2016-01-19 19:01 GMT+01:00 Tom Rini :
> The iocon and bamboo boards are often on the verge of, or going over,
> their allowed size limits depending on toolchain used. If we turn off
> CONFIG_SYS_LONGHELP we can gain approximately 14KiB back.
>
> Cc: Dirk Eibach
> Cc: Stefan Roese
> Signed-off-by
Hi Simon,
On Mon, 18 Jan 2016 19:57:53 -0700
Simon Glass wrote:
...
> >> Changes in v2:
> >> - Fix Ebabling typo in comment
> >> - Remove duplicated @fb_size line in common
> >> - Fix comment for video_get_ysize()
> >> - Fix reference to \n which should be \b
> >> - Fix 'withthe' typo in comment
This patch adds support for the Armada XP (MV78260) based theadorable
board. Its equipped with onboard DDR3, UART, ethernet, I2C, SPI NOR,
LCD and SATA (SSD) interfaces / devices.
Two defconfigs are added:
theadorable_defconfig:
The production U-Boot version with a stripped down drivers and featu
This patch adds basic support for the LCD controller of the Marvell
Armada XP SoC.
An AXP based custom board port will be added later, to use this
driver to display a splash screen via the bmp command later.
Signed-off-by: Stefan Roese
Cc: Anatolij Gustschin
Cc: Luka Perkov
---
arch/arm/mach-
This patch integrate DPAA2 ethernet driver existing PHY framework.
Call phy_connect and phy_config as per available DPMAC id defined
in SerDes Protcol.
Signed-off-by: Pratiyush Mohan Srivastava
Signed-off-by: Prabhakar Kushwaha
---
drivers/net/ldpaa_eth/ldpaa_eth.c | 116 ++
From: Pratiyush Mohan Srivastava
Environment variable mcinitcmd is defined to initiate MC and DPL deployment
from the location where it is stored(NOR, NAND, SD, SATA, USB)during u-boot
booting.If this variable is not defined then macro MC_BOOT_ENV_VAR will be null
and
MC will not be booted and D
From: Mingkai Hu
Memory controller performance is not optimal with default internal
target queue register value, write required value for optimal DDR
performance.
Signed-off-by: Mingkai Hu
---
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 13 +
arch/arm/include/asm/arch-fsl-l
Hi: Bin,
Could you tell me which tree your patches have been merged into ?
Regards
Wenbin Song
-Original Message-
From: Bin Meng [mailto:bmeng...@gmail.com]
Sent: Tuesday, January 19, 2016 4:03 PM
To: Wenbin Song
Cc: York Sun ; Mingkai Hu ; Qianyu
Gong ; Shaohui Xie ; U-Boot Mail
This patch adds driver support for the Realtek RTL8152B/RTL8153 USB
network adapters.
Signed-off-by: Ted Chen
[swarren, fixed a few compiler warnings]
[swarren, with permission, converted license header to SPDX]
[swarren, removed printf() spew during probe()]
Signed-off-by: Stephen Warren
---
d
From: Prabhakar Kushwaha
Update printf with dpbp_exit to match with previous function call.
Signed-off-by: Itai Katz
Signed-off-by: Prabhakar Kushwaha
---
drivers/net/fsl-mc/mc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/m
From: Prabhakar Kushwaha
As phy_connect and phy_config are being called from DPAA2 driver.
Remove calling of mentioned function from board file.
Signed-off-by: Pratiyush Mohan Srivastava
Signed-off-by: Prabhakar Kushwaha
---
board/freescale/ls2080aqds/eth.c | 25 ---
From: Prabhakar Kushwaha
All fields of struct dprc_cfg are not being configured while creating
child container. "Not" configured fields are assumed to be 0.
So memset dprc_cfg before configuring the fields.
Signed-off-by: Itai Katz
Signed-off-by: Prabhakar Kushwaha
---
drivers/net/fsl-mc/mc.
Hello Tom,
Am 19.01.2016 um 19:08 schrieb Tom Rini:
On Thu, Jan 14, 2016 at 01:02:04PM -0500, Tom Rini wrote:
Both of these boards are very close to their limit and with some toolchains
such as gcc 5.x are too large. Switch to tiny printf to reclaim some size.
