On Thu, Jul 27, 2023 at 06:34:54AM +0200, Jan Kiszka wrote:
> From: Jan Kiszka
>
> This avoids having to maintain to defconfigs that are 99% equivalent.
> The approach is to use binman to generate two flash images,
> flash-pg1.bin and flash-pg2.bin. With the help of a template dtsi, we
> can
On Thu, Jul 27, 2023 at 04:03:30AM -0500, Nishanth Menon wrote:
> From: Sjoerd Simons
>
> Timer0 is used by u-boot as the tick timer; Add it to the soc devices
> list so it can be enabled via the k3 power controller.
>
> Signed-off-by: Sjoerd Simons
> Reviewed-by: Tom Rini
> Reviewed-by:
On Thu, Jul 27, 2023 at 06:34:53AM +0200, Jan Kiszka wrote:
> From: Jan Kiszka
>
> The underlying issue was fixed in the meantime. Also signing the U-Boot
> proper fit image now works. Just supporting custom cert templates
> remains a todo.
>
> Signed-off-by: Jan Kiszka
Applied to
On Thu, Jul 27, 2023 at 06:34:56AM +0200, Jan Kiszka wrote:
> From: Jan Kiszka
>
> Only accept SPACE to stop autobooting. This is safer to avoid accidental
> interruptions on unattended devices.
>
> Signed-off-by: Jan Kiszka
Applied to u-boot/master, thanks!
--
Tom
signature.asc
On Thu, Jul 27, 2023 at 04:03:31AM -0500, Nishanth Menon wrote:
> Update the am62 and am625 device-trees from linux v6.5-rc1. This needed
> the following tweaks to the u-boot specific dtsi as well:
> - Switch tick-timer to the main_timer as it's now defined in the main dtsi
> - Secure proxies are
On Thu, Jul 27, 2023 at 06:34:55AM +0200, Jan Kiszka wrote:
> From: Jan Kiszka
>
> ATF is now called BL31, and OP-TEE since 3.21 suggests to use
> tee-raw.bin instead of (the still identical) tee-pager_v2.bin.
>
> Signed-off-by: Jan Kiszka
Applied to u-boot/master, thanks!
--
Tom
Hi Bin,
On Fri, 28 Jul 2023 at 10:44, Bin Meng wrote:
>
> Hi Simon,
>
> On Sat, Jul 29, 2023 at 12:03 AM Simon Glass wrote:
> >
> > Hi Bin,
> >
> > On Fri, 28 Jul 2023 at 03:38, Bin Meng wrote:
> > >
> > > Hi Simon,
> > >
> > > On Thu, Jul 27, 2023 at 8:55 AM Simon Glass wrote:
> > > >
> > >
From: Marcel Ziswiler
Add initial Verdin AM62 Quad 1GB WB IT prototype and launch
configuration SKUs to ConfigBlock handling.
0069: Verdin AM62 Quad 1GB WB IT
0071: Verdin AM62 Solo 512MB
0072: Verdin AM62 Solo 512MB WB IT
0073: Verdin AM62 Dual 1GB ET
0074: Verdin AM62 Dual 1GB IT
0075: Verdin
From: Marcel Ziswiler
Fix second mux option of clkout0 which should really be
DEV_BOARD0_CLKOUT0_IN_PARENT_HSDIV4_16FFT_MAIN_2_HSDIVOUT1_CLK10
rather than twice the same according to [1].
[1]
https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/am62x/clocks.html#clocks-for-board0-device
> Ok, but if we do that we need to be careful with the standard. Things
> like BLOBLISTT_U_BOOT_VIDEO dont feel U-Boot specific.
The idea behind the Transfer List tag allocation policy is low
friction allocation and organically emerging standards. You're not
supposed to need to have big up-front
On Mon, Jul 24, 2023 at 10:52 PM Simon Glass wrote:
>
> This is copying beyond the end of the destination buffer. Correct the code
> by using a constant for the buffer size.
>
> This long-standing bug prevents virtio bootdevs working correctly on
> qemu-x86 at present.
Nice catch!
>
>
On Thu, Jul 27, 2023 at 06:34:52AM +0200, Jan Kiszka wrote:
> From: Jan Kiszka
>
> The common env bits now come via ti_armv7_common.env, include it.
