Some drivers define their own speed enums and use their own constants for
speed. It makes sense to have a unified defition of the different speeds.
Since many controllers have to do different things for fast/high speed, it
is a good idea to have an enum for the mode.
Add these as well as an enum
The DSPI node of DTS in kernel is spi, so fix the "/soc/dspi@"
ot "/soc/spi@".
The DSPI2 and I2C5 is muxed, and the DSPI2 default status is okay,
so must set the DSPI2 status is disabled if the pin use to I2C5.
Signed-off-by: Xiaowei Bao
---
board/freescale/lx2160a/lx2160a.c | 12 +++-
Bring in this file from Linux v5.4.
Signed-off-by: Simon Glass
---
Changes in v2: None
.../i2c/i2c-designware.txt| 73 +++
1 file changed, 73 insertions(+)
create mode 100644 doc/device-tree-bindings/i2c/i2c-designware.txt
diff --git
Commit 27c3f70f3b50 ("net: phy: Increase link up delay in
genphy_update_link()") increased the per-iteration waiting time from
1ms to 50ms, without adjusting the timeout counter. This lead to the
timeout increasing from the typical 4 seconds to over three minutes.
Adjust the timeout counter
Hi Pragnesh,
On Tue, Dec 31, 2019 at 10:00 PM Pragnesh Patel
wrote:
>
> Added headers needed by upcoming SPL support of FU540.
>
> This headers are leveraged from FSBL
> (https://github.com/sifive/freedom-u540-c000-bootloader.git)
>
> Signed-off-by: Pragnesh Patel
> ---
>
Hi,
I'm facing a strange problem that took quite a while to analyze.
I'm porting U-Boot to a new board and thus some problem is expected.
I am also trying to configure U-Boot in a useful (for my purposes) way.
I decided to switch Environment storage from SPI NOR to SD card (in a
file in FAT
This is v6 set for Binman support in rockchip, [1] here is
previous patchset.
This series add single boot image with binman for arm32 and
pad_cat for arm64 rockchip platforms both TPL + SPL and SPL-alone
targets.
Changes for v6:
- drop idbloader.img filename change patch
- update rockchip.rst to
On 1/2/20 1:30 PM, Stefan Roese wrote:
> Hi Mauro,
>
> On 30.12.19 13:14, Mauro Condarelli wrote:
>>
>>
>> On 12/30/19 11:22 AM, Daniel Schwierzeck wrote:
>>>
>>> Am 30.12.19 um 10:19 schrieb Mauro Condarelli:
I am having problems with this patch.
Problem is "reset"command fails
On 03.01.20 23:08, Andre Przywara wrote:
Commit 27c3f70f3b50 ("net: phy: Increase link up delay in
genphy_update_link()") increased the per-iteration waiting time from
1ms to 50ms, without adjusting the timeout counter. This lead to the
timeout increasing from the typical 4 seconds to over three
On 1/2/20 12:28 PM, Tuomas Tynkkynen wrote:
Hi Heinrich,
On Wed, 1 Jan 2020 at 19:58, Heinrich Schuchardt wrote:
Dear all,
I want to run qemu_arm64_defconfig with 4G.
qemu-system-aarch64 -machine virt -m 4G -smp cores=2 \
-bios u-boot.bin -cpu cortex-a53 -nographic -gdb tcp::1234
Does anyone with a da850/l-138/am1808 have any issues with MMC on their board?
I haven't bisected it yet and only I found it by accident.
U-Boot SPL 2020.01-rc5-00073-g4b75aa5aa7 (Jan 03 2020 - 09:08:17 -0600)
Trying to boot from SPI
U-Boot 2020.01-rc5-00073-g4b75aa5aa7 (Jan 03 2020 -
Hi Jagan, Michael,
On 31/12/19 07:21, Jagan Teki wrote:
> On Mon, Dec 30, 2019 at 10:55 PM Michael Nazzareno Trimarchi
> wrote:
>>
>> Hi
>>
>> On Mon, Dec 30, 2019 at 1:04 PM Jagan Teki
>> wrote:
>>>
>>> From: Michael Trimarchi
>>>
>>> LAN8720 needs a reset of every clock enable. The reset
Add rockchip image type support. right now the image
type marked with rksd, So create image type variable
with required image type like rksd or rkspi.