Signed-off-by: Tom Rini
Appl
On 19.01.2016 19:01, Tom Rini wrote:
The iocon and bamboo boards are often on the verge of, or going over,
their allowed size limits depending on toolchain used. If we turn off
CONFIG_SYS_LONGHELP we can gain approximately 14KiB back.
Cc: Dirk Eibach
Cc: Stefan Roese
Signed-off-by: Tom Rini
Hi Simon,
>>>
>>> +/**
>>> + * clk_get_by_index() - look up a clock referenced by a device
>>> + *
>>> + * Parse a device's 'clocks' list, returning information on the indexed
>>> clock,
>>> + * ensuring that it is activated.
>>> + *
>>> + * @dev: Device containing the clock reference
>>>
Hi Wenbin,
On Wed, Jan 20, 2016 at 12:29 PM, Wenbin Song wrote:
> Hi: Bin,
>
> Could you tell me which tree your patches have been merged into ?
>
I believe it will be merged via u-boot-dm, cc Simon to confirm.
> Regards
>
> Wenbin Song
>
[snip]
Regards,
Bin
_
Hello Tom,
Am 04.01.2016 um 23:07 schrieb Enric Balletbò i Serra:
From: Ladislav Michl
- move chip reset to separate function
- use CONFIG_SMC911X_BASE instead of hardcoded value
- remove unneeded local variable from board_eth_init.
Signed-off-by: Ladislav Michl
Reviewed-by: Tom Rini
Acked-
Hello Tom,
Am 04.01.2016 um 23:24 schrieb Tom Rini:
On Mon, Jan 04, 2016 at 11:08:02PM +0100, Enric Balletbo i Serra wrote:
From: Ladislav Michl
The patch removes some macros that are not used.
Signed-off-by: Ladislav Michl
Acked-by: Enric Balletbo Serra
Reviewed-by: Tom Rini
Reviewe
Hello Tom,
Am 04.01.2016 um 23:24 schrieb Tom Rini:
On Mon, Jan 04, 2016 at 11:08:01PM +0100, Enric Balletbo i Serra wrote:
From: Ladislav Michl
The patch fixes some indentation style problems in omap3_igep00x0.h file.
Signed-off-by: Ladislav Michl
Acked-by: Enric Balletbo Serra
Reviewe
Hello Tom,
Am 04.01.2016 um 23:23 schrieb Tom Rini:
On Mon, Jan 04, 2016 at 11:08:00PM +0100, Enric Balletbo i Serra wrote:
From: Ladislav Michl
File is already included:
omap3_igep00x0.h -> ti_omap3_common.h -> ti_armv7_omap.h ->
ti_armv7_common.h -> config_distro_defaults.h
Signed-off-by:
Hello Tom,
Am 04.01.2016 um 23:23 schrieb Tom Rini:
On Mon, Jan 04, 2016 at 11:07:58PM +0100, Enric Balletbo i Serra wrote:
Enable CONFIG_NET_RANDOM_ETHADDR to generate a random MAC address
when ETHADDR is not set.
Signed-off-by: Enric Balletbo i Serra
Reviewed-by: Tom Rini
Reviewed-by:
Hello Christophe,
Am 18.01.2016 um 22:22 schrieb Christophe Ricard:
Hi Heiko,
I was expecting such kind of feedback on this one :).
I had myself to hack around between the MLO and the u-boot.img to get it
working.
For omap, i think twl drivers are kind of the main item to convert.
Would
Hi Masahiro,
On 18 January 2016 at 21:29, Masahiro Yamada
wrote:
> Hi Simon,
>
>
> 2016-01-19 11:27 GMT+09:00 Simon Glass :
>> Add a method which can locate a clock for a device, given its index. This
>> uses the normal device tree bindings to return the clock device and the
>> first argument whi
Add a method which can locate a clock for a device, given its index. This
uses the normal device tree bindings to return the clock device and the
first argument which is normally used as a peripheral ID in U-Boot.
Signed-off-by: Simon Glass
---
Changes in v3:
- Use CONFIG_IS_ENABLED(OF_CONTROL)
Hi Bin.
