The purpose of patch set is to convert the board to support Device
Tree and Driver Model.
It is based on the patch set:
[PATCH v5 0/2] pinctrl: at91: Add pinctrl driver
http://lists.denx.de/pipermail/u-boot/2017-February/280463.html
Changes in v3:
- add the Reviewed-by tags.
- re
If enabled Driver Model for GPIO, CONFIG_AT91_GPIO should be defined
by configs/*_defconfig file.
Signed-off-by: Wenyou Yang
Reviewed-by: Andreas Bießmann
---
Changes in v3: None
Changes in v2: None
include/configs/at91-sama5_common.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/incl
Enable early debug UART to debug problems when an ICE or other
debug mechanism is not available.
Signed-off-by: Wenyou Yang
Reviewed-by: Andreas Bießmann
---
Changes in v3: None
Changes in v2: None
board/atmel/sama5d4_xplained/sama5d4_xplained.c | 15 ++-
configs/sama5d4_xplained_
Since the introduction of the pinctrl and clk driver and
the dts file, remove unneeded hard coded related code from
the board file.
Signed-off-by: Wenyou Yang
Reviewed-by: Andreas Bießmann
---
Changes in v3: None
Changes in v2:
- Restore the wrong removal of USB related code.
- Update the com
Enable CONFIG_CLK and CONFIG_PINCTRL to support at91 clock
driver and at91 pinctrl driver.
Move some config options to configs/sama5d4_xplained_*_defconfig
files.
Signed-off-by: Wenyou Yang
Reviewed-by: Andreas Bießmann
---
Changes in v3: None
Changes in v2:
- Restore the wrong removal #defin
Enable CONFIG_CLK and CONFIG_PINCTRL to support at91 clock
driver and at91 pinctrl driver.
Move some config options to configs/sama5d4ek_*_defconfig.
Signed-off-by: Wenyou Yang
Reviewed-by: Andreas Bießmann
---
Changes in v3: None
Changes in v2:
- Restore wrong removal of #define CONFIG_USB_E
Enable early debug UART to debug problems when an ICE or other
debug mechanism is not available.
Signed-off-by: Wenyou Yang
Reviewed-by: Andreas Bießmann
---
Changes in v3: None
Changes in v2: None
board/atmel/sama5d4ek/sama5d4ek.c | 15 ++-
configs/sama5d4ek_mmc_defconfig
Move CONFIG_SYS_NO_FLASH to the configs/sama5d4*_defconfig file.
Signed-off-by: Wenyou Yang
Reviewed-by: Andreas Bießmann
---
Changes in v3:
- add the Reviewed-by tags.
- rebase on the patch:
[PATCH v2] ARM: dts: at91: add device tree files for at91sam9x5ek
http://lists.denx.d
Since the introduction of the pinctrl and clk driver and
the dts file, remove unneeded hard coded related code from
the board file.
Signed-off-by: Wenyou Yang
Reviewed-by: Andreas Bießmann
---
Changes in v3: None
Changes in v2:
- Restore the wrong removal USB related code.
- Update the commit
The purpose of patch set is to convert the board to support Device
Tree and Driver Model.
It is based on the patch set:
[PATCH v5 0/2] pinctrl: at91: Add pinctrl driver
http://lists.denx.de/pipermail/u-boot/2017-February/280463.htm
Changes in v2:
- rebase on the patch set:
Enable early debug UART to debug problems when an ICE or other
debug mechanism is not available.
Signed-off-by: Wenyou Yang
---
Changes in v2: None
board/atmel/sama5d3xek/sama5d3xek.c| 15 ++-
configs/sama5d3xek_mmc_defconfig | 6 ++
configs/sama5d3xek_nandflash_defc
Since the introduction of the pinctrl and clk driver and
the dts file, remove unneeded hard coded related code from
the board file.
Signed-off-by: Wenyou Yang
---
Changes in v2: None
board/atmel/sama5d3xek/sama5d3xek.c | 73 +
1 file changed, 1 insertion(+),
Since the introduction of the pinctrl and clk driver and
the dts file, remove unneeded hard coded related code from
the board file.
Signed-off-by: Wenyou Yang
---
Changes in v2: None
board/atmel/sama5d3_xplained/sama5d3_xplained.c | 19 ---
1 file changed, 19 deletions(-)
diff
Enable CONFIG_CLK and CONFIG_PINCTRL to support at91 clock
driver and at91 pinctrl driver.
Move some config options to configs/sama5d3xek_*_defconfig.
