Hi Philipp,
在 2017/9/20 19:54, Philipp Tomsich 写道:
Enable the Rockchip SARADC driver on all supported SoCs (i.e. all
except the RK3036 and RK3228, which don't have this peripheral):
RK3188, RK3288, RK3328, RK3368, RK3399 and RV1108.
Signed-off-by: Philipp
The clk_saradc is dividing from the 24M, clk_saradc=24MHz/(saradc_div_con+1).
SARADC integer divider control register is 10-bits width.
Signed-off-by: David Wu
Acked-by: Philipp Tomsich
Reviewed-by: Philipp Tomsich
The clk_saradc is dividing from the 24M, clk_saradc=24MHz/(saradc_div_con+1).
SARADC integer divider control register is 10-bits width.
Signed-off-by: David Wu
Acked-by: Philipp Tomsich
Reviewed-by: Philipp Tomsich
Enable the SARADC for download key pressed detect.
Signed-off-by: David Wu
---
Changes in v3:
- Add commit message
Changes in v2: None
arch/arm/dts/rv1108-evb.dts | 4
1 file changed, 4 insertions(+)
diff --git a/arch/arm/dts/rv1108-evb.dts
From: Vipul Kumar
This patch tests the gpio commands using the
gpio data from boardenv file.
Also one test will show the default status of all the gpio's
supported by the processor.
Signed-off-by: Vipul Kumar
Signed-off-by: Michal Simek
On 14.09.17 00:05, Rob Clark wrote:
Helpers to construct device-paths from devices, partitions, files, and
for parsing and manipulating device-paths.
For non-legacy devices, this will use u-boot's device-model to construct
device-paths which include bus hierarchy to construct device-paths.
Hi Bin,
On Tue, Sep 19, 2017 at 8:32 PM, Bin Meng wrote:
> Hi Suneel,
>
> On Wed, Sep 20, 2017 at 2:31 AM, Suneel Garapati
> wrote:
>> Hi Bin,
>>
>> On Tue, Sep 19, 2017 at 12:32 AM, Bin Meng wrote:
>>> Hi Suneel,
>>>
>>> On Tue,
Spam detection software, running on the system "lists.denx.de",
has identified this incoming email as possible spam. The original
message has been attached to this so you can view it or label
similar future email. If you have any questions, see
@@CONTACT_ADDRESS@@ for details.
Content preview:
The clk_saradc is dividing from the 24M, clk_saradc=24MHz/(saradc_div_con+1).
SARADC integer divider control register is 8-bits width.
Signed-off-by: David Wu
Reviewed-by: Philipp Tomsich
Acked-by: Philipp Tomsich
The clk_saradc is dividing from the 24M, clk_saradc=24MHz/(saradc_div_con+1).
SARADC integer divider control register is 8-bits width.
Signed-off-by: David Wu
Acked-by: Philipp Tomsich
Reviewed-by: Philipp Tomsich
The clk_saradc is dividing from the 24M, clk_saradc=24MHz/(saradc_div_con+1).
SARADC integer divider control register is 8-bits width.
Signed-off-by: David Wu
Acked-by: Philipp Tomsich
Reviewed-by: Philipp Tomsich
Enable the SARADC for download key pressed detect.
Signed-off-by: David Wu
---
Changes in v3:
- Add commit message
Changes in v2: None
arch/arm/dts/rk3399-evb.dts | 4
1 file changed, 4 insertions(+)
diff --git a/arch/arm/dts/rk3399-evb.dts
Spam detection software, running on the system "lists.denx.de",
has identified this incoming email as possible spam. The original
message has been attached to this so you can view it or label
similar future email. If you have any questions, see
@@CONTACT_ADDRESS@@ for details.
Content preview:
Enable the SARADC for download key pressed detect.
Signed-off-by: David Wu
---
Changes in v3:
- Add commit message
Changes in v2: None
arch/arm/dts/rk3368-px5-evb.dts | 4
1 file changed, 4 insertions(+)
diff --git a/arch/arm/dts/rk3368-px5-evb.dts
The SARADC is used for adc keys and charging detect at uboot
loader. Except for the rk3036 and rk3228 Socs, the others
support the SARADC IP.