> Futhermore restore the board-specific boot targets and their ordering
> that is now enforced k3-wide differently. Finally, enable
>
On Tue, Jul 25, 2023 at 01:15:20PM -0500, Andrew Davis wrote:
> This is more complex than it needs to be and makes converting these
> boards over to plain text env files more difficult. Remove setting
> mtdparts as the DTS already contain the partitions. While here also
> drop the conflicting
On Tue, Jul 25, 2023 at 01:15:21PM -0500, Andrew Davis wrote:
> Move to using .env file for setting up environment variables for K2x_evm.
>
> Signed-off-by: Andrew Davis
> Reviewed-by: Tom Rini
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Thu, Jul 27, 2023 at 04:03:29AM -0500, Nishanth Menon wrote:
> From: Sjoerd Simons
>
> The TI AM654 timer is compatible with the omap-timer implementation,
> so add it to the compatible id list.
>
> Signed-off-by: Sjoerd Simons
> Reviewed-by: Roger Quadros
> Reviewed-by: Tom Rini
>
On Tue, Jul 25, 2023 at 01:09:22PM +0530, Manorit Chawdhry wrote:
> The following checks are more reasonable as the previous logs were a bit
> misleading as we could still get the logs that the authetication is
> being skipped but still authenticate. Move the debug prints and checks
> to proper
On Wed, Jul 26, 2023 at 04:36:50PM +0200, Emanuele Ghidoli wrote:
> From: Emanuele Ghidoli
>
> Fix missing declaration of fdt_del_node_path() while compiling am625_fdt.c and
> missing common_fdt.h include in common_fdt.c
>
> Fixes: 70aa5a94d451 ("arm: mach-k3: am62: Fixup CPU core, gpu and pru
On Sat, Jul 22, 2023 at 10:31:48PM +0300, Roger Quadros wrote:
> The approved DT property for MAC efuse (ROM) address is
> "ti,syscon-efuse".
>
> Use that and drop custom property "mac_efuse".
>
> Signed-off-by: Roger Quadros
> Acked-by: Nishanth Menon
Applied to u-boot/master, thanks!
--
in the Git repository at:
>
> https://source.denx.de/u-boot/custodians/u-boot-rockchip.git
> tags/u-boot-rockchip-20230728
>
> for you to fetch changes up to 94da929b933668c4b9ece7d56a2a2bb5543198c9:
>
> board: rockchip: Add Hardkernel ODROID-M1 (2023-07-28 18:45:03 +0800)
>
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Sat, Jul 22, 2023 at 10:31:49PM +0300, Roger Quadros wrote:
> Approved DT binding has the port mode register in the
> "phys" property. Get it from there instead of the custom
> "cpsw-phy-sel" property.
>
> This will allow us to keep DT in sync with Linux.
>
> Signed-off-by: Roger Quadros
>
Hi,
On Fri, 28 Jul 2023 at 06:19, Yuepeng Xing
wrote:
>
> Remove unused parameters from function arch_env_get_location
What is the motivation for this patch?
I don't know for sure, but perhaps the operation is important in
deciding which location to use?
>
> Signed-off-by: Yuepeng Xing
> ---
On Fri, 28 Jul 2023 at 00:20, Heinrich Schuchardt
wrote:
>
> Update the following requirements to their latest version:
>
> * Pygments - syntax highlighting
> * pytz - world timezone definitions
> * certifi - Mozilla's CA bundle
>
> Signed-off-by: Heinrich Schuchardt
> ---
> v2:
>
Hi,
On Fri, 28 Jul 2023 at 06:19, Shenlin Liang
wrote:
>
> Removes unused function arguments from the riscv_cpu_setup function
>
> Signed-off-by: Shenlin Liang
> ---
> arch/riscv/cpu/cpu.c | 2 +-
> arch/riscv/include/asm/system.h | 2 +-
> arch/riscv/lib/spl.c | 2 +-
On Fri, Jul 28, 2023 at 06:07:59PM +0200, Heinrich Schuchardt wrote:
> Dear Tom,
>
> The following changes since commit c98c401dfb485b39c7453a4147b17cd4b8d10c67:
>
> Merge https://source.denx.de/u-boot/custodians/u-boot-usb (2023-07-27
> 10:35:36 -0400)
>
> are available in the Git
On Tue, Jul 25, 2023 at 01:09:21PM +0530, Manorit Chawdhry wrote:
> From: Vignesh Raghavendra
>
> Similar to get_fdt_mmc make get_overlays_mmc look at /boot/dtb/* path
> for overlay files.