Signed-off-by: Wenyou Yang
---
Changes in v2: None
board/atmel/sama5d3xek/sama5d3xek.c| 2 ++
configs/sama5d3xek_mmc_defconfig | 24
Enable CONFIG_CLK and CONFIG_PINCTRL to support at91 clock
driver and at91 pinctrl driver.
Move some config options to configs/sama5d3xek_*_defconfig.
Signed-off-by: Wenyou Yang
---
Changes in v2: None
configs/sama5d3_xplained_mmc_defconfig | 21 -
configs/sama5d3_xp
Move CONFIG_SYS_NO_FLASH to the configs/sama5d3x_xplained_*_defconfig
files.
Signed-off-by: Wenyou Yang
---
Changes in v2:
- rebase on the patch set:
[PATCH v3 0/8] board: sama5d4: convert boards to support DM/DT
http://lists.denx.de/pipermail/u-boot/2017-February/280506.html
Enable early debug UART to debug problems when an ICE or other
debug mechanism is not available.
Signed-off-by: Wenyou Yang
---
Changes in v2: None
board/atmel/sama5d3_xplained/sama5d3_xplained.c | 16 +++-
configs/sama5d3_xplained_mmc_defconfig | 6 ++
configs/sama5d
On Monday 06 February 2017 11:06 PM, Ken.Lin wrote:
>>> The register setting would turn out to be 0x3D47 on our project boards and
>> our signal measurement results show the patch (v2 version,
>> https://patchwork.ozlabs.org/patch/723461/)) could fix the voltage peak
>> issue.
>>> The proposed so
The sama5d36ek CMP board is the variant of sama5d3xek board.
It is equipped with the low-power DDR2 SDRAM, PMIC ACT8865, and
some power rail. Its main purpose is used to measure the power
consumption. As those changes are done in at91bootstrap,
in U-Boot, use another device tree file, no code to ch
The sama5d36ek CMP board is the variant of sama5d3xek board.
It is equipped with the low-power DDR2 SDRAM, PMIC ACT8865, and
some power rail. Its main purpose is used to measure the power
consumption. As those changes are done in at91bootstrap,
in U-Boot, use another device tree file, no code to ch
Add the driver model support for Atmel mci while retaining the
existing legacy code. This allows the driver to support boards
that have converted to driver model as well as those that have not.
Signed-off-by: Wenyou Yang
Reviewed-by: Simon Glass
---
Changes in v5:
- Add the Reviewed-by tag.
-
The purpose of the patch set is to convert the board to support
Driver Model and Device Tree.
It is based on the patch set:
[PATCH v5 0/2] pinctrl: at91: Add pinctrl driver
http://lists.denx.de/pipermail/u-boot/2017-February/280463.html
Changes in v2:
- rebase on the patch set:
Enable CONFIG_CLK and CONFIG_PINCTRL to support at91 clock
driver and at91 pinctrl driver.
Move some config options to configs/sama5d4ek_*_defconfig, and
make the drivers, spi, emac, gpio, serial and ehci usb to support
the driver model.
Due to the limitation of internal SRAM size, disable the SP
Enable early debug UART to debug problems when an ICE or other
debug mechanism is not available.
Signed-off-by: Wenyou Yang
Reviewed-by: Simon Glass
---
Changes in v2: None
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 14 ++
configs/at91sam9x5ek_dataflash_defconfig | 6 ++
conf
Since the introduction of the pinctrl and clk driver and
the dts file, remove unneeded hard coded related code from
the board file
Signed-off-by: Wenyou Yang
Reviewed-by: Simon Glass
---
Changes in v2: None
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 68 -
1 file
Move CONFIG_SYS_NO_FLASH to the configs/sama5d4*_defconfig file.
Signed-off-by: Wenyou Yang
Reviewed-by: Simon Glass
---
Changes in v2:
- rebase on the patch set:
[RESEND PATCH v2] ARM: at91: add default config file for sama5d36ek CMP
board
http://lists.denx.de/pipermail/u-boo
Hello Simon,
Thank you for the review! I will submit an improved version of the patch.
On 06.02.2017 16:34, Simon Glass wrote:
> Hi Felix,
>
> On 3 February 2017 at 05:29, Felix Brack wrote:
>> This patch adds a pin controller driver supporting devices
>> using a single configuration register p
Hi Patrice,
On 02/03/2017 02:13 AM, patrice.chot...@st.com wrote:
> From: Patrice Chotard
>
> Add SDHCI host controller found on STMicroelctronics SoCs
Just wonder what is flashSS?