Cc: Kever Yang
Cc: Matwey V. Kornilov
Signed-off-by: Jagan Teki
Reviewed-by: Kever Yang
---
Makefile | 10 +-
1 file changed, 9
The dts node of the DSPI controller in kernel is spi instead of dspi,
it is not correct if use "/soc/dspi@" to fix up the status of the dts
in kernel, so, modify it to "/soc/spi@".
The DSPI2 and I2C5 are muxed, and the status of DSPI2 node in kernel dts
default value is okay, set the status of
Hi Stefano,
On 1/3/20 12:39 PM, Stefano Babic wrote:
Hi Giulio,
On 04/12/19 18:44, Giulio Benetti wrote:
This patchset add support for i.MXRT family starting from i.MXRT1050 SoC.
It provides:
- i.MXRT1050 SoC entry
- i.MXRT pinctrl driver
- i.MXRT serial driver tweaking
- i.MXRT sdram
Hi Giulio,
On 04/12/19 18:44, Giulio Benetti wrote:
> This patchset add support for i.MXRT family starting from i.MXRT1050 SoC.
> It provides:
> - i.MXRT1050 SoC entry
> - i.MXRT pinctrl driver
> - i.MXRT serial driver tweaking
> - i.MXRT sdram controller driver
> - i.MXRT usdhc driver tweaking
>
On Thu, Nov 14, 2019 at 9:10 AM Bartosz Golaszewski wrote:
>
> From: Bartosz Golaszewski
>
> struct mmc_config & struct mmc don't need to be exported over platform
> data, but can instead be private in the driver.
>
> Remove struct davinci_mmc_plat.
This patch appears to break the da850-evm.
Update this driver to use the new standard enums for speed.
Signed-off-by: Simon Glass
---
Changes in v2: None
drivers/i2c/ast_i2c.c | 2 +-
drivers/i2c/ast_i2c.h | 2 --
2 files changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/i2c/ast_i2c.c b/drivers/i2c/ast_i2c.c
index
> From: Frieder Schrempf
> In cases when the same SPL should run on boards with i.MX8MM, that
> differ in DDR configuration, it is necessary to try different
> parameters and check if the training done by the firmware suceeds or
> not.
> Therefore we return the DDR training/initialization success
> When pmic_get() is used with DM the first parameter must be
> the complete node name plus the unit address, so fix it
> accordingly.
> Reported-by: Igor Opaniuk
> Signed-off-by: Fabio Estevam
> Reviewed-by: Peng Fan
Applied to u-boot-imx, -next, thanks !
Best regards,
Stefano Babic
--
> The data sheet says that the DIV field cannot change while the CLKGATE
> bit is set or modified. So do it a little more carefully, by first
> clearing the bit, waiting for that to appear, then setting the DIV
> field.
> Signed-off-by: Rasmus Villemoes
Applied to u-boot-imx, -next, thanks !
> I tried clearing a bit by writing to hw_clkctrl_gpmi_clr, then
> busy-waiting for it to actually clear. My board hung. The data sheet
> agrees, these registers do not have _set, _clr, _tog, so fix up the
> definitions. git grep -E 'clkctrl_(gpmi|ssp[0-9])_' says that nobody
> uses those
> From: Igor Opaniuk
> Currently imx-specific bootaux command doesn't support ELF format
> firmware for Cortex-M4 core.
> This patches introduces a PoC implementation of handling elf firmware
> (load_elf_image_phdr() was copy-pasted from elf.c just for PoC).
> ELF64 binaries isn't supported yet.
On 1/2/20 6:05 PM, Stephen Warren wrote:
On 12/31/19 3:42 AM, Cristian Ciocaltea wrote:
On Mon, Dec 30, 2019 at 09:03:38PM +0100, Heinrich Schuchardt wrote:
On 12/30/19 8:32 PM, Stephen Warren wrote:
On 12/30/19 12:05 PM, Heinrich Schuchardt wrote:
On 12/30/19 5:38 PM, Stephen Warren wrote:
When be launch a binary via bootefi the bootargs environment variable is
used to set the load options in the loaded image protocol.
Free memory allocated for load options when the UEFI binary exits.
