Set the CONFIG_ENV_OFFSET from 384KB to 512KB offset, so we will have larger
space
for u-boot image.
When enabling NAND flash support feature, the u-boot image size has exceeded the
384KB, which causes overlay to the environment variables storage.
Signed-off-by: Ye.Li b37...@freescale.com
---
The i.MX6Q/DL sabreauto board has one NAND socket, set the
CONFIG_NAND_MXS and relevant NAND configurations to enable the
MXS NAND flash driver.
Add board level codes to set IOMUX and clock for GPMI-NAND and
BCH module.
Signed-off-by: Ye.Li b37...@freescale.com
---
Hi Nikita,
Thanks for cleaning up!
On Fri, 7 Nov 2014 14:17:18 +0200
Nikita Kiryanov nik...@compulab.co.il wrote:
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index bd4dd3c..bfaabeb 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -15,6 +15,8 @@ Board
On Fri 2014-11-07 18:26:05, Stefan Roese wrote:
Hi Simon,
On 07.11.2014 18:21, Simon Glass wrote:
+ qspi: spi@ff705000 {
+ compatible = cadence,qspi;
+ #address-cells = 1;
+ #size-cells = 0;
+
Add support for Cortina CS4315/CS4340 10G PHY.
- This driver loads CS43xx firmware from NOR/NAND/SPI/SD device
to initialize Cortina PHY.
- Cortina PHY has non-standard offset of PHY ID registers, thus
we define own get_phy_id() to override default get_phy_id().
- To define macro
-Original Message-
From: Shengzhou Liu [mailto:shengzhou@freescale.com]
Sent: Monday, November 10, 2014 6:32 PM
To: u-boot@lists.denx.de; Sun York-R58495; joe.hershber...@gmail.com
Cc: Liu Shengzhou-B36685
Subject: [PATCH v7] net/phy: Add support for CS4315/CS4340 PHY
The link
On Mon, Nov 10, 2014 at 6:29 AM, Ye.Li b37...@freescale.com wrote:
+#ifdef CONFIG_NAND_MXS
+iomux_v3_cfg_t gpmi_pads[] = {
This can be made 'static'.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Upon further investigation, it seems like the board DOES receive the 0x01
START_CHAR. An RS232 sniffer shows that the 0x01 is being sent, and the
board answers 'S'. It does not show on the console though.
I will need to go deeper into the code to see why it fails. Both CKermit and
TeraTerm makes
Dear bomellberg,
In message 1415622808801-195379.p...@n7.nabble.com you wrote:
Upon further investigation, it seems like the board DOES receive the 0x01
START_CHAR. An RS232 sniffer shows that the 0x01 is being sent, and the
board answers 'S'. It does not show on the console though.
I will
Dear Wolfgang,
Which sort of hardware are you using?
I am using an NXP LPC4337 cpu with external SDRAM and SPIFI flash. No
ethernet.
My config files are based upon code for the Embedded Artists LPC4357 demo
board (ea-lpc4357.h) See my first post.
Thanks,
/Bo
--
View this message in
From: Oliver Schinagl oli...@schinagl.nl
The A31 uses the AXP221 pmic for various voltages.
Signed-off-by: Oliver Schinagl oli...@schinagl.nl
Signed-off-by: Hans de Goede hdego...@redhat.com
--
Changes in v2:
-Rebase
Changes in v3:
-Add support for all dldo and aldo-s
-Add Kconfig option to
On 10/11/14 12:51, Jan Kiszka wrote:
Hi Marc,
what is the motivation to expose a PSCI 0.1 interface in U-boot, instead
of 0.2? Support for preexisting users of 0.1? The kernel seems to be
happy with both, and I'm now wondering if we should actually add the
legacy version to Jailhouse as
On 10/11/14 12:57, Jan Kiszka wrote:
Hi all,
I'm trying to get Marc's CPU hotplug-anabling patch [1] for sunxi
working on a B-Pi. After the first discussion it became clear that we
need something like flush_dcache_all in the PSCI monitor (I don't think
we need an icache flush, do we?). Does
On Mon, 2014-11-10 at 14:11 +0100, Hans de Goede wrote:
From: Oliver Schinagl oli...@schinagl.nl
The A31 uses the AXP221 pmic for various voltages.