Add the minor comments.
>
> Signed-off-by: Patrice Chotard
> ---
> arch/arm/Kconfig |
Hi Bin,
2017-02-07 11:38 GMT+09:00 Bin Meng :
> On Mon, Jan 30, 2017 at 10:12 AM, Masahiro Yamada
> wrote:
>> Import scripts/basic/bin2c.c of Linux.
>>
>> In Linux Kernel, this file was moved to scripts/basic directory by
>> commit 8370edea81e3 ("bin2c: move bin2c in scripts/basic").
>>
>> In U-b
The LD11 SoC is equipped with USB EHCI controllers.
Signed-off-by: Masahiro Yamada
---
configs/uniphier_v8_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/uniphier_v8_defconfig b/configs/uniphier_v8_defconfig
index b6010cc..5dadc4c 100644
--- a/configs/uniphier_v8_defcon
On Tue, Feb 07, 2017 at 09:23:38PM +0900, Masahiro Yamada wrote:
> Hi Bin,
>
> 2017-02-07 11:38 GMT+09:00 Bin Meng :
> > On Mon, Jan 30, 2017 at 10:12 AM, Masahiro Yamada
> > wrote:
> >> Import scripts/basic/bin2c.c of Linux.
> >>
> >> In Linux Kernel, this file was moved to scripts/basic directo
Hi Simon
On 02/06/2017 04:34 PM, Simon Glass wrote:
> H Patrice,
>
> On 2 February 2017 at 09:00, wrote:
>> From: Patrice Chotard
>>
>> The STiH410 is an advanced multi-HD AVC processor with 3D
>> graphics acceleration and 1.5-GHz ARM Cortex-A9 SMP CPU
>> part of the stih407 family.
>>
>> It ha
Hi Jaehoon
On 02/07/2017 11:42 AM, Jaehoon Chung wrote:
> Hi Patrice,
>
> On 02/03/2017 02:13 AM, patrice.chot...@st.com wrote:
>> From: Patrice Chotard
>>
>> Add SDHCI host controller found on STMicroelctronics SoCs
>
> Just wonder what is flashSS?
> Add the minor comments.
On some ST SoCs, i.e
Some devices/boards have their own way to reset the cpu.
Signed-off-by: Phil Edworthy
---
arch/arm/cpu/armv7m/cpu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/cpu/armv7m/cpu.c b/arch/arm/cpu/armv7m/cpu.c
index 58cde93..c3e4734 100644
--- a/arch/arm/cpu/armv7m/cp
This patch adds a pin controller driver supporting devices
using a single configuration register per pin.
Signed-off-by: Felix Brack
---
Changes in v2:
- add a comment on function single_configure_pins() explaining
the function and its parameters
- use fdt_getprop() to simplify retrieval of pro
On Mon, Feb 6, 2017 at 12:16 AM, Tom Rini wrote:
>
> On Fri, Feb 03, 2017 at 02:48:40PM +, Phil Edworthy wrote:
>
> > The SysTick is a 24-bit down counter that is found on all ARM Cortex
> > M3, M4, M7 devices and is always located at a fixed address.
> >
> > Signed-off-by: Phil Edworthy
> >
Hi Kamil,
On 07 February 2017 14:12, Kamil Lulko wrote:
> On Mon, Feb 6, 2017 at 12:16 AM, Tom Rini wrote:
> > On Fri, Feb 03, 2017 at 02:48:40PM +, Phil Edworthy wrote:
> >
> > > The SysTick is a 24-bit down counter that is found on all ARM Cortex
> > > M3, M4, M7 devices and is always locat
On Tue, Feb 07, 2017 at 02:19:39PM +, Phil Edworthy wrote:
> Hi Kamil,
>
> On 07 February 2017 14:12, Kamil Lulko wrote:
> > On Mon, Feb 6, 2017 at 12:16 AM, Tom Rini wrote:
> > > On Fri, Feb 03, 2017 at 02:48:40PM +, Phil Edworthy wrote:
> > >
> > > > The SysTick is a 24-bit down counter
Hi all,
I've compiled u-boot 2017.01 for the TechNexion LS1021A-IOT v1.0 but there is
no output of the u-boot boot process. The serial port application does report
that it is connected.