Signed-off-by: Heinrich Schuchardt
---
cmd/bootefi.c | 53
Hi Rasmus,
On 27/09/19 10:33, Rasmus Villemoes wrote:
> On 12/09/2019 11.17, Rasmus Villemoes wrote:
>> While trying to implement an mxs_set_gpmiclk() I stumbled on a few minor
>> things.
>>
>> Rasmus Villemoes (4):
>> arm: mxs: fix register definitions for clkctrl_gpmi and clkctrl_sspX
>>
Hi Tom,
Please pull the rockchip updates/fixes:
- Fix latest mainline kernel for rk3308
- Update rk3288-evb config to suport OP-TEE
- Fix for firefly-px30 DEBUG_UART channel and make it standalone
- Script make_fit_atf add python3 support
- Fix rk3328 timer with correct COUNTER_FREQUENCY
- Fix
Hi Simon,
On Fri, Jan 3, 2020 at 10:30 AM Simon Glass wrote:
>
> Hi Anatolij,
>
> On Thu, 2 Jan 2020 at 07:34, Anatolij Gustschin wrote:
> >
> > Hi Simon,
> >
> > On Fri, 20 Dec 2019 18:10:33 -0700
> > Simon Glass s...@chromium.org wrote:
> >
> > > Most x86 boards that use video make use of
Group these #defines into an enum to make it easier to understand the
relationship between them.
Signed-off-by: Simon Glass
---
Changes in v2: None
drivers/i2c/designware_i2c.c | 2 +-
drivers/i2c/designware_i2c.h | 10 +++---
2 files changed, 8 insertions(+), 4 deletions(-)
diff --git
On Thu, Jan 02, 2020 at 04:34:23PM +0800, Kever Yang wrote:
> Hi Tom,
>
> Please pull the rockchip updates/fixes:
> - Fix latest mainline kernel for rk3308
> - Update rk3288-evb config to suport OP-TEE
> - Fix for firefly-px30 DEBUG_UART channel and make it standalone
> - Script make_fit_atf add
Hi Tom,
On Thu, 2 Jan 2020 at 19:27, Simon Glass wrote:
>
> Hi Tom,
>
> On Thu, 2 Jan 2020 at 16:11, Tom Rini wrote:
> >
> > On Tue, Dec 31, 2019 at 02:28:19PM -0700, Simon Glass wrote:
> > > Hi Matthias,
> > >
> > > On Tue, 10 Dec 2019 at 02:43, Matthias Brugger wrote:
> > > >
> > > > Hi
HI all
I'm trying to work on some imx8mm mainline but I understand that I
miss some of the information needed. I would like
to work and play with power domain. Can I know where to find all the
information to build a version with a valid combination?
Michael
--
| Michael Nazzareno Trimarchi
On Fri, Jan 03, 2020 at 05:50:38PM +0100, Bartosz Golaszewski wrote:
> pt., 3 sty 2020 o 17:01 Adam Ford napisał(a):
> >
> > On Thu, Nov 14, 2019 at 9:10 AM Bartosz Golaszewski wrote:
> > >
> > > From: Bartosz Golaszewski
> > >
> > > struct mmc_config & struct mmc don't need to be exported over
Hi Pragnesh,
On Tue, Dec 31, 2019 at 2:31 PM Pragnesh Patel
wrote:
>
> Added FU540 place-holder so that SoC specific values
> will be kept here.
It looks only clk.h is the placer-holder. gpio.h is not.
Can you please split the gpio.h changes to another patch?
>
> Signed-off-by: Pragnesh Patel
On Tue, Dec 31, 2019 at 1:34 PM Matwey V. Kornilov
wrote:
>
> вт, 31 дек. 2019 г. в 10:54, Matwey V. Kornilov :
> >
> > пн, 30 дек. 2019 г. в 11:28, Jagan Teki :
> > >
> > > All rockchip platforms support TPL or SPL-based bootloader
> > > in mainline with U-Boot proper as final stage. For each
>
Convert the obvious uses of i2c bus speeds to use the enum.
Use livetree access for code changes.
Signed-off-by: Simon Glass
---
Changes in v2: None
drivers/i2c/exynos_hs_i2c.c | 4 ++--
drivers/i2c/fsl_i2c.c| 3 ++-
drivers/i2c/i2c-cdns.c | 2 +-
drivers/i2c/i2c-uclass.c
Some versions of this peripherals provide more control of the bus
behaviour. Add definitions for these registers.
