Ping.
2014-06-30 13:05 GMT+02:00 dirk.eib...@gdsys.cc:
From: Dirk Eibach dirk.eib...@gdsys.cc
Dirk Eibach (2):
ppc: Make ppc4xx ready for CONFIG_SYS_GENERIC_BOARD
board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards
arch/powerpc/cpu/ppc4xx/cpu_init.c | 2 ++
On Tue, 2014-07-22 at 18:01 -0400, Tom Rini wrote:
On Fri, Jul 18, 2014 at 08:38:41PM +0100, Ian Campbell wrote:
This enables the necessary clocks, in AHB0 and in PLL6_CFG. This is done
for sun7i only since I don't have access to any other sunxi platforms
with sata included.
The PHY
Hi York,
That what I saw in the code.
Also to test it you need to have the hardware, but the evaluation board
P2041rdb for example does not have some ECC signals rooted for DIMM slot.
I validated the patch that I sent on a board based on P2041 with 8GB of
memory. Obviously it works with 2GB
On Tue, 2014-07-22 at 12:45 -0700, Brian Norris wrote:
Then some sort of grepping/regex/etc. can get you the patchwork ID from
the Message-ID. e.g.:
pwclient list -m $MESSAGEID | awk '{print $1;}' | grep '[0-9][0-9]*'
Which version of pwclient do you use? The one from
On Wed, 2014-07-23 at 07:59 +0100, Ian Campbell wrote:
On Tue, 2014-07-22 at 18:01 -0400, Tom Rini wrote:
On Fri, Jul 18, 2014 at 08:38:41PM +0100, Ian Campbell wrote:
This enables the necessary clocks, in AHB0 and in PLL6_CFG. This is done
for sun7i only since I don't have access to
Tested with NOR boot and NAND boot on T2080QDS and T2080RDB.
Signed-off-by: Shengzhou Liu shengzhou@freescale.com
---
based on 'next' branch.
include/configs/T208xQDS.h | 2 ++
include/configs/T208xRDB.h | 2 ++
2 files changed, 4 insertions(+)
diff --git a/include/configs/T208xQDS.h
From: Tang Yuantian yuantian.t...@freescale.com
bootflag as a parameter is passed to board_init_f().
But it is not actually used in this function.
Make it effective by assigned it to gd-flags.
Signed-off-by: Tang Yuantian yuantian.t...@freescale.com
---
arch/powerpc/lib/board.c | 2 ++
1 file
(copying the mailing list - but please do this yourself from now on -
note you will need to join it first if you have not already)
Hi,
On 23 July 2014 03:20, Duxiaoqiang duxiaoqi...@huawei.com wrote:
Hi Simon
When I verified secure UBOOT with FIT image, I found a problem about
it, and
From: Tang Yuantian yuantian.t...@freescale.com
Add deep sleep support in SPI/SD boot. The destination address
second stage uboot image is loaded to is changed because
currently this address will be used by kernel which means
we can't reserve it for resume.
Entry point to kernel is still placed
On 22 July 2014 18:08, Chris Packham judge.pack...@gmail.com wrote:
file_size was being calculated using back-ticks but map_size uses
$(shell ...). Update the file_size calculation to use $(shell ...).
Signed-off-by: Chris Packham judge.pack...@gmail.com
Acked-by: Simon Glass
On 21 July 2014 12:21, Ian Campbell i...@hellion.org.uk wrote:
I happened to spot this while working in the area.
Signed-off-by: Ian Campbell i...@hellion.org.uk
Cc: Simon Glass s...@chromium.org
Acked-by: Simon Glass s...@chromium.org
(we normally add a blank line before return but I don't
Hi Iain,
On 10/06/2014 00:09, Iain Paton wrote:
Enable CONFIG_SYS_GENERIC_BOARD to remove warning on boot.
Signed-off-by: Iain Paton ipat...@gmail.com
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=
On 09/07/2014 21:13, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
The PFD issue is not present on mx6solox, so skip it in this case.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
On 09/07/2014 21:13, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=
DENX
On 09/07/2014 22:59, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
There is no need to keep iomuxc_base_regs structure as it serves the exact
same
purpose of the iomuxc structure, which is to provide access to the GPR
registers.