On 19 January 2016 at 02:15, Bin Meng wrote:
> Hi Simon,
>
> On Tue, Jan 19, 2016 at 11:39 AM, Simon Glass wrote:
>> This series adds an interrupt driver for x86. Since different platforms
>> can implement this in their own way, we no-longer need the platform-specific
>> weak function. W
Hi,
On 19 January 2016 at 08:53, Tom Rini wrote:
> On Tue, Jan 19, 2016 at 12:59:10PM +0900, Masahiro Yamada wrote:
>> Hi Simon,
>>
>> 2016-01-18 12:53 GMT+09:00 Simon Glass :
>> > There are a lot of unrelated files in common, including all of the
>> > commands.
>> > Moving them into their own d
Hi Tom,
On 19 January 2016 at 09:53, Tom Warren wrote:
> Simon,
>
>> -Original Message-
>> From: s...@google.com [mailto:s...@google.com] On Behalf Of Simon Glass
>> Sent: Monday, January 18, 2016 7:03 PM
>> To: Tom Warren
>> Cc: U-Boot Mailing List ; Stephen Warren
>> ; Stephen Warren ;
Hi,
On 18 January 2016 at 23:46, Craig McQueen wrote:
>> Tom Rini wrote:
>>
>> On Mon, Jan 11, 2016 at 09:59:18AM -0700, Simon Glass wrote:
>> > Hi Craig,
>> >
>> > On 20 December 2015 at 19:07, Craig McQueen
>> > wrote:
>> > > This is to avoid the boot sequence halting due to initial "junk"
>>
On 18 January 2016 at 21:55, Masahiro Yamada
wrote:
> This commit intends to implement "fixed-clock" as in Linux.
> (drivers/clk/clk-fixed-rate.c in Linux)
>
> If you need a very simple clock to just provide fixed clock rate
> like a crystal oscillator, you do not have to write a new driver.
> Thi
Hi,
On 18 January 2016 at 02:39, Sjoerd Simons
wrote:
> On Thu, 2016-01-14 at 08:51 -0700, Simon Glass wrote:
>> Hi Eddie,
>>
>> On 14 January 2016 at 05:47, Eddie Cai
>> wrote:
>> > Hi Simon
>> >
>> > I think the best way to reduce SPL size is to jump back to boot
>> > rom.
>> > Which don't req
Hi Masahiro,
On 18 January 2016 at 22:15, Masahiro Yamada
wrote:
> 2015-12-28 23:20 GMT+09:00 Simon Glass :
>> Hi Masahiro,
>>
>> On 18 December 2015 at 04:15, Masahiro Yamada
>> wrote:
>>> This commit intends to implement "fixed-clock" as in Linux.
>>> (drivers/clk/clk-fixed-rate.c in Linux)
>>
Hi,
On 18 January 2016 at 22:09, Mugunthan V N wrote:
>
> On Monday 18 January 2016 02:53 PM, Bin Meng wrote:
> > +Simon
> >
> > On Mon, Jan 18, 2016 at 4:47 PM, Mugunthan V N wrote:
> >> Implement a SATA uclass that can represent a SATA controller.
> >>
> >> Signed-off-by: Mugunthan V N
> >> -
Hi,
On 27 December 2015 at 10:28, Mateusz Kulikowski
wrote:
> Add function to poll register waiting for specific bit(s).
> Similar functions are implemented in few drivers - they are almost
> identical and can be generalized.
> Signed-off-by: Mateusz Kulikowski
> ---
>
> include/wait_bit.h | 71
Hi Mateusz,
On 6 January 2016 at 11:21, Mateusz Kulikowski
wrote:
> This commit add support for 96Boards Dragonboard410C.
>
> It is board based on APQ8016 Qualcomm SoC, complying with
> 96boards specification.
>
> Features (present out of the box):
> - 4x Cortex A53 (ARMv8)
> - 2x USB Host port
>
Add a driver for interrupts on queensbay and move the code currently in
cpu_irq_init() into its probe() method.
Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
---
Changes in v3: None
Changes in v2: None
arch/x86/cpu/queensbay/Makefile | 2 +-
arch/x86/cpu/queensbay/irq.c| 65 ++
There are no callers now. Platforms which need to set up interrupts their
own way can implement an interrupt driver. Drop this function.
Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
---
Changes in v3: None
Changes in v2:
- Rebase on top of updated SPI flash series
arch/x86/cpu/irq.c
Hi Stephen,
On 19 January 2016 at 09:49, Stephen Warren wrote:
>
> On 01/18/2016 07:08 PM, Simon Glass wrote:
>>
>> Hi Stephen,
>>
>> On 18 January 2016 at 12:43, Stephen Warren wrote:
>>>
>>> On 01/14/2016 01:26 PM, Simon Glass wrote:
We have standard drivers for panels and backl
Add a driver for interrupts on quark and move the code currently in
cpu_irq_init() into its probe() method.
Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
---
Changes in v3: None
Changes in v2: None
arch/x86/cpu/quark/Makefile | 2 +-
arch/x86/cpu/quark/irq.c| 49 ++
At present interrupt routing is set up from arch_misc_init(). We can do it
a little later instead, in interrupt_init().
This removes the manual pirq_init() call. Where the platform does not have
an interrupt router defined in its device tree, no error is generated. Some
platforms do not have this.
Most x86 interrupt drivers will want to use the standard PIRQ routing and
table setup. Put this code in a common function so it can be used by those
drivers that want it.
Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
---
Changes in v3: None
Changes in v2: None
arch/x86/cpu/irq.c |
We use driver model for this now, so we don't need this string.
Signed-off-by: Simon Glass
---
Changes in v3:
- Add new patch to drop the irq router compatible string
Changes in v2: None
include/fdtdec.h | 1 -
lib/fdtdec.c | 1 -
2 files changed, 2 deletions(-)
diff --git a/include/fdtd
It seems likely that at some point we will want a generic interrupt uclass.
But this is a big undertaking as it involves unifying code across multiple
architectures.
As a first step, create a simple IRQ uclass and a driver for x86. This can
be generalised later as required.
Adjust pirq_init() to
Instead of searching for the device tree node, use the IRQ device which has
a record of it.
Signed-off-by: Simon Glass
---
Changes in v3:
- Add new patch to use the IRQ device when setting up the mptable
Changes in v2: None
arch/x86/cpu/irq.c| 16
arch/x86/lib/mpspec.c |
This series adds an interrupt driver for x86. Since different platforms
can implement this in their own way, we no-longer need the platform-specific
weak function. We can also dispense with the arch_misc_init() call in some
cases.
Changes in v3:
- Add new patch to use the IRQ device when setting u
Re-write the logic in qemu_fwcfg_list_firmware(), add a function
qemu_fwcfg_read_firmware_list() to handle reading firmware list.
Signed-off-by: Miao Yan
---
Changes in v2:
- coding style fix
- add comments in header file
arch/x86/cpu/qemu/fw_cfg.c| 63 +-
This patch adds a config option for loading ACPI table from QEMU. When enabled,
U-Boot won't generate ACPI tables, but use those provided by QEMU.
Signed-off-by: Miao Yan
---
arch/x86/Kconfig | 9 +
arch/x86/cpu/qemu/Makefile | 2 ++
arch/x86/lib/Makefile | 2 ++
3 files c
Currently, if CONFIG_GENERATE_ACPI_TABLE is defined, U-Boot will generate ACPI
tables itlself, this patchset adds the ability to load the ACPI tables generated
by QEMU.
Changes in v2:
- Drop [PATCH 4/4] x86: qemu: loading ACPI table from QEMU, add a config
option
CONFIG_QEMU_ACPI_TABLE
-
This patch adds the ability to load and link ACPI tables provided by QEMU.
QEMU tells guests how to load and patch ACPI tables through its fw_cfg
interface, by adding a firmware file 'etc/table-loader'. Guests are
supposed to parse this file and execute corresponding QEMU commands.
Signed-off-by:
Enable ACPI IO space for piix4 (for pc board) and ich9 (for q35 board)
Signed-off-by: Miao Yan
---
Changes in v2:
- add ACPI_PM1_BASE in Kconfig
- drop PCI device ID checks
arch/x86/cpu/qemu/Kconfig | 7 +++
arch/x86/cpu/qemu/qemu.c| 29 +++
> -Original Message-
> From: york sun
> Sent: Wednesday, January 20, 2016 2:42 AM
> To: Qianyu Gong ; u-boot@lists.denx.de
> Cc: Mingkai Hu ; jt...@openedev.com; Yao Yuan
> ; r58...@freescale.com; Gong Qianyu
>
> Subject: Re: [Patch V4 1/4] spi: fsl_qspi: fix compile warning for 64-bit
>
> -Original Message-
> From: york sun
> Sent: Wednesday, January 20, 2016 2:47 AM
> To: Qianyu Gong ; u-boot@lists.denx.de
> Cc: Mingkai Hu ; jt...@openedev.com; Yao Yuan
> ; r58...@freescale.com; Gong Qianyu
>
> Subject: Re: [Patch V4 2/4] spi: fsl_qspi: Fix qspi_op_rdid memcpy issue
>
Hi Miao,
On Wed, Jan 20, 2016 at 9:58 AM, Miao Yan wrote:
> Hi Bin,
>
> 2016-01-19 17:25 GMT+08:00 Bin Meng :
>> Hi Miao,
>>
>> On Tue, Jan 19, 2016 at 10:46 AM, Miao Yan wrote:
>>> Hi Bin,
>>>
>>> 2016-01-16 21:23 GMT+08:00 Bin Meng :
Hi Miao,
On Fri, Jan 15, 2016 at 11:12 AM, Mi
Hi,
I am an application software guy learning low-level embedded programming.