Signed-off-by: Simon Glass
Reviewed-by: Ley Foon Tan
Reviewed-by: Jun Chen
---
Changes in v2:
- Fix 'previde' typo
drivers/i2c/designware_i2c.h | 13 -
1 file
On Tue, Dec 31, 2019 at 02:28:19PM -0700, Simon Glass wrote:
> Hi Matthias,
>
> On Tue, 10 Dec 2019 at 02:43, Matthias Brugger wrote:
> >
> > Hi Simon,
> >
> > On 02/12/2019 16:45, Tom Rini wrote:
> > > On Sun, Dec 01, 2019 at 07:33:56PM -0700, Simon Glass wrote:
> > >
> > >> At present the
Hi
Never mind. I figure it out
CONFIG_SPL_DM_SEQ_ALIAS=y
Michael
On Sat, Jan 4, 2020 at 1:44 PM Michael Nazzareno Trimarchi
wrote:
>
> Hi Simon
>
> U-Boot SPL 2020.01-rc5-00071-g82f6f6e4e4-dirty (Jan 04 2020 - 13:39:54 +0100)
> spl_early_init
> i2c_uclass_init: highest alias id is 2
>
The source conf for clearfrog appears absent of GPT support albeit there
should not be space concern for that target, if that is the reason.
Owning such device I took me some effort and time to figure out why the
device would not boot from a GPT partition but only from legacy MBR.
Thus I would
Hi Heinrich,
On Sat, Jan 4, 2020 at 8:25 AM Heinrich Schuchardt wrote:
>
> Of all warning status codes up to now only EFI_WARN_DELETE_FAILURE is
> defined.
>
> The patch adds the missing definitions for later usage.
>
> Signed-off-by: Heinrich Schuchardt
> ---
> .mailmap | 1 +
>
Hi,
After the following commit I have problems with my rock64 SBCs:
commit 893b4d0df4deb802480aeb606d3b0aa2d0ea27d8
Author: Ben Wolsieffer
Date: Tue Dec 3 00:24:31 2019 -0500
rockchip: rk3328: rock64: enable CONFIG_MISC_INIT_R
This commit in current form results in identical cpuid and
On 4/19/19 5:22 AM, AKASHI Takahiro wrote:
There are several reasons that I want to rework/refactor bootefi command
as well as bootmgr:
* Some previous commits on bootefi.c have made the code complicated
and a bit hard to understand.
* do_bootefi_exec() would better be implemented using
On 03/01/2020 13.42, Stefano Babic wrote:
> Hi Rasmus,
>
> On 27/09/19 10:33, Rasmus Villemoes wrote:
>> On 12/09/2019 11.17, Rasmus Villemoes wrote:
>>> While trying to implement an mxs_set_gpmiclk() I stumbled on a few minor
>>> things.
>>>
>>> Rasmus Villemoes (4):
>>> arm: mxs: fix
I would like to implement an update system (most likely using SWUpdate)
"Double copy with fall-back" and, possibly a "last resort" recovery.
I have pretty clear what should be the program flow, but I don't know
how to implement it in U-Boot.
In particular:
* How can I determine, in U-Boot, if
Hi Simon,
On Fri, Jan 3, 2020 at 11:24 AM Simon Glass wrote:
>
> Hi Bin,
>
> On Thu, 2 Jan 2020 at 19:41, Bin Meng wrote:
> >
> > Hi Simon,
> >
> > On Fri, Jan 3, 2020 at 10:30 AM Simon Glass wrote:
> > >
> > > Hi Anatolij,
> > >
> > > On Thu, 2 Jan 2020 at 07:34, Anatolij Gustschin wrote:
>
Hi Mauro,
On 30.12.19 13:14, Mauro Condarelli wrote:
On 12/30/19 11:22 AM, Daniel Schwierzeck wrote:
Am 30.12.19 um 10:19 schrieb Mauro Condarelli:
I am having problems with this patch.
Problem is "reset"command fails (for my board) with:
=> reset
resetting ...
### ERROR ### Please RESET
We use struct clk here so really should include this header file to avoid
build errors. Also switch the order of clk.h in the C file to match the
required code style.
Signed-off-by: Simon Glass
Reviewed-by: Ley Foon Tan
---
Changes in v2: None
drivers/i2c/designware_i2c.c | 2 +-
Update this driver to use the new standard enums for speed.