Changes in v3:
- Add commit message
- Add commit message
- Add commit message
- Add commit message
- Add commit message
- Add commit message
Changes in
Spam detection software, running on the system "lists.denx.de",
has identified this incoming email as possible spam. The original
message has been attached to this so you can view it or label
similar future email. If you have any questions, see
@@CONTACT_ADDRESS@@ for details.
Content preview:
Hi Suneel,
On Wed, Sep 20, 2017 at 2:32 PM, Suneel Garapati wrote:
> Hi Bin,
>
> On Tue, Sep 19, 2017 at 8:32 PM, Bin Meng wrote:
>> Hi Suneel,
>>
>> On Wed, Sep 20, 2017 at 2:31 AM, Suneel Garapati
>> wrote:
>>> Hi Bin,
>>>
On 14.09.17 00:05, Rob Clark wrote:
Similar to a "real" UEFI implementation, the bootmgr looks at the
BootOrder and Boot variables to try to find an EFI payload to load
and boot. This is added as a sub-command of bootefi.
The idea is that the distro bootcmd would first try loading a
On 14.09.17 00:05, Rob Clark wrote:
This patchset fleshes out EFI_LOADER enough to support booting an
upstream \EFI\BOOT\bootaa64.efi (which then loads fallback.efi and
then eventually the per-distro shim.efi which loads the per-distro
grubaa64.efi) without resorting to hacks to hard-code
Hi Simon,
2017-09-20 22:49 GMT+09:00 Simon Glass :
> Hi Masahiro,
>
> On 19 September 2017 at 20:51, Masahiro Yamada
> wrote:
>> Hi Simon,
>>
>>
>> 2017-09-17 6:23 GMT+09:00 Simon Glass :
>>
>>>
>>> +menu "Logging"
>>> +
>>>
2017-09-20 23:37 GMT+09:00 Dr. Philipp Tomsich
:
> Masahiro & Simon,
>
>> On 20 Sep 2017, at 15:49, Simon Glass wrote:
>>
>> Hi Masahiro,
>>
>> On 19 September 2017 at 20:51, Masahiro Yamada
>> wrote:
>>> Hi
Hello Rob, hello Alex,
when I try to compile efi-next I get
CC cmd/bootefi.o
cmd/bootefi.c: In function ‘do_bootefi’:
cmd/bootefi.c:285:3: error: ‘loaded_image_info’ undeclared (first use in
this function)
loaded_image_info.device_handle = bootefi_device_path;
^
On 09/20/2017 11:43 AM, Heinrich Schuchardt wrote:
On 09/20/2017 06:41 PM, Stephen Warren wrote:
On 09/19/2017 02:04 PM, Heinrich Schuchardt wrote:
The necessary parameters for running Python tests on qemu are
tedious to find.
The patch adds a complete example for running the Python tests for
Now that it is possible to load SPL and u-boot.img via imx_usb_loader
tool, mention this method instead of the old one that relied on ymodem.
Signed-off-by: Fabio Estevam
---
doc/README.imx6 | 32 +++-
1 file changed, 3 insertions(+), 29
Hi Simon,
On Wed, Sep 20, 2017 at 9:50 PM, Simon Glass wrote:
> Hi Bin,
>
> On 17 September 2017 at 21:45, Bin Meng wrote:
>> Hi Simon,
>>
>> On Sun, Sep 17, 2017 at 5:23 AM, Simon Glass wrote:
>>> Add the logging header file and
On 09/19/2017 02:15 PM, Heinrich Schuchardt wrote:
On 09/18/2017 11:28 PM, Stephen Warren wrote:
On 09/18/2017 01:55 PM, Heinrich Schuchardt wrote:
On 09/18/2017 08:27 PM, Stephen Warren wrote:
On 09/17/2017 01:32 PM, Heinrich Schuchardt wrote:
The necessary parameters for running Python
Masahiro,
> On 20 Sep 2017, at 19:34, Masahiro Yamada
> wrote:
>
> 2017-09-20 23:37 GMT+09:00 Dr. Philipp Tomsich
> :
>> Masahiro & Simon,
>>
>>> On 20 Sep 2017, at 15:49, Simon Glass wrote:
>>>
>>> Hi
On 09/20/2017 01:55 AM, Michal Simek wrote:
From: Vipul Kumar
This patch tests the gpio commands using the
gpio data from boardenv file.