The additional fields of
On 09/07/2014 22:59, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
On mx6solox there is an additional 0x4000 offset for the GPR registers.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
On 12/07/2014 15:39, Marek Vasut wrote:
As a result of 0defddc851edfc34bcf3c3379fe74b11dc01a493 , which did
a consolidation of the prompt string, this ifdef became empty. Remove
it.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Tom Rini tr...@ti.com
Cc: Stefano Babic sba...@denx.de
---
Hi Heiko,
On 18/07/2014 06:07, Heiko Schocher wrote:
All series applied with the following change due to inclusion Fabios's
cleanup for iomuxc register (http://patchwork.ozlabs.org/patch/368335/)
int board_eth_init(bd_t *bis)
{
- struct iomuxc_base_regs *iomuxc_regs =
-
On 18/07/2014 16:52, Markus Niebel wrote:
From: Markus Niebel markus.nie...@tq-group.com
This patch adds the changes to boards.cfg and the board directory
under board/tqc.
TQMa6 is a family of modules based on Freescale i.MX6. It consists of
TQMa6Q (i.MX6 Quad), TQMa6D (i.MX6 Dual)
Hi Jon,
On 21 July 2014 07:11, Jon Loeliger loeli...@gmail.com wrote:
And I think I am saying that we already *have* it generalized for
the GPIOs but only if we remove that renumbering function!
Consider again that the U_CLASS lookup of a GPIO simply matches
versus the range in each uclass
T1042RDB is a Freescale reference board that hosts the T1042 SoC
(and variants). The board is similar to T1040RDB, It is a reduced
personality of T1040 SoC without Integrated 8-port Gigabit(L2 Switch).
T1042RDB is configured with serdes protocol 0x86 which can support
following interfaces
- 2
We're bringing up a board that boots from SPI flash, so we had to re-work
fsl_espi.c for to get it to work at all and for speed.
Been working from 2009.11 because that's what came with a P1022DS box that
Freescale so generously provided. There has been a tremendous amount
divergence since
This patch adds support of rcw for T1042RDB, it does following:
- Add t1042_rcw.cfg file for serdes protocol 0x86 for T1042RDB
- Renames t1042_pi_rcw.cfg file from t1042_rcw.cfg and also updates
comments for valid serdes protocol
- Also updates CONFIG_SYS_FSL_PBL_RCW for T1042RDB
Signed-off-by:
This series tries to unify the Samsung board configs into a few header
files for exynos5 and exynos5.
The purpose is to make it easier to move to driver model. In that case
I would like things like the GPIO drivers and serial drivers to work in
a standard way, and not need to support device tree
Since exynos4 and exyno5 share many settings, we should move these into
a common file to avoid duplication.
Effective changes are:
- All exynos boards now have EXT4 and FAT write support - this affects
exynos5250 and exynos5420 which previously did not. This also disables
the ext2
We want exynos5250-dt.h to be a board which can support any exynos5250
device. This matches the naming used by Linux. As a first step, rename
the existing -dt files to -common to make it clear they are common files,
and not specific boards.
Signed-off-by: Simon Glass s...@chromium.org
---
Change this board to use the exynos common config and add a device tree.
Signed-off-by: Simon Glass s...@chromium.org
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/s5pc1xx-smdkc100.dts | 21 +++
include/configs/smdkc100.h| 57
Most of the smdkv310 features are common with other exynos4 boards. To
permit easier addition of driver model support, use the common file and
add a device tree file.
Signed-off-by: Simon Glass s...@chromium.org
---
arch/arm/dts/Makefile| 1 +
Most of the arndale features are common with other exynos5250 boards. To
permit easier addition of driver model support, use the common file.
Signed-off-by: Simon Glass s...@chromium.org
---
include/configs/arndale.h | 212 +++---
1 file changed, 14
These boards do not in fact have a Chrome OS EC, nor a TPS565090 PMIC, so
move the settings into a separate common file to be used by those that need
it.
Signed-off-by: Simon Glass s...@chromium.org
---
include/configs/exynos5-common.h| 18 +++---
Change this board to use the exynos common config and add a device tree.
