On Tue, 2019-02-12 at 11:17 +0100, Marek Vasut wrote:
> On 2/12/19 11:13 AM, Chee, Tien Fong wrote:
> > On Tue, 2019-02-12 at 10:43 +0100, Marek Vasut wrote:
> > > On 2/12/19 10:35 AM, Chee, Tien Fong wrote:
> > > [...]
> > >
> > > > > my preference for the fit image would be
> > > > >
> > > > >
On Tue, 2019-02-12 at 05:49 -0800, Dalon L Westergreen wrote:
> On Tue, 2019-02-12 at 11:17 +0100, Marek Vasut wrote:
> >
> > On 2/12/19 11:13 AM, Chee, Tien Fong wrote:
> > >
> > > On Tue, 2019-02-12 at 10:43 +0100, Marek Vasut wrote:
> > > >
> > > > On 2/12/19 10:35 AM, Chee, Tien Fong wrote:
This patch synchronizes U-boot DT with kernel one
This is based on https://patchwork.kernel.org/cover/10797115/
This patch adds initial support of STM32MP157 discovery boards:
- Add support of stm32mp157a discovery1 board (part number: STM32MP157A-DK1).
This board embeds a STM32MP157a SOC
Add adc related nodes. These nodes are used to detect the
current supplied by USB type-C power in port on DK1 and DK2
boards.
Signed-off-by: Patrice Chotard
---
arch/arm/dts/stm32mp157-pinctrl.dtsi | 7 +++
arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 21 +
2 files
This series:
- Synchronizes DT with kernel one
- Adds STM32MP1 Discovery boards DK1 and DK2
- Adds power supply information at boot for DK1 and DK2 boards
Patrice Chotard (4):
ARM: dts: stm32: Synchronize DT with kernel one
board: stm32mp1: Update README file
Board: stm32mp1: Add
Change the size create a glitch in the clke signal on second
bank. The glitch can generate problem in memory initialiazation
Signed-off-by: Michael Trimarchi
---
arch/arm/mach-sunxi/dram_sun8i_a33.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/arch/arm/mach-sunxi/dram_sun8i_a33.c
Signed-off-by: Michael Trimarchi
---
arch/arm/mach-sunxi/dram_sun8i_a33.c | 8 ++--
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-sunxi/dram_sun8i_a33.c
b/arch/arm/mach-sunxi/dram_sun8i_a33.c
index 1da2727f98..83212aaddf 100644
---
Set two rank timing and exit self-refresh timing seems not done
properly. We know use the same write that we are using
on H5 silicon.
Signed-off-by: Michael Trimarchi
---
arch/arm/mach-sunxi/dram_sun8i_a33.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
Hi Igor,
On Tue, 12 Feb 2019 at 14:54, Igor Opaniuk wrote:
>
> Hi Tom, Simon,
>
> So I did a little investigation and found out that, the issue in that
> hcreate_r() invocation in the tee sandbox driver fails because the
> hashtable was allocated before.
> Debugging showed that the sandbox tee
Update README with DK1 and DK2 boards related informations
Signed-off-by: Patrice Chotard
---
board/st/stm32mp1/README | 23 +++
1 file changed, 23 insertions(+)
diff --git a/board/st/stm32mp1/README b/board/st/stm32mp1/README
index 72b28fabfc08..1cd3534ae4e7 100644
---
For DK1/DK2 boards, check if power supply provides enough current
to allow the board to boot correctly.
ADC@0 channel 18 and 19 are connected to USB type-C CC1 and CC2
signals. The table below shows the behavior for different range of
CC1 or CC2:
range | power supply | red led |
On Mon, Feb 11, 2019 at 09:40:17PM -0600, Adam Ford wrote:
> On Tue, Jan 29, 2019 at 7:36 AM Adam Ford wrote:
> >
> > On Mon, Jan 28, 2019 at 2:33 PM Tom Rini wrote:
> > >
> > > On Mon, Jan 28, 2019 at 02:23:00PM -0600, Adam Ford wrote:
> > > > On Mon, Jan 28, 2019 at 9:14 AM Tom Rini wrote:
>
On Tue, Feb 12, 2019 at 5:46 PM Andre Przywara wrote:
>
> On Tue, 12 Feb 2019 17:39:35 +0530
> Jagan Teki wrote:
>
> > On Tue, Feb 12, 2019 at 5:38 PM Andre Przywara
> > wrote:
> > >
> > > On Tue, 12 Feb 2019 17:30:44 +0530
> > > Jagan Teki wrote:
> > >
> > > > On Mon, Feb 11, 2019 at 8:26 AM
From: Tien Fong Chee
This function supports getting both data address and length for
existing FPGA subimage and FPGA external data.