I have a 700-28203 REV X2 / SCH-28203 REV B3 unit which shows, when booted with
its default u-boot from 2014
Hi Tom,
On 07 February 2017 14:23, Tom Rini wrote:
> On Tue, Feb 07, 2017 at 02:19:39PM +, Phil Edworthy wrote:
> > Hi Kamil,
> >
> > On 07 February 2017 14:12, Kamil Lulko wrote:
> > > On Mon, Feb 6, 2017 at 12:16 AM, Tom Rini wrote:
> > > > On Fri, Feb 03, 2017 at 02:48:40PM +, Phil Edw
On 06/02/2017 14:37, Tom Rini wrote:
On Mon, Feb 06, 2017 at 02:27:42PM +0100, Jean-Jacques Hiblot wrote:
On 06/02/2017 13:47, Tom Rini wrote:
On Mon, Feb 06, 2017 at 12:09:12PM +0100, Jean-Jacques Hiblot wrote:
On 03/02/2017 17:52, Tom Rini wrote:
On Wed, Feb 01, 2017 at 11:53:42AM +0100,
On Mon, Feb 06, 2017 at 10:18:14AM +, Andre Przywara wrote:
> Hi,
>
> On 03/02/17 11:14, Jagan Teki wrote:
> > On Wed, Feb 1, 2017 at 2:36 AM, Andre Przywara
> > wrote:
> >> The OrangePi PC 2 is a typical SBC with the 64-bit Allwinner H5 SoC.
> >> Create a new .dts file for it by including t
On Mon, Feb 06, 2017 at 11:29:26AM +, Andre Przywara wrote:
> Hi,
>
> On 03/02/17 10:52, Jagan Teki wrote:
> > On Wed, Feb 1, 2017 at 2:36 AM, Andre Przywara
> > wrote:
> >> Instead of enumerating all SoC families that need that bit set, let's
> >> just express this more clearly: The SMP bit
This series allows the ti_qspi driver to use the same dts description as the
linux kernel. In Linux since 4.6 the ctrl_mod_mmap is described in the DTS as a
syscon. It used to be the 3rd memory range in "reg".
The first patch of this series is a generic one. It changes the regmap
initialization
t
This is required by the ti_qspi driver to get from the DTS the address of
the ctrl_mod_mmap register.
Signed-off-by: Jean-Jacques Hiblot
---
configs/am57xx_evm_defconfig| 2 ++
configs/am57xx_hs_evm_defconfig | 2 ++
configs/dra7xx_evm_defconfig| 2 ++
configs/dra7xx_hs_evm_defconfig | 2
We used to get the address of the optionnal ctrl_mod_mmap register as the
third memory range of the "reg" property. the linux driver moved to use a
syscon instead. In order to keep the DTS as close as possible to that of
linux, we move to using a syscon as well.
If CONFIG_SYSCON is no set, the dri
In the DTS, the addresses are defined relative to the parent bus. We need
to translate them to get the address as seen by the CPU core.
Signed-off-by: Jean-Jacques Hiblot
---
to: s...@chromium.org
drivers/core/regmap.c | 14 --
1 file changed, 8 insertions(+), 6 deletions(-)
diff
On Mon, Feb 6, 2017 at 3:45 PM, Andrew F. Davis wrote:
> Signed-off-by: Andrew F. Davis
Thanks, guys!
Acked-by: Joe Hershberger
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On Mon, Feb 6, 2017 at 9:17 PM, Alexandru Gagniuc wrote:
> Provide the necessary Kconfig symbols so that PHYLIB support may be
> enabled in Kconfig, as opposed to needing to #define these symbols in
> C source headers.
>
> BITBANGMII and MV88E6352_SWITCH are left out of the PHYLIB submenu as
> the
On 02/02/2017 01:16 AM, Ashish Kumar wrote:
> This i2c errata is only valid for ls2080 and ls2088 SoC
>
> Signed-off-by: Ashish Kumar
> ---
> arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 4
> arch/arm/cpu/armv8/fsl-layerscape/soc.c | 4
> 2 files changed, 8 insertions(+)
The subject
On 02/02/2017 05:43 AM, Ashish Kumar wrote:
> Number of TZASC instances may vary across NXP SoCs.
>
> So put TZASC configuration under instance specific defines.
>
> Signed-off-by: Prabhakar Kushwaha
> Signed-off-by: Ashish Kumar
> ---
> arch/arm/cpu/armv8/fsl-layerscape/Kconfig| 8
+ Feng Li
On 02/06/2017 11:19 PM, Leon Brits wrote:
> Hi all,
>
>
>
> I’ve compiled u-boot 2017.01 for the TechNexion LS1021A-IOT v1.0 but
> there is no output of the u-boot boot process. The serial port
> application does report that it is connected.