This also adds a pinmux header file - but it is just a copy of the exynos
one so may be incorrect.
Signed-off-by: Simon Glass s...@chromium.org
---
arch/arm/dts/Makefile | 1 +
+Albert, Tom
Hi Albert,
On 11 July 2014 11:44, Jeroen Hofstee dasub...@myspectrum.nl wrote:
Hello Simon,
On 11-07-14 06:23, Simon Glass wrote:
At present arm defines CONFIG_SYS_GENERIC_GLOBAL_DATA, meaning that
the global_data pointer is set up in board_init_f(). However it is
actually
A few things are common but are not in the common file. Fix this and
rename the file to fit with the other exynos*-common files.
Signed-off-by: Simon Glass s...@chromium.org
---
include/configs/{exynos5420.h = exynos5420-common.h} | 11 ++-
include/configs/peach-pit.h
+Tom
Hi Albert,
On 10 July 2014 22:23, Simon Glass s...@chromium.org wrote:
Add support for re-relocation malloc() in arm's start-up code.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v3:
- Rebase on earlier patch
Can you please take a look at this patch? I would like to
This patch adds support of rcw for T1042RDB, it makes following changes :
- Adds t1042_rcw.cfg file for serdes protocol 0x86 for T1042RDB
- Renames t1042_pi_rcw.cfg file from t1042_rcw.cfg and also updates
comments for valid serdes protocol which is 0x06
- Also updates CONFIG_SYS_FSL_PBL_RCW for
Hi,
On 14 July 2014 18:16, Simon Glass s...@chromium.org wrote:
Hi Tom,
On 14 July 2014 16:28, Tom Rini tr...@ti.com wrote:
On Thu, Jul 10, 2014 at 10:23:24PM -0600, Simon Glass wrote:
There has been talk on and off of a pre-relocation malloc() implementation.
Driver model needs this so
On Tue, Jul 22, 2014 at 2:08 PM, Daniel Drake dr...@endlessm.com wrote:
While looking at the old uboot from hardkernel, I'm curious about
CONFIG_CLK_BUS_DMC_220_440, which is set by default. This appears to
run the memory at a high speed, by writing certain registers in the
Dynamic Memory
This Patch updates error print for QE which should be easily understood
Signed-off-by: Vijay Rai vijay@freescale.com
---
drivers/qe/qe.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index 9c5fbd1..df468d4 100644
---
This series includes a number of base driver model enhancements, mostly
targeted at pre-relocation and to enable buses to be easily implemented.
With the device tree, child nodes for buses can now be scanned to create
child devices, and bus-related information about each child can be
stored.
Add a debug message for when a device tree node has no driver. Also reword
the warning when a device fails to bind, which was misleading.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v3: None
Changes in v2: None
drivers/core/lists.c | 16 +---
1 file changed, 13
Several functions will use this same pattern, so bring it into a function.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v3: None
Changes in v2: None
drivers/core/uclass.c | 28 ++--
1 file changed, 22 insertions(+), 6 deletions(-)
diff --git
The root device should be probed just like any other device. The effect of
this is to mark the device as activated, so that it can be removed (along
with its children) if required.
Signed-off-by: Simon Glass s...@chromium.org
Acked-by: Marek Vasut ma...@denx.de
---
Changes in v3: None
Changes in
Add a new method which removes and unbinds all drivers.
Signed-off-by: Simon Glass s...@chromium.org
Acked-by: Marek Vasut ma...@denx.de
---
Changes in v3: None
Changes in v2: None
drivers/core/root.c | 8
include/dm/root.h | 8
2 files changed, 16 insertions(+)
diff --git
The current functions for adding and removing devices require a device name.
This is not convenient for driver model, which wants to store a pointer to
the relevant device. Add new functions which provide this feature and adjust
the old ones to call these.
Signed-off-by: Simon Glass
Drivers are supposed to be able to close down cleanly. To set a good example,
make sandbox shut down its driver model drivers and remove them before exit.