Also one test will show the default status of all the gpio's
supported by the processor.
Nit: Wrap the commit description to
On 09/20/2017 06:41 PM, Stephen Warren wrote:
> On 09/19/2017 02:04 PM, Heinrich Schuchardt wrote:
>> The necessary parameters for running Python tests on qemu are
>> tedious to find.
>>
>> The patch adds a complete example for running the Python tests for
>> qemu-x86_defconfig on an X86 system.
>
On 09/19/2017 02:04 PM, Heinrich Schuchardt wrote:
The necessary parameters for running Python tests on qemu are
tedious to find.
The patch adds a complete example for running the Python tests for
qemu-x86_defconfig on an X86 system.
diff --git a/test/py/README.md b/test/py/README.md
On Wed, Sep 20, 2017 at 9:49 AM, Simon Glass wrote:
> Hi Heinrich,
>
> On 15 September 2017 at 00:35, Heinrich Schuchardt wrote:
>> On 08/31/2017 02:52 PM, Simon Glass wrote:
>>> On 27 August 2017 at 06:53, Heinrich Schuchardt wrote:
On 09/18/2017 08:47 AM, York Sun wrote:
> On 09/17/2017 10:55 AM, Simon Glass wrote:
>> Hi York,
>>
>> On 14 September 2017 at 13:01, York Sun wrote:
>>> This partially reverts commit 15eb1d43bf470b85e9031c2fce7e0ce7b27dd321
>>> which intended to move assignment of board info
This patchset is mainly for Allwinner DE2 HDMI SimpleFB support.
The framebuffer initialized by the Allwinner DE2 driver can be
passed by to the kernel as simplefb, and this can enable the
kernel to display graphics without having full DE2 driver.
Add the suppot of simplefb in DE2 code.
The
Add an option to indicate that the video driver should setup a SimpleFB
node that passes the video framebuffer initialized by U-Boot to the
operating system kernel.
Currently only the Allwinner DE1 driver uses this option, and the
definition of this option in the sunxi-common.h config header is
As the DE2 simplefb setup code can also benefit from the simplefb match
code, extract it to a new source file.
Signed-off-by: Icenowy Zheng
Reviewed-by: Andre Przywara
Acked-by: Maxime Ripard
---
Changes in v4:
- Add
Hi Simon,
On Wed, Sep 20, 2017 at 9:49 PM, Simon Glass wrote:
> Hi Bin,
>
> On 19 September 2017 at 21:40, Bin Meng wrote:
>> Hi,
>>
>> Not sure if I am running sandbox correctly with USB support, but here
>> is the log:
>>
>> $ ./u-boot -D
>>
>>
>> U-Boot
> On 20 Sep 2017, at 16:41, Bin Meng wrote:
>
> Hi Simon,
>
> On Wed, Sep 20, 2017 at 9:50 PM, Simon Glass wrote:
>> Hi Bin,
>>
>> On 17 September 2017 at 21:45, Bin Meng wrote:
>>> Hi Simon,
>>>
>>> On Sun, Sep 17, 2017 at 5:23
On Wed, Sep 20, 2017 at 5:08 AM, Alexander Graf wrote:
>
>
> On 14.09.17 00:05, Rob Clark wrote:
>>
>> Similar to a "real" UEFI implementation, the bootmgr looks at the
>> BootOrder and Boot variables to try to find an EFI payload to load
>> and boot. This is added as a
As the support of EFI boot on Allwinner H3 is broken, we still need to
use simplefb to pass the framebuffer to Linux.