Signed-off-by: Simon Glass
---
Changes in v2: None
drivers/i2c/designware_i2c.c | 10 +-
drivers/i2c/designware_i2c.h | 13 -
2 files changed, 5 insertions(+), 18 deletions(-)
diff --git
On Fri, Jan 3, 2020 at 12:17 PM Tom Rini wrote:
>
> Adam Ford reports that this change breaks booting on da850-evm and
> Bartosz Golaszewski agrees that with the impending release we should
> revert the change for now. With that noted:
>
Is patchwork working? I tried to go there and I am not
On Sun, Dec 29, 2019 at 01:47:32PM +0100, Dario Binacchi wrote:
> As described in doc/README.asn1 document the tools/asn1_compiler is used
> to "generate bytecode as a C file (*.asn1.[ch]) from *.asn1 file".
>
> Signed-off-by: Dario Binacchi
Applied to u-boot/master, thanks!
--
Tom
Rockchip has documentation file, doc/README.rockchip but
which is not so readable to add or understand the existing
contents. Even the format that support is legacy readme
in U-Boot.
Add rockchip specific documentation file using new rst
format, which describes the information about Rockchip
On Thu, Jan 02, 2020 at 07:28:50PM -0700, Simon Glass wrote:
> Hi Tom,
>
> On Thu, 2 Jan 2020 at 19:27, Simon Glass wrote:
> >
> > Hi Tom,
> >
> > On Thu, 2 Jan 2020 at 16:11, Tom Rini wrote:
> > >
> > > On Tue, Dec 31, 2019 at 02:28:19PM -0700, Simon Glass wrote:
> > > > Hi Matthias,
> > > >
>
Hi all,
On Fri, 3 Jan 2020 23:41:49 +0800
Bin Meng bmeng...@gmail.com wrote:
> Hi Simon,
>
> On Fri, Jan 3, 2020 at 11:24 AM Simon Glass wrote:
> >
> > Hi Bin,
> >
> > On Thu, 2 Jan 2020 at 19:41, Bin Meng wrote:
> > >
> > > Hi Simon,
> > >
> > > On Fri, Jan 3, 2020 at 10:30 AM Simon Glass
Most of the platforms uses the platform type on their boot
stage image naming conventions in makefile like,
u-boot-x86-start16-tpl.bin - x86 start16 TPL bin
u-boot-spl-mtk.bin - Mediatek SPL bin
This would help to understand the users to what that
particular image belongs to? and less confused.
Update this driver to use the new standard enums for speed.
Note: This driver needs to move to driver model.
Signed-off-by: Simon Glass
---
Changes in v2: None
drivers/i2c/omap24xx_i2c.c | 2 +-
drivers/i2c/omap24xx_i2c.h | 4
2 files changed, 1 insertion(+), 5 deletions(-)
diff --git
Instead of passing this parameter into __dw_i2c_set_bus_speed(), pass in
the driver's private data, from which the function can obtain that
information. This allows the function to have access to the full state of
the driver.
Signed-off-by: Simon Glass
---
Changes in v2: None
On Tue, 31 Dec 2019 18:09:14 +0100
Dario Binacchi dario...@libero.it wrote:
> drivers/video/fonts/.gitignore | 1 +
> 1 file changed, 1 insertion(+)
> create mode 100644 drivers/video/fonts/.gitignore
Applied to u-boot-video/master, thanks!
--
Anatolij
Update this driver to use the new standard enums for speed.
Note: This driver needs to move to driver model.
Signed-off-by: Simon Glass
---
Changes in v2: None
drivers/i2c/stm32f7_i2c.c | 43 +++
1 file changed, 16 insertions(+), 27 deletions(-)
diff
Hi Simon,
On Fri, 20 Dec 2019 18:10:32 -0700
Simon Glass s...@chromium.org wrote:
...
> Simon Glass (5):
> video: x86: Enable 32-bit graphics by default
> video: Avoid using #ifdef in video blitting code
> video: Avoid using #ifdef in console_rotate.c
> video: Avoid using #ifdef in
On Fri, Dec 27, 2019 at 07:46:30AM -0700, Simon Glass wrote:
> This test currently does not run because it specifies the sandbox board
> instead of sandbox_spl. Fix it.
