On Monday, December 06, 2010 03:59:44 Luigi Mantellini wrote:
On Mon, Dec 6, 2010 at 8:15 AM, Mike Frysinger wrote:
On Sunday, December 05, 2010 04:18:44 Luigi 'Comio' Mantellini wrote:
On structure Initialization, LZMA code tries to free the dictionary
and probs buffers, also when these
On Mon, Dec 6, 2010 at 9:57 AM, Mike Frysinger vap...@gentoo.org wrote:
sorry, but this is not an acceptable reason. so unless you have an actual
error report here, your patch gets NAK-ed.
-mike
Hi mike,
my pov is different: free should (must) be called only on already
allocated pointers.
-Original Message-
From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de]
On Behalf Of Clint Adams
Sent: Sunday, December 05, 2010 6:58 AM
To: u-boot@lists.denx.de
Subject: [U-Boot] failure to boot GuruPlug with v2010.12-rc2 .kwb
Loading the ELF v2010.12-rc2
-Original Message-
From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de]
On Behalf Of Clint Adams
Sent: Sunday, December 05, 2010 2:21 AM
To: u-boot@lists.denx.de
Subject: [U-Boot] PATCH: enable ext2 on GuruPlug
ext2 is just as useful on the guru as on the
On Mon, Dec 6, 2010 at 9:57 AM, Mike Frysinger vap...@gentoo.org wrote:
sorry, but this is not an acceptable reason. so unless you have an actual
error report here, your patch gets NAK-ed.
-mike
Hi mike,
my pov is different: free should (must) be called only on already
allocated
Dear Wolfgang, Albert,
The following changes since commit 49733aa0b9d29803384ad4bce74985f4bbe7e9aa:
Wolfgang Denk (1):
Merge branch 'master' of /home/wd/git/u-boot/custodians
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git for2010.12
Andreas Bießmann (1):
Hi Wolfgang and ML,
On Sat, Dec 4, 2010 at 11:47 PM, Wolfgang Denk w...@denx.de wrote:
Dear Luigi 'Comio' Mantellini,
Not only the commit message, also the remaining text is full of
typos. Please run through a spell checker.
you are right. I will check better my english. sorry!
Hi Joakim,
We have not ton but just two points to fix. 1) when free dict before
to allocate another one, and 2) when free probs before to allocate
another one. These scenarios are not used into u-boot code, because
the library is one shot and the other free are called (if called)
just to
From: Reinhard Meyer i...@emk-elektronik.de
Adds support for the EMK TOP9000 CPU Module which is
based on ATMELs ARM926EJS AT91SAM9XE SoC.
Signed-off-by: Reinhard Meyer u-b...@emk-elektronik.de
---
MAINTAINERS |3 +-
board/emk/top9000/Makefile | 54
Luigi Mantellini luigi.mantellini...@gmail.com wrote on 2010/12/06 10:47:21:
Hi Joakim,
We have not ton but just two points to fix. 1) when free dict before
to allocate another one, and 2) when free probs before to allocate
another one. These scenarios are not used into u-boot code, because
Hi Reinhard,
Le 06/12/2010 10:43, Reinhard Meyer a écrit :
I think this time, it's still Wolfgang doing the pull to ARM, right?
Correct.
Best Regards,
Reinhard
Amicalement,
--
Albert.
___
U-Boot mailing list
U-Boot@lists.denx.de
Hi Felix,
On Sunday 05 December 2010 15:27:02 Felix Radensky wrote:
On a custom 460EX board I have a 2Gbyte NAND device, 1Gbyte per chip
select. I'm trying to enable support for the second NAND CS, so far
without success.