>
>
>
> I have a 700-28203 REV X2 / SCH-28203
On 01/24/2017 05:41 AM, thomas.grazia...@omicronenergy.com wrote:
> From: Mark Marshall
>
> The memcpy() function returns a pointer to trg.
>
> Signed-off-by: Mark Marshall
> Reviewed-by: Thomas Graziadei
> ---
> arch/powerpc/lib/memcpy_mpc5200.c | 2 +-
> 1 file changed, 1 insertion(+), 1 dele
On Mon, Feb 06, 2017 at 11:31:14AM -0600, Andrew F. Davis wrote:
> On 02/03/2017 11:23 AM, Tom Rini wrote:
> > On Fri, Feb 03, 2017 at 09:57:03AM +0530, Vignesh R wrote:
> >>
> >>
> >> On Friday 03 February 2017 03:48 AM, Strashko, Grygorii wrote:
> >>> Convert OMAP hsmmc driver to use driver-model
On Tue, Feb 7, 2017 at 10:55 AM, Andrew F. Davis wrote:
> On 02/06/2017 09:17 PM, Alexandru Gagniuc wrote:
>> From: "Andrew F. Davis"
>>
>
> By the way, I don't have compilers for the following boards:
>
> adp-ag101p_defconfig
> 3c120_defconfig
> 10m50_defconfig
> openrisc-generic_defconfig
>
> S
On Mon, Feb 06, 2017 at 12:50:25PM -0600, Grygorii Strashko wrote:
> Hi Tom,
>
> On 02/05/2017 07:56 PM, Tom Rini wrote:
> > On Tue, Jan 31, 2017 at 03:37:02PM -0600, Grygorii Strashko wrote:
> >
> >> This patch seires adds nand uclass driver and enables omap_gpmc to
> >> adopt driver model. This
On Mon, Feb 06, 2017 at 12:30:19PM +0100, Lars Poeschel wrote:
> Albeit it's a typo, neither CONGIG_CMD_STORAGE nor CONFIG_CMD_STORAGE
> are used anywhere, so remove the define from the board configs.
>
> Signed-off-by: Lars Poeschel
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description:
On 01/29/2017 11:21 PM, Priyanka Jain wrote:
>
>
>> -Original Message-
>> From: york sun
>> Sent: Friday, January 27, 2017 11:13 PM
>> To: Priyanka Jain ; u-boot@lists.denx.de
>> Cc: Arpit Goel
>> Subject: Re: [PATCH 2/3] armv8: fsl-lsch3: Update VID support
>>
>> On 01/18/2017 09:43 PM, P
On Tue, Feb 07, 2017 at 11:15:48AM -0600, Joe Hershberger wrote:
> On Tue, Feb 7, 2017 at 10:55 AM, Andrew F. Davis wrote:
> > On 02/06/2017 09:17 PM, Alexandru Gagniuc wrote:
> >> From: "Andrew F. Davis"
> >>
> >
> > By the way, I don't have compilers for the following boards:
> >
> > adp-ag101p
On Mon, Feb 06, 2017 at 07:17:35PM -0800, Alexandru Gagniuc wrote:
> From: "Andrew F. Davis"
>
> Signed-off-by: Andrew F. Davis
[snip]
> 756 files changed, 860 insertions(+), 579 deletions(-)
So this shows we have some places where we need to add 'select PHYLIB'
to drivers and that we need to
On Mon, Feb 06, 2017 at 11:31:43AM -0600, aford...@gmail.com wrote:
> From: Adam Ford
>
> On the OMAP36xx/37xx the CONTROL_WKUP_CTRL register has
> a field (bit 6) named GPIO_IO_PWRDNZ. If 0, the IO buffers which
> are related to GPIO_126, 127 and 129 are disabled. Some boards may
> need this f
On Mon, Feb 06, 2017 at 07:17:33PM -0800, Alexandru Gagniuc wrote:
> The declaration of otg*_plat and otg*_board_data is guarded by
> CONFIG_USB_MUSB_*, but their use in arch_misc_init is not. The
> ifdef flow goes something like:
>
> if (CONFIG_USB_MUSB_* && other_conditions)
> declare usb
On Mon, Feb 06, 2017 at 07:17:32PM -0800, Alexandru Gagniuc wrote:
> When CONFIG_CMD_FASTBOOT or CONFIG_USB_FUNCTION_FASTBOOT are defined
> in am335x_evm.h, a dependency on g_dnl.c is created. This in turn
> creates a dependency on having USB gadget enabled.
