Make the fixup matchable with dts and kernel.
Update the compatible from fsl,flexcan-v1.0 to fsl,p1010-flexcan and
Change the clock-freq property to clock-frequency.
We also change flexcan frequency from CCB-clock to CCB-clock/2 according
to P1010 spec.
We now keep the old interfaces to make
Hi Macpaul,
On Tue, Nov 15, 2011 at 11:34 AM, Macpaul Lin macp...@gmail.com wrote:
HI Lei Wen,
2011/11/14 Lei Wen adrian.w...@gmail.com:
Hi Macpaul,
It seems some socs always treat cmd8 as failed...?
I think it is reasonable to add a quirk configuration surround the
judgement
of cmd8
Hi Lei Wen,
2011/11/15 Lei Wen adrian.w...@gmail.com:
Hi Macpaul,
Figure 6.1
http://i.imgur.com/bmoAX.jpg
Figure 6.2
http://i.imgur.com/7fxdx.jpg
As you can see, after the power ramp up to 74 clocks (1msec), the CMD0
can be send to the card.
So it seems your controller will do power
Cc: Simon Glass s...@chromium.org
Cc: Mike Frysinger vap...@gentoo.org
Signed-off-by: Wolfgang Grandegger w...@denx.de
---
drivers/usb/eth/smsc95xx.c | 10 +++---
1 files changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/eth/smsc95xx.c b/drivers/usb/eth/smsc95xx.c
index
Changes since v1:
- Use __get_unaligned_le16/32 as suggested by Mike Frysinger.
- Use format %pM to print ethernet address.
- Drop third patch as it is not really required/useful.
Wolfgang Grandegger (2):
smsc95xx: Fix MAC address programming
smsc95xx: Debug message cleanup
Commit 79ad54400932d6484178a372fb3b659e3437473b broke MAC address
programming in the SMSC95xx register set.
Cc: Marek Vasut marek.va...@gmail.com
Cc: Wolfgang Denk w...@denx.de
Cc: Simon Glass s...@chromium.org
Cc: Mike Frysinger vap...@gentoo.org
Signed-off-by: Wolfgang Grandegger w...@denx.de
On 11/14/2011 05:50 PM, Mike Frysinger wrote:
On Monday 14 November 2011 03:25:37 Wolfgang Grandegger wrote:
On 11/11/2011 04:18 PM, Mike Frysinger wrote:
mine might take a little longer due to wrangling with wolfgang. i'd
suggest we go with your patch (although i have feedback on it).
From datasheet, when READY bit is set inside PM_CTRL register, it means that
device is already in *normal* (D0) mode = it doesn't need to be wake-up.
With this patch, we only wake-up (writing on TEST_BYTE register) if PM_MODE
bits of PM_CTRL register is in sleep (D1/D2) mode.
Improve code
This reverts commit 02f3029f1810b99869254d0cf0a71946a008a728.
This patch add 3 times retry to CMD8 because the Marvell mmc controller
doesn't obey the power ramp up process in the SD specification 6.4.1.
(Please refer to figure 6.1 and 6.2 in the specification.)
The CMD0 should be send after
On Tue, Nov 15, 2011 at 5:35 PM, Macpaul Lin macp...@andestech.com wrote:
This reverts commit 02f3029f1810b99869254d0cf0a71946a008a728.
This patch add 3 times retry to CMD8 because the Marvell mmc controller
doesn't obey the power ramp up process in the SD specification 6.4.1.
(Please refer
On Mon, Nov 14, 2011 at 6:42 PM, Marek Vasut marek.va...@gmail.com wrote:
On Sun, Nov 13, 2011 at 12:35 AM, Marek Vasut marek.va...@gmail.com wrote:
The mmc host controller on the i.mx6q is called usdhc which
is redesigned based on the freescale esdhc controller.
The usdhc controller is
On Mon, Nov 14, 2011 at 6:45 PM, Marek Vasut marek.va...@gmail.com wrote:
On Mon, Nov 14, 2011 at 7:11 AM, Marek Vasut marek.va...@gmail.com wrote:
i.MX6Q is freescale quad core processors with ARM cortex_a9 complex.
This patch is to add the initial support for this processor.
On Mon, Nov 14, 2011 at 7:49 PM, Stefano Babic sba...@denx.de wrote:
On 11/14/2011 10:42 AM, Jason Hui wrote:
All get_usdhcX function are identical, except for two masks
(MXC_CCM_CSCDR1_USDHCx_PODF_MASK and MXC_CCM_CSCMR1_USDHCx_CLK_SEL).