>
> Signed-off-by: Simon Glass
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Fri, Jan 3, 2020 at 12:17 PM Tom Rini wrote:
>
> Adam Ford reports that this change breaks booting on da850-evm and
> Bartosz Golaszewski agrees that with the impending release we should
> revert the change for now. With that noted:
>
> This reverts commit
If a different input clock is required then the correct way to do this is
with a clock driver. Don't allow boards to override IC_CLK.
Signed-off-by: Simon Glass
---
Changes in v2: None
drivers/i2c/designware_i2c.h | 2 --
1 file changed, 2 deletions(-)
diff --git
Some SoCs support a higher speed than what is currently called 'max' in
this driver. Rename it to 'high' speed, which is the official name of the
3.4MHz speed.
Signed-off-by: Simon Glass
---
Changes in v2: None
drivers/i2c/designware_i2c.c | 10 +-
drivers/i2c/designware_i2c.h | 8
Adam Ford reports that this change breaks booting on da850-evm and
Bartosz Golaszewski agrees that with the impending release we should
revert the change for now. With that noted:
This reverts commit 21a4d80a710c79053ac1deaa65ff9b69e6c031d4.
Cc: Adam Ford
Cc: Bartosz Golaszewski
On Wed, Dec 25, 2019 at 06:34:07AM -0500, Robert P. J. Day wrote:
> Various (mostly minor) spelling, grammar and punctuation tweaks for
> arch/arm/Kconfig.
>
> Signed-off-by: Robert P. J. Day
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index f9dab073ea..36c9c2fecd 100644
Applied to
Hi Stefano,
On Fri, Jan 3, 2020 at 5:03 PM Stefano Babic wrote:
>
> Hi Jagan, Michael,
>
> On 31/12/19 07:21, Jagan Teki wrote:
> > On Mon, Dec 30, 2019 at 10:55 PM Michael Nazzareno Trimarchi
> > wrote:
> >>
> >> Hi
> >>
> >> On Mon, Dec 30, 2019 at 1:04 PM Jagan Teki
> >> wrote:
> >>>
> >>>
On Wed, 1 Jan 2020 at 07:52, Heinrich Schuchardt wrote:
>
> Correct some function comments. Convert to Sphinx style.
>
> Signed-off-by: Heinrich Schuchardt
> ---
> lib/trace.c | 54 +++--
> 1 file changed, 36 insertions(+), 18 deletions(-)
>
The i2c controller defines a few timing properties. Read these in and
store them for use by the driver.
Signed-off-by: Simon Glass
---
Changes in v2: None
drivers/i2c/designware_i2c.c | 8 ++--
drivers/i2c/designware_i2c.h | 15 +++
drivers/i2c/designware_i2c_pci.c |
Some versions of this peripheral include a spike-suppression phase of the
bus. Add support for this.
Signed-off-by: Simon Glass
---
Changes in v2:
- Add a few more clean-up patches for i2c
drivers/i2c/designware_i2c.c | 10 +-
drivers/i2c/designware_i2c.h | 2 ++
Create a struct to hold the three timing parameters. This will make it
easier to move these calculations into a separate function in a later
patch.
Signed-off-by: Simon Glass
---
Changes in v2: None
drivers/i2c/designware_i2c.c | 82
1 file changed, 55
Hi Stefano,
Sorry for the delay,
Le 28/12/2019 à 12:31, Stefano Babic a écrit :
Hi Joris,
On 08/12/19 18:02, Joris Offouga wrote:
Signed-off-by: Joris Offouga
---
board/technexion/pico-imx7d/pico-imx7d.c | 46
configs/pico-dwarf-imx7d_defconfig | 5 +++
At present the driver can end up with timing parameters which are slightly
faster than those expected. It is possible to optimise the parameters to
get the best possible result.
Create a new function to handle the timing calculation. This uses a table
of defaults for each speed mode rather than
pt., 3 sty 2020 o 17:01 Adam Ford napisał(a):
>
> On Thu, Nov 14, 2019 at 9:10 AM Bartosz Golaszewski wrote:
> >
> > From: Bartosz Golaszewski
> >
> > struct mmc_config & struct mmc don't need to be exported over platform
> > data, but can instead be private in the driver.