>
> Signed-off-by: Vignesh Raghavendra
> Signed-off-by: Manorit Chawdhry
> Reviewed-by: Nikhil M Jain
On Tue, Jul 25, 2023 at 01:09:20PM +0530, Manorit Chawdhry wrote:
> From: Vignesh Raghavendra
>
> All K3 SoCs use same set of args to load kernel for MMC. So move this to
> common place to avoid duplication.
>
> Signed-off-by: Vignesh Raghavendra
> Signed-off-by: Manorit Chawdhry
>
On Mon, Jul 24, 2023 at 03:57:30PM +0200, Maxime Ripard wrote:
> The binding represents the MDIO controller as a child device tree
> node of the MAC device tree node.
>
> The U-Boot driver mostly ignores that child device tree node and just
> hardcodes the resources it uses to support both the
On Tue, Jul 25, 2023 at 01:09:18PM +0530, Manorit Chawdhry wrote:
> This was regressed by the following commit and is required to build with
> additional configs enabled.
>
> Fixes: 14439cd71c1a ("configs: k3: make consistent bootcmd across all k3
> socs")
>
> Signed-off-by: Manorit Chawdhry
The current gpio-uclass design uses name field in struct gpio_dev_priv as
an indicator that GPIO is claimed by consumer. This overloads the function
of name field and does not work well for named pins not configured as GPIO
pins.
Introduce separate bitfield array as the claim indicator.
This
Hi,
+Tom Rini for comment
On Fri, 28 Jul 2023 at 02:35, Nikhil M Jain wrote:
>
> Hi Simon,
>
> On 27/07/23 23:31, Simon Glass wrote:
> > Hi Nikhil,
> >
> > On Wed, 26 Jul 2023 at 23:22, Nikhil M Jain wrote:
> >>
> >> Hi Simon,
> >>
> >> On 27/07/23 06:23, Simon Glass wrote:
> >>> Hi Devarsh,
>
Move the Falcon mode documentation to HTML.
Signed-off-by: Heinrich Schuchardt
---
doc/README.falcon | 232
doc/develop/falcon.rst | 258 +
doc/develop/index.rst | 1 +
3 files changed, 259 insertions(+), 232
On 7/28/23 22:05, Nishanth Menon wrote:
Add Licensing to svg images to clarify the terms.
Signed-off-by: Nishanth Menon
Reviewed-by: Heinrich Schuchardt
On Fri, 28 Jul 2023 at 14:49, Heinrich Schuchardt
wrote:
>
> Move the Falcon mode documentation to HTML.
>
> Signed-off-by: Heinrich Schuchardt
> ---
> doc/README.falcon | 232
> doc/develop/falcon.rst | 258 +
>
On 7/28/23 19:32, Simon Glass wrote:
Hi Heinrich,
On Fri, 28 Jul 2023 at 09:58, Heinrich Schuchardt
wrote:
Add more detail to the description of U-Boot boot phases:
* describe which steps are optional
* mentions alternative boot flows
Signed-off-by: Heinrich Schuchardt
Reviewed-by: Bin
Add Licensing to svg images to clarify the terms.
Signed-off-by: Nishanth Menon
---
doc/board/ti/img/boot_diagram_am65.svg | 4
doc/board/ti/img/boot_diagram_j721e.svg| 4
doc/board/ti/img/boot_diagram_k3_current.svg | 4
doc/board/ti/img/boot_flow_01.svg
Hi Dan,
On Tue, 25 Jul 2023 at 00:51, Dan Carpenter wrote:
>
> Hello Simon Glass,
>
> The patch 10f746591fba: "cros_ec: Add vstore support" from Jan 16,
> 2021 (linux-next), leads to the following Smatch static checker
> warning:
>
> drivers/misc/cros_ec_sandbox.c:543 process_cmd() error: buffer
Hi Tom,
On Fri, 28 Jul 2023 at 12:09, Tom Rini wrote:
>
> On Thu, Jul 27, 2023 at 03:34:48PM +0300, Ilias Apalodimas wrote:
>
> > Tom, Simon
> > are you ok with submodules on this one?
>
> Still punting on that question and waiting for commentary from
> distribution people.