Merge them in a get_usdhc_clk(usdhc_number)
Yes,
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Sandeep Paulraj s-paul...@ti.com
---
arch/arm/cpu/arm926ejs/davinci/Makefile|2 +-
.../arm/cpu/arm926ejs/davinci/pinmux.c |0
arch/arm/include/asm/arch-davinci/hardware.h |2 ++
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Stefano Babic sba...@denx.de
Cc: Heiko Schocher h...@denx.de
---
.gitignore |1 +
Makefile |7 +++
2 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/.gitignore b/.gitignore
index 70a11f7..1c5defd 100644
Support for variable length images like AIS image was introduced
in commit f0662105b674a3874227316abf8536bebc9b5995. A parameter
-s was also introduced to prohibit copying of the image file
automatically in the main program. However, this parameter
was implemented incorrectly and the image file
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Heiko Schocher h...@denx.de
Cc: Sandeep Paulraj s-paul...@ti.com
---
arch/arm/cpu/arm926ejs/davinci/Makefile |3 ++-
arch/arm/cpu/arm926ejs/davinci/spl.c| 11 ++-
2 files changed, 12 insertions(+), 2 deletions(-)
This patch replaces the pinmuxing functions from
arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c by those of
arch/arm/cpu/arm926ejs/davinci/pinmux.c
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Heiko Schocher h...@denx.de
Cc: Sandeep Paulraj s-paul...@ti.com
---
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Wolfgang Denk w...@denx.de
---
arch/arm/lib/eabi_compat.c |3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/arch/arm/lib/eabi_compat.c b/arch/arm/lib/eabi_compat.c
index eb3e26d..2d49a28 100644
---
The code does not actually load u-boot from the SPI flash but
rather illustrates how SPL support for this board could look like.
This patch is for discussion only.
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Heiko Schocher h...@denx.de
Cc: Sandeep Paulraj s-paul...@ti.com
Cc:
This patch fixes the clear_bss loop for bss sections that have
zero length, i.e., where __bss_start == __bss_end__.
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Albert Aribaud albert.u.b...@aribaud.net
---
arch/arm/cpu/arm926ejs/start.S |8 +---
1 files changed, 5
Hi all,
Heiko Schocher added patches for the low level configuration
of the DA850 SoCs and I would like to use this code on my board. At the
same time I would like to add support for this low level configuration
for the da850evm board. This makes it possible to test/use the
lowlevel functions also
On 11/15/2011 11:10 AM, Jason Hui wrote:
yes, we already had drivers/gpio/mxc_gpio.c driver. In this driver, we will
use this structure. And it's the same as i.mx5 before.
So why do you need to expose the structure, isn't it internal to the driver?
Yes, it's internal to the gpio driver, but,
On 11/15/2011 10:46 AM, Jason Hui wrote:
Well this is insane, is the datasheet for mx6q available already so I can
check
for myself?
This is mx6q usdhc design and datasheet is not public now.
Without this, the mmc driver does not work.
Can you at least add a useful comment explaining why
From datasheet, when READY bit is set inside PM_CTRL register, it means that
device is already in *normal* (D0) mode = it doesn't need to be wake-up.
With this patch, we only wake-up (writing on TEST_BYTE register) if PM_MODE
bits of PM_CTRL register is in sleep (D1/D2) mode.
Signed-off-by:
Hi,
I am trying to boot beagle board by uart
can anybody help me on this issue?
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
-Original Message-
From: u-boot-boun...@lists.denx.de
[mailto:u-boot-boun...@lists.denx.de] On Behalf Of Premi, Sanjeev
Sent: Tuesday, November 15, 2011 12:15 PM
To: Tom Rini
Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] [PATCH 0/2] omap3evm: Add support for
EFI partitions
From datasheet, when READY bit is set inside PM_CTRL register, it means that
device is already in *normal* (D0) mode = it doesn't need to be wake-up.
With this patch, we only wake-up (writing on TEST_BYTE register) if PM_MODE
bits of PM_CTRL register is in sleep (D1/D2) mode.
