On 22/05/11 14:26, Reinhard Meyer wrote:
Dear Graeme Russ,
Hi All,
I've just had a good look through the timer API code with the view of
rationalising it and fixing up some of the inconsistencies. What I found
was a little scarier than I expected! Anyway, here is a write-up of what I
found
On 5/21/2011 9:26 PM, Reinhard Meyer wrote:
Dear Graeme Russ,
Hi All,
I've just had a good look through the timer API code with the view of
rationalising it and fixing up some of the inconsistencies. What I found
was a little scarier than I expected! Anyway, here is a write-up of what I
On 5/21/2011 11:23 PM, Graeme Russ wrote:
On 22/05/11 14:26, Reinhard Meyer wrote:
Dear Graeme Russ,
Hi All,
I've just had a good look through the timer API code with the view of
rationalising it and fixing up some of the inconsistencies. What I found
was a little scarier than I expected!
On 22/05/11 17:21, J. William Campbell wrote:
On 5/21/2011 11:23 PM, Graeme Russ wrote:
On 22/05/11 14:26, Reinhard Meyer wrote:
- shall not be used for delays in the seconds range and longer
(or any other limit we see practical)
Any udelay up to the full range of a ulong should be handled
Dear J. William Campbell,
please demonstrate for me (and others), by a practical example,
how _any_ arithmetic (even less with just shifts and multiplies)
can convert a free running 3.576 MHz (wild example) free running
32 bit counter (maybe software extended to 64 bits) into a ms
value that will
On Saturday, May 21, 2011 02:03:24 AM Marek Vasut wrote:
On Wednesday, April 06, 2011 11:49:09 PM Michael Schwingen wrote:
Signed-off-by: Michael Schwingen mich...@schwingen.org
---
Changes for V2:
- move -ffunction-sections/--gc-sections to board config.mk
- add wildcard to bss
On Wednesday, April 06, 2011 11:49:07 PM Michael Schwingen wrote:
Signed-off-by: Michael Schwingen mich...@schwingen.org
---
Changes for V3:
- new in V3, replaces config.mk files in earlier patches
Changes for V4:
- add changelog
arch/arm/config.mk |6 ++
1 files changed, 6
Am 05/21/2011 01:58 AM, schrieb Marek Vasut:
-int timer_init (void)
+unsigned long long get_ticks(void)
{
-/* install interrupt handler for timer */
-irq_install_handler(IXP425_TIMER_2_IRQ, timer_isr, (void *)timestamp);
-
-/* setup the Timer counter value */
-
Am 05/21/2011 02:03 AM, schrieb Marek Vasut:
-int board_init (void)
+int board_early_init_f(void)
+{
+/* CS5: Debug port */
+writel(0x9d520003, IXP425_EXP_CS5);
+/* CS6: HwRel */
+writel(0x81860001, IXP425_EXP_CS6);
+/* CS7: LEDs */
+writel(0x8093,
Hello,
It seems that bank 8 is missing in
[u-boot.git] http://e2e.ti.com/cgi-bin/gitweb.cgi?p=u-boot.git;a=tree /
arch http://e2e.ti.com/cgi-bin/gitweb.cgi?p=u-boot.git;a=tree;f=arch
/ armhttp://e2e.ti.com/cgi-bin/gitweb.cgi?p=u-boot.git;a=tree;f=arch/arm/
Am 05/21/2011 02:06 AM, schrieb Marek Vasut:
+/* Setup GPIO's for 33MHz clock output */
+GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK);
+GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK);
+writel(0x01FF01FF, IXP425_GPIO_GPCLKR);
+
+/* turn off all LEDs */
+writew(0x,
Dear Wolfgang Denk,
In message 1305969194-11721-1-git-send-email...@denx.de you wrote:
Commit e59e356 TFTP: net/tftp.c: add server mode receive caused the
size of some object files to grow which breaks the manually optimized
linking for the SPD823TS board. Adjust linker script as needed.
Dear Eric Cooper,
In message 1305941627-17522-1-git-send-email-...@cmu.edu you wrote:
This patch adds additional u-boot.* files mentioned in Makefile,
and adds *.bin since these are deleted as part of make clean.