U-Boot properly detects both devices, (manufacturer, size, bus
Add initial support for mx53 with the following change,
- Add the iomux support and the pin definition,
- Add the regs definition, clean up some unused def from mx51,
- Add the low level init support, make use the freq input of setup_pll macro
This patch has been tested on MX51 Babbage 3.0
-Original Message-
From: Prafulla Wadaskar
Sent: Monday, December 06, 2010 2:49 PM
To: 'Clint Adams'; u-boot@lists.denx.de
Subject: RE: [U-Boot] failure to boot GuruPlug with v2010.12-rc2 .kwb
-Original Message-
From: u-boot-boun...@lists.denx.de
-Original Message-
From: Prafulla Wadaskar
Sent: Monday, December 06, 2010 2:51 PM
To: 'Clint Adams'; u-boot@lists.denx.de
Subject: RE: [U-Boot] PATCH: enable ext2 on GuruPlug
-Original Message-
From: u-boot-boun...@lists.denx.de
Hi Wolfgang
those patches are for add xburst jz4740 and Ben NanoNote to U-Boot
some info about xburst jz4740:
the xburst jz4740 is recently added to linux 2.6.36
and it's support the device Ben NanoNote out of box,
this xburst jz4740 cpu have one feature is Boot From USB, there is a
From: Xiangfu Liu xian...@openmobilefree.net
Signed-off-by: Xiangfu Liu xian...@openmobilefree.net
---
arch/mips/cpu/xburst/Makefile| 50 +++
arch/mips/cpu/xburst/config.mk | 33 ++
arch/mips/cpu/xburst/cpu.c | 160
arch/mips/cpu/xburst/jz4740.c| 267
From: Xiangfu Liu xian...@openmobilefree.net
Signed-off-by: Xiangfu Liu xian...@openmobilefree.net
---
nand_spl/board/xburst/nanonote/Makefile | 96
nand_spl/board/xburst/nanonote/u-boot.lds | 63 ++
nand_spl/nand_boot_jz4740.c | 344
From: Xiangfu Liu xian...@openmobilefree.net
Signed-off-by: Xiangfu Liu xian...@openmobilefree.net
---
arch/mips/include/asm/jz4740.h | 1380
1 files changed, 1380 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/include/asm/jz4740.h
diff
From: Xiangfu Liu xian...@openmobilefree.net
Signed-off-by: Xiangfu Liu xian...@openmobilefree.net
---
board/xburst/nanonote/Makefile| 45
board/xburst/nanonote/config.mk | 31 ++
board/xburst/nanonote/nanonote.c | 110 +++
From: Xiangfu Liu xian...@openmobilefree.net
Signed-off-by: Xiangfu Liu xian...@openmobilefree.net
---
drivers/mtd/nand/jz4740_nand.c | 252
1 files changed, 252 insertions(+), 0 deletions(-)
create mode 100644 drivers/mtd/nand/jz4740_nand.c
diff --git
Dear Luigi Mantellini,
In message aanlkti=kq+zc7yvue5ssc=wzzuwecpmyqhq-c-hz0...@mail.gmail.com you
wrote:
my pov is different: free should (must) be called only on already
allocated pointers. I know that free code checks at begin if ptr is
null or not. Anyway I don't understand why a null
The -fPIC flag belongs with -mrelocatable, move it there.
Also change -fPIC to -fpic as this produces smaller
binaries.
However, currently -mrelocatable promotes -fpic to -fPIC, a
fix for this is in upcoming gcc 4.6 or you can apply this small
patch to gcc:
diff --git a/gcc/config/rs6000/sysv4.h
Change my old email address which is no longer valid.
Signed-off-by: Stelian Pop stel...@popies.net
---
On Sat, Nov 27, 2010 at 11:27:28PM +0100, Albert ARIBAUD wrote:
Apparently MAINTAINERS entry for Stelian Pop is not correct any
more; CC:ing Stelian's address as last seen on the list. If
Hi Wolfgang,
Can these 3 patches be included before the next release?
They fix build errors in the versatile express code.
http://lists.denx.de/pipermail/u-boot/2010-December/082984.html
http://lists.denx.de/pipermail/u-boot/2010-November/081034.html
On 12/06/2010 11:57 AM, Jason Liu wrote:
Hi Jason,
Add initial support for mx53 with the following change,
- Add the iomux support and the pin definition,
- Add the regs definition, clean up some unused def from mx51,
- Add the low level init support, make use the freq input of setup_pll
On Sun, 5 Dec 2010 15:22:25 -0600
Paulraj, Sandeep s-paul...@ti.com wrote:
The nand-read function returns an error code if correctable errors have
occurred.