Signed-off-by:
After enabling CONFIG_EFI_PARTITION, following errors were
noticed.
part_efi.c: In function 'print_part_efi':
part_efi.c:133:5: warning: passing argument 3 of 'is_gpt_valid'
from incompatible pointer type
part_efi.c:95:12: note: expected 'struct gpt_header *' but arg
ument is of type 'struct
Fix errors noticed after enabling CONFIG_EFI_PARTITION
for the OMAP3 EVM board:
part_efi.c: In function 'print_part_efi':
part_efi.c:133:5: warning: passing argument 3 of 'is_gpt_valid'
from incompatible pointer type
part_efi.c:95:12: note: expected 'struct gpt_header *' but arg
ument is of type
Defines CONFIG_EFI_PARTITION for OMAP3 EVM.
Signed-off-by: Sanjeev Premi pr...@ti.com
Cc: Sandeep Paulraj s-paul...@ti.com
Cc: Tom Rini tom.r...@gmail.com
---
Changes since v1:
* Removed definition of CONFIG_SYS_CACHELINE_SIZE as it
is no longer needed - since ARCH_DMA_MINALIGN is being
Hello all,
I guess most of you will already have noticed that my activity on the
mailing list has significantly declined recently. I'm sorry for that,
but I find myself in a situation where I have even less time
available for U-Boot than usually. In the result, the number of
unapplied (and
The following changes since commit 06194b6b65f701a9d6ef2d9b4123c4afe57d8783:
Nagabhushana Netagunte (1):
da850: add new config file for AM18xx
are available in the git repository at:
git://git.denx.de/u-boot-ti.git master
Heiko Schocher (3):
arm, davinci: da850/dm365 lowlevel
Configure the pins as GPIO prior to using gpio_get_value.
Cc: Jason Liu r64...@freescale.com
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
board/freescale/mx53loco/mx53loco.c |3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git
Configure the pins as GPIO prior to using gpio_get_value.
Cc: Jason Liu r64...@freescale.com
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
board/freescale/mx53evk/mx53evk.c |3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mx53evk/mx53evk.c
Configure the pins as GPIO prior to using gpio_get_value.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
board/freescale/mx53ard/mx53ard.c |3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mx53ard/mx53ard.c
Configure the pins as GPIO prior to using gpio_get_value.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
board/freescale/mx53smd/mx53smd.c |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mx53smd/mx53smd.c
b/board/freescale/mx53smd/mx53smd.c
Configure the pins as GPIO prior to using gpio_get_value.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
board/freescale/mx51evk/mx51evk.c |3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mx51evk/mx51evk.c
Acked-by: Mike Frysinger vap...@gentoo.org
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Acked-by: Mike Frysinger vap...@gentoo.org
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On Tue, Nov 15, 2011 at 3:37 AM, Christian Riesch
christian.rie...@omicron.at wrote:
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Wolfgang Denk w...@denx.de
---
arch/arm/lib/eabi_compat.c | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git
Fix:
usbdev.c: In function 'process_endpoints':
usbdev.c:29:12: warning: variable 'temp1' set but not used
[-Wunused-but-set-variable]
usbdev.c:29:6: warning: variable 'temp' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Stefan Roese s...@denx.de
---
Fix:
usb_ohci.c: In function 'dl_transfer_length':
usb_ohci.c:756:8: warning: variable 'tdINFO' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Stefan Roese s...@denx.de
---
arch/powerpc/cpu/ppc4xx/usb_ohci.c |3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
diff --git
Fix:
4xx_enet.c: In function 'ppc_4xx_eth_init':
4xx_enet.c:875:6: warning: variable 'ethgroup' set but not used
[-Wunused-but-set-variable]
I used __maybe_unused here intentionally, since all other
alternatives to fix this compilation warning would result in more
ifdef's.