Add code to setup simplefb for Allwinner DE2 driver.
Signed-off-by: Icenowy Zheng
Acked-by: Maxime Ripard
---
Changes in v4:
Masahiro & Simon,
> On 20 Sep 2017, at 15:49, Simon Glass wrote:
>
> Hi Masahiro,
>
> On 19 September 2017 at 20:51, Masahiro Yamada
> wrote:
>> Hi Simon,
>>
>>
>> 2017-09-17 6:23 GMT+09:00 Simon Glass :
>>
>>>
>>> +menu
On all other platforms the command 'findfdt' populates the variable
'fdtfile', but on K2G we only populate 'name_fdt'. The generic boot
and automation scripts fail when 'findfdt' is not populated, fix
this for K2G.
Signed-off-by: Andrew F. Davis
---
include/configs/k2g_evm.h | 2 +-
On AM43xx HS devices, QSPI boot is XIP and we use a single stage
bootloader. Add a defconfig for this.
Signed-off-by: Andrew F. Davis
---
MAINTAINERS | 1 +
configs/am43xx_hs_evm_qspi_defconfig | 56
2 files changed, 57
Dear Simon,
sorry for jumping in so late...
In message <20170916212331.170463-1-...@chromium.org> you wrote:
>
> At present U-Boot has a logbuffer feature which records output in a memory
> buffer for later display or storage. This is useful but is not at present
> enabled for any board.
On Wed, Sep 20, 2017 at 2:42 PM, Heinrich Schuchardt wrote:
> Hello Rob, hello Alex,
>
> when I try to compile efi-next I get
>
> CC cmd/bootefi.o
> cmd/bootefi.c: In function ‘do_bootefi’:
> cmd/bootefi.c:285:3: error: ‘loaded_image_info’ undeclared (first use in
>
The EFI selftest has been broken by a patch on efi-next.
We should enable CONFIG_CMD_BOOTEFI_SELFTEST on
qemu-x86_defconfig and qemu-x86_64_defconfig by default
to catch this type of problem in the Travis CI tests.
These systems typically have abundant memory so that
enabling this option should
From: Madan Srinivas
This patch adds support for authentication of both plain
text and encrypted binaries. A new SECDEV package is needed
to enable encryption of binaries by default for AM3x.
The ROM authentication API detects encrypted images at
runtime and automatically
On Wed, Sep 20, 2017 at 4:54 PM, Heinrich Schuchardt wrote:
> ad503ffe9c6 efi_loader: refactor boot device and loaded_image handling
> leads to an error when building with CONFIG_CMD_BOOTEFI_SELFTEST=y
> This patch fixes the problem.
>
> Fixes: ad503ffe9c6 efi_loader: refactor
On secure devices the initial secure software may install a firewall at
the end of DRAM, define protected RAM to avoid space.
Signed-off-by: Andrew F. Davis
---
include/configs/am43xx_evm.h | 5 +
1 file changed, 5 insertions(+)
diff --git a/include/configs/am43xx_evm.h
Add a new defconfig file for the AM335x High Security EVM. This config
is specific for the case of UART booting
Signed-off-by: Andrew F. Davis
---
Note: This only builds with GCC6+ due to size limitations
for SPL to fit into SRAM
MAINTAINERS | 1 +
ad503ffe9c6 efi_loader: refactor boot device and loaded_image handling
leads to an error when building with CONFIG_CMD_BOOTEFI_SELFTEST=y
This patch fixes the problem.
Fixes: ad503ffe9c6 efi_loader: refactor boot device and loaded_image handling
Signed-off-by: Heinrich Schuchardt
ad503ffe9c6 efi_loader: refactor boot device and loaded_image handling
leads to an error when building with CONFIG_CMD_BOOTEFI_SELFTEST=y
This patch fixes the problem.