Signed-off-by: Oliver Schinagl oli...@schinagl.nl
Signed-off-by: Hans de Goede hdego...@redhat.com
Acked-by: Ian Campbell
Hi Marc,
what is the motivation to expose a PSCI 0.1 interface in U-boot, instead
of 0.2? Support for preexisting users of 0.1? The kernel seems to be
happy with both, and I'm now wondering if we should actually add the
legacy version to Jailhouse as well (I hope we can avoid this).
Still
Hi all,
I'm trying to get Marc's CPU hotplug-anabling patch [1] for sunxi
working on a B-Pi. After the first discussion it became clear that we
need something like flush_dcache_all in the PSCI monitor (I don't think
we need an icache flush, do we?). Does anyone have a clever suggestion
how to
On 2014-11-10 14:08, Marc Zyngier wrote:
On 10/11/14 12:51, Jan Kiszka wrote:
Hi Marc,
what is the motivation to expose a PSCI 0.1 interface in U-boot, instead
of 0.2? Support for preexisting users of 0.1? The kernel seems to be
happy with both, and I'm now wondering if we should actually
Hi,
On 11/10/2014 02:20 PM, Ian Campbell wrote:
On Mon, 2014-11-10 at 14:11 +0100, Hans de Goede wrote:
From: Oliver Schinagl oli...@schinagl.nl
The A31 uses the AXP221 pmic for various voltages.
Signed-off-by: Oliver Schinagl oli...@schinagl.nl
Signed-off-by: Hans de Goede
Signed-off-by: Christian Gmeiner christian.gmei...@gmail.com
---
board/bachmann/ot1200/ot1200.c | 7 ---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/board/bachmann/ot1200/ot1200.c b/board/bachmann/ot1200/ot1200.c
index 45d761f..2ed8cf7 100644
---
On 2014-11-10 14:29, bhupesh.sha...@freescale.com wrote:
Hi,
-Original Message-
From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de]
On Behalf Of Jan Kiszka
Sent: Monday, November 10, 2014 6:56 PM
To: Marc Zyngier
Cc: u-boot@lists.denx.de
Subject: Re:
U-Boot 2014.10-17457-g0b23780-dirty (Nov 10 2014 - 11:41:04)
CPU: Freescale i.MX6D rev1.2 at 792 MHz
Reset cause: WDOG
Board: ot1200
I2C: ready
DRAM: 1 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
SF: Detected M25P16 with page size 256 Bytes, erase size 64 KiB, total 2 MiB
In:serial
Out: serial
ignore...
--
Christian Gmeiner, MSc
https://soundcloud.com/christian-gmeiner
2014-11-10 14:34 GMT+01:00 Christian Gmeiner christian.gmei...@gmail.com:
Signed-off-by: Christian Gmeiner christian.gmei...@gmail.com
---
board/bachmann/ot1200/ot1200.c | 7 ---
1 file changed, 4
On 10/11/14 13:25, Jan Kiszka wrote:
On 2014-11-10 14:08, Marc Zyngier wrote:
On 10/11/14 12:51, Jan Kiszka wrote:
Hi Marc,
what is the motivation to expose a PSCI 0.1 interface in U-boot, instead
of 0.2? Support for preexisting users of 0.1? The kernel seems to be
happy with both, and I'm
Hi,
-Original Message-
From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de]
On Behalf Of Jan Kiszka
Sent: Monday, November 10, 2014 6:56 PM
To: Marc Zyngier
Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] ARM: PSCI 0.1 vs 0.2
On 2014-11-10 14:08, Marc Zyngier
On Mon, 2014-11-10 at 14:33 +0100, Hans de Goede wrote:
Hi,
On 11/10/2014 02:20 PM, Ian Campbell wrote:
On Mon, 2014-11-10 at 14:11 +0100, Hans de Goede wrote:
From: Oliver Schinagl oli...@schinagl.nl
The A31 uses the AXP221 pmic for various voltages.