This is not desirable, since the errors have been corrected!
This patch switches to the nand_read_skip_bad function which
Dear Reinhard,
Just tell me when a patch is final and ready to be applied :)
If Andreas can confirm the patch, I my case its final
regards Jens
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
-msingle-pic-base is a new gcc option for ppc and
it reduces the size of my u-boot with 6-8 KB.
While at it, add -fno-jump-tables too to save a
few more bytes.
-msingle-pic-base will be in gcc 4.6, however
backported patches are available at
http://bugs.gentoo.org/show_bug.cgi?id=347281
XZ (aka LZMA2) is the new version of lzma compression format.
The following patch add a cut-down version of XZ Embedded library (v20100702)
that supports only single-call API.
In order to enable XZ support, the CONFIG_XZ must be defined by board
configuration file.
For any details, please
Hi Luigi,
On Sun, 2010-12-05 at 16:16 +0100, Luigi 'Comio' Mantellini wrote:
XZ (aka LZMA2) is the new version of lzma compression format.
The following patch add a cut-down version of XZ Embedded library (v20100702)
that supports only single-call API.
In order to enable XZ support, the
init_sequence is an array with function pointers which
are really hard to follow when you need to debug this area.
Turn it into plain function calls instead which makes
the code a bit uglier but I find the simpler debugging
much more valuable.
An added bonus is that it is smaller too:
text
Dear Reinhard Meyer,
please find below the git-format-patch generated patch.
Sorry, I can not see whose thread I hijacked. May you please explain?
Best Regards
Guido
Signed-off-by: Guido Classen cla...@gmail.com
---
arch/arm/include/asm/arch-at91/at91_pmc.h |8
1 files changed,
On Monday, December 06, 2010 12:58:37 Peter Tyser wrote:
On Sun, 2010-12-05 at 16:16 +0100, Luigi 'Comio' Mantellini wrote:
XZ (aka LZMA2) is the new version of lzma compression format.
The following patch add a cut-down version of XZ Embedded library
(v20100702) that supports only
Dear Joakim Tjernlund,
In message 1291658370-26367-1-git-send-email-joakim.tjernl...@transmode.se
you wrote:
init_sequence is an array with function pointers which
are really hard to follow when you need to debug this area.
Turn it into plain function calls instead which makes
the code a bit
Wolfgang Denk w...@denx.de wrote on 2010/12/06 21:09:47:
Dear Joakim Tjernlund,
In message 1291658370-26367-1-git-send-email-joakim.tjernl...@transmode.se
you wrote:
init_sequence is an array with function pointers which
are really hard to follow when you need to debug this area.
Turn
Dear all,
Am 06.12.2010 um 18:36 schrieb Jens Scharsig:
Dear Reinhard,
Just tell me when a patch is final and ready to be applied :)
If Andreas can confirm the patch, I my case its final
Ouch ... it is completely wrong :(
See here ...
---8---
@@ -65,7 +65,8 @@ LoopOsc:
ldr
On Mon, 6 Dec 2010 21:42:28 +0100
Joakim Tjernlund joakim.tjernl...@transmode.se wrote:
Wolfgang Denk w...@denx.de wrote on 2010/12/06 21:09:47:
Dear Joakim Tjernlund,
In message
1291658370-26367-1-git-send-email-joakim.tjernl...@transmode.se you wrote:
init_sequence is an array
This adds support for the PCA9539 family of gpio devices which have 16
output pins. The devices are similar to chips that use the pca953x driver
except the register map is expanded (in a non-backwards compatible manner)
to allow for the extra 8 pins.
This driver has one gotcha that you can only
Dear Joakim Tjernlund,
In message
ofee7adeea.47556dd1-onc12577f1.006faf8d-c12577f1.0071c...@transmode.se you
wrote:
This is indeed much uglier. What exactly is your problem with
debugging the existing code?