I really quite badly
Hi Simon,
On Sat, Jul 29, 2023 at 12:03 AM Simon Glass wrote:
>
> Hi Bin,
>
> On Fri, 28 Jul 2023 at 03:38, Bin Meng wrote:
> >
> > Hi Simon,
> >
> > On Thu, Jul 27, 2023 at 8:55 AM Simon Glass wrote:
> > >
> > > Hi Bin,
> > >
> > > On Tue, 25 Jul 2023 at 07:43, Bin Meng wrote:
> > > >
> > >
On Thu, Jul 27, 2023 at 03:34:48PM +0300, Ilias Apalodimas wrote:
> Tom, Simon
> are you ok with submodules on this one?
Still punting on that question and waiting for commentary from
distribution people.
--
Tom
signature.asc
Description: PGP signature
Hi Maxime
On Fri, 2023-07-28 at 15:52 +0200, mrip...@kernel.org wrote:
> On Fri, Jul 28, 2023 at 01:34:38PM +, Marcel Ziswiler wrote:
[snip]
> > However, so far I could not make this work for our use-case [1]. It just
> > keeps crashing. Any ideas?
> >
> > [snip]
[snip]
> > [1]
From: Marcel Ziswiler
This series adds initial support for the Toradex Verdin AM62 SoM [1].
The first commit adds resp. PID4s to the ConfigBlock, the second one
fixes an early clocking issue confirmed to be a weird bug in TI's
scripting. And last but not least support for the Toradex Verdin
Hi Bin,
On Fri, 28 Jul 2023 at 03:38, Bin Meng wrote:
>
> Hi Simon,
>
> On Thu, Jul 27, 2023 at 8:55 AM Simon Glass wrote:
> >
> > Hi Bin,
> >
> > On Tue, 25 Jul 2023 at 07:43, Bin Meng wrote:
> > >
> > > Hi Simon,
> > >
> > > On Mon, Jul 24, 2023 at 6:14 AM Simon Glass wrote:
> > > >
> > > >
Dear Tom,
The following changes since commit c98c401dfb485b39c7453a4147b17cd4b8d10c67:
Merge https://source.denx.de/u-boot/custodians/u-boot-usb (2023-07-27
10:35:36 -0400)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-efi.git
Hi Marek,
On Fri, 28 Jul 2023 at 11:17, Marek Vasut wrote:
>
> The current gpio-uclass design uses name field in struct gpio_dev_priv as
> an indicator that GPIO is claimed by consumer. This overloads the function
> of name field and does not work well for named pins not configured as GPIO
>
Hi Heinrich,
On Fri, 28 Jul 2023 at 09:58, Heinrich Schuchardt
wrote:
>
> Add more detail to the description of U-Boot boot phases:
>
> * describe which steps are optional
> * mentions alternative boot flows
>
> Signed-off-by: Heinrich Schuchardt
> Reviewed-by: Bin Meng
> ---
> v2:
>
Hi Bin,
On Fri, 28 Jul 2023 at 09:46, Bin Meng wrote:
>
> Hi Simon,
>
> On Mon, Jul 24, 2023 at 10:52 PM Simon Glass wrote:
> >
> > Drop the duplication and add a single rule which can handle SPL as well.
> >
> > Signed-off-by: Simon Glass
> > ---
> >
> > drivers/Makefile | 4 ++--
> > 1 file
Hi Bin,
On Fri, 28 Jul 2023 at 09:46, Bin Meng wrote:
>
> Hi Simon,
>
> On Mon, Jul 24, 2023 at 10:52 PM Simon Glass wrote:
> >
> > Unfortunately the bochs driver does not currently work with distros. It
> > causes a hang sometime between grub menu selection and the OS displaying
> > something.
On 7/28/23 14:40, Jonas Karlman wrote:
When dr_mode is peripheral or otg and U-Boot has not been built with
DM_USB_GADGET support, booting such device may end up with:
dwc3_glue_bind_common: subnode name: usb@fcc0
Error binding driver 'dwc3-generic-wrapper': -6
Some drivers failed
On 7/28/23 14:40, Jonas Karlman wrote:
RK3568 share glue and ctrl in a single node. Use glue_get_ctrl_dev to
return the glue node as the ctrl node.