Fixes: ad503ffe9c6 efi_loader: refactor boot device and loaded_image handling
Signed-off-by: Heinrich Schuchardt
On 09/20/2017 04:32 AM, Masahiro Yamada wrote:
> Hi Simon,
>
>
> 2017-09-17 6:23 GMT+09:00 Simon Glass :
>> U-Boot currently has fairly rudimentary logging features. A basic printf()
>> provides console output and debug() provides debug output which is
>> activated if DEBUG is
On Wed, Sep 20, 2017 at 3:46 PM, Heinrich Schuchardt wrote:
> ad503ffe9c6 efi_loader: refactor boot device and loaded_image handling
> leads to an error when building with CONFIG_CMD_BOOTEFI_SELFTEST=y
> This patch fixes the problem.
>
> Fixes: ad503ffe9c6 efi_loader: refactor
From: Fabio Estevam
Add support for the latest MX6QP wandboard variant.
Based on Richard Hu's work from Technexion's U-Boot tree.
Signed-off-by: Fabio Estevam
---
arch/arm/include/asm/arch-mx6/imx-regs.h | 3 +
board/wandboard/spl.c
From: Fabio Estevam
Add support for the latest MX6QP wandboard variant.
Based on Richard Hu's work from Technexion's U-Boot tree.
Signed-off-by: Fabio Estevam
---
Changes since v1:
- None
arch/arm/include/asm/arch-mx6/imx-regs.h | 3 +
On Wed, Sep 20, 2017 at 10:35:08PM +, York Sun wrote:
> On 09/15/2017 08:21 AM, York Sun wrote:
> > common/spl/spl_fit.c:201:12: warning: passing argument 4 of ‘gunzip’
> > from incompatible pointer type [-Wincompatible-pointer-types]
> > src, ))
> >
> > Signed-off-by: York Sun
efi_exit() already restores gd, so we shouldn't EFI_EXIT() on the
otherside of the longjmp().
Signed-off-by: Rob Clark
---
cmd/bootefi.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/cmd/bootefi.c b/cmd/bootefi.c
index fdfed1be05..a049e5f64d 100644
--- a/cmd/bootefi.c
On 09/15/2017 08:21 AM, York Sun wrote:
> common/spl/spl_fit.c:201:12: warning: passing argument 4 of ‘gunzip’
> from incompatible pointer type [-Wincompatible-pointer-types]
> src, ))
>
> Signed-off-by: York Sun
> Reported-by: Heinrich Schuchardt
>
From: Fabio Estevam
Latest wandboard hardware revision is revd1, which brings the following
new features:
- PFUZE100 PMIC
- AR8035 Ethernet PHY
- Upgrade Wifi/BT chip to BCM4339/BCM43430.
The detection mechanism is to probe the PMIC and when it is
found, then the
From: Fabio Estevam
Latest wandboard hardware revision is revd1, which brings the following
new features:
- PFUZE100 PMIC
- AR8035 Ethernet PHY
- Upgrade Wifi/VT chip to BCM4339/BCM43430.
The detection mechanism is to probe the PMIC and when it is
found, then the
Hi Bin,
On Wed, Sep 20, 2017 at 12:42 AM, Bin Meng wrote:
> Hi Suneel,
>
> On Wed, Sep 20, 2017 at 2:32 PM, Suneel Garapati
> wrote:
>> Hi Bin,
>>
>> On Tue, Sep 19, 2017 at 8:32 PM, Bin Meng wrote:
>>> Hi Suneel,
>>>
>>> On Wed,
On Wed, Sep 20, 2017 at 03:47:53PM +0200, Stefano Babic wrote:
> Hi Tom,
>
> please pull from u-boot-imx, thanks !