Whenever I screw up so that one of the init funcs crashes, often without
any
On Tue, Dec 7, 2010 at 8:33 AM, Scott Wood scottw...@freescale.com wrote:
On Mon, 6 Dec 2010 21:42:28 +0100
Joakim Tjernlund joakim.tjernl...@transmode.se wrote:
Wolfgang Denk w...@denx.de wrote on 2010/12/06 21:09:47:
Dear Joakim Tjernlund,
In message
Dear Kumar Gala,
In message pine.lnx.4.64.1012011300240.2...@localhost.localdomain you wrote:
[for v2010.12]
The following changes since commit 49733aa0b9d29803384ad4bce74985f4bbe7e9aa:
Merge branch 'master' of /home/wd/git/u-boot/custodians (2010-11-30
22:13:32 +0100)
are available
Dear Stefan Roese,
In message 201012041102.07290...@denx.de you wrote:
The following changes since commit 49733aa0b9d29803384ad4bce74985f4bbe7e9aa:
Merge branch 'master' of /home/wd/git/u-boot/custodians (2010-11-30
22:13:32
+0100)
are available in the git repository at:
Dear Anatolij Gustschin,
In message 20101204214204.26e1e...@wker you wrote:
Dear Wolfgang,
The following changes since commit 49733aa0b9d29803384ad4bce74985f4bbe7e9aa:
Merge branch 'master' of /home/wd/git/u-boot/custodians (2010-11-30
22:13:32 +0100)
are available in the git
On Tue, 7 Dec 2010 09:36:40 +1100
Graeme Russ graeme.r...@gmail.com wrote:
On Tue, Dec 7, 2010 at 8:33 AM, Scott Wood scottw...@freescale.com wrote:
I think it's easier with the function pointers -- if you want to debug
a hang in that phase of the boot, just have the loop print the address
Hi All,
On Mon, Dec 6, 2010 at 7:06 PM, Mike Frysinger vap...@gentoo.org wrote:
On Monday, December 06, 2010 12:58:37 Peter Tyser wrote:
On Sun, 2010-12-05 at 16:16 +0100, Luigi 'Comio' Mantellini wrote:
XZ (aka LZMA2) is the new version of lzma compression format.
The following patch add a
On Tue, Dec 7, 2010 at 9:49 AM, Scott Wood scottw...@freescale.com wrote:
On Tue, 7 Dec 2010 09:36:40 +1100
Graeme Russ graeme.r...@gmail.com wrote:
On Tue, Dec 7, 2010 at 8:33 AM, Scott Wood scottw...@freescale.com wrote:
I think it's easier with the function pointers -- if you want to
Dear Reinhard Meyer,
In message 4cfcb04b.10...@emk-elektronik.de you wrote:
Dear Wolfgang, Albert,
The following changes since commit 49733aa0b9d29803384ad4bce74985f4bbe7e9aa:
Wolfgang Denk (1):
Merge branch 'master' of /home/wd/git/u-boot/custodians
are available in the git
On Tue, Dec 7, 2010 at 9:36 AM, Wolfgang Denk w...@denx.de wrote:
Dear Joakim Tjernlund,
In message
ofee7adeea.47556dd1-onc12577f1.006faf8d-c12577f1.0071c...@transmode.se you
wrote:
[snip]
The other way is to look up one those funs and set a BP there and hope
for the best. Then repeat
Dear Graeme Russ,
In message aanlktikh3o9gzwsueakn-bk+8iahueryk2il+ezzz...@mail.gmail.com you
wrote:
I agree, but you can't print the address before you have console output. I
notice that console_init_f() can be up to 13th in the list of initialisation
functions - How often is that the case?