Signed-off-by: Jonas Karlman
Reviewed-by: Jagan Teki
---
v4:
- No change
v3:
- No change
v2:
- No change
- Collect r-b tag
On 7/27/23 11:40, Neha Malcom Francis wrote:
These look nice!
On 27/07/23 13:30, Nishanth Menon wrote:
Update the bootflow svg diagram and reuse across the platforms as they
are common.
We should add SPDX license information to all the SVG files that you
created.
e.g.
like the license
On jeu., juil. 27, 2023 at 20:37, Simon Glass wrote:
> Use the correct function here, since there may be multiple IDE devices
> available.
>
> Signed-off-by: Simon Glass
Reviewed-by: Mattijs Korpershoek
> ---
>
> drivers/block/ide.c | 4 ++--
> 1 file changed, 2 insertions(+), 2
Update the following requirements to their latest version:
* Pygments - syntax highlighting
* pytz - world timezone definitions
* certifi - Mozilla's CA bundle
Signed-off-by: Heinrich Schuchardt
---
v2:
fix typo in title
---
doc/sphinx/requirements.txt | 6 +++---
1 file changed,
On 7/24/23 12:17, Ilias Apalodimas wrote:
The EFI doesn't allow removal of handles, unless all hosted protocols
are cleanly removed. Our efi_delete_handle() is a bit intrusive.
Although it does try to delete protocols before removing a handle,
it doesn't care if that fails. Instead it only
On Mon, Jul 24, 2023 at 10:52 PM Simon Glass wrote:
>
> This was left over from some previous debugging. Drop it.
>
> Signed-off-by: Simon Glass
> ---
>
> arch/x86/lib/spl.c | 1 -
> 1 file changed, 1 deletion(-)
>
Reviewed-by: Bin Meng
Hi Simon,
On Mon, Jul 24, 2023 at 10:52 PM Simon Glass wrote:
>
> Drop the duplication and add a single rule which can handle SPL as well.
>
> Signed-off-by: Simon Glass
> ---
>
> drivers/Makefile | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/Makefile
On Mon, Jul 24, 2023 at 10:52 PM Simon Glass wrote:
>
> Call the hardware-init function from QEMU from SPL. This allows the video
> BIOS to operate correctly.
>
> Create an x86-wide qemu.h header to avoid having to #ifdef the header in
> spl.c
>
> Signed-off-by: Simon Glass
> ---
>
>
Hi Simon,
On Mon, Jul 24, 2023 at 10:52 PM Simon Glass wrote:
>
> Unfortunately the bochs driver does not currently work with distros. It
> causes a hang sometime between grub menu selection and the OS displaying
> something.
Does this reproduce reliably?
>
> This reverts commit
Add more detail to the description of U-Boot boot phases:
* describe which steps are optional
* mentions alternative boot flows
Signed-off-by: Heinrich Schuchardt
---
doc/develop/spl.rst | 13 ++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/doc/develop/spl.rst
On Fri, Jul 28, 2023 at 9:54 PM Heinrich Schuchardt
wrote:
>
> The EFI_RNG_PROTOCOL is needed for Linux' KASLR.
>
> QEMU can provide a virtio-rng device to emulate a hardware random number
> generator which is supported by our virtio_rng driver.
>
> Enabling CONFIG_DM_RNG will enable
On Fri, Jul 28, 2023 at 11:49 PM Heinrich Schuchardt
wrote:
>
> Add more detail to the description of U-Boot boot phases:
>
> * describe which steps are optional
> * mentions alternative boot flows
>
> Signed-off-by: Heinrich Schuchardt
> ---
> doc/develop/spl.rst | 13 ++---
> 1 file
Hey Heinrich,
On Fri, Jul 28, 2023 at 05:48:31PM +0200, Heinrich Schuchardt wrote:
> Add more detail to the description of U-Boot boot phases:
>
> * describe which steps are optional
> * mentions alternative boot flows
>
> Signed-off-by: Heinrich Schuchardt
> ---
> doc/develop/spl.rst | 13
Hi Kever,
> Da: U-Boot Per conto di Jagan Teki
> Inviato: venerdì 28 luglio 2023 14:07
> A: Kever Yang
> Cc: tr...@konsulko.com; u-boot@lists.denx.de
> Oggetto: Re: Pull request: u-boot-rockchip-20230728
>
> Hi Kever,
>
> On Fri, Jul 28, 2023 at 5:04 PM Kever Ya
Add more detail to the description of U-Boot boot phases:
* describe which steps are optional
* mentions alternative boot flows
Signed-off-by: Heinrich Schuchardt
Reviewed-by: Bin Meng
---
v2:
add missing comma
---
doc/develop/spl.rst | 13 ++---
1 file changed, 10
On 7/21/23 21:19, Jason Kacines wrote:
Add documentation on how to use OpenOCD to debug U-Boot for TI K3
Generation boards.