> >
> > Remove struct
Hi Simon
U-Boot SPL 2020.01-rc5-00071-g82f6f6e4e4-dirty (Jan 04 2020 - 13:39:54 +0100)
spl_early_init
i2c_uclass_init: highest alias id is 2
i2c_post_bind: i2c@30a2, req_seq=-1
i2c_post_bind: i2c@30a2, new req_seq=3
i2c_post_bind: i2c@30a4, req_seq=-1
i2c_post_bind: i2c@30a4, new
On Tue, Dec 17, 2019 at 02:48:54PM +0200, Igor Opaniuk wrote:
> My address at Linaro doesn't exist anymore, so people
> keep getting mail delivery error responses. Map this address
> to the actual one.
>
> Signed-off-by: Igor Opaniuk
> Reviewed-by: Oleksandr Suvorov
Applied to u-boot/master,
The following patches
1) Introduce the emmc based board detection for BBAI due to a lack of
eeprom onboard the BBAI (to be fixed in future revision of the board).
2) Add structures in the pinctrl to detect the beaglebone AI and add checks for
the beaglebone AI in the board detection scheme
3)
Hi Anatolij,
On Thu, 2 Jan 2020 at 07:34, Anatolij Gustschin wrote:
>
> Hi Simon,
>
> On Fri, 20 Dec 2019 18:10:33 -0700
> Simon Glass s...@chromium.org wrote:
>
> > Most x86 boards that use video make use of 32bpp graphics. Enable this by
> > default. This fixes missing graphics output on some
On 12/31/19 3:42 AM, Cristian Ciocaltea wrote:
On Mon, Dec 30, 2019 at 09:03:38PM +0100, Heinrich Schuchardt wrote:
On 12/30/19 8:32 PM, Stephen Warren wrote:
On 12/30/19 12:05 PM, Heinrich Schuchardt wrote:
On 12/30/19 5:38 PM, Stephen Warren wrote:
On 12/30/19 3:52 AM, Heinrich Schuchardt
At present the driver uses an approximation for the bus clock, e.g. 166MHz
instead of 166 2/3 MHz.
This can result in small errors in the resulting I2C speed, perhaps 0.5%
or so.
Adjust the existing code to start from the accurate figure, even if later
rounding reduces this accuracy.
Update the
Hi Igor,
On 27/12/19 10:23, Igor Opaniuk wrote:
> Hi Breno,
>
> On Mon, Dec 23, 2019 at 7:07 PM Breno Matheus Lima
> wrote:
>>
>> Hi Igor,
>>
>> Em qui., 19 de dez. de 2019 às 07:55, Igor Opaniuk
>> escreveu:
>>>
>>> From: Igor Opaniuk
>>>
>>> Currently Colibri iMX7 NAND version doesn't boot
Add U-Boot specific dtsi file for rk3036 SoC. This
would help to add U-Boot specific dts nodes, properties
which are common across rk3036.
Right now, the file is empty, will add required changes
in future patches.
Signed-off-by: Jagan Teki
Reviewed-by: Kever Yang
---
Add SPL-alone mkimage tooling support via Makefile for
few platforms or boards used in rockchip family.
With this users would get rid of explicitly creating
mkimage tool for rockchip rksd or rkspi boot modes.
Signed-off-by: Jagan Teki
Reviewed-by: Kever Yang
---
Makefile | 10 +-
1
On Wed, Dec 25, 2019 at 1:27 PM Sean Anderson wrote:
>
> When debugging, it can be helpful to see more information about an
> unhandled exception. This patch adds an option to view the registers at
> the time of the trap, similar to the linux output on a kernel panic.
>
> Signed-off-by: Sean
This series updates the Designware I2C driver to support reading its
timing from the device tree and handling it in units of nanoseconds
instead of clock cycles.
A new function converts from nanoseconds to the units used by the I2C
controller and makes sure that the requested bus speed is not
All rockchip platforms support TPL or SPL-based bootloader
in mainline with U-Boot proper as final stage. For each
stage we need to burn the image on to flash with respective
offsets.
This patch creates a single boot image component using
- binman, for arm32 rockchip platforms
- pad_cat, for
The dts node of the DSPI controller in kernel is spi instead of dspi,
it is not correct if use "/soc/dspi@" to fix up the status of the dts
in kernel, so, modify it to "/soc/spi@".