Signed-off-by: Oliver Schinagl
On Mon, Nov 10, 2014 at 6:29 AM, Ye.Li b37...@freescale.com wrote:
Set the CONFIG_ENV_OFFSET from 384KB to 512KB offset, so we will have larger
space
for u-boot image.
When enabling NAND flash support feature, the u-boot image size has exceeded
the
384KB, which causes overlay to the
Hi,
On 11/10/2014 03:13 PM, Ian Campbell wrote:
On Mon, 2014-11-10 at 14:33 +0100, Hans de Goede wrote:
Hi,
On 11/10/2014 02:20 PM, Ian Campbell wrote:
On Mon, 2014-11-10 at 14:11 +0100, Hans de Goede wrote:
From: Oliver Schinagl oli...@schinagl.nl
The A31 uses the AXP221 pmic for various
Hi again. I just have a few things left to complete the port and hoping
someone can help me out.
1. How come setenv is not working in the board file? I tried setenv in
different locations of board_early_init_f(), board_init(), board_late_init()
and checkboard(), but it's not working. Did
On Mon, Nov 10, 2014 at 1:14 PM, DaveKucharczyk
david.kucharc...@gmail.com wrote:
Hi again. I just have a few things left to complete the port and hoping
someone can help me out.
1. How come setenv is not working in the board file? I tried setenv in
different locations of
On 9 November 2014 03:44, Ian Campbell i...@hellion.org.uk wrote:
From: Ian Campbell ian.campb...@citrix.com
I was running into this limit with a not overly long PXE append line.
Since the PXE code wants to print the resulting command line increase
CONFIG_SYS_PBSIZE too.
Signed-off-by: Ian
Dear Fabio Estevam,
In message CAOMZO5AiJtDt_CZrO6gzU=jipp_2-etpigfck7zhfhnnzxp...@mail.gmail.com
you wrote:
1. How come setenv is not working in the board file? I tried setenv in
different locations of board_early_init_f(), board_init(), board_late_init()
and checkboard(), but it's not
On Sun, Nov 9, 2014 at 8:44 AM, Ian Campbell i...@hellion.org.uk wrote:
/* Miscellaneous configurable options */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
+#define CONFIG_SYS_CBSIZE
+CC: Graham Moore
On 11/10/2014 04:47 AM, Pavel Machek wrote:
On Fri 2014-11-07 18:26:05, Stefan Roese wrote:
Hi Simon,
On 07.11.2014 18:21, Simon Glass wrote:
+ qspi: spi@ff705000 {
+ compatible = cadence,qspi;
+ #address-cells =
Hi,
On 9 November 2014 17:13, Srinivasan S srinivasa...@tataelxsi.co.in wrote:
Hi Simon,
Hi Simon,
As you suggested earlier am using u-boot-2014.07 Am using
~/ti-sdk-am335x-evm-07.00.00.00/bin/create-sdcard.sh for creating the
partitions,
After creating the partitions I tried
On Mon, Nov 10, 2014 at 1:47 PM, Wolfgang Denk w...@denx.de wrote:
Dear Fabio Estevam,
In message
CAOMZO5AiJtDt_CZrO6gzU=jipp_2-etpigfck7zhfhnnzxp...@mail.gmail.com you
wrote:
1. How come setenv is not working in the board file? I tried setenv in
different locations of
Adjust the text to mention that rev C of the board is also supported.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
board/freescale/mx28evk/README | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/freescale/mx28evk/README b/board/freescale/mx28evk/README
Tested on a Vayu EVM Rev.E2 with DRA752 ES1.1
Signed-off-by: Lubomir Popov l-po...@ti.com
---
include/configs/dra7xx_evm.h |1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 2eaabde..174a711 100644
---
Hi Masahiro,
On 11/10/2014 10:33 AM, Masahiro Yamada wrote:
Hi Nikita,
Thanks for cleaning up!
On Fri, 7 Nov 2014 14:17:18 +0200
Nikita Kiryanov nik...@compulab.co.il wrote:
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index bd4dd3c..bfaabeb 100644
--- a/doc/README.scrapyard
The comments on the QSPI pad assignments erronously swapped
the qspi1_d0 and qspi1_d1 functionality and could cause
confusion. QSPI1_D[0] is in fact muxed on pad U1 (gpmc_a16),
and QSPI1_D[1] - on pad P3 (gpmc_a17). Fixing comments.