Signed-off-by: Stefan
Fix:
4xx_pcie.c: In function 'pcie_read_config':
4xx_pcie.c:230:6: warning: variable 'address' set but not used
[-Wunused-but-set-variable]
4xx_pcie.c: In function 'pcie_write_config':
4xx_pcie.c:290:6: warning: variable 'address' set but not used
[-Wunused-but-set-variable]
4xx_pcie.c: In
Fix:
4xx_ibm_ddr2_autocalib.c: In function 'get_membase':
4xx_ibm_ddr2_autocalib.c:157:8: warning: variable 'bxcf' set but not used
[-Wunused-but-set-variable]
4xx_ibm_ddr2_autocalib.c: In function 'DQS_calibration_methodB':
4xx_ibm_ddr2_autocalib.c:722:8: warning: variable 'rffd' set but not
Fix:
44x_spd_ddr.c: In function 'program_cfg0':
44x_spd_ddr.c:384:16: warning: variable 'dimm_64bit' set but not used
[-Wunused-but-set-variable]
44x_spd_ddr.c:383:16: warning: variable 'dimm_32bit' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Stefan Roese s...@denx.de
---
Fix:
cmd_ecctest.c: In function 'inject_ecc_error':
cmd_ecctest.c:116:6: warning: variable 'val' set but not used
[-Wunused-but-set-variable]
cmd_ecctest.c: In function 'rewrite_ecc_parity':
cmd_ecctest.c:154:6: warning: variable 'val' set but not used
[-Wunused-but-set-variable]
Signed-off-by:
Fix:
40x_spd_sdram.c: In function 'spd_sdram':
40x_spd_sdram.c:137:6: warning: variable 'sdram0_b3cr' set but not used
[-Wunused-but-set-variable]
40x_spd_sdram.c:136:6: warning: variable 'sdram0_b2cr' set but not used
[-Wunused-but-set-variable]
40x_spd_sdram.c:129:6: warning: variable
Fix:
sata_dwc.c: In function 'sata_dwc_softreset':
sata_dwc.c:444:5: warning: variable 'status' set but not used
[-Wunused-but-set-variable]
sata_dwc.c:443:6: warning: variable 'serror' set but not used
[-Wunused-but-set-variable]
sata_dwc.c: In function 'scan_sata':
sata_dwc.c:654:16: warning:
44x_spd_ddr2.c: In function 'initdram':
44x_spd_ddr2.c:450:17: warning: variable 'dimm_spd' set but not used
[-Wunused-but-set-variable]
44x_spd_ddr2.c: In function 'program_copt1':
44x_spd_ddr2.c:1003:16: warning: variable 'ddrtype' set but not used
[-Wunused-but-set-variable]
44x_spd_ddr2.c:
Thierry Reding wrote at Tuesday, November 15, 2011 12:19 AM:
NVIDIA's flashing tools assume that the bootloader is loaded at address
0x00108000. Instead of requiring non-standard builds of those tools
which allow a load address of 0x00E08000, this commit just switches all
Tegra2 boards to use
Fix:
20001122-1.c: In function 'fpu_post_test_math1':
20001122-1.c:37:22: warning: variable 'p' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Stefan Roese s...@denx.de
---
post/lib_powerpc/fpu/20001122-1.c |3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
diff --git
Fix:
dlvision-10g.c: In function 'print_fpga_info':
dlvision-10g.c:90:11: warning: variable 'feature_compression' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Stefan Roese s...@denx.de
---
board/gdsys/405ep/dlvision-10g.c |2 --
1 files changed, 0 insertions(+), 2
Fix:
nand_boot.c: In function 'nand_read_page':
nand_boot.c:190:6: warning: variable 'stat' set but not used
[-Wunused-but-set-variable]
nand_boot.c: In function 'nand_boot':
nand_boot.c:271:6: warning: variable 'ret' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Stefan Roese
Fix:
cmd_pci405.c: In function 'do_loadpci':
cmd_pci405.c:45:6: warning: variable 'status' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Stefan Roese s...@denx.de
---
board/esd/pci405/cmd_pci405.c |3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
diff --git
Fix:
iop480_uart.c: In function 'serial_init':
iop480_uart.c:137:16: warning: variable 'val' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Stefan Roese s...@denx.de
---
arch/powerpc/cpu/ppc4xx/iop480_uart.c |3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
diff --git
Fix:
../common/auto_update.c: In function 'au_check_header_valid':
../common/auto_update.c:94:16: warning: variable 'checksum' set but not used
[-Wunused-but-set-variable]
../common/auto_update.c: In function 'do_auto_update':
../common/auto_update.c:400:30: warning: variable 'got_ctrlc' set but
Fix:
cmd_dasa_sim.c: In function 'updatePci9054':
cmd_dasa_sim.c:135:6: warning: variable 'val' set but not used
[-Wunused-but-set-variable]
cmd_dasa_sim.c: In function 'clearPci9054':
cmd_dasa_sim.c:189:6: warning: variable 'val' set but not used
[-Wunused-but-set-variable]
Signed-off-by:
Fix:
mip405.c: In function 'init_sdram':
mip405.c:250:4: warning: variable 'tctp_clocks' set but not used
[-Wunused-but-set-variable]
mip405.c: In function 'initdram':
mip405.c:629:9: warning: variable 'ds' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Stefan Roese s...@denx.de
Fix:
pip405.c: In function 'board_early_init_f':
pip405.c:192:16: warning: variable 'tctp_clocks' set but not used
[-Wunused-but-set-variable]
pip405.c:182:16: warning: variable 'dataout' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Stefan Roese s...@denx.de
---
On 15.11.2011 09:48, Igor Grinberg wrote:
On 11/15/11 09:25, Vladimir Zapolskiy wrote:
Hi Igor,
On 15.11.2011 08:42, Igor Grinberg wrote:
Hi Vladimir,
On 11/14/11 19:43, Vladimir Zapolskiy wrote:
This change adds a basic support for Embest/Timll DevKit3250 board,
NOR and UART are the only
Tested-by: Anton Staaf robot...@chromium.org
Mike, do you think you could pull this into staging as per Wolfgang's
recent request for help?