> As a result we can't create configs w
On Mon, Feb 06, 2017 at 07:17:34PM -0800, Alexandru Gagniuc wrote:
> Provide the necessary Kconfig symbols so that PHYLIB support may be
> enabled in Kconfig, as opposed to needing to #define these symbols in
> C source headers.
>
> BITBANGMII and MV88E6352_SWITCH are left out of the PHYLIB subme
On Tue, Feb 07, 2017 at 09:52:25AM +0200, Igor Grinberg wrote:
> Hi Roger,
>
> On 02/06/17 11:36, Roger Quadros wrote:
> > PRU ethernet MAC address range is present in the
> > board EEPROM. Parse it and setup eth?addr
> > environment variables.
> >
> > Signed-off-by: Roger Quadros
> > Reviewed-b
On 02/01/2017 05:49 AM, Ashish Kumar wrote:
> CoreLink Cache Coherent Interconnect (CCI) is ARM BUS which
> provides full cache coherency between two clusters of multi-core
> CPUs and I/O coherency for devices and I/O masters.
>
> This patch add new CONFIG defination and move existing register
On 01/20/2017 05:13 PM, york sun wrote:
>
> Then a proper fix would be check the clock name or compatible. If none
> of them exists, we should fix the device tree first.
Yangbo,
Can you fix the code to check clock name or compatible?
York
___
U-Boot ma
Add a new defconfig file for the AM335x High Security EVM. This config
is specific for the case of UART booting
Signed-off-by: Andrew F. Davis
---
configs/am335x_hs_evm_uart_defconfig | 69
1 file changed, 69 insertions(+)
create mode 100644 configs/am335x_h
Sync new additions to non-HS defconfig with HS defconfig. Also add SPL
NAND support, this was disabled before due to size constraints, enable
this now at the expense of the less used GPT partition support.
Signed-off-by: Andrew F. Davis
---
configs/am335x_hs_evm_defconfig | 10 +++---
1 file
On 02/05/2017 07:41 PM, Zhiqiang Hou wrote:
> From: Hou Zhiqiang
>
> Moved the ifdef into ppa.h and removed the duplicated macros.
>
> Signed-off-by: Hou Zhiqiang
> ---
> arch/arm/include/asm/arch-fsl-layerscape/ppa.h | 7 ++-
> arch/arm/include/asm/armv8/sec_firmware.h | 4
> boar
FIT support in the net boot case is much like the RAM boot case in that
we load our image to "load_addr" and pass a dummy read function into
"spl_load_simple_fit()". As the load address is no longer hard-coded to
the final execution address, RAW image loading will rely on "load_addr"
pointing to th
The non-HS defconfig has been modified without equivalent changes being
applied to the HS defconfig. Sync these here.
Signed-off-by: Andrew F. Davis
---
configs/am43xx_hs_evm_defconfig | 8 ++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/configs/am43xx_hs_evm_defconfig b/c
> "Allen" == Allen Martin writes:
Allen> On Tue, Feb 07, 2017 at 01:57:47PM +1100, Peter Chubb wrote:
>> From: Peter Chubb
>>
>> + usb@7d004000 {
>> +status = "okay";
>> + };
>> +
>> + usb-phy@7d004000 {
>> +status = "okay";
>> + };
Allen> Shouldn't these have a vbus-gpio and vbus-
On 01/31/2017 07:33 PM, Dinh Nguyen wrote:
> The mpuclk register in the Altera group of the clock manager
> divides the mpu_clk that is generated from the C0 output of the main
> pll.
>
> Without this patch, the default value of the register is 1, so the mpuclk
> will always get divided by 2 if th
On Tue, Feb 07, 2017 at 01:51:22PM +0800, Bin Meng wrote:
> Hi Tom,
>
> This is U-Boot x86 64-bit preliminary support, on Google Chromebook
> Link and QEMU targets.
>
> The following changes since commit c83a824e62277162ad35f52879b2316902c0eff5:
>
> Merge git://git.denx.de/u-boot-fsl-qoriq (2
On 02/08/2017 02:21 AM, Marek Vasut wrote:
> On 01/31/2017 07:33 PM, Dinh Nguyen wrote:
>> The mpuclk register in the Altera group of the clock manager
>> divides the mpu_clk that is generated from the C0 output of the main
>> pll.