On Tue, 7 Dec 2010 10:04:23 +1100
Graeme Russ graeme.r...@gmail.com wrote:
And sdram_adjust_866() - True, not 'a lot'
But then there is dpram_init() as well which does not look like a
pre-req to console
DPRAM is not general purpose memory -- it actually is used by the
serial hardware. And
Dear Luigi Mantellini,
In message aanlkti=0oeqvuyldeq_xt2pwf=rfoqj7m3v38uyw7...@mail.gmail.com you
wrote:
The LZMA and XZ overlap on the internal LZMA code (each one has the
own implementation). We can decide 1) to ignore this patch (and future
rework) to not support XZ 2) have both XZ and
Dear Graeme Russ,
In message aanlktimuptir6usc7k9srngtsxyep+0dxgz9fwhvs...@mail.gmail.com you
wrote:
And sdram_adjust_866() - True, not 'a lot'
But then there is dpram_init() as well which does not look like a
pre-req to console
It is. On some 8xx system you have to load microcode and
Dear Wolfgang Denk,
In message4cfcb04b.10...@emk-elektronik.de you wrote:
Dear Wolfgang, Albert,
The following changes since commit 49733aa0b9d29803384ad4bce74985f4bbe7e9aa:
Wolfgang Denk (1):
Merge branch 'master' of /home/wd/git/u-boot/custodians
are available in the git
Scott Wood scottw...@freescale.com wrote on 2010/12/06 23:49:04:
On Tue, 7 Dec 2010 09:36:40 +1100
Graeme Russ graeme.r...@gmail.com wrote:
On Tue, Dec 7, 2010 at 8:33 AM, Scott Wood scottw...@freescale.com wrote:
I think it's easier with the function pointers -- if you want to debug
a
Hi Chris,
On Tue, 2010-12-07 at 10:48 +1300, Chris Packham wrote:
This adds support for the PCA9539 family of gpio devices which have 16
output pins. The devices are similar to chips that use the pca953x driver
except the register map is expanded (in a non-backwards compatible manner)
to
On Tue, 7 Dec 2010 01:07:30 +0100
Joakim Tjernlund joakim.tjernl...@transmode.se wrote:
Scott Wood scottw...@freescale.com wrote on 2010/12/06 23:49:04:
On Tue, 7 Dec 2010 09:36:40 +1100
Graeme Russ graeme.r...@gmail.com wrote:
On Tue, Dec 7, 2010 at 8:33 AM, Scott Wood
On Thu, Dec 02, 2010 at 04:53:30AM -, Lei Wen wrote:
Seems original implementation forget to set the pointer to point
to the oobbuf, so when we want to see oob buf, we see nothing...
Fix it by get pointer as the oobbuf set.
Signed-off-by: Lei Wen lei...@marvell.com
---
Wolfgang Denk w...@denx.de wrote on 2010/12/06 23:36:21:
Dear Joakim Tjernlund,
In message
ofee7adeea.47556dd1-onc12577f1.006faf8d-c12577f1.0071c...@transmode.se you
wrote:
This is indeed much uglier. What exactly is your problem with
debugging the existing code?
Whenever I
On Mon, 6 Dec 2010 11:13:22 -0600
Scott Wood scottw...@freescale.com wrote:
On Sun, 5 Dec 2010 15:22:25 -0600
Paulraj, Sandeep s-paul...@ti.com wrote:
The nand-read function returns an error code if correctable errors have
occurred.
This is not desirable, since the errors have
On Mon, Nov 29, 2010 at 05:49:19AM -,
=?utf-8?q?David_M=C3=BCller_=28ELSOFT_AG=29_=3Cd=2Emueller=40elsoft?==?utf-8?q?=2Ech=3E?=
wrote:
Hello
The attached patch fixes wrong timing default values and adds the
possibility to specify board specific timing value in the board config file.
Scott Wood scottw...@freescale.com wrote on 2010/12/07 01:21:44:
On Tue, 7 Dec 2010 01:07:30 +0100
Joakim Tjernlund joakim.tjernl...@transmode.se wrote:
Scott Wood scottw...@freescale.com wrote on 2010/12/06 23:49:04:
On Tue, 7 Dec 2010 09:36:40 +1100
Graeme Russ
commit 341764495180a712b9aaccfa0479b2ff7e44e35b
Author: Deepak Saxena deepak_sax...@mentor.com
Date: Mon Dec 6 15:52:07 2010 -0800
Honor /memory/reg node in DTB files
This patch adds code to the bootm path to check if a valid
/memory/reg node exists in the DTB file and if so, it
On Tue, 7 Dec 2010 01:41:22 +0100
Joakim Tjernlund joakim.tjernl...@transmode.se wrote:
Scott Wood scottw...@freescale.com wrote on 2010/12/07 01:21:44:
On Tue, 7 Dec 2010 01:07:30 +0100
Joakim Tjernlund joakim.tjernl...@transmode.se wrote:
Scott, listen to yourself. You are proposing
This patch http://patchwork.ozlabs.org/patch/72962/ included a boards.cfg
change, but it was omitted when applied as
f1c574d4006d81301792e70fafc31ff39259e793
This fixes the NAND SPL build on MPC8315ERDB.