Thanks,
Anton
On Sun, Oct 30, 2011 at 8:44 AM, Mike Frysinger vap...@gentoo.org wrote:
Acked-by: Mike Frysinger vap...@gentoo.org
-mike
Hello Vipin
Now I have spent the whole day on trying to mount the device from Linux
as a read/write partition but without luck.
Ideally, it should have happened now
Setting FORCE_WORD_WRITE to 1 in the cfi_cmdset_0001.c fixes the problem.
#define FORCE_WORD_WRITE 1
but it is set to 0 by
Yes, USE_PRIVATE_LIBGCC=yes is needed for any U-Boot Tegra build, regardless.
It has to do with lib functions executing on the ARM7TDMI (AVP) IIRC.
Tom
-Original Message-
From: Stephen Warren
Sent: Tuesday, November 15, 2011 11:03 AM
To: Thierry Reding; u-boot@lists.denx.de
Cc: Tom
Hi Stefano,
Le 11/11/2011 11:40, Stefano Babic a écrit :
Hi Albert,
please pull from u-boot-imx.
The following changes since commit 06194b6b65f701a9d6ef2d9b4123c4afe57d8783:
da850: add new config file for AM18xx (2011-11-10 16:30:41 +0100)
are available in the git repository at:
Hi Marek,
Le 12/11/2011 03:44, Marek Vasut a écrit :
Hi Albert,
I chose a few significant patches that should make it to .12.
The following changes since commit 06194b6b65f701a9d6ef2d9b4123c4afe57d8783:
da850: add new config file for AM18xx (2011-11-10 16:30:41 +0100)
are available in
Hi Sandeep,
Le 15/11/2011 16:11, s-paul...@ti.com a écrit :
The following changes since commit 06194b6b65f701a9d6ef2d9b4123c4afe57d8783:
Nagabhushana Netagunte (1):
da850: add new config file for AM18xx
are available in the git repository at:
git://git.denx.de/u-boot-ti.git
Hi Wolfgang,
The following changes since commit 5721385b187b3154c7768e6c182501022f4e2e45:
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08
07:44:52 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Alexander Holler (1):
Hello Albert,
I kindly ask you to pick up these changes based on u-boot-arm/next.
Thank you very much in advance.
On 14.11.2011 19:43, Vladimir Zapolskiy wrote:
This patchset adds generic NXP LPC32XX SoC support and basic support
for Embest/Timll DevKit3250 board, which powered by this SoC.
On 11/02/2011 08:30 PM, Andy Fleming wrote:
On Mon, Oct 31, 2011 at 11:51 AM, Stephen Warren swar...@nvidia.com wrote:
Pass the GPIO numbers for power and card detect to tegra2_mmc_init(), and
modify that function to perform all required GPIO initialization. This
removes the need for board
On 10/11/2011 06:07 PM, Simon Glass wrote:
Hi Stephen,
On Thu, Oct 6, 2011 at 3:52 PM, Stephen Warren swar...@nvidia.com wrote:
... rather than open-coding the register accesses.
However, gpio_request() typically stores the label parameter in a global
data structure. This causes problems
On Tuesday 15 November 2011 13:01:52 Stefan Roese wrote:
--- a/arch/powerpc/cpu/ppc4xx/usbdev.c
+++ b/arch/powerpc/cpu/ppc4xx/usbdev.c
- int temp, temp1;
...