Signed-off-by: Tien Fong Chee
---
cmd/fpga.c |6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/cmd/fpga.c b/cmd/fpga.c
index
Hi Jagan
> From: Jagan Teki
> Sent: samedi 9 février 2019 17:22
> Subject: Re: [PATCH v3] dm: spi: Read default speed and mode values from DT
>
> On Mon, Jan 28, 2019 at 2:37 PM Patrick Delaunay
> wrote:
> >
> > This patch update the behavior introduced by commit 96907c0fe50a ("dm:
> > spi:
> On 12.02.2019, at 13:38, David Wu wrote:
>
> Hi Philipp,
>
> 在 2019/2/10 上午2:24, Philipp Tomsich 写道:
>> That said, I have been fighting issues from this patchset when trying to read
>> from devices on the i2c0 bus on a RK3399—which had me add a “simple”
>> pinctrl device again, as pulling
On Tue, Feb 12, 2019 at 12:34:29PM +0100, Heinrich Schuchardt wrote:
> On 2/12/19 10:49 AM, Alexander Graf wrote:
> > On 02/03/2019 07:32 PM, Heinrich Schuchardt wrote:
> >> Hello Alex, hello Takahiro,
> >>
> >> this morning I met Daniel Thompson of Linaro. He thinks it would be
> >> quite
From: Tien Fong Chee
This function supports getting both data address and length for
existing FIT subimage and FIT external data.
Signed-off-by: Tien Fong Chee
---
cmd/ximg.c |6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/cmd/ximg.c b/cmd/ximg.c
index
Hi Chen-Yu,
On Tue, Feb 12, 2019 at 5:59 PM Chen-Yu Tsai wrote:
>
> On Tue, Feb 12, 2019 at 8:22 PM Jagan Teki wrote:
> >
> > On Tue, Feb 12, 2019 at 5:46 PM Andre Przywara
> > wrote:
> > >
> > > On Tue, 12 Feb 2019 17:39:35 +0530
> > > Jagan Teki wrote:
> > >
> > > > On Tue, Feb 12, 2019 at
On Tue, 12 Feb 2019 16:15:22 +0530
Jagan Teki wrote:
> On Tue, Feb 12, 2019 at 4:11 PM Andre Przywara wrote:
> >
> > We already have a driver for the SPI devices in older Allwinner CPUs.
> > Newer SoCs (SUN6I generation) have a similar, but improved IP block.
> > This series adds support for
This converts the following to Kconfig:
CONFIG_IP_DEFRAG
Signed-off-by: Christian Gmeiner
---
net/Kconfig | 6 ++
scripts/config_whitelist.txt | 1 -
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/net/Kconfig b/net/Kconfig
index f2363e5256..5f5f632469
On Tue, Feb 12, 2019 at 8:22 PM Jagan Teki wrote:
>
> On Tue, Feb 12, 2019 at 5:46 PM Andre Przywara wrote:
> >
> > On Tue, 12 Feb 2019 17:39:35 +0530
> > Jagan Teki wrote:
> >
> > > On Tue, Feb 12, 2019 at 5:38 PM Andre Przywara
> > > wrote:
> > > >
> > > > On Tue, 12 Feb 2019 17:30:44 +0530
Hi Philipp,
在 2019/2/10 上午2:24, Philipp Tomsich 写道:
That said, I have been fighting issues from this patchset when trying to read
from devices on the i2c0 bus on a RK3399—which had me add a “simple”
pinctrl device again, as pulling all the dependencies into the SPL is a pain.
I think you can
Enable usage of gdbserver for all sandbox targets (sandbox,
sandbox_flattree etc.).
Signed-off-by: Igor Opaniuk
---
test/py/conftest.py | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/test/py/conftest.py b/test/py/conftest.py
index 5c658b8..e40cbf0 100644
---
Hi Patrick,
You can refer to the mainline edk2 patch:
https://github.com/tianocore/edk2-platforms/commit/bf1c4a2cf8024669d1748e78c7e417433f85707e
Best regards,
Marcin
wt., 12 lut 2019 o 10:38 Alexander Graf napisał(a):
> On 02/04/2019 05:51 PM, Patrick Wildt wrote:
> > On Fri, Apr 06, 2018 at
Signed-off-by: Ismael Luceno
---
drivers/usb/host/usb-uclass.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/host/usb-uclass.c b/drivers/usb/host/usb-uclass.c
index 611ea97a72..0575f5393b 100644
--- a/drivers/usb/host/usb-uclass.c
+++
, Tegra30 Cardhu and
Tegra124 Jetson TK1 with the Linux next tree (20190212).