Signed-off-by: Lubomir Popov l-po...@ti.com
---
Hi gents,
On 11/10/2014 06:04 PM, Fabio Estevam wrote:
On Mon, Nov 10, 2014 at 1:47 PM, Wolfgang Denk w...@denx.de wrote:
Dear Fabio Estevam,
In message CAOMZO5AiJtDt_CZrO6gzU=jipp_2-etpigfck7zhfhnnzxp...@mail.gmail.com
you wrote:
1. How come setenv is not working in the board file? I
Not all portals might be managed and therefore visible.
Set the isdr register so that the corresponding isr register
won't be set. This is needed for deepsleep.
Signed-off-by: Jeffrey Ladouceur jeffrey.ladouc...@freescale.com
---
The following dependent patches should be applied first:
Hello Nikita,
2014-11-11 1:24 GMT+09:00 Nikita Kiryanov nik...@compulab.co.il:
I think we are supposed to fill blank fields that have been added by
former commits
(in this case, Commit/Removed fields of TOP*)
git log on the scrapyard file shows me that the commit IDs were always
filled
On Mon, Nov 10, 2014 at 06:34:10PM +0200, Lubomir Popov wrote:
The comments on the QSPI pad assignments erronously swapped
the qspi1_d0 and qspi1_d1 functionality and could cause
confusion. QSPI1_D[0] is in fact muxed on pad U1 (gpmc_a16),
and QSPI1_D[1] - on pad P3 (gpmc_a17). Fixing
On Sat, Nov 08, 2014 at 11:19:23PM +0100, Albert ARIBAUD wrote:
Hello Paul,
On Sat, 8 Nov 2014 23:14:54 +0100, Paul Kocialkowski
cont...@paulk.fr wrote:
This is a first attempt at adding support for U-Boot image load from raw
partitions. It does not support OS boot as I cannot test it on
On Sat, Nov 08, 2014 at 11:14:55PM +0100, Paul Kocialkowski wrote:
CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION ought to be called
CONFIG_SYS_MMCSD_FS_BOOT_PARTITION to keep it consistent with other config
options such as: CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR.
In addition, it is not related to
On Mon, Nov 10, 2014 at 06:14:18PM +0200, Lubomir Popov wrote:
Tested on a Vayu EVM Rev.E2 with DRA752 ES1.1
Signed-off-by: Lubomir Popov l-po...@ti.com
Reviewed-by: Tom Rini tr...@ti.com
--
Tom
signature.asc
Description: Digital signature
___
On Sat, Nov 08, 2014 at 11:14:56PM +0100, Paul Kocialkowski wrote:
Raw images of U-Boot can be stored inside MMC partitions, so it makes sense to
read the partition table, looking for a partition number instead of using
a fixed sector address.
Signed-off-by: Paul Kocialkowski
On Sat, Nov 08, 2014 at 08:55:46PM +0100, Paul Kocialkowski wrote:
Not every device has multiple MMC slots available, so it makes sense to enable
only the required LDOs for the available slots. Generic code in omap_hsmmc
will
enable both VMMC1 and VMMC2, in doubt.
Signed-off-by: Paul
On Sat, Nov 08, 2014 at 08:55:47PM +0100, Paul Kocialkowski wrote:
Boards using the TWL4030 regulator may not all use the LDOs the same way
(e.g. MMC2 power can be controlled by another LDO than VMMC2).
This delegates TWL4030 MMC power initializations to board-specific functions,
that may
On Sat, Nov 08, 2014 at 10:29:24PM +0100, Paul Kocialkowski wrote:
Le samedi 08 novembre 2014 à 20:55 +0100, Paul Kocialkowski a écrit :
Boards using the TWL4030 regulator may not all use the LDOs the same way
(e.g. MMC2 power can be controlled by another LDO than VMMC2).
This delegates
On Sat, Nov 08, 2014 at 08:55:45PM +0100, Paul Kocialkowski wrote:
Some devices may use non-standard combinations of regulators to power MMC:
this allows these devices to provide a board-specific MMC power init function
to set everything up in their own way.