/*copy packet */
setup_packet_pt[0] = *(unsigned int *)USB2D0_FIFO_0;
Dear Graeme,
In message calbutcjfyqwb4ttf_nwjgk6haceeb1pntqzufk_npxwts3c...@mail.gmail.com
you wrote:
My recent x86 cleanup added a small, but very nasty, bug at line 231 of
arch/x86/lib/board.c:
offset_ptr_ram = offset_ptr_rom + gd-reloc_off
Because offset_ptr_rom is a pointer,
Hello Wolfgang,
The following changes since commit 5721385b187b3154c7768e6c182501022f4e2e45:
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08
07:44:52 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-video.git master
Che-Liang Chiou (4):
Hi Thierry.
On Mon, Nov 14, 2011 at 11:19 PM, Thierry Reding
thierry.red...@avionic-design.de wrote:
NVIDIA's flashing tools assume that the bootloader is loaded at address
0x00108000. Instead of requiring non-standard builds of those tools
which allow a load address of 0x00E08000, this commit
Thierry Reding wrote at Tuesday, November 15, 2011 12:27 AM:
The Medcom is a 16:9 15 terminal that is used for patient infotainment
in hospitals.
...
+/*
+ * Routine: gpio_config_uart
+ * Description: Does nothing on Medcom - no conflict w/SPI.
+ */
+void gpio_config_uart(void)
+{
+}
I'd
These patches can also be pulled from
git://git.denx.de/u-boot-video.git gcc46-warning-fixes
Anatolij Gustschin (12):
drivers/spi/atmel_spi.c: Fix GCC 4.6 warning
drivers/mtd/dataflash.c: Fix GCC 4.6 warning
drivers/net/at91_emac.c: Fix GCC 4.6 warning
drivers/net/enc28j60.c: Fix GCC
Fix:
at91_emac.c: In function 'at91emac_write_hwaddr':
at91_emac.c:477:15: warning: variable 'dev' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
drivers/net/at91_emac.c |2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git
Fix:
flash.c: In function 'flash_erase':
flash.c:209:6: warning: variable 'flag' set but not used
[-Wunused-but-set-variable]
flash.c: In function 'write_data':
flash.c:373:6: warning: variable 'flag' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
Fix:
flash.c: In function 'flash_erase':
flash.c:209:6: warning: variable 'flag' set but not used
[-Wunused-but-set-variable]
flash.c: In function 'write_data':
flash.c:373:6: warning: variable 'flag' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
Fix:
da8xx-fb.c: In function 'video_hw_init':
da8xx-fb.c:688:6: warning: variable 'ret' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
drivers/video/da8xx-fb.c |3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
diff --git
Fix:
enc28j60.c: In function 'enc_receive':
enc28j60.c:435:5: warning: variable 'eir_reg' set but not used
[-Wunused-but-set-variable]
enc28j60.c: In function 'enc_poll':
enc28j60.c:503:5: warning: variable 'estat_reg' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin
Fix:
davinci_i2c.c: In function 'flush_rx':
davinci_i2c.c:81:6: warning: variable 'dummy' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
Cc: Heiko Schocher h...@denx.de
---
drivers/i2c/davinci_i2c.c |4 +---
1 files changed, 1 insertions(+), 3
Fix:
yaffs_guts.c: In function 'yaffs_CheckChunkErased':
yaffs_guts.c:854:6: warning: variable 'result' set but not used
yaffs_guts.c: In function 'yaffs_UpdateObjectHeader':
yaffs_guts.c:3463:6: warning: variable 'result' set but not used
yaffs_guts.c: In function 'yaffs_GrabChunkCache':
Fix:
s3c24x0_rtc.c: In function 'rtc_get':
s3c24x0_rtc.c:67:53: warning: variable 'a_armed' set but not used
s3c24x0_rtc.c:67:45: warning: variable 'a_year' set but not used
s3c24x0_rtc.c:67:38: warning: variable 'a_mon' set but not used
s3c24x0_rtc.c:67:30: warning: variable 'a_date' set but not
Fix:
bus_vcxk.c: In function 'vcxk_display_bitmap':
bus_vcxk.c:396:16: warning: variable 'compression' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
drivers/video/bus_vcxk.c |2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git
Fix:
pwm.c: In function 'pwm_config':
pwm.c:85:16: warning: variable 'timer_rate_hz' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
arch/arm/cpu/armv7/s5p-common/pwm.c |2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git
Hi Wolfgang,
On Tue, Nov 15, 2011 at 1:19 AM, Wolfgang Grandegger w...@denx.de wrote:
Commit 79ad54400932d6484178a372fb3b659e3437473b broke MAC address
programming in the SMSC95xx register set.