Reviewed-by: Stephen Warren
Just in case anyone else puzzles over this:
It took me too long to realize/remember why the following wasn't a
problem since the stack will overlap the initrd location:
-#define
Hi Tom, Simon,
So I did a little investigation and found out that, the issue in that
hcreate_r() invocation in the tee sandbox driver fails because the
hashtable was allocated before.
Debugging showed that the sandbox tee driver is probed twice every
time (although remove() is never called, it's
> On 12.02.2019, at 13:38, David Wu wrote:
>
> Hi Philipp,
>
> 在 2019/2/10 上午2:24, Philipp Tomsich 写道:
>> That said, I have been fighting issues from this patchset when trying to read
>> from devices on the i2c0 bus on a RK3399—which had me add a “simple”
>> pinctrl device again, as pulling
On 08/02/19 3:25 PM, Jean-Jacques Hiblot wrote:
> CONFIG_BLK can be safely enabled as DM_MMC and DM_USB are already enabled.
>
> Signed-off-by: Jean-Jacques Hiblot
> ---
>
Thanks for the patch!
Tested-by: Vignesh R
Tom,
This fix is required for booting kernel from MMC/SD on K2G boards.
On Tue, Feb 12, 2019 at 6:37 PM Chen-Yu Tsai wrote:
>
> On Tue, Feb 12, 2019 at 9:02 PM Jagan Teki wrote:
> >
> > Hi Chen-Yu,
> >
> > On Tue, Feb 12, 2019 at 5:59 PM Chen-Yu Tsai wrote:
> > >
> > > On Tue, Feb 12, 2019 at 8:22 PM Jagan Teki
> > > wrote:
> > > >
> > > > On Tue, Feb 12, 2019 at
On Tue, Feb 12, 2019 at 9:02 PM Jagan Teki wrote:
>
> Hi Chen-Yu,
>
> On Tue, Feb 12, 2019 at 5:59 PM Chen-Yu Tsai wrote:
> >
> > On Tue, Feb 12, 2019 at 8:22 PM Jagan Teki
> > wrote:
> > >
> > > On Tue, Feb 12, 2019 at 5:46 PM Andre Przywara
> > > wrote:
> > > >
> > > > On Tue, 12 Feb 2019
HI Andy,
On Tue, 12 Feb 2019 at 04:05, Andy Yan wrote:
>
> Hi Philipp:
>
> Sorry for the late reply, we just come back from the Chinese Spring
> Festival.
>
> On 2019/2/1 下午6:26, Philipp Tomsich wrote:
> > Kever,
> >
> > Independent of whether we revert this for the current cycle (and also
Hi Bin,
On Wed, 30 Jan 2019 at 04:59, Simon Glass wrote:
>
> At present SPL is used on 64-bit platforms, to allow SPL to be built as
> a 32-bit program and U-Boot proper to be built as 64-bit.
>
> However it is useful to be able to use SPL on any x86 platform, where
> U-Boot needs to be updated
with the Linux next tree (20190212).
Signed-off-by: Jonathan Hunter
---
include/configs/tegra114-common.h | 14 +++---
include/configs/tegra124-common.h | 14 +++---
include/configs/tegra20-common.h | 14 +++---
include/configs/tegra30-common.h | 14 +++---
4 files
From: Sjoerd Simons
If build into the SPL at least the MUSB USB driver needs the common usb
functionality (e.g. parsing of the DR role dt property), so build this.
Signed-off-by: Sjoerd Simons
---
scripts/Makefile.spl | 1 +
1 file changed, 1 insertion(+)
diff --git a/scripts/Makefile.spl
From: Sjoerd Simons
If the trcl mode register address cannot be found error out rather then
trying to continue (which cannot work)
Signed-off-by: Sjoerd Simons
---
drivers/usb/musb-new/ti-musb.c | 5 +
1 file changed, 5 insertions(+)
diff --git a/drivers/usb/musb-new/ti-musb.c
From: Martyn Welch
Despite the name it's also used for paths in distro configuration
files (i.e. extlinux.conf). When using OSTree, it is very easy to
reach the 127 character limit, thus increase to 256 bytes.
Signed-off-by: Martyn Welch
---
cmd/pxe.c | 2 +-
1 file changed, 1 insertion(+), 1
From: Sjoerd Simons
spl_usb depends on FAT support, so don't try to build it if fat support
is disabled for SPL.