I am trying to block/disable u-boot console access all together. Is there
any helpful documentation for this topic.
The things I gathered until now:
1. Disable Serial Port pins.
Question - If an attacker gains root
Hi,
I am an application software guy learning low-level embedded programming.
I am trying to block/disable u-boot console access all together. Is there
any helpful documentation for this topic.
The things I gathered until now:
1. Disable Serial Port pins.
Question - If an attacker gains root ac
Hi Bin,
2016-01-19 17:25 GMT+08:00 Bin Meng :
> Hi Miao,
>
> On Tue, Jan 19, 2016 at 10:46 AM, Miao Yan wrote:
>> Hi Bin,
>>
>> 2016-01-16 21:23 GMT+08:00 Bin Meng :
>>> Hi Miao,
>>>
>>> On Fri, Jan 15, 2016 at 11:12 AM, Miao Yan wrote:
Enable ACPI IO space for piix4 (for pc board) and ich9
On Wed, Jan 20, 2016 at 08:54:21AM +0900, Masahiro Yamada wrote:
> Hi Tom,
>
> Sorry for the short interval from the previous one,
> but please pull one more series.
No worries :)
>
>
> The following changes since commit 3ed2ece5e162b104cd3ea3788cae841ecd24408f:
>
> armv8: cavium: Get DRAM
> -Original Message-
> From: york sun
> Sent: Wednesday, January 20, 2016 12:02 AM
> To: Prabhakar Kushwaha ; Ashish Kumar
> ; u-boot@lists.denx.de
> Subject: Re: [PATCH] ls2-2085ardb: Correct the model name of ls2085ardb
>
> On 01/14/2016 08:49 PM, Prabhakar Kushwaha wrote:
> >
> >>
For compatibility clang will report some gcc version. However since we
are checking gcc versions in order to then fail to build, we should
limit these tests only to when we are using gcc and not clang.
Signed-off-by: Tom Rini
---
arch/arm/config.mk |3 ++-
arch/powerpc/config.mk |3
Adapted from:
>From 5631d9c429857194bd55d7bcd8fa5bdd1a9899a3 Mon Sep 17 00:00:00 2001
From: Michal Marek
Date: Wed, 19 Aug 2015 17:36:41 +0200
Subject: [PATCH 1/1] kbuild: Fix clang detection
We cannot detect clang before including the arch Makefile, because that
can set the default cross compil
On Tue, Jan 19, 2016 at 09:16:36PM +0800, Ye Li wrote:
>Initial version for mx6sx SABREAUTO board support with features:
>PMIC, QSPI, NAND flash, SD/MMC, USB, Ethernet, I2C, IO Expander.
>
>Signed-off-by: Ye Li
Tested-by: Peng Fan
>---
> arch/arm/cpu/armv7/mx6/Kconfig |6 +
On Tue, Jan 19, 2016 at 09:16:35PM +0800, Ye Li wrote:
>The i.MX6SX and i.MX6UL has two ENET controllers, add support for reading
>MAC address from fuse for ENET2.
>
>Signed-off-by: Ye Li
Reviewed-by: Peng Fan
>---
> arch/arm/cpu/armv7/mx6/soc.c | 32 +
On Tue, Jan 19, 2016 at 09:07:18PM +0800, Ye Li wrote:
>The OFFSET_BITS_MASK should mask bit from 0-23.
>By using GENMASK(24, 0), when using the fast read common (0xb), a
>invalid sf_addr 0x100 is produced by swab32(txbuf) & OFFSET_BITS_MASK.