Signed-off-by: Jason Kacines
Thank you for providing OpenOCD usage guidance.
This patch cannot be applied to origin/master. Please, rebase it.
Please, remove trailing
On Thu, 2023-07-27 at 19:33 +0300, Matwey V. Kornilov wrote:
> Enable missed CONFIG_ROCKCHIP_EFUSE to use fixed Ethernet MAC address.
>
> Signed-off-by: Matwey V. Kornilov
Reviewed-by: Christopher Obbard
> ---
> configs/rock64-rk3328_defconfig | 2 ++
> 1 file changed, 2 insertions(+)
>
>
On jeu., juil. 27, 2023 at 20:37, Simon Glass wrote:
> This name is a little confusing since it suggests that it sets up the
> sibling block device. In fact it sets up a bootdev for it. Rename the
> function to make this clearer.
>
> Signed-off-by: Simon Glass
> ---
>
> boot/bootdev-uclass.c
On Thu, Jul 27, 2023 at 5:34 PM Matwey V. Kornilov
wrote:
>
> Enable missed CONFIG_ROCKCHIP_EFUSE to use fixed Ethernet MAC address.
I've already sent a patch to do that as part of a series for other improvements:
This series sync rk356x.dtsi and rk3566-radxa-cm3-io.dts from linux
v6.4, add bootph-all to common pinctrl nodes and relax FIT load order
in rk356x-u-boot.dtsi.
Patch 1-2 sync rk356x device tree from linux v6.4.
Patch 3 move common pinctrl nodes to rk356x-u-boot.dtsi.
Patch 4 change to try and
Sync rk356x.dtsi from linux v6.4.
Signed-off-by: Jonas Karlman
Reviewed-by: Kever Yang
---
v2:
- No change
arch/arm/dts/rk3568-pinctrl.dtsi | 94
arch/arm/dts/rk356x.dtsi | 14 +++--
2 files changed, 102 insertions(+), 6 deletions(-)
diff --git
Sync rk3566-radxa-cm3-io.dts from linux v6.4.
Signed-off-by: Jonas Karlman
Reviewed-by: Kever Yang
---
v2:
- No change
arch/arm/dts/rk3566-radxa-cm3-io.dts | 8
1 file changed, 8 insertions(+)
diff --git a/arch/arm/dts/rk3566-radxa-cm3-io.dts
b/arch/arm/dts/rk3566-radxa-cm3-io.dts
able in the Git repository at:
>
> https://source.denx.de/u-boot/custodians/u-boot-rockchip.git
> tags/u-boot-rockchip-20230728
>
> for you to fetch changes up to 94da929b933668c4b9ece7d56a2a2bb5543198c9:
>
> board: rockchip: Add Hardkernel ODROID-M1 (2023-07-28 18:45:03 +08
Removes unused function arguments from the riscv_cpu_setup function
Signed-off-by: Shenlin Liang
---
arch/riscv/cpu/cpu.c | 2 +-
arch/riscv/include/asm/system.h | 2 +-
arch/riscv/lib/spl.c | 2 +-
board/starfive/visionfive2/spl.c | 2 +-
4 files changed, 4
Remove unused parameters from function arch_env_get_location
Signed-off-by: Yuepeng Xing
---
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 2 +-
arch/arm/mach-imx/imx8m/soc.c | 2 +-
board/theobroma-systems/puma_rk3399/puma-rk3399.c | 2 +-
env/env.c
On Thu, 27 Jul 2023 04:03:28 -0500, Nishanth Menon wrote:
> Hopefully, third time is a charm.. ;)
>
> I have picked up part of Sjoerd's series[1] to keep it constrained just
> to dts sync at this point rather than adding newer functionality on top.