Cc: Marek Vasut marek.va...@gmail.com
Cc: Wolfgang Denk w...@denx.de
Cc: Simon Glass
On Tue, Nov 15, 2011 at 1:19 AM, Wolfgang Grandegger w...@denx.de wrote:
Cc: Simon Glass s...@chromium.org
Cc: Mike Frysinger vap...@gentoo.org
Signed-off-by: Wolfgang Grandegger w...@denx.de
---
drivers/usb/eth/smsc95xx.c | 10 +++---
1 files changed, 3 insertions(+), 7 deletions(-)
Hi Albert,
On Tue, Nov 15, 2011 at 1:28 PM, Albert ARIBAUD
albert.u.b...@aribaud.net wrote:
Hi Wolfgang,
The following changes since commit 5721385b187b3154c7768e6c182501022f4e2e45:
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08
07:44:52 +0100)
are available in
On Tue, Nov 15, 2011 at 7:56 PM, Stefano Babic sba...@denx.de wrote:
On 11/15/2011 10:46 AM, Jason Hui wrote:
Well this is insane, is the datasheet for mx6q available already so I can
check
for myself?
This is mx6q usdhc design and datasheet is not public now.
Without this, the mmc driver
On Tue, Nov 15, 2011 at 7:56 PM, Stefano Babic sba...@denx.de wrote:
On 11/15/2011 10:46 AM, Jason Hui wrote:
Well this is insane, is the datasheet for mx6q available already so I
can check for myself?
This is mx6q usdhc design and datasheet is not public now.
Without this, the mmc
On Tuesday 15 November 2011 13:01:52 Stefan Roese wrote:
--- a/arch/powerpc/cpu/ppc4xx/usbdev.c
+++ b/arch/powerpc/cpu/ppc4xx/usbdev.c
- int temp, temp1;
...
/*copy packet */
setup_packet_pt[0] = *(unsigned int *)USB2D0_FIFO_0;
Hi Albert,
On Tue, Nov 15, 2011 at 1:28 PM, Albert ARIBAUD
albert.u.b...@aribaud.net wrote:
Hi Wolfgang,
The following changes since commit
5721385b187b3154c7768e6c182501022f4e2e45:
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08
07:44:52 +0100)
Hi,
On Tue, Nov 15, 2011 at 6:27 PM, Marek Vasut marek.va...@gmail.com wrote:
Hi Albert,
On Tue, Nov 15, 2011 at 1:28 PM, Albert ARIBAUD
albert.u.b...@aribaud.net wrote:
Hi Wolfgang,
The following changes since commit
5721385b187b3154c7768e6c182501022f4e2e45:
Merge branch
On Tuesday 15 November 2011 22:45:52 Simon Glass wrote:
On Tue, Nov 15, 2011 at 6:27 PM, Marek Vasut wrote:
On Tue, Nov 15, 2011 at 1:28 PM, Albert ARIBAUD wrote:
Hi Wolfgang,
The following changes since commit
5721385b187b3154c7768e6c182501022f4e2e45:
Merge branch
Hi Mike,
On Tue, Nov 15, 2011 at 7:53 PM, Mike Frysinger vap...@gentoo.org wrote:
On Tuesday 15 November 2011 22:45:52 Simon Glass wrote:
On Tue, Nov 15, 2011 at 6:27 PM, Marek Vasut wrote:
On Tue, Nov 15, 2011 at 1:28 PM, Albert ARIBAUD wrote:
Hi Wolfgang,
The following changes
Sorry if this is already fixed somewhere - I could not find it.
This fixes these warnings:
usb_ohci.c: In function 'submit_control_msg':
usb_ohci.c:1081: warning: dereferencing pointer 'data_buf.76' does break
strict-aliasing rules
usb_ohci.c:1081: note: initialized from here
usb_ohci.c:1084:
Sorry if this is already fixed somewhere - I could not find it.
This fixes the warnings show below.
yaffs_tagscompat.c: In function
'yaffs_TagsCompatabilityReadChunkWithTagsFromNAND':
yaffs_tagscompat.c:151: warning: dereferencing pointer 'tu' does break
strict-aliasing rules
1 - 100 of 118 matches
Mail list logo