>
>Signed-off-by: Ye Li
>---
> drivers/spi/fsl_qspi
On Fri, Jan 15, 2016 at 06:06:10AM +0100, Alexander Graf wrote:
> When an EFI application runs, it has access to a few descriptor and callback
> tables to instruct the EFI compliant firmware to do things for it. The bulk
> of those interfaces are "boot time services". They handle all object
> mana
Hi Tom,
Sorry for the short interval from the previous one,
but please pull one more series.
The following changes since commit 3ed2ece5e162b104cd3ea3788cae841ecd24408f:
armv8: cavium: Get DRAM size from ATF (2016-01-19 22:26:13 +)
are available in the git repository at:
git://git.den
2016-01-17 10:13 GMT+09:00 Masahiro Yamada :
> Masahiro Yamada (4):
> ARM: uniphier: refactor outer cache operation slightly
> ARM: uniphier: factor out outer cache sync as a helper function
> ARM: uniphier: fix range invalidate for outer cache
> ARM: uniphier: set active ways to really ena
2016-01-20 2:05 GMT+09:00 Masahiro Yamada :
> The if block does the same as the else block does. The conditional
> is not necessary at all.
>
> Signed-off-by: Masahiro Yamada
Applied to u-boot-uniphier/master.
--
Best Regards
Masahiro Yamada
___
U-
2016-01-09 2:12 GMT+09:00 Masahiro Yamada :
> The load address of the kernel can be changed via "kernel_addr_r"
> environment. The device tree and the initramdisk should be relocated
> according to the kernel location.
>
> The "bootm_low" should be calculated by masking the lower bits
> (TEXT_OFFS
2016-01-09 2:12 GMT+09:00 Masahiro Yamada :
> U-Boot relocates the device tree and the initramdisk to the tail
> of the memory region before booting the kernel.
>
> Some UniPhier boards are equipped with a large amount of memory.
> For those boards, the device tree and the initramdisk are placed ou
On Tuesday, January 19, 2016 at 04:50:06 PM, Dinh Nguyen wrote:
> Hi Marek,
Hi Dinh,
> On 01/19/2016 09:16 AM, Dinh Nguyen wrote:
> > Revert "arm: socfpga: set the fpga global bit to disable HPS to FPGA
> > signals"
>
> I apologize for the original patch "arm: socfpga: set the fpga global
> bit
On Tuesday, January 19, 2016 at 04:16:21 PM, Dinh Nguyen wrote:
> Revert "arm: socfpga: set the fpga global bit to disable HPS to FPGA
> signals"
>
> Apparently, the logic for the FPGA global bit is not universal between Gen5
> and Gen10 devices is not the same. Disabling this bit, while applicabl
On Wed, Oct 14, 2015 at 09:55:48AM -0700, Sergey Temerkhanov wrote:
> On some systems, UART initialization is performed before running U-Boot.
> This commit allows to skip UART re-initializaion on those systems
>
> Signed-off-by: Sergey Temerkhanov
> Signed-off-by: Radha Mohan Chintakuntla
> Re
On Wed, Oct 14, 2015 at 09:55:51AM -0700, Sergey Temerkhanov wrote:
> This commit adds functions issuing calls to the product-specific ATF
> services
>
> Signed-off-by: Sergey Temerkhanov
> Signed-off-by: Radha Mohan Chintakuntla
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Descr
On Wed, Oct 14, 2015 at 09:55:52AM -0700, Sergey Temerkhanov wrote:
> Change the dram_init() function on ThunderX to query ATF services for
> the real installed DRAM size
>
> Signed-off-by: Sergey Temerkhanov
> Signed-off-by: Radha Mohan Chintakuntla
Applied to u-boot/master, thanks!
--
Tom
On Wed, Oct 14, 2015 at 09:55:47AM -0700, Sergey Temerkhanov wrote:
> This commit adds the psci.h header file from Linux kernel
> which contains definitions related to the PSCI interface provided
> by firmware
>
> Signed-off-by: Sergey Temerkhanov
> Signed-off-by: Radha Mohan Chintakuntla
Appl
On Wed, Oct 14, 2015 at 09:55:50AM -0700, Sergey Temerkhanov wrote:
> This commit adds basic Cavium ThunderX 88xx board definitions and support.