Signed-off-by: Eric Cooper e...@cmu.edu
---
Changes since v1:
Added more
Am 05/22/2011 05:36 PM, schrieb Marek Vasut:
On Saturday, May 21, 2011 02:03:24 AM Marek Vasut wrote:
On Wednesday, April 06, 2011 11:49:09 PM Michael Schwingen wrote:
Signed-off-by: Michael Schwingen mich...@schwingen.org
---
Changes for V2:
- move -ffunction-sections/--gc-sections to
Signed-off-by: Michael Schwingen mich...@schwingen.org
---
Changes for V3:
- new in V3, replaces config.mk files in earlier patches
Changes for V4:
- add changelog
Changes for V5:
arch/arm/config.mk |7 +++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git
Signed-off-by: Michael Schwingen mich...@schwingen.org
---
Changes for V2:
Changes for V3:
- change patch description
- drop wepep250 (should already be deleted)
Changes for V4:
- add changelog
Changes for V5:
MAINTAINERS | 44 ++--
1 files changed,
Signed-off-by: Michael Schwingen mich...@schwingen.org
---
Changes for V3:
- new in V3 (split from update_fix some more IXP42x boards in V2)
Changes for V4:
- add changelog
Changes for V5:
board/prodrive/pdnb3/config.mk |2 --
include/configs/pdnb3.h| 10 +++---
2 files
Signed-off-by: Michael Schwingen mich...@schwingen.org
---
Changes for V2:
Changes for V3:
Changes for V4:
- add changelog
Changes for V5:
arch/arm/cpu/ixp/npe/Makefile |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch/arm/cpu/ixp/npe/Makefile
Signed-off-by: Michael Schwingen mich...@schwingen.org
---
Changes for V2:
Changes for V3:
- coding style / indentation cleanup
- move config.h changes to AcTux2/AcTux3 board patches
Changes for V4:
- add changelog
Changes for V5:
arch/arm/cpu/ixp/npe/npe.c | 67
Signed-off-by: Michael Schwingen mich...@schwingen.org
---
Changes for V2:
Changes for V3:
- coding style fixes
Changes for V4:
- add changelog
Changes for V5:
drivers/serial/serial_ixp.c |7 +--
1 files changed, 5 insertions(+), 2 deletions(-)
diff --git
Signed-off-by: Michael Schwingen mich...@schwingen.org
---
Changes for V2:
- move -ffunction-sections/--gc-sections to board config.mk
- add wildcard to bss segment in linker script
Changes for V3:
- use I/O accessors
- coding style fixes
- add PCI clock/reset initialization
- use
Signed-off-by: Michael Schwingen mich...@schwingen.org
---
Changes for V2:
Changes for V3:
- reformat to wrap long lines
Changes for V4:
- add changelog
Changes for V5:
arch/arm/cpu/ixp/npe/npe.c |7 +--
1 files changed, 5 insertions(+), 2 deletions(-)
diff --git
Signed-off-by: Michael Schwingen mich...@schwingen.org
---
Changes for V2:
- move -ffunction-sections/--gc-sections to board config.mk
- add wildcard to bss segment in linker script
Changes for V3:
- use I/O accessors
- coding style fixes
- use get_ram_size in dram_init
- remove config.mk
-
Signed-off-by: Michael Schwingen mich...@schwingen.org
---
Changes for V2:
- move -ffunction-sections/--gc-sections to board config.mk
- add wildcard to bss segment in linker script
Changes for V3:
- use I/O accessors
- coding style fixes
- use get_ram_size in dram_init
- remove config.mk
-
Signed-off-by: Michael Schwingen mich...@schwingen.org
---
Changes for V2:
- move -ffunction-sections/--gc-sections to board config.mk
- add wildcard to bss segment in linker script
- add ethprime/ethrotate to default environment
Changes for V3:
- use I/O accessors
- coding style fixes
- add
Signed-off-by: Michael Schwingen mich...@schwingen.org
---
Changes for V2:
- remove changes from config.mk and board config.h files
- add wildcards to sections in arch/arm/cpu/ixp/u-boot.lds
Changes for V3:
- set compiler/linker flags in arch/arm/cpu/ixp/config.mk instead of
per-board
Hi,
this is V5 of the IXP42x patch series - it is now based on Marek's
u-boot-pxa.git, with one additional fix:
- fix one missing I/O accessor in get_ticks() in Patch #0004
cu
Michael
Michael Schwingen (17):
add XScale sub architecture (IXP/PXA) to maintainer list
add support for IXP42x
- jump to real flash location after reset before turning off flash mirror
- fix timer system to use HZ == 1000, remove broken interrupt-based code
Signed-off-by: Michael Schwingen mich...@schwingen.org
---
Changes for V2:
- fix patch description
Changes for V3:
- use I/O accessors
- move
clean up IXP PCI handling: get rid of IXP-private bus scan, BAR assign etc.
code and use u-boot's PCI infrastructure instead. Move board-specific PCI
setup code (clock/reset) to board directory.