Signed-off-by: Scott Wood scottw...@freescale.com
---
Applied to u-boot-nand-flash
On Tue, Dec 7, 2010 at 1:13 PM, Peter Tyser pty...@xes-inc.com wrote:
Hi Chris,
On Tue, 2010-12-07 at 10:48 +1300, Chris Packham wrote:
This adds support for the PCA9539 family of gpio devices which have 16
output pins. The devices are similar to chips that use the pca953x driver
except the
Hi Scott,
On Tue, Dec 7, 2010 at 8:23 AM, Scott Wood scottw...@freescale.com wrote:
On Thu, Dec 02, 2010 at 04:53:30AM -, Lei Wen wrote:
Seems original implementation forget to set the pointer to point
to the oobbuf, so when we want to see oob buf, we see nothing...
Fix it by get pointer
Seems original implementation forget to set the pointer to point
to the oobbuf, so when we want to see oob buf, we see nothing...
Fix it by get pointer as the oobbuf set.
Signed-off-by: Lei Wen lei...@marvell.com
---
Changelog:
V1: Initial patch
V2: remove the comment of oob data appended to
snip
You could do the same thing to the U-Boot pca953x driver.
Eg at the top you could add:
#ifdef CONFIG_PCA953X_16BIT
#define NGPIO = 16
#else
#define NGPIO = 8
#endif
I have a small problem with this due to the fact that we have some
designs here that use a pca9534 and a
On Tue, Dec 7, 2010 at 2:34 PM, Peter Tyser pty...@xes-inc.com wrote:
snip
You could do the same thing to the U-Boot pca953x driver.
Eg at the top you could add:
#ifdef CONFIG_PCA953X_16BIT
#define NGPIO = 16
#else
#define NGPIO = 8
#endif
I have a small problem with this due to
Hi, Stefano,
2010/12/7 Stefano Babic sba...@denx.de:
On 12/06/2010 11:57 AM, Jason Liu wrote:
Hi Jason,
Add initial support for mx53 with the following change,
- Add the iomux support and the pin definition,
- Add the regs definition, clean up some unused def from mx51,
- Add the low
Chris Packham wrote:
On Tue, Dec 7, 2010 at 2:34 PM, Peter Tyser pty...@xes-inc.com wrote:
snip
You could do the same thing to the U-Boot pca953x driver.
Eg at the top you could add:
#ifdef CONFIG_PCA953X_16BIT
#define NGPIO = 16
#else
#define NGPIO = 8
#endif
I have
Dear Joakim Tjernlund,
In message
of9ff97b1b.1fc2bd05-onc12577f2.d034-c12577f2.0002f...@transmode.se you
wrote:
though the loop is cumbersome and not easy as BDI tends to
flush the cache when it stops so you loose your stack.
Does it? On which architecture / processor is this?
Dear Deepak Saxena,
In message 4cfd863a.7070...@mentor.com you wrote:
commit 341764495180a712b9aaccfa0479b2ff7e44e35b
Author: Deepak Saxena deepak_sax...@mentor.com
Date: Mon Dec 6 15:52:07 2010 -0800
Honor /memory/reg node in DTB files
This patch adds code to the bootm path
On 12/07/2010 03:58 AM, Jason Liu wrote:
I know all this crap is for MX51 in the TO1 version, even if I do not
know if there are boards with this first version of the processor.
Probably we must maintain this stuff for compatibility. Really I would
like to remove it completely ;-).
Do you
Hi, Stefano,
2010/12/7 Stefano Babic sba...@denx.de:
On 12/07/2010 03:58 AM, Jason Liu wrote:
I know all this crap is for MX51 in the TO1 version, even if I do not
know if there are boards with this first version of the processor.
Probably we must maintain this stuff for compatibility.
76 matches
Mail list logo