Signed-off-by: Paul Kocialkowski
On Thu, Nov 06, 2014 at 08:28:43AM -0600, Felipe Balbi wrote:
Those regulators don't have any coupling with
what they supply, so remove the suffixes in order
to not confuse anybody.
Signed-off-by: Felipe Balbi ba...@ti.com
Reviewed-by: Tom Rini tr...@ti.com
--
Tom
signature.asc
On Thu, Nov 06, 2014 at 08:28:42AM -0600, Felipe Balbi wrote:
Out of all OMAP5-like boards, only one of them
needs CONFIG_MISC_INIT_R, so it's best to enable
that for that particular board only, instead of
enabling for all boards unconditionally.
Signed-off-by: Felipe Balbi ba...@ti.com
On Sat, Nov 08, 2014 at 09:25:06AM +0100, Albert ARIBAUD wrote:
Hello Steve,
On Fri, 7 Nov 2014 18:13:18 -0800, Steve Rae s...@broadcom.com wrote:
- 5 based on cygnus, 2 based on 28155
- updates to support board families better
- add functions so CONFIG_ARMV7_NONSEC can be enabled on
On Thu, Nov 06, 2014 at 08:28:44AM -0600, Felipe Balbi wrote:
some boards might want to use USB1 for host,
without fiddling those registers it'll be
impossible.
Signed-off-by: Felipe Balbi ba...@ti.com
Reviewed-by: Tom Rini tr...@ti.com
--
Tom
signature.asc
Description: Digital
On Thu, Nov 06, 2014 at 08:28:45AM -0600, Felipe Balbi wrote:
there's no such function usb3_phy_power(),
it's likely that author meant to call,
usb_phy_power() instead, but that's already
called properly from xhci-omap.c.
Signed-off-by: Felipe Balbi ba...@ti.com
Reviewed-by: Tom Rini
On Thu, Nov 06, 2014 at 08:28:46AM -0600, Felipe Balbi wrote:
If we want to have two sections, one on each EMIF, without
interleaving, current code wouldn't enable emif2. Fix that
problem.
Signed-off-by: Felipe Balbi ba...@ti.com
Reviewed-by: Tom Rini tr...@ti.com
--
Tom
signature.asc
On Thu, Nov 06, 2014 at 08:28:48AM -0600, Felipe Balbi wrote:
this way we can let boards overwrite based
on what they need.
Signed-off-by: Felipe Balbi ba...@ti.com
Reviewed-by: Tom Rini tr...@ti.com
--
Tom
signature.asc
Description: Digital signature
On Thu, Nov 06, 2014 at 08:28:51AM -0600, Felipe Balbi wrote:
just add a few ifdefs around because this
device is very similar to dra7xxx.
Signed-off-by: Felipe Balbi ba...@ti.com
Reviewed-by: Tom Rini tr...@ti.com
--
Tom
signature.asc
Description: Digital signature
On Thu, Nov 06, 2014 at 08:28:47AM -0600, Felipe Balbi wrote:
From: Franklin S Cooper Jr fcoo...@ti.com
* Since the emmc isn't always programed trying to load the fs from the
emmc causes boot failures/kernel panic.
* The current bootcmd is set to:
bootcmd=run findfdt; run
On Thu, Nov 06, 2014 at 08:28:50AM -0600, Felipe Balbi wrote:
expose those two definitions so they can be
used by another board which we're adding in upcoming
patches.
Signed-off-by: Felipe Balbi ba...@ti.com
Reviewed-by: Tom Rini tr...@ti.com
--
Tom
signature.asc
Description: Digital
On Thu, Nov 06, 2014 at 08:28:49AM -0600, Felipe Balbi wrote:
this will allow for boards to overwrite those
in case memory setup is different.