>
>
> [ ... ]
Tested-by: Maxime Ripard
On Thu, 27 Jul 2023 04:03:31 -0500, Nishanth Menon wrote:
> Update the am62 and am625 device-trees from linux v6.5-rc1. This needed
> the following tweaks to the u-boot specific dtsi as well:
> - Switch tick-timer to the main_timer as it's now defined in the main dtsi
> - Secure proxies are
On 2023-07-28 13:02, Kever Yang wrote:
>
> On 2023/7/23 22:55, Jonas Karlman wrote:
>> This series was created in collaboration with Nicolas Frattaroli and add
>> support for Pine64 Quartz64 and SOQuartz boards with a RK3566 SoC.
>>
>> - Pine64 Quartz64-A Board
>> - Pine64 Quartz64-B Board
>> -
:
Merge https://source.denx.de/u-boot/custodians/u-boot-usb (2023-07-27
10:35:36 -0400)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-rockchip.git
tags/u-boot-rockchip-20230728
for you to fetch changes up to 94da929b933668c4b9ece7d56a2a2bb5543198c9
Hi Julia,
Apologies for the late response, I was on vacation.
On Mon, 3 Jul 2023 at 16:03, Julia Daxenberger
wrote:
>
> Add TPM2_GetTestResult command support and change the command file and the
> help accordingly. Add Python tests and sandbox driver functionality.
>
> The TPM2_GetTestResult
TPL max size is limited to 184 KB, SPL is loaded to 0x0 and TF-A is
loaded to 0x4, this limit SPL max size to 256 KB. With BootRom only
reading first 2 KB per 4 KB page of SPI flash, 880 KB may be needed for
TPL+SPL in a worst-case scenario. (184 KB + 256 KB) x 2 = 880 KB
Use 0xE (896 KB)
This series fixes a build issue introduced in commit 5713135ecc75
("rockchip: rockpro64: Build u-boot-rockchip-spi.bin"), reported by
Peter Robinson.
Closer inspection into how SPI flash is used revealed that current
payload offset, 0x6, is not enough to accommodate a worst-case
scenario and
TPL max size is limited to 184 KB, SPL is loaded to 0x0 and TF-A is
loaded to 0x4, this limit SPL max size to 256 KB. With BootRom only
reading first 2 KB per 4 KB page of SPI flash, 880 KB may be needed for
TPL+SPL in a worst-case scenario. (184 KB + 256 KB) x 2 = 880 KB
Use 0xE (896 KB)
TPL max size is limited to 184 KB, SPL is loaded to 0x0 and TF-A is
loaded to 0x4, this limit SPL max size to 256 KB. With BootRom only
reading first 2 KB per 4 KB page of SPI flash, 880 KB may be needed for
TPL+SPL in a worst-case scenario. (184 KB + 256 KB) x 2 = 880 KB
Use 0xE (896 KB)
TPL max size is limited to 184 KB, SPL is loaded to 0x0 and TF-A is
loaded to 0x4, this limit SPL max size to 256 KB. With BootRom only
reading first 2 KB per 4 KB page of SPI flash, 880 KB may be needed for
TPL+SPL in a worst-case scenario. (184 KB + 256 KB) x 2 = 880 KB
Use 0xE (896 KB)
Update documentation on how to write a bootable u-boot-rockchip-spi.bin
image into SPI flash. This removes the reference to a hardcoded and now
obsolete 0x6 payload offset.
Also remove an obsolete reference to pad_cat.
Signed-off-by: Jonas Karlman
Reviewed-by: Quentin Schulz
---
v2:
-
BootRom will try to load TPL+SPL from media in the following order:
- SPI NOR Flash
- SPI NAND Flash
- NAND Flash
- eMMC
- SDMMC
SPL will try to load FIT from media in the order defined in the device
tree u-boot,spl-boot-order property.
Change the default order to load FIT from to:
- same media
Add bootph-all prop to common pinctrl nodes for eMMC, FSPI, SD-card and
UART2 that are typically used by multiple boards. Unreferenced nodes are
removed from the SPL device tree during a normal build.
Signed-off-by: Jonas Karlman
Reviewed-by: Kever Yang
---
v2:
- Rebase on
The commit fd6e425be243 ("rockchip: rk3588-rock-5b: Enable boot from SPI
NOR flash") enabled SPI flash support by adding a spi0 alias.