It may be desirable to do the same more generally once driver model is more
widely-used. This could be done during bootm, before U-Boot jumps
For sandbox we have a fallback console which is used very early in
U-Boot, before serial drivers are available. Rather than try to guess
when to switch to the real console, add a flag so we can be sure. This
makes sure that sandbox can always output a panic() message, for example,
and avoids
Initialise devices marked 'pre-reloc' and make them available prior to
relocation. Note that this requires pre-reloc malloc() to be available.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v3: None
Changes in v2:
- Minor reword to comment for dm_init_and_scan()
common/board_f.c
Driver model does not support SPL yet, so we should not use the GPIO
uclass for SPL.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v3: None
Changes in v2: None
drivers/gpio/Makefile | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpio/Makefile
Rather than reusing the 'reg' property, use an explicit property for the
expected ping value used in testing.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v3: None
Changes in v2: None
test/dm/test-fdt.c | 13 -
test/dm/test.dts | 5 -
2 files changed, 12
Some boards will have devices which are not in the device tree and do not
have platform data. They may be programnatically created, for example.
Add a hook which boards can use to bind those devices early in boot.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v3: None
Changes in
Driver model currently only operates after relocation is complete. In this
state U-Boot typically has a small amount of memory available. In adding
support for driver model prior to relocation we must try to use as little
memory as possible.
In addition, on some machines the memory has not be
At present stdio device functions do not get any clue as to which stdio
device is being acted on. Some implementations go to great lengths to work
around this, such as defining a whole separate set of functions for each
possible device.
For driver model we need to associate a stdio_dev with a
In U-Boot it is pretty common to number devices from 0 and access them
on the command line using this numbering. While it may come to pass that
we will move away from this numbering, the possibility seems remote at
present.
Given that devices within a uclass will have an implied numbering, it
This simple function returns the node offset of a named alias.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v3: None
Changes in v2: None
include/fdtdec.h | 11 +++
lib/fdtdec.c | 15 +++
2 files changed, 26 insertions(+)
diff --git a/include/fdtdec.h
Fix up the style of a few comments and add/clarify a few others.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v3: None
Changes in v2: None
include/dm/device.h| 2 +-
include/dm/platdata.h | 10 --
include/dm/root.h | 3 ++-
include/dm/uclass-id.h | 2 +-
Add this information to 'dm tree' and 'dm uclass' commands.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v3: None
Changes in v2: None
test/dm/cmd_dm.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/test/dm/cmd_dm.c b/test/dm/cmd_dm.c
index 93e5255..26980d2 100644
---
Aliases are used to provide U-Boot's numbering of devices, such as:
aliases {
spi0 = /spi@1233;
}
spi@1233 {
...
}
This tells us that the SPI controller at 1233 is considered to be the
first SPI controller (SPI 0). So we have a numbering for the SPI node.
Add a
Don't allow access to uclasses before they have been initialised.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v3: None
Changes in v2: None
doc/driver-model/README.txt | 3 ++-
drivers/core/uclass.c | 2 ++
test/dm/core.c | 14 ++
3 files
Uclasses should be named, so add a name for the demo uclass.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v3: None
Changes in v2:
- Expand series to include all driver-model-required changes
drivers/demo/demo-uclass.c | 1 +
1 file changed, 1 insertion(+)
diff --git
Some devices (particularly bus devices) must track their children, knowing
when a new child is added so that it can be set up for communication on the
bus.
Add a child_pre_probe() method to provide this feature, and a corresponding
child_post_remove() method.
Signed-off-by: Simon Glass
The device display for 'dm tree' and 'dm uclass' is mostly the same, so
move it into a common function.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v3: None
Changes in v2: None
test/dm/cmd_dm.c | 27 +++
1 file changed, 19 insertions(+), 8 deletions(-)
Devices can have childen that can be addressed by a simple index, the
sequence number or a device tree offset. Add functions to access a child
in each of these ways.
The index is typically used as a fallback when the sequence number is not
available. For example we may use a serial UART with
If the console is not present, we try to reduce overhead by stopping any
output in vprintf(), before it gets to putc(). This is of dubious merit
in general, but in the case of sandbox it is incorrect since we have a
fallback console which reports errors very early in U-Boot. If this is
defeated
This command currently activates devices as it lists them. This is not
desirable since it changes the system state. Fix it and avoid printing
a newline if there are no devices in a uclass.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v3: None
Changes in v2: None
test/dm/cmd_dm.c
Some device types can have child devices and want to store information
about them. For example a USB flash stick attached to a USB host
controller would likely use this space. The controller can hold
information about the USB state of each of its children.