Signed-off-by: Sjoerd Simons
---
common/spl/Makefile | 2 ++
1 file changed, 2 insertions(+)
diff --git a/common/spl/Makefile b/common/spl/Makefile
index e1daabf1e9c..42db0441559
On 11.02.19 22:40, Marek Vasut wrote:
Hi
On 2/11/19 9:10 PM, Oleksandr wrote:
[...]
Yes. I had to re-implement. Let me describe why.
From my understanding (I may mistake), the PSCI backend code which
lives
in secure section should be as lightweight as possible
and shouldn't call any
In efi_selftest we are in EFI land. We cannot call U-Boot library
functions malloc() and free() but should use the boot time services
instead.
Signed-off-by: Heinrich Schuchardt
---
There are still issues remaining in this test:
- not all allocated memory is freed
- variable ret used for
drivers/usb/musb-new/ti-musb.c: In function 'ti_musb_ofdata_to_platdata':
drivers/usb/musb-new/ti-musb.c:93:30: warning: comparison between pointer and
integer
if (platdata->ctrl_mod_base == FDT_ADDR_T_NONE) {}
Signed-off-by: Adrian Ratiu
---
drivers/usb/musb-new/ti-musb.c | 2 +-
1
This reverts commit 5ff776889212c080e3d1a33634ac904405ed6845.
As noted in the comment, the function pinctrl_decode_pin_config_dm()
only served as a temporary solution.
Since the function has no users anymore, we can remove it again.
Signed-off-by: Christoph Muellner
---
On 09.02.19 18:35, Marek Vasut wrote:
Hi
On 2/7/19 6:19 PM, Oleksandr wrote:
[...]
+ /* Update registers with correct frequency */
+ writel(freq, TIMER_BASE + TIMER_CNTFID0);
+ asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
+
+ /* Make sure arch
On Tue, Feb 12, 2019 at 1:20 PM Adam Ford wrote:
>
> On Sun, Feb 10, 2019 at 10:37 PM Vignesh R wrote:
> >
> >
> >
> > On 11/02/19 9:01 AM, Adam Ford wrote:
> > > On Tue, Feb 5, 2019 at 12:00 AM Vignesh R wrote:
> > >>
> > >> Switch spi_flash_* interfaces to call into new SPI NOR framework via
In efi_selftest we are in EFI land. We should not use U-Boot library
functions but boot time services for memory management.
Signed-off-by: Heinrich Schuchardt
---
lib/efi_selftest/efi_selftest_block_device.c | 2 +-
lib/efi_selftest/efi_selftest_startimage_exit.c | 2 +-
On Sun, Feb 10, 2019 at 10:37 PM Vignesh R wrote:
>
>
>
> On 11/02/19 9:01 AM, Adam Ford wrote:
> > On Tue, Feb 5, 2019 at 12:00 AM Vignesh R wrote:
> >>
> >> Switch spi_flash_* interfaces to call into new SPI NOR framework via MTD
> >> layer. Fix up sf_dataflash to work in legacy way. And
On Tue, Feb 12, 2019 at 12:05:55PM -0500, Tom Rini wrote:
> On Mon, Feb 11, 2019 at 09:40:17PM -0600, Adam Ford wrote:
> > On Tue, Jan 29, 2019 at 7:36 AM Adam Ford wrote:
> > >
> > > On Mon, Jan 28, 2019 at 2:33 PM Tom Rini wrote:
> > > >
> > > > On Mon, Jan 28, 2019 at 02:23:00PM -0600, Adam
Provide a unit test that calls LoadImage() with a file device path and
executes the application via StartImage().
Signed-off-by: Heinrich Schuchardt
---
v3
do not use library function efi_free_pool() but boot time service
v2
correct a comment
---
lib/efi_selftest/Makefile
On Sat, 9 Feb 2019 18:44:51 +0530
Jagan Teki wrote:
Hi,
> To drain rx fifo the fifo need to poll till the fifo
> count become empty.
>
> The current code is using wait_for_bit logic on control
> register with exchange burst mode mask, which is not a
> proper way of waiting for draining fifo.
On 09/02/2019 13:14, Jagan Teki wrote:
> Enable SUN4I_SPI by default for ARCH_SUNXI, so that board
> that would require to enable DM_SPI that eventually enable
> the SUN4I_SPI driver.