The DSPI2 and I2C5 are muxed, and the status of DSPI2 node in kernel dts
default value is okay, set the status of
On Wed, Dec 18, 2019 at 11:37:21AM -0700, Stephen Warren wrote:
> From: Stephen Warren
>
> get_env() was originally written to strip() the output of printenv to
> isolate the test from any whitespace changes in printenv's output.
> However, this throws away any whitespace in the variable value,
The dts node of the DSPI controller in kernel is spi instead of dspi,
it is not correct if ues "/soc/dspi@" to fix up the status of the dts
in kernel, so, modify it to "/soc/spi@".
The DSPI2 and I2C5 are muxed, and the status of DSPI2 node in kernel dts
default value is okay, set the status of
> Adjust the environment for booting a mainline kernel by default.
> Signed-off-by: Fabio Estevam
> Reviewed-by: Peng Fan
Applied to u-boot-imx, -next, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH,
> When pmic_get() is used with DM the first parameter must be
> the complete node name plus the unit address, so fix it
> accordingly.
> Reported-by: Igor Opaniuk
> Signed-off-by: Fabio Estevam
> Reviewed-by: Peng Fan
Applied to u-boot-imx, -next, thanks !
Best regards,
Stefano Babic
--
> From: Igor Opaniuk
> Add info about supported i.MX7, improve details the usage of
> bcbonly subcommand.
> Signed-off-by: Igor Opaniuk
> Reviewed-by: Oleksandr Suvorov
Applied to u-boot-imx, -next, thanks !
Best regards,
Stefano Babic
--
> When pmic_get() is used with DM the first parameter must be
> the complete node name plus the unit address, so fix it
> accordingly.
> Reported-by: Igor Opaniuk
> Signed-off-by: Fabio Estevam
> Reviewed-by: Peng Fan
Applied to u-boot-imx, -next, thanks !
Best regards,
Stefano Babic
--
> The comment says to clear the bypass bit, but in fact it sets it, thus
> selecting ref_xtal. And the next line of code does not set the divider
> to 12, but to (the reset value of) 1.
> Signed-off-by: Rasmus Villemoes
Applied to u-boot-imx, -next, thanks !
Best regards,
Stefano Babic
--
Hi Bin,
On Thu, 2 Jan 2020 at 19:41, Bin Meng wrote:
>
> Hi Simon,
>
> On Fri, Jan 3, 2020 at 10:30 AM Simon Glass wrote:
> >
> > Hi Anatolij,
> >
> > On Thu, 2 Jan 2020 at 07:34, Anatolij Gustschin wrote:
> > >
> > > Hi Simon,
> > >
> > > On Fri, 20 Dec 2019 18:10:33 -0700
> > > Simon Glass
> In the case of i.MX6 and i.MX7 family SoCs it is safe (from an errata
> point of view) to use thumb2 by default to save space.
> Cc: Stefano Babic
> Cc: Fabio Estevam
> Signed-off-by: Tom Rini
> Reviewed-by: Fabio Estevam
Applied to u-boot-imx, -next, thanks !
Best regards,
Stefano Babic
> From: Frieder Schrempf
> The DDR firmware binaries are not part of the U-Boot source code, so
> we should look for them in the build directory, where they need to be
> copied to before building U-Boot.
> The ATF binary is already fetched from the build directory, but the
> README files for the
On Wed, Dec 25, 2019 at 12:52 PM Sean Anderson wrote:
>
> This adds a message to lists_bind_fdt when it skips initializing a device
> pre-relocation. I've had a couple errors where a device didn't initialize
> properly because one of its dependencies was missing.
>
> Signed-off-by: Sean Anderson
Of all warning status codes up to now only EFI_WARN_DELETE_FAILURE is
defined.
The patch adds the missing definitions for later usage.
Signed-off-by: Heinrich Schuchardt
---
.mailmap | 1 +
include/efi.h | 8 +++-
2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/.mailmap
+ Lukasz
On Wed, Jan 1, 2020 at 4:12 AM Sean Anderson wrote:
>
> CCF clocks should always use the struct clock passed to their methods for
> extracting the driver-specific clock information struct. Previously, many
> functions would use the clk->dev->priv if the device was bound. This could
>
1 - 100 of 122 matches
Mail list logo