Signed-off-by: Felipe Balbi ba...@ti.com
Reviewed-by: Tom Rini tr...@ti.com
--
Tom
signature.asc
Description: Digital signature
On Thu, Nov 06, 2014 at 08:44:27AM -0600, Felipe Balbi wrote:
BeagleBoard-X15 is the next generation Open Source
Hardware BeagleBoard based on TI's AM5728 SoC
featuring dual core 1.5GHZ A15 processor. The
platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated
Hi Bin,
On 9 November 2014 07:18, Bin Meng bmeng...@gmail.com wrote:
The CPU identification happens in x86_cpu_init_f() and corresponding
fields are saved in the global data for later use.
Signed-off-by: Bin Meng bmeng...@gmail.com
---
Changes for v2:
- Update the patch per review
Hi Bin,
On 9 November 2014 07:19, Bin Meng bmeng...@gmail.com wrote:
Using MSR_PLATFORM_INFO (0xCE) to calibrate TSR will cause #GP on
processors which do not have this MSR. Instead only doing the MSR
calibration for known/supported CPUs.
Signed-off-by: Bin Meng bmeng...@gmail.com
Acked-by:
On 9 November 2014 07:19, Bin Meng bmeng...@gmail.com wrote:
Use the same way that Linux does for quick TSC calibration via PIT
when calibration via MSR fails.
Signed-off-by: Bin Meng bmeng...@gmail.com
Acked-by: Simon Glass s...@chromium.org
Applied to u-boot-x86/master, thanks!
On 9 November 2014 07:19, Bin Meng bmeng...@gmail.com wrote:
Return the saved TSC frequency in get_tbclk_mhz().
Signed-off-by: Bin Meng bmeng...@gmail.com
Acked-by: Simon Glass s...@chromium.org
Tested-by: Simon Glass s...@chromium.org
Applied to u-boot-x86/master, thanks!
Hi,
On 8 November 2014 12:40, Simon Glass s...@chromium.org wrote:
On 7 November 2014 02:49, Bin Meng bmeng...@gmail.com wrote:
On Fri, Nov 7, 2014 at 4:20 AM, Simon Glass s...@chromium.org wrote:
Instead of an x86-specific cpu_init_f() function, use the normal U-Boot one
for this purpose.
From: Fabio Estevam fabio.este...@freescale.com
Since kernel 3.15 there are two dtb's for the imx53-qsb board:
imx53-qsb.dtb - For the boards with DA9053 PMIC
imx53-qsrb.dtb - For the boards with MC34708 PMIC
Change the 'fdt_file' dynamically, so that the correct dtb can be used depending
on
Hi,
On Mon, Nov 10, 2014 at 01:47:48PM -0500, Tom Rini wrote:
On Thu, Nov 06, 2014 at 08:44:27AM -0600, Felipe Balbi wrote:
BeagleBoard-X15 is the next generation Open Source
Hardware BeagleBoard based on TI's AM5728 SoC
featuring dual core 1.5GHZ A15 processor. The
platform features
On Mon, Nov 10, 2014 at 5:38 PM, Fabio Estevam feste...@gmail.com wrote:
From: Fabio Estevam fabio.este...@freescale.com
Since kernel 3.15 there are two dtb's for the imx53-qsb board:
imx53-qsb.dtb - For the boards with DA9053 PMIC
imx53-qsrb.dtb - For the boards with MC34708 PMIC
Change
BeagleBoard-X15 is the next generation Open Source
Hardware BeagleBoard based on TI's AM5728 SoC
featuring dual core 1.5GHZ A15 processor. The
platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated HDMI (1920x108@60),
separate LCD port, video In port, 4GB eMMC, uSD,
On Monday, November 10, 2014 at 02:01:50 AM, Peng Fan wrote:
[...]
+
in usb_phy_mode, query a PHY for it's mode.
And righter after usb_phy_enable in ehci-mx6.c.
- type = usb_phy_enable(index, ehci) ? USB_INIT_DEVICE :
USB_INIT_HOST;
+ usb_phy_enable(index, ehci);
+
Enable md5sum to check the MD5 of the read and written files to check
their contents for validity.
Use map_sysmem() to map buffer in a sandbox environment.
Signed-off-by: Suriyan Ramasami suriya...@gmail.com
Acked-by: Simon Glass s...@chromium.org
---
Changes in v7:
* No changes
Change the internal fat functions to use loff_t for offsets.
