I didn't see a dedicated list to send bug reports so sending it here:
There is a use after free in kwbimage, found by building u-boot with the
use after free detection enabled with OpenBSD's malloc. When building
the clearfog target:
MKIMAGE u-boot-spl.kwb
Segmentation fault (core dumped)
kwb
On 10/18/2016 09:28 PM, Darwin Dingel wrote:
> Core hang occurs when using L1 stashes. Workaround is to disable L1
> stashes so software uses L2 cache for stashes instead.
>
This patch is missing the signed-off-by signature from the author.
> Reviewed-by: Chris Packham
> Cc: York Sun
> ---
> a
On 10/18/2016 07:48 PM, Hamish Martin wrote:
> This erratum is already implemented for other ARM based QorIQ
> platforms with the Gen4 DDR controller. Port the fix to the Gen3
> controller and enable it for T2080 and T2081.
>
> Reviewed-by: Chris Packham
> Signed-off-by: Hamish Martin
> Cc: York
Like [1], reset the FLP burst timing for the KSZ9031 to the 16ms
specified by the IEEE802.3 standard from the chip's default of 8ms.
For more details, see the "Auto-Negotiation Timing" section of the
KSZ9031RNX datasheet.
[1] https://patchwork.kernel.org/patch/6558371/
Signed-off-by: Ash Charles
Like [1], reset the FLP burst timing for the KSZ9031 to the 16ms
specified by the IEEE802.3 standard from the chip's default of 8ms.
For more details, see the "Auto-Negotiation Timing" section of the
KSZ9031RNX datasheet.
[1] https://patchwork.kernel.org/patch/6558371/
Change-Id: I122ee33300db3a
From: Stephen Warren
The Synopsys DWC EQoS is a configurable Ethernet MAC/DMA IP block which
supports multiple options for bus type, clocking and reset structure, and
feature list.
This patch imports the binding from the Linux kernel, including my V3
patch to extend the binding to cover the Tegr
From: Stephen Warren
This driver supports the Synopsys Designware Ethernet QoS (Quality of
Service) a/k/a eqos IP block, which is a different design than the HW
supported by the existing designware.c driver. The IP supports many
options for bus type, clocking/reset structure, and feature list. Th
On 10/16/2016 10:35 PM, Prabhakar Kushwaha wrote:
> Hi Mingkai,
>
>> -Original Message-
>> From: Pratiyush Srivastava [mailto:pratiyush.srivast...@nxp.com]
>> Sent: Wednesday, October 12, 2016 5:46 PM
>> To: u-boot@lists.denx.de
>> Cc: york sun ; Prabhakar Kushwaha
>> ; Pratiyush Srivastava
On 10/20/2016 01:34 PM, Stephen Warren wrote:
> On 10/19/2016 11:06 PM, york sun wrote:
>> On 10/19/2016 06:01 PM, Stephen Warren wrote:
>>> On 10/19/2016 04:32 PM, york sun wrote:
On 10/19/2016 12:18 PM, Stephen Warren wrote:
> On 10/19/2016 09:25 AM, Stephen Warren wrote:
>> On 10/14
On 10/21/2016 03:28 AM, Wenbin song wrote:
> The LS1043A rev1.1 silicon supports two types of GIC offset: 4K alignment
> and 64K alignment. 4K alignment is consistent with rev1.0 implement.
>
> The default GIC offset in kernel device tree is using 64K alignment,
> if rev1.0 silicon used, need to fi
On 10/11/2016 05:24 PM, Joe Hershberger wrote:
Hi Stephen,
On Tue, Sep 27, 2016 at 12:02 AM, Stephen Warren wrote:
On 09/23/2016 03:49 PM, Joe Hershberger wrote:
Hi Stephen,
Thanks for sending this! I have some comments below.
Cheers,
-Joe
On Mon, Sep 12, 2016 at 12:48 PM, Stephen Warren
On 10/20/2016 01:30 PM, Joe Hershberger wrote:
On Thu, Oct 20, 2016 at 2:19 PM, Stephen Warren wrote:
On 10/20/2016 12:48 PM, Simon Glass wrote:
Hi,
On 19 October 2016 at 15:14, Stephen Warren wrote:
On 10/19/2016 12:29 PM, Joe Hershberger wrote:
Hi Stephen,
On Mon, Oct 17, 2016 at 1:
On 10/20/2016 01:40 PM, Tom Rini wrote:
- Add a PPA for a more recent qemu (required for PowerPC to work)
- Add tests to run test.py for various QEMU platforms. This relies on
swarren's uboot-test-hooks repository to provide the abstractions.
Overall, the series,
Acked-by: Stephen Warren
A
On 10/20/2016 11:37 PM, Prabhakar Kushwaha wrote:
> Migration of IFC_BANK_COUNT from Kconfig to config.h avoids adding
> SoC name in Kconfig as Dependencies. It will help in having
> all SoC related defines in config.h - easy to maintain.
>
Prabhakar,
Why do you want to go back to config.h? I thi
On 10/21/2016 03:28 AM, Wenbin song wrote:
> The LS1043A rev1.1 silicon supports two types of GIC offset: 4K alignment
> and 64K alignment. The bit SCFG_GIC400_ALIGN[GIC_ADDR_BIT] is used to choose
> which offset will be used.
>
> If GIC_ADDR_BIT bit is set, 4K alignment is used, or else 64K alignm
On 10/21/2016 06:43 AM, Alexander Graf wrote:
> The LS2080 chips have USB available, so we can easily add USB boot
> support to the distro boot order.