>>
>> Without this patch, the default value of the register is 1, s
On 01/04/2017 02:14 PM, york sun wrote:
> On 12/29/2016 10:01 PM, Prabhakar Kushwaha wrote:
>>
>>> -Original Message-
>>> From: U-Boot [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Abhimanyu
>>> Saini
>>> Sent: Thursday, December 29, 2016 9:52 AM
>>> To: york sun ; u-boot@lists.denx.de
Hi York,
Thanks a lot for your comments!
> -Original Message-
> From: york sun
> Sent: 2017年2月8日 0:32
> To: Z.Q. Hou ; u-boot@lists.denx.de; Mingkai Hu
> ; Prabhakar Kushwaha
>
> Subject: Re: [PATCH] fsl-layerscape/ppa: cleanup ppa.h
>
> On 02/05/2017 07:41 PM, Zhiqiang Hou wrote:
> > F
On Tue, Feb 7, 2017 at 8:58 PM, Icenowy Zheng wrote:
> As cfb_console now can expose its GraphicDevice, use it in the
> implementation of EFI GOP protocol, so that the graphics framebuffer can
> be passed to EFI applications.
>
> Signed-off-by: Icenowy Zheng
> ---
>
> Tested on an Allwinner H3 bo
Hi.
2017-02-07 22:30 GMT+09:00 Felix Brack :
> +
> +static int single_set_state_simple(struct udevice *dev,
> + struct udevice *periph)
> +{
> + const void *fdt = gd->fdt_blob;
> + const struct single_fdt_pin_cfg *prop;
> + int len;
> +
> +
> -Original Message-
> From: york sun
> Sent: Wednesday, February 08, 2017 1:03 AM
> To: Scott Wood; Y.B. Lu; u-boot@lists.denx.de
> Cc: Albert Aribaud; Z.Q. Hou
> Subject: Re: [U-Boot] [PATCH] armv8/fsl-layerscape: fdt: remove SYSCLK
> frequency fixup for ls1012a
>
> On 01/20/2017 05:13 P
On 02/07/2017 07:30 PM, Y.B. Lu wrote:
>> -Original Message-
>> From: york sun
>> Sent: Wednesday, February 08, 2017 1:03 AM
>> To: Scott Wood; Y.B. Lu; u-boot@lists.denx.de
>> Cc: Albert Aribaud; Z.Q. Hou
>> Subject: Re: [U-Boot] [PATCH] armv8/fsl-layerscape: fdt: remove SYSCLK
>> frequenc
2017年2月8日 10:44于 Bin Meng 写道:
>
> On Tue, Feb 7, 2017 at 8:58 PM, Icenowy Zheng wrote:
> > As cfb_console now can expose its GraphicDevice, use it in the
> > implementation of EFI GOP protocol, so that the graphics framebuffer can
> > be passed to EFI applications.
> >
> > Signed-off-by: Ice
Hi Wenyou,
On 3 February 2017 at 18:32, Wenyou Yang wrote:
>
> In order to use the driver model gpio APIs, add the device tree
> support.
>
> Signed-off-by: Wenyou Yang
> ---
>
> drivers/mtd/nand/atmel_nand.c | 143
> ++
> include/fdtdec.h |
Hi Kever,
On 4 February 2017 at 17:24, Kever Yang wrote:
>
> Hi Simon,
>
> Found 1 typo on the subject, 'suport' should be 'support',
> do I need to send a new patch or you can correct it when you apply?
I can correct it when I apply, should be soon.
- Simon
>
> Thanks,
> - Kever
>
> On 01
On 20 January 2017 at 19:51, Simon Glass wrote:
> On 17 January 2017 at 02:32, Romain Perier
> wrote:
>> This commit enables ethernet MAC address randomization on the
>> firefly-rk3288. It removes the error at startup 'ethernet@ff29
>> address not set'.
>>
>> Signed-off-by: Romain Perier
>>
On 20 January 2017 at 19:51, Simon Glass wrote:
> On 16 January 2017 at 21:19, Jacob Chen wrote:
>> To reduce redundant code.
>>
>> Signed-off-by: Jacob Chen
>> ---
>>
>> include/configs/evb_rk3288.h | 14 --
>> include/configs/fennec_rk3288.h | 14 --
>> include/
On 14 January 2017 at 09:26, Simon Glass wrote:
> This is wrong at present, so genboardscfg.py gives the following warnings:
>
> WARNING: no status info for 'chromebook_minnie'
> WARNING: no maintainers for 'chromebook_minnie'
>
> Fix it.