Signed-off-by: Michael Schwingen mich...@schwingen.org
---
Changes for V3:
- new in V3
Changes for
Signed-off-by: Michael Schwingen mich...@schwingen.org
---
Changes for V2:
Changes for V3:
- coding style / indentation cleanup
- move config.h changes to AcTux2/AcTux3 board patches
Changes for V4:
- add changelog
Changes for V5:
board/actux4/actux4.c| 103
Signed-off-by: Michael Schwingen mich...@schwingen.org
---
Changes for V3:
- new in V3 (split from update_fix some more IXP42x boards in V2)
Changes for V4:
- add changelog
Changes for V5:
board/ixdp425/config.mk|2 -
board/ixdp425/flash.c | 427
Dear Reinhard,
On Sun, May 22, 2011 at 6:15 PM, Reinhard Meyer
u-b...@emk-elektronik.de wrote:
Dear J. William Campbell,
please demonstrate for me (and others), by a practical example,
how _any_ arithmetic (even less with just shifts and multiplies)
can convert a free running 3.576 MHz (wild
On 5/22/2011 1:15 AM, Reinhard Meyer wrote:
Dear J. William Campbell,
please demonstrate for me (and others), by a practical example,
how _any_ arithmetic (even less with just shifts and multiplies)
can convert a free running 3.576 MHz (wild example) free running
32 bit counter (maybe software
On 5/22/2011 5:02 PM, Graeme Russ wrote:
Dear Reinhard,
On Sun, May 22, 2011 at 6:15 PM, Reinhard Meyer
u-b...@emk-elektronik.de wrote:
Dear J. William Campbell,
please demonstrate for me (and others), by a practical example,
how _any_ arithmetic (even less with just shifts and
On Sunday, May 22, 2011 09:15:03 PM Michael Schwingen wrote:
Am 05/21/2011 01:58 AM, schrieb Marek Vasut:
-int timer_init (void)
+unsigned long long get_ticks(void)
{
- /* install interrupt handler for timer */
- irq_install_handler(IXP425_TIMER_2_IRQ, timer_isr, (void
On Monday, May 23, 2011 12:00:02 AM Michael Schwingen wrote:
Signed-off-by: Michael Schwingen mich...@schwingen.org
---
Honestly, I don't really understand this one ... Wolfgang, is this one OK to
merge ?
Changes for V3:
- new in V3, replaces config.mk files in earlier patches
Changes for
Hi Bill,
On Mon, May 23, 2011 at 10:14 AM, J. William Campbell
jwilliamcampb...@comcast.net wrote:
On 5/22/2011 1:15 AM, Reinhard Meyer wrote:
Dear J. William Campbell,
please demonstrate for me (and others), by a practical example,
how _any_ arithmetic (even less with just shifts and
OK, so in summary, we can (in theory) have:
- A timer API in /lib/ with a single u32 get_timer(u32 base) function
- A HAL with two functions
- u32 get_raw_ticks()
- u32 get_raw_tick_rate() which returns the tick rate in kHz (which
max's out at just after 4GHz)
- A helper function in
Dear J. William Campbell,
On 5/22/2011 1:15 AM, Reinhard Meyer wrote:
Dear J. William Campbell,
please demonstrate for me (and others), by a practical example,
how _any_ arithmetic (even less with just shifts and multiplies)
can convert a free running 3.576 MHz (wild example) free running
Firma: EXPRESS LOGISTIC GROUP
Position: Versandmanager
Kategorie: Versand/Manager
Arbeitszeit: Heimarbeit/Teilzeitbesch.ftigung
Ort: Deutschland
Vergutung: 1.890 Euro monatlich + Bonus
Erfahrung: nicht erforderlich
Ausbildung: keine
Sehr geehrten Damen und Herren!
Wir freuen uns, Ihnen
On 5/22/2011 6:42 PM, Graeme Russ wrote:
OK, so in summary, we can (in theory) have:
- A timer API in /lib/ with a single u32 get_timer(u32 base) function
- A HAL with two functions
- u32 get_raw_ticks()
- u32 get_raw_tick_rate() which returns the tick rate in kHz (which
On 5/22/2011 8:26 PM, Reinhard Meyer wrote:
Dear J. William Campbell,
On 5/22/2011 1:15 AM, Reinhard Meyer wrote:
Dear J. William Campbell,
please demonstrate for me (and others), by a practical example,
how _any_ arithmetic (even less with just shifts and multiplies)
can convert a free
On Mon, May 23, 2011 at 3:02 PM, J. William Campbell
jwilliamcampb...@comcast.net wrote:
On 5/22/2011 6:42 PM, Graeme Russ wrote:
OK, so in summary, we can (in theory) have:
- A timer API in /lib/ with a single u32 get_timer(u32 base) function
- A HAL with two functions
- u32
Hi
I am adding boot support from OneNand for OMAP3430 SoC- based zeus board in
uboot. While compiling the code, start.S gets copied from
arch/arm/cpu/armv7/ to onenand_ipl/board/zeus/location and then I get
the following error.
start.o: In function `call_board_init_f':
44 matches
Mail list logo