>
> The following changes since commit 08cebeeaadd9192dd501308ac6a8b858ffa255c1:
>
> Merge git://git.denx.de/u-boot-fdt (2017-09-15 22:34:34 -0400)
>
> are available in the git
On Tue, Sep 19, 2017 at 08:32:11PM -0500, Adam Ford wrote:
> With the device tree ported from Linux 4.13, this enables
> Driver Model and Device Tree support for the am3517-evm
>
> Signed-off-by: Adam Ford
Tested-by: Derald D. Woods
> ---
>
On Wed, Sep 20, 2017 at 5:31 PM, Stefan Roese wrote:
> Hi Chris,
>
> On 19.09.2017 20:58, Chris Packham wrote:
>>
>> When you did the port from Marvell's source did you script any of the
>> tidy-up that you did along the way?
>
>
> Not really. At least not in a reproducible way. I
Hi Bin,
On 20 September 2017 at 08:06, Bin Meng wrote:
> Hi Simon,
>
> On Wed, Sep 20, 2017 at 9:49 PM, Simon Glass wrote:
>> Hi Bin,
>>
>> On 19 September 2017 at 21:40, Bin Meng wrote:
>>> Hi,
>>>
>>> Not sure if I am running sandbox
Hi,
On 20 September 2017 at 08:09, Rob Clark wrote:
> On Wed, Sep 20, 2017 at 5:08 AM, Alexander Graf wrote:
>>
>>
>> On 14.09.17 00:05, Rob Clark wrote:
>>>
>>> Similar to a "real" UEFI implementation, the bootmgr looks at the
>>> BootOrder and Boot
Hi Rob,
On 20 September 2017 at 08:23, Rob Clark wrote:
> On Wed, Sep 20, 2017 at 9:49 AM, Simon Glass wrote:
>> Hi Heinrich,
>>
>> On 15 September 2017 at 00:35, Heinrich Schuchardt
>> wrote:
>>> On 08/31/2017 02:52 PM, Simon Glass
Hi Bin,
On 20 September 2017 at 08:41, Bin Meng wrote:
>
> Hi Simon,
>
> On Wed, Sep 20, 2017 at 9:50 PM, Simon Glass wrote:
> > Hi Bin,
> >
> > On 17 September 2017 at 21:45, Bin Meng wrote:
> >> Hi Simon,
> >>
> >> On Sun, Sep 17,
add blk child devices to ignore list while displaying usb tree graph,
also preamble should not be set for blk child devices.
add usb_emul to ignore list in usb_show_info. otherwise usb tree and
info commands may cause crash treating blk as usb device.
Signed-off-by: Suneel Garapati
add blk child devices to ignore list while displaying
usb tree graph, otherwise usb tree and info commands
may cause crash treating blk as usb device.
Signed-off-by: Suneel Garapati
---
Changes v4:
- do not set preamble if child is block device for mass storage
Changes
On Tue, Sep 19, 2017 at 08:32:10PM -0500, Adam Ford wrote:
> To keep the DTS and DTSI files clean and in sync with Linux, new
> u-boot.dtsi files are added.
>
> There are some spacing issues in the patch, but they appear to be
> present in the Linux source files. I'll try to get to fixing them
Hi Tom,
Please pull the following patch from u-boot-nds32 into your tree.
Thanks!
The following changes since commit e884656c2c0b2406b9bf99ea76f5a8c75128a331:
Merge git://www.denx.de/git/u-boot-imx (2017-09-20 12:32:34 -0400)
are available in the git repository at:
> Am 21.09.2017 um 06:58 schrieb Simon Glass :
>
> Hi,
>
>> On 20 September 2017 at 08:09, Rob Clark wrote:
>>> On Wed, Sep 20, 2017 at 5:08 AM, Alexander Graf wrote:
>>>
>>>
On 14.09.17 00:05, Rob Clark wrote:
Similar
Now the u-boot spi image is greater than 0x8, increase the same
in env during spi erase.
Reported-by: Yan Liu
Signed-off-by: Lokesh Vutla
---
include/configs/ti_armv7_keystone2.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
For the patchset, Ping..
Thanks,
Peng.