>
> Signed-off-by: Sergey Temerkhanov
> Signed-off-by: Radha Mohan Chintakuntla
With a minor change for current API, applied to u-boot/master, thanks
On Wed, Oct 14, 2015 at 09:55:46AM -0700, Sergey Temerkhanov wrote:
> This commit adds functions issuing calls to secure monitor or
> hypervisore. This allows using services such as Power State
> Coordination Interface (PSCI) provided by firmware, e.g. ARM
> Trusted Firmware (ATF)
>
> The SMC cal
On Wed, Oct 14, 2015 at 09:55:49AM -0700, Sergey Temerkhanov wrote:
> This commit adds the FDT for the ThunderX family of SoCs
>
> Signed-off-by: Sergey Temerkhanov
> Signed-off-by: Radha Mohan Chintakuntla
>
> Reviewed-by: Simon Glass
Applied to u-boot/master, thanks!
--
Tom
signature.a
On Wed, Oct 14, 2015 at 09:55:45AM -0700, Sergey Temerkhanov wrote:
> This patch adds code which sets up 2-level page tables on ARM64 thus
> extending available VA space. CPUs implementing 64k translation
> granule are able to use direct PA-VA mapping of the whole 48 bit
> address space.
> It also
On Wed, Oct 14, 2015 at 09:55:44AM -0700, Sergey Temerkhanov wrote:
> This patch adds the read_mpidr() function which returns the
> MPIDR_EL1 register value
>
> Signed-off-by: Sergey Temerkhanov
> Signed-off-by: Radha Mohan Chintakuntla
>
> Reviewed-by: Simon Glass
Applied to u-boot/master,
On Wed, Oct 14, 2015 at 09:54:24AM -0700, Sergey Temerkhanov wrote:
> This patch adds Kconfig entries to facilitate usage of pl01x as
> a debug UART.
>
> Signed-off-by: Sergey Temerkhanov
> Signed-off-by: Radha Mohan Chintakuntla
>
> Acked-by: Simon Glass
Applied to u-boot/master, thanks!
-
On Wed, Oct 14, 2015 at 09:54:23AM -0700, Sergey Temerkhanov wrote:
> This patch adds an ability to use pl01x as a debug UART. It must
> be configured like other types of debug UARTs
>
> Signed-off-by: Sergey Temerkhanov
> Signed-off-by: Radha Mohan Chintakuntla
>
> Acked-by: Simon Glass
Wit
On 01/10/2016 06:14 PM, Gong Qianyu wrote:
> From: Gong Qianyu
>
> This patch fixes the following compile warning:
> drivers/spi/fsl_qspi.c: In function 'fsl_qspi_probe':
> drivers/spi/fsl_qspi.c:937:15:
> warning: cast to pointer from integer of different size
>
On 01/10/2016 06:15 PM, Gong Qianyu wrote:
> From: Gong Qianyu
>
> In current driver everytime we memcpy 4 bytes to the dest memory
> regardless of the remaining length.
> This patch adds checking the remaining length before memcpy.
> If the length is shorter than 4 bytes, memcpy the actual lengt
On 01/14/2016 08:49 PM, Prabhakar Kushwaha wrote:
>
>> -Original Message-
>> From: york sun [mailto:york@nxp.com]
>> Sent: Thursday, January 14, 2016 10:36 PM
>> To: Ashish Kumar ; u-boot@lists.denx.de
>> Cc: Prabhakar Kushwaha
>> Subject: Re: [PATCH] ls2-2085ardb: Correct the model n
On Mon, Jan 18, 2016 at 02:17:43PM +0530, Mugunthan V N wrote:
> Enable sata driver model for dra72_evm as dwc_ahci supports
> driver model
>
> Signed-off-by: Mugunthan V N
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: Digital signature
___
On Mon, Jan 18, 2016 at 02:17:42PM +0530, Mugunthan V N wrote:
> Enable sata driver model for dra74_evm as dwc_ahci supports
> driver model
>
> Signed-off-by: Mugunthan V N
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: Digital signature
___
On Mon, Jan 18, 2016 at 02:17:40PM +0530, Mugunthan V N wrote:
> Prepare sata driver for DM conversion by abstracting sata phy
> init to seperate function.