Signed-off-by: Suriyan Ramasami suriya...@gmail.com
---
Changes in v7:
* Split it so that its bisectable.
common/cmd_fat.c | 9 ++--
common/env_fat.c | 4 +-
fs/fat/fat.c | 133
Change the internal ext4 functions to use loff_t for offsets.
Signed-off-by: Suriyan Ramasami suriya...@gmail.com
---
Changes in v7:
* Split it so that its bisectable.
common/cmd_ext4.c | 61 +++
fs/ext4/ext4_common.c | 24
Change the internal ext4 functions to use loff_t for offsets.
Signed-off-by: Suriyan Ramasami suriya...@gmail.com
---
Changes in v7:
* Split it so that its bisectable.
arch/sandbox/cpu/os.c| 13
arch/sandbox/cpu/state.c | 8 ++---
common/board_f.c | 8 ++---
The sandbox/ext4/fat/generic fs commands do not gracefully deal with file
greater than 2GB. Negative values are returned in such cases.
To handle this, the fs functions have been modified to take an additional
parameter of type * loff_t which is then populated. The return value of
the fs
Test size/read/write commands in a sandbox environment.
Signed-off-by: Suriyan Ramasami suriya...@gmail.com
---
Changes in v7:
* Simon
- take care of fat/vfat in mkfs
- fs/nonfs test code repeats, put it in function
test/fs/fs-test.sh | 561
Update: my board_late_init() function wasn’t working because I defined
BOARD_LATE_INIT instead of CONFIG_BOARD_LATE_INIT. Doh!
Since arch/arm/lib/board.c file is being removed, and when
CONFIG_SYS_GENERIC_BOARD is defined, we are now using…
common/board_f.c (for pre-relocation init)
On Wed, Oct 29, 2014 at 11:21:38PM +0100, Rabin Vincent wrote:
sandbox crashes if a variable is set in the -c command, because
hush's top_vars is not allocated. Call cli_init() from sandbox
to ensure this is done before we execute the -c command.
$ ./u-boot -c 'a=1'
...
Segmentation
On Sat, Oct 25, 2014 at 07:38:31AM -0400, Tom Rini wrote:
The pmic_spi_free function isn't ever used, and as the frameworks stand
today, cannot be, so remove it. Integrate the probe function into
pmic_reg as it's not really a probe today. Finally, add an err label
for the common failure
On Wed, Oct 22, 2014 at 05:17:49PM +0300, Noam Camus wrote:
From: Noam Camus no...@ezchip.com
I believe that when no DTB is around we should return 1.
This why I fixed such scenarious to not return zero anymore.
Else kernel might get NULL pointer to DTB which doesn't exists.
On Wed, Oct 29, 2014 at 11:21:39PM +0100, Rabin Vincent wrote:
Attempting to run:
- an empty string
- a string with just spaces
returns different error codes, 1 for the empty string and 0
for the string with just spaces. Make both of them return
0 for consistency.
Signed-off-by:
On Wed, Oct 29, 2014 at 11:21:37PM +0100, Rabin Vincent wrote:
Attempting to run the sandbox leads to a segfault, because some dynamic
libraries (outside of u-boot) attempt to use malloc() to allocate memory
before u-boot's gd variable is initialized.
Check for gd not being NULL in the
On Thu, Oct 30, 2014 at 11:06:10AM +0900, Masahiro Yamada wrote:
Since Linux 3.18-rc1, Kbuild is able to handle multi-objs
dependency correctly, which also allows us futher cleanups
of some makefiles.
This commit imports those commits:
[1] commit c8589d1e9e01 by Masahiro Yamada
kbuild:
On Wed, Oct 29, 2014 at 11:21:40PM +0100, Rabin Vincent wrote:
Hush segfaults if it sees a syntax error while attempting to parse a
command:
$ ./u-boot -c '
...
syntax error
Segmentation fault (core dumped)
This is due to a NULL pointer dereference of in_str-p in static_peek().
On Wed, Oct 29, 2014 at 11:21:41PM +0100, Rabin Vincent wrote:
run_command() returns success even if the command had a syntax error;
correct this behaviour.
