dts/at91sam9g45.dtsi | 1335
On Fri, Feb 26, 2016 at 05:20:26PM +0800, Wenyou Yang wrote:
> The board supports following features:
> - Boot media support: NAND Flash/SPI Flash
> - Support ethernet
> - Support USB mass storage
>
> Signed-off-by: Wenyou Yang
Reviewed-by: Andreas Bießmann
Hello Simon,
Am 03.05.2016 um 08:39 schrieb Simon Glass:
At present CONFIG_SKIP_LOWLEVEL_INIT prevents U-Boot from calling
lowlevel_init(). This means that the instruction cache is not enabled and
the board runs very slowly.
What is really needed in many cases is to skip the call to
Hello Simon,
Am 03.05.2016 um 08:40 schrieb Simon Glass:
Add these definitions so that GPIOs can be used with driver model.
Signed-off-by: Simon Glass
---
arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c | 18 ++
1 file changed, 18 insertions(+)
On Tue, May 03, 2016 at 03:01:10PM -0500, Joe Hershberger wrote:
> Hi Tom,
>
> I left out my semantic patch changes for now since spatch does not generate
> well-formatted multi-line function definitions. I'm looking into improving the
> tool, but ocaml is not a language that I'm familiar with.
On Tue, May 3, 2016 at 4:34 PM, Tom Rini wrote:
> On Tue, May 03, 2016 at 03:01:10PM -0500, Joe Hershberger wrote:
>
>> Hi Tom,
>>
>> I left out my semantic patch changes for now since spatch does not generate
>> well-formatted multi-line function definitions. I'm looking into
Increase the query delay, otherwise some sticks are not detected.
The problem shows up on the USB bus analyzer such that the stick
takes longer time to switch from FS mode to HS mode than the code
allows.
Signed-off-by: Marek Vasut
Cc: Chin Liang See
Cc: Dinh
The pointer should always be inited to NULL, not zero (0). These are
two different things and not necessarily equal.
Signed-off-by: Marek Vasut
Cc: Chin Liang See
Cc: Dinh Nguyen
Cc: Hans de Goede
Cc: Stefan
The code shouldn't continue probing the port if get_port_status() failed.
Signed-off-by: Marek Vasut
Cc: Chin Liang See
Cc: Dinh Nguyen
Cc: Hans de Goede
Cc: Stefan Roese
Cc: Stephen Warren
Abort the request in case any of the tokens in the packet failed to
complete transfer 10 times. This is a precaution needed so that we
don't end in endless loop when scanning the bus with some braindead
devices.
Signed-off-by: Marek Vasut
Cc: Chin Liang See
Cc:
Hi Simon,
On Sun, May 1, 2016 at 2:55 PM, Simon Glass wrote:
> Some build systems want to be quiet unless there is a problem. At present
> mkimage displays quite a bit of information when generating a FIT file. Add
> a '-q' flag to silence this.
>
> Signed-off-by: Simon Glass
Hi Tom,
Here are the bug fixes for this release.
The following changes since commit e96e064f51139c4af39f14499564ef76e40bbc29:
usb: dwc2: Init desc_before_addr (2016-05-03 19:21:18 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-net.git master
for you to fetch
The USB function can respond to a Setup packet with ACK or, in
case it's busy, it can ignore the Setup packet. The USB function
usually gets busy if we hammer it with Control EP transfers too
much (ie. sending multiple Get Descriptor requests in a single
microframe tends to trigger it on certain
Some devices, like the SanDisk Cruzer Pop need some time to process
the Set Configuration request, so wait a little until they are ready.
Signed-off-by: Marek Vasut
Cc: Chin Liang See
Cc: Dinh Nguyen
Cc: Hans de Goede
The Kingston DT Ultimate USB 3.0 stick is sensitive to this first
Get Descriptor request and if the request is not in a separate
microframe, the stick refuses to operate. Add slight delay, which
is enough for one microframe to pass on any USB spec revision.
Signed-off-by: Marek Vasut
Hi Mugunthan,
On 3 May 2016 at 09:36, Mugunthan V N wrote:
>
> On Monday 02 May 2016 12:24 AM, Simon Glass wrote:
> > Hi Mugunthan,
> >
> > On 28 April 2016 at 04:06, Mugunthan V N wrote:
> >> Provide an api to check whether the given device or machine
On 04/15/2016 01:19 PM, Daniel Schwierzeck wrote:
>
>
> Am 12.04.2016 um 05:09 schrieb Wills Wang:
>>
>> These series of patch based on top of mips/next, it fix some defects on
>> the previous patch series "add support for atheros ath79 based SOCs".
>>
>>
>> Wills Wang (4):
>> ath79: spi:
On Tue, May 03, 2016 at 10:24:52AM +0800, Peng Fan wrote:
> When dfu_fill_entity fail, need to free dfu to avoid memory leak.
>
> Reported by Coverity:
> "
> Resource leak (RESOURCE_LEAK)
> leaked_storage: Variable dfu going out of scope leaks the storage
> it points to.
> "
>
> Signed-off-by:
On Tue, May 03, 2016 at 10:25:22AM +0800, Peng Fan wrote:
> Reported by Coverity:
> Logically dead code (DEADCODE)
> dead_error_line: Execution cannot reach this statement:
> (f_dfu->strings + --i).s =
>
> If calloc failed, i is still 0 and no need to call free,
> so discard the dead code.
On Tue, May 03, 2016 at 10:33:38AM +0800, Miao Yan wrote:
> Hi Tom,
>
> 2016-04-30 9:39 GMT+08:00 Tom Rini :
> > - Move the command portion of arch/x86/cpu/qemu/fw_cfg.c into
> > cmd/qemu_fw_cfg.c
> > - Move arch/x86/include/asm/fw_cfg.h to include/qemu_fw_cfg.h
> > - Rename
On Tue, May 03, 2016 at 08:04:31PM +0200, Marek Vasut wrote:
> Hi,
>
> this stuff is for 2016.05, it's a bunch of fixes.
>
> The following changes since commit e7fbcbc2566ab4bbcb07889a5791972ac49fa407:
>
> igep00x0: Use the SRAM available for SPL. (2016-05-03 12:17:13 -0400)
>
> are
On 05/03/2016 10:52 AM, Andreas Bießmann wrote:
> On Fri, Apr 22, 2016 at 09:56:21PM +0200, Marek Vasut wrote:
>> Implement support for saving ARM register R4 early during boot using
>> save_boot_params . Implement support for decoding the stored register
>> R4 value in spl_boot_device() to obtain
On Tue, May 03, 2016 at 01:35:07PM +0200, Andreas Bießmann wrote:
> Hi Tom,
>
> here are some fixes for sama5d2 and a new sama5d2 board for 2016.05.
>
> The following changes since commit 58abb988ce24525474f0d515d2a36c1b3acf893f:
>
> mx6ul_evk: Remove CONFIG_SUPPORT_EMMC_BOOT (2016-05-02
1 - 100 of 175 matches
Mail list logo