The data is stored attached to the child
There is no point in setting a structure's memory to NULL when it has
already been zeroed with memset().
Also, there is no need to create a stub function for stdio to call - if the
function is NULL it will not be called.
This is a clean-up, with no change in functionality.
Signed-off-by: Simon
At present only root nodes in the device tree are scanned for devices.
But some devices can have children. For example a SPI bus may have
several children for each of its chip selects.
Add a function which scans subnodes and binds devices for each one. This
can be used for the root node scan
Each device that was bound from a device tree has an node that caused it to
be bound. Add functions that find and return a device based on a device tree
offset.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v3: None
Changes in v2: None
doc/driver-model/README.txt | 3 ++-
On Wed, Jul 23, 2014 at 07:59:17AM +0100, Ian Campbell wrote:
On Tue, 2014-07-22 at 18:01 -0400, Tom Rini wrote:
On Fri, Jul 18, 2014 at 08:38:41PM +0100, Ian Campbell wrote:
This enables the necessary clocks, in AHB0 and in PLL6_CFG. This is done
for sun7i only since I don't have
On Wed, 2014-07-23 at 09:04 -0400, Tom Rini wrote:
On Wed, Jul 23, 2014 at 07:59:17AM +0100, Ian Campbell wrote:
On Tue, 2014-07-22 at 18:01 -0400, Tom Rini wrote:
On Fri, Jul 18, 2014 at 08:38:41PM +0100, Ian Campbell wrote:
This enables the necessary clocks, in AHB0 and in
On Wed, Jul 23, 2014 at 06:16:52AM -0600, Simon Glass wrote:
+Albert, Tom
Hi Albert,
On 11 July 2014 11:44, Jeroen Hofstee dasub...@myspectrum.nl wrote:
Hello Simon,
On 11-07-14 06:23, Simon Glass wrote:
At present arm defines CONFIG_SYS_GENERIC_GLOBAL_DATA, meaning that
the
On 07/23/2014 05:35 AM, Masahiro Yamada wrote:
Hi Michal,
On Thu, 15 May 2014 09:46:02 +0200
Michal Simek michal.si...@xilinx.com wrote:
Without this patch is DRAM size one line below DRAM:
which is not nice
Origin:
I2C: ready
DRAM: ECC disabled
1 GiB
Now running in RAM - U-Boot
On Wed, Jul 23, 2014 at 06:24:08AM -0600, Simon Glass wrote:
Hi,
On 14 July 2014 18:16, Simon Glass s...@chromium.org wrote:
Hi Tom,
On 14 July 2014 16:28, Tom Rini tr...@ti.com wrote:
On Thu, Jul 10, 2014 at 10:23:24PM -0600, Simon Glass wrote:
There has been talk on and off of
Hi Albert,
please pull these three patches to your tree.
2 of them are for moving to generic board and the last
one is about suppressing warning from out of tree files.
Thanks,
Michal
[u-boot]$ ./tools/buildman/buildman -b zynq zynq -sSed
Summary of 4 commits for 6 boards (6 threads, 2 jobs per
Hi Masahiro,
On 07/23/2014 05:40 AM, Masahiro Yamada wrote:
Hi Michal,
Could you apply this one along with your other zynq patches ?