Signed-off-by: Rabin Vincent ra...@rab.in
Acked-by: Simon Glass s...@chromium.org)
Applied to u-boot/master, thanks!
--
Tom
On Thu, Oct 30, 2014 at 10:58:32AM +0900, Masahiro Yamada wrote:
Now we stick to Linux Kernel's build system, so squash
clobber to clean target.
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
On Thu, Oct 30, 2014 at 11:06:09AM +0900, Masahiro Yamada wrote:
This commit imports updates of scripts/Makefile.host
from Linux 3.18-rc1.
Imported commits are:
[1] commit d8d9efe22709 by Masahiro Yamada
kbuild: fix a typo in scripts/Makefile.host
[2] commit edb950c17de0 by Masahiro
On Wed, Nov 05, 2014 at 12:30:18AM +0100, Dominic Sacré wrote:
On architectures where 'long' is 64 bit, the u-boot environment
as seen by the fw_env tools was missing 4 bytes.
This patch fixes getenvsize(), and thus also ensures that the
environment's CRC32 checksum is calculated correctly.
On Thu, Oct 30, 2014 at 11:06:12AM +0900, Masahiro Yamada wrote:
This commit imports Kconfig updates from Linux 3.18-rc1.
'kvmconfig' and 'tinyconfig' help message have been commented out
since they are unavailable at least now; in the future perhaps
we can implement 'tinyconfig' to
On Thu, Nov 06, 2014 at 02:39:05PM +0200, Timo Ketola wrote:
Correct environment variable for output directory is KBUILD_OUTPUT.
Signed-off-by: Timo Ketola t...@exertus.fi
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
On Thu, Oct 30, 2014 at 11:06:13AM +0900, Masahiro Yamada wrote:
This commit imports some updates in misc scripts from Linux 3.18-rc1.
[1] commit cbb4d3e6510b99522719c5ef0 by Horia Geanta
scripts/kernel-doc: handle object-like macros
[2] commit 164f0d2efaaef83 by Michal Marek
kbuild: Fix
On Thu, Oct 30, 2014 at 11:06:11AM +0900, Masahiro Yamada wrote:
Since Linux 3.15, relative path feature and related fixes,
cleanups have been merged to the top Makefile.
The relative path feature looks stable enough, so let's import it
to U-Boot along with various cleanups.
Commits
On Fri, Oct 31, 2014 at 01:57:42PM +0100, Stefan Roese wrote:
All the other files in drivers/mtd/* are not really CFI related. So lets
only include the files that are CFI specific.
Signed-off-by: Stefan Roese s...@denx.de
Cc: Heiko Schocher h...@denx.de
Cc: Scott Wood
On Thu, Nov 06, 2014 at 02:02:57PM +0100, Wolfgang Denk wrote:
There are a number of places where U-Boot intentionally and legally
accesses physical address 0x, for example when installing
exception vectors on systems where these are located in low memory.
Add cppcheck-suppress
On Thu, Nov 06, 2014 at 02:03:00PM +0100, Wolfgang Denk wrote:
Fix error detected by cppcheck:
[drivers/net/uli526x.c:551]: (error) printf format string requires 3
parameters but only 2 are given.
Signed-off-by: Wolfgang Denk w...@denx.de
Cc: Roy Zang tie-fei.z...@freescale.com
Applied
On Thu, Nov 06, 2014 at 02:03:05PM +0100, Wolfgang Denk wrote:
cppcheck reports:
[board/esd/common/auto_update.c:458]: (error) Uninitialized variable: cnt
The variable is not really used anywhere, so remove it.
Signed-off-by: Wolfgang Denk w...@denx.de
Cc: Matthias Fuchs
On Thu, Nov 06, 2014 at 02:02:58PM +0100, Wolfgang Denk wrote:
Fix error detected by cppcheck:
[board/cogent/lcd.c:237]: (error) Invalid number of character (()
when these macros are defined:
'CONFIG_SHOW_ACTIVITY;CONFIG_STATUS_LED'.
Signed-off-by: Wolfgang Denk w...@denx.de
Applied to
1 - 100 of 178 matches
Mail list logo