>
> Signed-off-by: Jagan Teki
> ---
> drivers/spi/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff
On Fri, Feb 08, 2019 at 07:13:21PM -0500, Tom Rini wrote:
> On Mon, Jan 28, 2019 at 05:13:55PM +0800, Shawn Guo wrote:
>
> > It adds the driver for HIGMACV300 Ethernet controller found on HiSilicon
> > SoCs like Hi3798CV200. It's based on a downstream U-Boot driver, but
> > quite a lot of code
On 13/02/19 1:54 AM, Adam Ford wrote:
> On Tue, Feb 12, 2019 at 1:20 PM Adam Ford wrote:
>>
>> On Sun, Feb 10, 2019 at 10:37 PM Vignesh R wrote:
>>>
>>>
>>>
>>> On 11/02/19 9:01 AM, Adam Ford wrote:
On Tue, Feb 5, 2019 at 12:00 AM Vignesh R wrote:
>
> Switch spi_flash_*
On Tue, 12 Feb 2019 at 21:45, Daniel Thompson
wrote:
>
> On Tue, Feb 12, 2019 at 12:34:29PM +0100, Heinrich Schuchardt wrote:
> > On 2/12/19 10:49 AM, Alexander Graf wrote:
> > > On 02/03/2019 07:32 PM, Heinrich Schuchardt wrote:
> > >> Hello Alex, hello Takahiro,
> > >>
> > >> this morning I met
On Wed, Feb 13, 2019 at 9:21 AM André Przywara wrote:
>
> On 09/02/2019 13:14, Jagan Teki wrote:
> > Add A31 spi controller support for existing sun4i_spi driver via driver
> > data, this would simply add A31 register along with proper register bits
> > via enum sets.
> >
> > Signed-off-by: Jagan
On Wed, Feb 13, 2019 at 7:01 AM Bin Meng wrote:
>
> On Tue, Feb 12, 2019 at 6:23 PM Andreas Schwab wrote:
> >
> > On Feb 12 2019, Bin Meng wrote:
> >
> > > The env var is stored in whatever supported media in U-Boot. Not like
> > > PCI NICs which normally have EEPROM to store pre-flashed MAC
+ tee-dev ML
On Tue, 12 Feb 2019 at 17:36, Alexander Graf wrote:
>
> On 02/12/2019 12:34 PM, Heinrich Schuchardt wrote:
> > On 2/12/19 10:49 AM, Alexander Graf wrote:
> >> On 02/03/2019 07:32 PM, Heinrich Schuchardt wrote:
> >>> Hello Alex, hello Takahiro,
> >>>
> >>> this morning I met Daniel
On Mon, Jan 21, 2019 at 12:26 PM wrote:
>
> On Wed, 16 Jan 2019 at 12:40, Simon Goldschmidt
> wrote:
> >
> > Improve some things in the documentation of OF_PLATDATA that I found
> > while porting socfgpa_gen5 to it.
Thanks for doing that. I actually learned a bit. :-)
This may be more
Anup Patel writes:
> From: Atish Patra
>
> The readme guide describes the procedure to build, flash and boot Linux
> using U-Boot on HiFive Unleashed. It also explains the current state of
> U-boot support and future action items.
>
> Signed-off-by: Atish Patra
> Signed-off-by: Anup Patel
>
On Tue, Feb 12, 2019 at 02:56:01PM +0800, Bin Meng wrote:
> Hi Tom,
>
> This PR includes the following changes to x86:
> - edison switch to CONFIG_OF_SEPARATE
> - tangier initial ACPI support for PMIC device
> - tsc timer driver update to support native calibration
> - fixes to 64-bit U-Boot
On Tue, Feb 12, 2019 at 02:28:15PM +0530, Faiz Abbas wrote:
> Make set_ios_post() return int to faciliate error handling in
> platform drivers.
>
> Signed-off-by: Faiz Abbas
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: PGP signature
On Sat, Jan 26, 2019 at 03:25:12PM +0100, Heinrich Schuchardt wrote:
> On x86_64 the size of the file u-boot loaded by the tftp test has grown in
> size such that when loading the file to 0x20 it overwrites a memory
> area reserved for PCI.
>
> If no load address is specified for tftp do not
On Tue, Feb 12, 2019 at 04:18:14PM +0200, Igor Opaniuk wrote:
> Enable usage of gdbserver for all sandbox targets (sandbox,
> sandbox_flattree etc.).
>
> Signed-off-by: Igor Opaniuk
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: PGP signature
On 09/02/2019 13:14, Jagan Teki wrote:
> Update the existing register writes using setbits_le32 and
> clrbits_le32 in required places.