>
> Signed-off-by: Simon Glass
> ---
>
> board/google/vey
On 20 January 2017 at 19:51, Simon Glass wrote:
> On 16 January 2017 at 21:19, Jacob Chen wrote:
>> Keep it same with other boards otherwise i have to write special script for
>> it..
>>
>> Signed-off-by: Jacob Chen
>> ---
>>
>> configs/firefly-rk3288_defconfig | 2 +-
>> include/configs/firef
Hi Eddie,
On 17 January 2017 at 21:51, Eddie Cai wrote:
> Thanks Kever
> Hi Simon
>
> I did some search and found you acked the Jacob's patch, see [0]. But didn't
> apply it. Did you lost this patch?
>
> [0]https://patchwork.ozlabs.org/patch/694820/
Yes I did - will reply on that thread.
Regard
On 10 January 2017 at 06:44, Jacob Chen wrote:
>
> 2016-11-18 9:13 GMT+08:00 Simon Glass :
> > On 14 November 2016 at 21:01, Jacob Chen wrote:
> >> miniarm board use lpddr3
> >>
> >> Signed-off-by: Jacob Chen
> >> ---
> >>
> >> arch/arm/dts/rk3288-miniarm.dts | 16
> >> 1 file
Hi Kever,
On 4 February 2017 at 16:30, Kever Yang wrote:
> Hi Simon,
>
> For rk3399, the data for sdram driver in dts is big, I don't want to do
> the copy for it,
Are you referring to the call to fdtdec_get_int_array()? Don't you
have heaps of SRAM though? So why does it matter? If you are
Hi Kever,
On 4 February 2017 at 17:41, Kever Yang wrote:
> Hi Simon,
>
> On 01/24/2017 09:51 PM, Simon Glass wrote:
>
> Hi Kever,
>
> On 18 January 2017 at 05:16, Kever Yang wrote:
>> This series patch enable basic driver for rk3399 SPL, the ATF support
>> has been split as a separate patch.
>>
+Tom in case you have some thoughts
Hi Kever,
On 4 February 2017 at 18:45, Kever Yang wrote:
> Hi Simon,
>
> On 01/26/2017 10:23 PM, Simon Glass wrote:
>>
>> Hi Kever,
>>
>> On 18 January 2017 at 05:16, Kever Yang wrote:
>>>
>>> RK3399 support DDR3, LPDDR3, DDR4 sdram, this patch is porting fro
Hi Kever,
On 4 February 2017 at 19:01, Kever Yang wrote:
> Hi Simon,
>
>
> On 01/26/2017 10:23 PM, Simon Glass wrote:
>>
>> Hi Kever,
>>
>> On 18 January 2017 at 05:16, Kever Yang wrote:
>>>
>>> Add spl support for rk3399, default with of-platdata enabled.
>>>
>>> Signed-off-by: Kever Yang
>>>
Hi,
On 7 February 2017 at 21:50, Icenowy Zheng wrote:
>
> 2017年2月8日 10:44于 Bin Meng 写道:
>>
>> On Tue, Feb 7, 2017 at 8:58 PM, Icenowy Zheng wrote:
>> > As cfb_console now can expose its GraphicDevice, use it in the
>> > implementation of EFI GOP protocol, so that the graphics framebuffer can
>>
On Wednesday 08 February 2017 12:36 AM, Yung-Ching LIN wrote:
> On Tue, Feb 7, 2017 at 12:50 AM, Sekhar Nori wrote:
>> On Monday 06 February 2017 11:06 PM, Ken.Lin wrote:
>>
> The register setting would turn out to be 0x3D47 on our project boards and
our signal measurement results show th
For validating images from uboot (Such as Kernel Image), either keys
from SoC fuses can be used or keys from a verified table of public keys
can be used. The latter feature is called IE Key Extension Feature.
On ls-ch3 platforms,IE table is validated by Bootrom and address of this
table is written
On Tue, Feb 7, 2017 at 12:50 AM, Sekhar Nori wrote:
> On Monday 06 February 2017 11:06 PM, Ken.Lin wrote:
>
The register setting would turn out to be 0x3D47 on our project boards and
>>> our signal measurement results show the patch (v2 version,
>>> https://patchwork.ozlabs.org/patch/723461/)
Hello,
i've following trouble on a new custom zynq board:
There is a axi4pcie root-complex implemented within the FPGA, i added
this to my devicetree:
pci_express: axi-pcie@9000 {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
status =
1 - 100 of 102 matches
Mail list logo