And please clean-up noise on patchwork.
http://patchwork.ozlabs.org/patch/347047/
http://patchwork.ozlabs.org/patch/355816/
I have clean status on
Hi Daniel,
On 07/23/2014 02:27 PM, Daniel Drake wrote:
On Tue, Jul 22, 2014 at 2:08 PM, Daniel Drake dr...@endlessm.com wrote:
While looking at the old uboot from hardkernel, I'm curious about
CONFIG_CLK_BUS_DMC_220_440, which is set by default. This appears to
run the memory at a high speed,
Benoit,
If your interest is in initializing DDR for ECC, you don't have use
dma_meminit(). There is a better and faster way to do so. All Freescale modern
DDR controllers support this feature. All you have to do is to define these
macros
CONFIG_DDR_ECC
CONFIG_ECC_INIT_VIA_DDRCONTROLLER
Hi,
I am trying to download the file from dfu-utilities(version 0.7) and using
the ci_udc at device side. After all the data was sent from the host, the
dfu utilities sent the zpl packet but at the device side the dfu_write is
not getting invoked for zero packet length and hence causing the data
On Fri, 30 May 2014 10:19:16 +0100
Ian Campbell i...@hellion.org.uk wrote:
On Fri, 2014-05-30 at 11:06 +0200, Hans de Goede wrote:
We should not be aligning the amount of bytes which we try to read from the
disk, this leads to trying to read more bytes then there are which fails.
On Mon, 9 Jun 2014 11:36:55 +0200
Hans de Goede hdego...@redhat.com wrote:
The DMA code in sunxi_mmc.c is broken. mmc_trans_data_by_dma() allocates the
dma descriptors on the stack, and then exits while the dma transfer is in
progress, so the dma engine is reading stack memory which at that
On Wed, 2014-07-23 at 20:29 +0300, Siarhei Siamashka wrote:
On Fri, 30 May 2014 10:19:16 +0100
Ian Campbell i...@hellion.org.uk wrote:
On Fri, 2014-05-30 at 11:06 +0200, Hans de Goede wrote:
We should not be aligning the amount of bytes which we try to read from
the
disk, this
On Mon, 9 Jun 2014 11:36:56 +0200
Hans de Goede hdego...@redhat.com wrote:
There is no way to reset the cpu, so use the watchdog for this.
Signed-off-by: Hans de Goede hdego...@redhat.com
Acked-by: Ian Campbell i...@hellion.org.uk
Acked-by: Siarhei Siamashka siarhei.siamas...@gmail.com
On Mon, 9 Jun 2014 11:36:57 +0200
Hans de Goede hdego...@redhat.com wrote:
Add support for the Allwinner A10 SoC also known as the Allwinner sun4i
family,
and add the Cubieboard board which uses the A10 SoC.
Compared to sun7 only the DRAM controller is a bit different:
-Controller reset
On Mon, 9 Jun 2014 11:36:58 +0200
Hans de Goede hdego...@redhat.com wrote:
Add support for the Allwinner A13 and A10s SoCs also know as the Allwinner
sun5i family, and the A13-OLinuXinoM A13 based and r7-tv-dongle A10s based
boards.
The only differences compared to the already supported
On Wed, Jul 23, 2014 at 04:27:36AM -0600, Simon Glass wrote:
On 22 July 2014 18:08, Chris Packham judge.pack...@gmail.com wrote:
file_size was being calculated using back-ticks but map_size uses
$(shell ...). Update the file_size calculation to use $(shell ...).
Signed-off-by: Chris
On Mon, 9 Jun 2014 11:36:59 +0200
Hans de Goede hdego...@redhat.com wrote:
From: Stefan Roese s...@denx.de
There have been 3 versions of the sunxi_emac support patch during its
development. Somehow version 2 ended up in upstream u-boot where as
the u-boot-sunxi git repo got version 3.