>
> Signed-off-by: Jagan Teki
> ---
> drivers/spi/sun4i_spi.c | 21 -
> 1 file changed, 8 insertions(+), 13 deletions(-)
>
> diff --git
On 09/02/2019 13:14, Jagan Teki wrote:
> Allwinner support two different SPI controllers one for A10 and
> another for A31 with minimal changes in register offsets and
> respective register bits, but the logic for accessing the SPI
> master via SPI slave remains nearly similar.
>
> Add enum
On Tue, Feb 12, 2019 at 03:44:05PM -0600, Adam Ford wrote:
> On Tue, Feb 12, 2019 at 3:41 PM Scott Wood wrote:
> >
> > On Sun, 2019-02-10 at 07:48 -0600, Adam Ford wrote:
> > > On Sun, Feb 10, 2019 at 7:30 AM Adam Ford wrote:
> > > >
> > > > On Mon, Feb 4, 2019 at 12:17 PM Tim Harvey
> > > >
On 09/02/2019 13:14, Jagan Teki wrote:
> Add CLK support to enable AHB and MOD SPI clocks on sun4i_spi driver.
>
> Note, that the code will enable and disable clock in claim and release
> calls to make proper clock and reset handling between claiming and
> releasing SPI bus.
>
> Signed-off-by:
On 09/02/2019 13:14, Jagan Teki wrote:
> Add A31 spi controller support for existing sun4i_spi driver via driver
> data, this would simply add A31 register along with proper register bits
> via enum sets.
>
> Signed-off-by: Jagan Teki
> ---
> drivers/spi/Kconfig | 4 +-
>
On 09.02.19 18:37, Marek Vasut wrote:
Hi
diff --git a/arch/arm/mach-rmobile/Kconfig.32
b/arch/arm/mach-rmobile/Kconfig.32
index 076a019..a2e9e3d 100644
--- a/arch/arm/mach-rmobile/Kconfig.32
+++ b/arch/arm/mach-rmobile/Kconfig.32
@@ -76,6 +76,8 @@ config TARGET_LAGER
select
On Tue, Feb 12, 2019 at 3:41 PM Scott Wood wrote:
>
> On Sun, 2019-02-10 at 07:48 -0600, Adam Ford wrote:
> > On Sun, Feb 10, 2019 at 7:30 AM Adam Ford wrote:
> > >
> > > On Mon, Feb 4, 2019 at 12:17 PM Tim Harvey wrote:
> > > >
> > > > On Wed, Jan 2, 2019 at 6:37 PM Adam Ford wrote:
> > > > >
On 09/02/2019 13:14, Jagan Teki wrote:
> - Implement SPI AHB, MOD clocks via ccu_clk_gate for all
> supported Allwinner SoCs
> - Implement SPI resets via ccu_reset for all supported
> Allwinner SoCs.
>
> Signed-off-by: Jagan Teki
Reviewed-by: Andre Przywara
Cheers,
Andre.
> ---
>
Hi Simon,
On Tue, Feb 12, 2019 at 11:31 PM Simon Glass wrote:
>
> Hi Bin,
>
> On Wed, 30 Jan 2019 at 04:59, Simon Glass wrote:
> >
> > At present SPL is used on 64-bit platforms, to allow SPL to be built as
> > a 32-bit program and U-Boot proper to be built as 64-bit.
> >
> > However it is
On 09/02/2019 13:14, Jagan Teki wrote:
> - drop unused macros.
> - use base instead of base_addr, for better code readability
> - move .probe and .ofdata_to_platdata functions in required
> places to add platdata support in future.
> - use sentinel sun4i_spi_ids.
>
> Signed-off-by: Jagan Teki
On 09/02/2019 13:15, Jagan Teki wrote:
> Sopine has Winbond SPI flash, so enable the same to use
> flash on Sopine board.
>
> Signed-off-by: Jagan Teki
> ---
> arch/arm/dts/sun50i-a64-sopine-baseboard-u-boot.dtsi | 12
> configs/sopine_baseboard_defconfig | 4
On Sun, 2019-02-10 at 07:48 -0600, Adam Ford wrote:
> On Sun, Feb 10, 2019 at 7:30 AM Adam Ford wrote:
> >
> > On Mon, Feb 4, 2019 at 12:17 PM Tim Harvey wrote:
> > >
> > > On Wed, Jan 2, 2019 at 6:37 PM Adam Ford wrote:
> > > >
> > > > The LogicPD board uses a Micron Flash with ECC. To
> On Feb 12, 2019, at 4:18 PM, Kevin Hilman wrote:
>
> Anup Patel writes:
>
>> From: Atish Patra
>>
>> The readme guide describes the procedure to build, flash and boot Linux
>> using U-Boot on HiFive Unleashed. It also explains the current state of
>> U-boot support and future action
On Tue, Feb 12, 2019 at 6:23 PM Andreas Schwab wrote:
>
> On Feb 12 2019, Bin Meng wrote:
>
> > The env var is stored in whatever supported media in U-Boot. Not like
> > PCI NICs which normally have EEPROM to store pre-flashed MAC address
> > by their vendors, for most embedded network
On 09/02/2019 13:14, Jagan Teki wrote:
> Support fifo_depth via drvdata instead of macro definition, this would
> eventually reduce another macro definition for new SPI controller fifo
> depth support addition.