>
> Signed-off-by: Mugunthan V N
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: Digital signature
___
On Mon, Jan 18, 2016 at 02:17:41PM +0530, Mugunthan V N wrote:
> Implement a sata driver for Synopsys DWC sata device based on
> U-boot driver model.
>
> Signed-off-by: Mugunthan V N
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: Digital signature
_
On Mon, Jan 18, 2016 at 07:29:32AM -0800, Bin Meng wrote:
> With driver model timer conversion, quark based board does not boot
> any more as mdelay() is called during quark_pcie_early_init() which
> is before driver model gets initialized. Fix this breakage.
>
> Signed-off-by: Bin Meng
> Review
On Mon, Jan 18, 2016 at 02:17:38PM +0530, Mugunthan V N wrote:
> All the clocks which has to be enabled has to be done in
> enable_basic_clocks(), so moving enable sata clock to common
> clocks enable function.
>
> Signed-off-by: Mugunthan V N
Reviewed-by: Tom Rini
--
Tom
signature.asc
Des
On Sat, Jan 16, 2016 at 02:50:26PM +, Tom Rini wrote:
> With gcc-5.x we get:
> drivers/pci/pci_rom.c: In function 'dm_pci_run_vga_bios':
> drivers/pci/pci_rom.c:352:3: warning: 'ram' may be used uninitialized in
> this function [-Wmaybe-uninitialized]
>
> While unconvinced that this can happe
On Sun, Jan 17, 2016 at 02:42:41AM +, Tom Rini wrote:
> We need to use %lx not %x to describe a fdt_addr_t
>
> Cc: Simon Glass
> Signed-off-by: Tom Rini
Reworded the subject and applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
__
On Sun, Jan 17, 2016 at 02:44:37AM +, Tom Rini wrote:
> With gcc-5.3 we get a warning for using switch() on a bool type.
> Rewrite these sections as if/else and update the one section that was
> using 1/0 instead of true/false.
>
> Cc: Simon Glass
> Cc: Przemyslaw Marczak
> Signed-off-by: T
On Thu, Jan 14, 2016 at 10:05:13PM -0500, Tom Rini wrote:
> In a number of places we had wordings of the GPL (or LGPL in a few
> cases) license text that were split in such a way that it wasn't caught
> previously. Convert all of these to the correct SPDX-License-Identifier
> tag.
>
> Signed-off
On Thu, Jan 14, 2016 at 01:02:05PM -0500, Tom Rini wrote:
> Only when we have CONFIG_CMD_UNZIP enabled do we have the 'gzwrite'
> command. While this command should be separated from CONFIG_CMD_UNZIP
> we should also only include the write portion of the gz code in that
> case as well.
>
> Signe
On Thu, Jan 14, 2016 at 06:24:44PM -0500, Tom Rini wrote:
> A general best practice for SPDX is that Makefiles should have an
> identifier, add these as everything else is currently covered.
>
> Signed-off-by: Tom Rini
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digi
On Thu, Jan 14, 2016 at 01:02:04PM -0500, Tom Rini wrote:
> Both of these boards are very close to their limit and with some toolchains
> such as gcc 5.x are too large. Switch to tiny printf to reclaim some size.
>
> Signed-off-by: Tom Rini
Applied to u-boot/master, thanks!
--
Tom
signatur
On Tue, Jan 19, 2016 at 08:58:45AM +0100, Anatolij Gustschin wrote:
> Hi Tom,
>
> The following changes since commit 52bc7c7e2b31d6ba8d394f3d22b551abfa365363:
>
> eeprom: fix eeprom write procedure (2015-12-16 10:31:31 -0500)
>
> are available in the git repository at:
>
> git://git.denx.d
On Thu, Jan 14, 2016 at 01:02:03PM -0500, Tom Rini wrote:
> Enabling this function always removes some class of string saftey issues.
> The size change here in general is about 400 bytes and this seems a reasonable
> trade-off.
>
> Cc: Peng Fan
> Cc: Peter Robinson
> Cc: Fabio Estevam
> Cc: Ad
On Fri, Dec 18, 2015 at 02:17:10PM +0900, Masahiro Yamada wrote:
> Currently, this function returns wrong size if "bootm_low" is defined,
> but "bootm_size" is not.
>
> Signed-off-by: Masahiro Yamada
> Reviewed-by: Simon Glass
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Descript
1 - 100 of 161 matches
Mail list logo