On Wednesday, July 16, 2014 at 09:18:56 AM, Lukasz Majewski wrote:
Dear Marek,
The following changes since commit
5ba95541b700d2edecb4d97d4b905f51ed8551b3:
usb: phy: omap_usb_phy: implement usb_phy_power() for AM437x
(2014-07-09 22:11:51 +0200)
are available in the git repository
On Mon, 9 Jun 2014 11:37:00 +0200
Hans de Goede hdego...@redhat.com wrote:
Signed-off-by: Hans de Goede hdego...@redhat.com
Acked-by: Ian Campbell i...@hellion.org.uk
---
arch/arm/cpu/armv7/sunxi/board.c | 8
boards.cfg | 2 +-
include/configs/sunxi-common.h
On Mon, 9 Jun 2014 11:37:01 +0200
Hans de Goede hdego...@redhat.com wrote:
From: Chen-Yu Tsai w...@csie.org
Many A20 boards (ie Cubieboard2, A20-OLinuXino_MICRO) use an 100 Mbit MII
phy together with the GMAC nic found in the A20 SoC, add support for this
(this will get used when we add
On Wed, 2014-07-23 at 18:40 +0100, Ian Campbell wrote:
On Wed, 2014-07-23 at 20:29 +0300, Siarhei Siamashka wrote:
On Fri, 30 May 2014 10:19:16 +0100
Ian Campbell i...@hellion.org.uk wrote:
On Fri, 2014-05-30 at 11:06 +0200, Hans de Goede wrote:
We should not be aligning the amount
On Fri, 13 Jun 2014 22:55:50 +0200
Hans de Goede hdego...@redhat.com wrote:
From: Henrik Nordstrom hen...@henriknordstrom.net
Add support for the x-powers axp209 pmic which is found on most A10, A13 and
A20 boards.
And enable AXP209 support for the Cubietruck and Cubieboard boards.
On Fri, 13 Jun 2014 22:55:52 +0200
Hans de Goede hdego...@redhat.com wrote:
Do the same as the Linux kernel does, this fixes the SoC hanging on reset
about 50% of the time.
Signed-off-by: Hans de Goede hdego...@redhat.com
Acked-by: Ian Campbell i...@hellion.org.uk
---
On Sat, 14 Jun 2014 10:46:37 +0100
Ian Campbell i...@hellion.org.uk wrote:
On Sat, 2014-06-14 at 08:59 +0200, Hans de Goede wrote:
From: Jonathan Liu net...@gmail.com
Similar to the USB NIC found on OMAP5uEVM, PandaBoard and BeagleBoard-XM
boards, the sunxi SoCs have a NIC onboard
Hi,
On 23-07-14 20:03, Tom Rini wrote:
On Wed, Jul 23, 2014 at 04:27:36AM -0600, Simon Glass wrote:
On 22 July 2014 18:08, Chris Packham judge.pack...@gmail.com wrote:
file_size was being calculated using back-ticks but map_size uses
$(shell ...). Update the file_size calculation to use
first issue replace stat -c %s with wc:
The binary_size_check target relies on stat -c %s to return the size
of u-boot.bin. This only works with GNU stat though. Use wc instead.
Second issue as reported by chris Packham:
file_size was being calculated using back-ticks but map_size uses
$(shell
On Wed, Jul 23, 2014 at 09:24:00PM +0200, Jeroen Hofstee wrote:
Hi,
On 23-07-14 20:03, Tom Rini wrote:
On Wed, Jul 23, 2014 at 04:27:36AM -0600, Simon Glass wrote:
On 22 July 2014 18:08, Chris Packham judge.pack...@gmail.com wrote:
file_size was being calculated using back-ticks but
Tom,
The following changes since commit fbe79a17fddb7f0b11aa15b9c93e9a4a26165ed8:
m68k: define __kernel_size_t as unsinged int again (2014-07-22 09:46:50 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx.git master
for you to fetch changes up to
Dear S Durga Prasad Paladugu,
In message
CAAhU36hRQ_AgOR6bodRz-8pcLb2hkVW-ztrKVX48yFkcEWS=h...@mail.gmail.com you
wrote:
I am trying to download the file from dfu-utilities(version 0.7) and using
the ci_udc at device side. After all the data was sent from the host, the
...
What is your
Rainer,
Did you get a chance to fix your patch?
York
On 07/18/2014 03:21 PM, York Sun wrote:
Rainer,
Once this patch is enabled, we have
warning: implicit declaration of function 'init_85xx_watchdog'
[-Wimplicit-function-declaration]
Please fix.
York
On 06/03/2014 12:05 AM,
On Tue, Jul 22, 2014 at 7:06 PM, Stephen Warren swar...@wwwdotorg.org
wrote:
From: Stephen Warren swar...@nvidia.com
When pxe boot downloads the initrd/kernel/DTB, netboot_common() saves
the downloaded filename to global variable BootFile. If the boot
operation is aborted, this global state
1 - 100 of 127 matches
Mail list logo