>
> Signed-off-by: Jagan Teki
Reviewed-by: Andre Przywara
Cheers,
Andre
> ---
>
On 13/02/19 00:05, Tom Rini wrote:
> On Tue, Feb 12, 2019 at 03:44:05PM -0600, Adam Ford wrote:
>> On Tue, Feb 12, 2019 at 3:41 PM Scott Wood wrote:
>>>
>>> On Sun, 2019-02-10 at 07:48 -0600, Adam Ford wrote:
On Sun, Feb 10, 2019 at 7:30 AM Adam Ford wrote:
>
> On Mon, Feb 4, 2019
Hi Tom,
On 12/02/19 2:28 PM, Faiz Abbas wrote:
> Add an API to continuously read a register until a condition is
> satisfied or a timeout occurs.
>
> Signed-off-by: Faiz Abbas
> Reviewed-by: Tom Rini
> ---
> include/regmap.h | 34 ++
> 1 file changed, 34
On 2/12/19 10:49 AM, Alexander Graf wrote:
> On 02/03/2019 07:32 PM, Heinrich Schuchardt wrote:
>> Hello Alex, hello Takahiro,
>>
>> this morning I met Daniel Thompson of Linaro. He thinks it would be
>> quite valuable if U-Boot would at least offer read access to EFI
>> variables at runtime.
>>
There are no higher 16 writing corresponding bits for pmu_gpio0's
iomux/drive/pull at rk3288, need to read the value from register
firstly. Add the flag to distinguish it from normal registers.
Signed-off-by: David Wu
---
drivers/pinctrl/rockchip/pinctrl-rk3288.c | 17 ++--
Hi Heinrich,
在 2019/2/10 上午12:39, Heinrich Schuchardt 写道:
On 2/9/19 4:24 PM, Philipp Tomsich wrote:
On 09.02.2019, at 16:08, Philipp Tomsich
wrote:
Heinrich,
My guess is that this is fallout from David Wu’s new pinctrl driver
(which has really been the bulk of changes in this cycle). I
> On 12.02.2019, at 12:51, David Wu wrote:
>
> There are no higher 16 writing corresponding bits for pmu_gpio0's
> iomux/drive/pull at rk3288, need to read the value from register
> firstly. Add the flag to distinguish it from normal registers.
>
> Signed-off-by: David Wu
> ---
>
On Mon, Feb 11, 2019 at 5:39 PM Tomas Novotny wrote:
>
> Hi Jagan,
>
> On Sat, 9 Feb 2019 21:47:12 +0530, Jagan Teki
> wrote:
> > On Tue, Feb 5, 2019 at 7:27 PM Tomas Novotny wrote:
> > >
> > > The dram chip on the tablet was changed. The new one requires a lower
> > > frequency, so change it.
On Mon, Feb 11, 2019 at 8:26 AM Chen-Yu Tsai wrote:
>
> On Sun, Feb 10, 2019 at 1:38 AM Jagan Teki wrote:
> >
> > On Fri, Jan 25, 2019 at 4:08 PM Chen-Yu Tsai wrote:
> > >
> > > As of commit aa8fee415f46 ("ARM: dts: sun8i: h3: Split out
> > > non-SoC-specific parts of Bananapi M2 Plus") in the
On 02/12/2019 12:34 PM, Heinrich Schuchardt wrote:
On 2/12/19 10:49 AM, Alexander Graf wrote:
On 02/03/2019 07:32 PM, Heinrich Schuchardt wrote:
Hello Alex, hello Takahiro,
this morning I met Daniel Thompson of Linaro. He thinks it would be
quite valuable if U-Boot would at least offer read
On Tue, Feb 12, 2019 at 1:31 PM Vignesh R wrote:
>
> Hi,
>
> On 09/02/19 5:45 PM, Jagan Teki wrote:
> > 1) CONFIG_SPI_FLASH is not just a legacy code, but it has common
> >core code which handle both dm and non-dm spi flash code. So
> >fix the info text to make it clear globally.