On Wed, Aug 30, 2017 at 02:14:42PM +0800, Peng Fan wrote:
>Typo fix: CONIFG->CONFIG
>
>Signed-off-by: Peng Fan
>Cc: Tom Rini
>---
>
>V2: new
>V3: none
>V4: none
>
> scripts/Makefile.uncmd_spl | 2 +-
> 1 file changed, 1
With DM enabled, gpio numbering is assigned based on the
probed order of gpios, irrespective of the gpio base. So enable
all necessary gpios in SPL.
Fixes: edf25d94d55c (“ARM: dts: OMAP5+: Enable gpio in SPL”)
Reported-by: Gou, Hongmei
Tested-by: Aparna Balasubramanian
Hi Suneel,
On Thu, Sep 21, 2017 at 10:17 AM, Suneel Garapati
wrote:
> add blk child devices to ignore list while displaying
> usb tree graph, otherwise usb tree and info commands
> may cause crash treating blk as usb device.
>
> Signed-off-by: Suneel Garapati
Hi Bin,
On Wed, Sep 20, 2017 at 8:35 PM, Bin Meng wrote:
> Hi Suneel,
>
> On Thu, Sep 21, 2017 at 10:17 AM, Suneel Garapati
> wrote:
>> add blk child devices to ignore list while displaying
>> usb tree graph, otherwise usb tree and info commands
>>
From: rick
It is caused from asm/io.h declare different input type.
Signed-off-by: rick
---
arch/nds32/include/asm/io.h | 12 ++--
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/nds32/include/asm/io.h
Hi Heinrich,
On 20 September 2017 at 14:20, Heinrich Schuchardt wrote:
> On 09/20/2017 04:32 AM, Masahiro Yamada wrote:
>> Hi Simon,
>>
>>
>> 2017-09-17 6:23 GMT+09:00 Simon Glass :
>>> U-Boot currently has fairly rudimentary logging features. A basic
Hi Wolfgang,
On 20 September 2017 at 13:55, Wolfgang Denk wrote:
> Dear Simon,
>
> sorry for jumping in so late...
>
> In message <20170916212331.170463-1-...@chromium.org> you wrote:
>>
>> At present U-Boot has a logbuffer feature which records output in a memory
>> buffer for
Hi,
I did few tests, see results inline.
On Tue, Sep 19, 2017 at 12:00 PM, Vasily Khoruzhick wrote:
> On Tue, Sep 19, 2017 at 1:33 AM, Maxime Ripard
> wrote:
>> On Mon, Sep 18, 2017 at 10:04:21PM -0700, Vasily Khoruzhick wrote:
>>> Extend
From: Ashish Kumar
Signed-off-by: Ashish Kumar
Signed-off-by: Amrita Kumari
Signed-off-by: Ran Wang
---
Change in v2:
1.Adjust USB nodes position in dts to keep them sorted in
From: Ashish Kumar
Signed-off-by: Amrita Kumari
Signed-off-by: Ashish Kumar
Signed-off-by: Ran Wang
---
Change in v2:
Remove macro CONFIG_HAS_FSL_XHCI_USB and CONFIG_USB_XHCI_FSL
and
On 13/09/2017 23:29, Stefan Agner wrote:
> From: Stefan Agner
>
> This macro allows to detect whether the USB PHY is active. This
> is helpful to detect if the boot ROM has previously started the
> USB serial downloader.
>
> The idea is taken from the mfgtool support
On 13/09/2017 23:29, Stefan Agner wrote:
> From: Stefan Agner
>
> The current mechanism using SCR/GPR registers work well when
> the serial downloader boot mode has been selected explicitly
> (either via boot mode pins or using bmode command). However,
> in case the
On 31/08/2017 17:34, Eric Nelson wrote:
> Update these macros to use all upper-case to avoid checkpatch
> warnings:
>
> ENET_25MHz,
> ENET_50MHz,
> ENET_125MHz,
>
> Signed-off-by: Eric Nelson
> ---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
On 28/08/2017 20:58, Anatolij Gustschin wrote:
> bss section is cleared in crt0.S. board_init_r() is also
> entered from crt0 code.