Correct this by adding spi0-spi5 aliases in rk3588s-u-boot.dtsi and
SF_DEFAULT_BUS=5 and SPL_DM_SEQ_ALIAS=y in defconfig. Also enabled
support for parsing and
The series "rockchip: rk35xx: Update defconfigs and enable boot from SPI
NOR flash" enabled SPI flash boot support on ROCK 3A and ROCK 5B using a
spi0 alias.
This spi0 alias should be used for the spi0 device tree node and not the
sfc node.
Correct this by adding spi4 and spi5 aliases to
The commit 64f79f88a751 ("rockchip: rk3568-rock-3a: Enable boot from SPI
NOR flash") enabled SPI flash support by overriding the spi0 alias.
Correct this by adding a new spi4 alias in rk356x-u-boot.dtsi and
SF_DEFAULT_BUS=4 and SPL_DM_SEQ_ALIAS=y in defconfig. Also enabled
support for parsing and
Function board_switch_core_volt has not been used since it was
defined
Signed-off-by: Shenlin Liang
---
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 5 -
1 file changed, 5 deletions(-)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index
This series add support for rk3568 in dwc3-generic driver and change to
use the dwc3-generic driver for rk3568 devices having usb enabled.
After these changes it should be possible to support usb gadget on
rk3568 with e.g.:
# CONFIG_USB_FUNCTION_FASTBOOT is not set
CONFIG_DM_USB_GADGET=y
Hi Simon
On 28/07/23 08:05, Simon Glass wrote:
Hi Neha,
On Thu, 27 Jul 2023 at 06:12, Neha Malcom Francis wrote:
While we have the option of using '-a to grab a file from a
specific directory, this is problematic when searching for a filename
shared by multiple files across directories. An
The current error check for device_find_first_child is not working as
expected, the documentation for device_find_first_child mention:
@devp: Returns first child device, or NULL if none
Return: 0
Change to return early when there is no child node to avoid any possible
null pointer
Remove regulator-boot-on prop from regulators now that the phy core has
support for phy-supply after the commit c57e0dcd9384 ("phy: add support
for phy-supply").
This reverts commit 7911f409ff20dce5995cc1b703a6e30c94022f6b.
Signed-off-by: Jonas Karlman
Reviewed-by: Kever Yang
---
v4:
- Rebase
Change RK3568 devices to use the newer dwc3-generic driver instead of
the old xhci-dwc3 driver for USB 3.0 support.
Signed-off-by: Jonas Karlman
Reviewed-by: Kever Yang
---
v4:
- Rebase on u-boot-rockchip/master and include change to
nanopi-r5c-rk3568 and nanopi-r5s-rk3568
- Collect r-b tag
On 09:31-20230728, Heinrich Schuchardt wrote:
>
>
> On 7/27/23 11:40, Neha Malcom Francis wrote:
> > These look nice!
> >
> > On 27/07/23 13:30, Nishanth Menon wrote:
> > > Update the bootflow svg diagram and reuse across the platforms as they
> > >
When dr_mode is peripheral or otg and U-Boot has not been built with
DM_USB_GADGET support, booting such device may end up with:
dwc3_glue_bind_common: subnode name: usb@fcc0
Error binding driver 'dwc3-generic-wrapper': -6
Some drivers failed to bind
initcall sequence effbca08
RK3568 share glue and ctrl in a single node. Use glue_get_ctrl_dev to
return the glue node as the ctrl node.
Signed-off-by: Jonas Karlman
Reviewed-by: Jagan Teki
---
v4:
- No change
v3:
- No change
v2:
- No change
- Collect r-b tag
drivers/usb/dwc3/dwc3-generic.c | 17 +
1
On 08:52-20230728, Heinrich Schuchardt wrote:
> On 7/21/23 21:19, Jason Kacines wrote:
> > Add documentation on how to use OpenOCD to debug U-Boot for TI K3
> > Generation boards.
> >
> > Signed-off-by: Jason Kacines
>
> Thank you for providing OpenOCD usage
Hi Simon
On 28/07/23 08:05, Simon Glass wrote:
Hi Neha,
On Thu, 27 Jul 2023 at 06:12, Neha Malcom Francis wrote:
They need to get the contents of the FIT section beforehand, process
them and prepend the signing certificate to the FIT contents
Signed-off-by: Neha Malcom Francis
---
1 - 100 of 137 matches
Mail list logo