> >
> >
On Tue, Feb 12, 2019 at 1:27 PM Vignesh R wrote:
>
>
>
> On 09/02/19 5:45 PM, Jagan Teki wrote:
> > DM_SPI_FLASH should require spi flash interface code for dm
> > version, so select SPI_FLASH core by default if any board
> > enabled DM_SPI_FLASH.
> >
> > This overcome the explicit enablement of
On Tue, 12 Feb 2019 17:30:44 +0530
Jagan Teki wrote:
> On Mon, Feb 11, 2019 at 8:26 AM Chen-Yu Tsai wrote:
> >
> > On Sun, Feb 10, 2019 at 1:38 AM Jagan Teki
> > wrote:
> > >
> > > On Fri, Jan 25, 2019 at 4:08 PM Chen-Yu Tsai wrote:
> > > >
> > > > As of commit aa8fee415f46 ("ARM: dts:
On Tue, Feb 12, 2019 at 5:38 PM Andre Przywara wrote:
>
> On Tue, 12 Feb 2019 17:30:44 +0530
> Jagan Teki wrote:
>
> > On Mon, Feb 11, 2019 at 8:26 AM Chen-Yu Tsai wrote:
> > >
> > > On Sun, Feb 10, 2019 at 1:38 AM Jagan Teki
> > > wrote:
> > > >
> > > > On Fri, Jan 25, 2019 at 4:08 PM
On Tue, 12 Feb 2019 17:39:35 +0530
Jagan Teki wrote:
> On Tue, Feb 12, 2019 at 5:38 PM Andre Przywara wrote:
> >
> > On Tue, 12 Feb 2019 17:30:44 +0530
> > Jagan Teki wrote:
> >
> > > On Mon, Feb 11, 2019 at 8:26 AM Chen-Yu Tsai wrote:
> > > >
> > > > On Sun, Feb 10, 2019 at 1:38 AM Jagan
On 08.02.2019 19:26, Carlo Caione wrote:
> Switch to use the generic helpers to access the MMD registers so that we
> can used the same command also for C45 PHYs, C22 PHYs with direct and
> indirect access and PHYs implementing a custom way to access the
> registers.
>
> Signed-off-by: Carlo
On 09/02/19 5:45 PM, Jagan Teki wrote:
> CONFIG_SPI is mandatory for SPI support even if the given board
> has dm or non-dm versions, so mark CONFIG_SPI as non-dm config
> option and move the respective non-dm drivers below to that.
>
> This eventually reduce the explicit CONFIG_SPI enablement
From: "Ang, Chee Hong"
Currently u-boot only support standard PSCI functions for power management
and lack of convenient method to allow the users to extend the PSCI functions
to support platform specific services. Most of the u-boot users still rely
on ATF (ARM Trusted Firmware) to handle the
From: "Ang, Chee Hong"
When PSCI is enabled, we are expecting U-Boot which now act
as EL3 software will handle all the PSCI calls. We won't need
fwcall as no further HVC or SMC are needed.
Signed-off-by: Ang, Chee Hong
---
arch/arm/cpu/armv8/Makefile | 2 ++
1 file changed, 2 insertions(+)
From: Chee Hong Ang
Allow PSCI layer to handle any SiP service functions added by
platform vendors. PSCI layer will look for SiP service function
in the SiP function table located in '._secure_svc_tbl_entries'
section if the SMC function identifier is not found in the PSCI
standard functions
On Sat, Feb 09, 2019 at 05:04:19PM -0600, Simon Glass wrote:
> Hi Takahiro,
>
> On Fri, 8 Feb 2019 at 02:14, AKASHI Takahiro
> wrote:
> >
> > # bootefi doesn't work with this patch set yet
> >
> > This patch set came from the past discussion[1] on my "removable device
> > support" patch and is
Hi,
On 09/02/19 5:45 PM, Jagan Teki wrote:
> 1) CONFIG_SPI_FLASH is not just a legacy code, but it has common
>core code which handle both dm and non-dm spi flash code. So
>fix the info text to make it clear globally.
>
> 2) Since it's flash core it shouldn't depends on legacy SPI,
>
Simon,
On Sat, Feb 09, 2019 at 01:08:10PM -0700, Simon Glass wrote:
> Hi,
>
> On Fri, 8 Feb 2019 at 01:14, AKASHI Takahiro
> wrote:
> >
> > # bootefi doesn't work with this patch set yet
> >
> > This patch set came from the past discussion[1] on my "removable device
> > support" patch and is
1 - 100 of 138 matches
Mail list logo