>
> Signed-off-by: Anatolij Gustschin
> Cc: Christian Gmeiner
> Cc: Nikita Kiryanov
> Cc: Jagan
On 29/08/2017 18:53, Vanessa Maegima wrote:
> The NXP 4.1 kernel needs to boot with secure boot.
>
> Add information on how to enable secure boot mode.
>
> Signed-off-by: Vanessa Maegima
> ---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
On 24/08/2017 17:49, Dennis Gilmore wrote:
> The hummingboard2 is slightly different to the cubox i and to the
> hummingboard. The GPIO pin info to probe came from solidruns
> for of u-boot on github.
>
On 22/08/2017 08:03, Jose Alarcon wrote:
> From: Ian Ray
>
> Define i2c mux configuration. Add new vpd_reader which is used to read
> vital product data. Read VPD from EEPROM and set eth0 MAC address.
>
> Signed-off-by: Ian Ray
> Signed-off-by: Jose Alarcon
On 06/09/2017 01:46, Fabio Estevam wrote:
> From: Fabio Estevam
>
> Instead of having every board file to add its own g_dnl_bind_fixup()
> implementation, move it to the common imx6 SPL code.
>
> Signed-off-by: Fabio Estevam
> Reviewed-by: Łukasz
On 06/09/2017 01:46, Fabio Estevam wrote:
> From: Fabio Estevam
>
> Add Serial Download Protocol support (SDP), which allows loading
> SPL and u-boot.img via imx_usb_loader tool as explained in
> doc/README.sdp.
>
> Signed-off-by: Fabio Estevam
>
Hi Tom,
please pull from u-boot-imx, thanks !
The following changes since commit 08cebeeaadd9192dd501308ac6a8b858ffa255c1:
Merge git://git.denx.de/u-boot-fdt (2017-09-15 22:34:34 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch
Hi Bin,
On 19 September 2017 at 21:40, Bin Meng wrote:
> Hi,
>
> Not sure if I am running sandbox correctly with USB support, but here
> is the log:
>
> $ ./u-boot -D
>
>
> U-Boot 2017.09-00191-gc145392-dirty (Sep 17 2017 - 21:33:01 +0800)
>
> Model: sandbox
> DRAM: 128 MiB
Hi Heinrich,
On 15 September 2017 at 00:35, Heinrich Schuchardt wrote:
> On 08/31/2017 02:52 PM, Simon Glass wrote:
>> On 27 August 2017 at 06:53, Heinrich Schuchardt wrote:
>>> Signed-off-by: Heinrich Schuchardt
>>> ---
>>>
Hi Rob,
On 17 September 2017 at 13:39, Rob Clark wrote:
> On Sun, Sep 17, 2017 at 3:30 PM, Simon Glass wrote:
>> Hi Rob,
>>
>> On 17 September 2017 at 13:26, Rob Clark wrote:
>>> On Sun, Sep 17, 2017 at 1:55 PM, Simon Glass
Hi Heinrich,
On 15 September 2017 at 00:48, Heinrich Schuchardt wrote:
> On 08/31/2017 02:52 PM, Simon Glass wrote:
>> On 27 August 2017 at 06:53, Heinrich Schuchardt wrote:
>>> Signed-off-by: Heinrich Schuchardt
>>> ---
>>>
Hi Bin,
On 17 September 2017 at 21:45, Bin Meng wrote:
> Hi Simon,
>
> On Sun, Sep 17, 2017 at 5:23 AM, Simon Glass wrote:
>> Add the logging header file and implementation with some configuration
>> options to control it.
>>
>> Signed-off-by: Simon Glass
Hi Masahiro,
On 19 September 2017 at 20:51, Masahiro Yamada
wrote:
> Hi Simon,
>
>
> 2017-09-17 6:23 GMT+09:00 Simon Glass :
>
>>
>> +menu "Logging"
>> +
>> +config LOG
>> + bool "Enable logging support"
>> + help
>> + This
1 - 100 of 135 matches
Mail list logo