>
> Signed-off-by: Alexander Graf
> ---
> include/configs/ls2080ardb.h | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/include/configs/ls
On Thu, Oct 20, 2016 at 08:07:24PM +0300, Sam Protsenko wrote:
> Hi guys,
>
> I'd like to make two changes on how raw MMC address and size of U-Boot
> are represented. But I think it's better to discuss it first, so we
> are on the same page about it.
>
> Basically I want to review two config opt
Hi
On 10/21/2016 08:52 PM, Raschen Josef wrote:
>
>> I think this is related with below commit...
>
>> commit 6dffdbc3a5911e768be21850a612bfb4871a23ef
>> Author: Wenyou Yang
>> Date: Sun Sep 18 09:01:22 2016 +0800
>>
>>mmc: sdhci: Add the programmable clock mode support
>>
>>Add the p
Check BOOT_CFG2[3:4] to determine which SD/MMC port is selected to boot
from. If MMC2 is selected return BOOT_DEVICE_MMC2. In all other cases
return BOOT_DEVICE_MMC1, as we do not have corresponding macro for MMC3
and MMC4.
Signed-off-by: Marcin Niestroj
---
arch/arm/imx-common/spl.c | 6 +-
To prevent the wrong value check the SD version.
Signed-off-by: Jaehoon Chung
---
drivers/mmc/sdhci.c | 8 +---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 10ff57e..766e9ee 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sd
The LS2080 chips have USB available, so we can easily add USB boot
support to the distro boot order.
Signed-off-by: Alexander Graf
---
include/configs/ls2080ardb.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 045cee6..79b15
Hi,
On Thu, 20 Oct 2016 20:07:24 +0300
Sam Protsenko semen.protse...@linaro.org wrote:
...
> 1. CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS
>
> Simple grep shows us that noone actually uses this constant
> (despite it's being defined for multiple boards). So I'm thinking to
> remove it altogether. Wha
Current Makefile.spl passes -R parameter which is not empty
and pointing to ./ folder.
"./tools/mkimage -T zynqmpimage -R ./"" -d spl/u-boot-spl.bin
spl/boot.bin"
That's why mkimage is trying to parse ./ file and generate
register init which is wrong.
Check that passed filename is regular file. If
On Thu, Oct 20, 2016 at 06:58:31PM +0300, Sam Protsenko wrote:
> Signed-off-by: Sam Protsenko
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listi
On Thu, Oct 20, 2016 at 06:58:28PM +0300, Sam Protsenko wrote:
> Some boards (like AM57x EVM) has USB OTG controller other than 0. So in
> order to use correct controller number in compiled environment we should
> define CONFIG_FASTBOOT_USB_DEV option.
>
> For example, when doing "fastboot reboot
On Fri, Oct 21, 2016 at 09:39:28AM +0200, Heiko Schocher wrote:
> Hello Tom,
>
> Am 20.10.2016 um 21:26 schrieb Tom Rini:
> >We currently will always see a number of warnings due to device tree
> >issues. These (and other warnings) should not make the build be marked
> >as failure so catch exit s
On Thu, Oct 20, 2016 at 06:58:29PM +0300, Sam Protsenko wrote:
> On "fastboot reboot-bootloader" we check "dofastboot" variable and do
> "fastboot 0" command in U-Boot if it's 1. But there are boards which have
> USB controller number other than 0, so it should be respected when
> performing "fast
On Thu, Oct 20, 2016 at 06:58:30PM +0300, Sam Protsenko wrote:
> Enable USB download gadget (needed for fastboot support) and all
> dependencies.
>
> Signed-off-by: Sam Protsenko
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: Digital signature
_
Hi
On 10/21/2016 04:40 PM, Jaehoon Chung wrote:
> Hi,
>
> On 10/21/2016 03:32 PM, Bin Meng wrote:
>> +Simon, Stefan,
>>
>> On Fri, Oct 21, 2016 at 12:36 PM, Jaehoon Chung
>> wrote:
>>> Hi,
>>>
>>> On 10/21/2016 01:27 AM, Raschen Josef wrote:
Hi,
Reading a kernel image from an SD
Hi,
On 21-10-16 12:06, Andre Przywara wrote:
Hi,
On 21/10/16 10:31, Jagan Teki wrote:
On Fri, Oct 21, 2016 at 5:41 AM, Andre Przywara wrote:
The sun8i-emac driver works fine with the A64 Ethernet IP, but we are
missing an alias entry to trigger the driver instantiation by U-Boot.
Add the lin
Hi,
On 21/10/16 10:31, Jagan Teki wrote:
> On Fri, Oct 21, 2016 at 5:41 AM, Andre Przywara
> wrote:
>> The sun8i-emac driver works fine with the A64 Ethernet IP, but we are
>> missing an alias entry to trigger the driver instantiation by U-Boot.
>> Add the line to point U-Boot to the Ethernet DT
On Fri, Oct 21, 2016 at 6:54 AM, Andre Przywara wrote:
> From: Amit Singh Tomar
>
> Mostly by adding MACH_SUN50I to some existing #ifdefs enable support
> for the the HCI0 USB host controller on the A64.
> Fix up some minor 64-bit hiccups on the way.
> Add the bare minimum DT bits to the A64 .dts
On Fri, Oct 21, 2016 at 5:41 AM, Andre Przywara wrote:
> The sun8i-emac driver works fine with the A64 Ethernet IP, but we are
> missing an alias entry to trigger the driver instantiation by U-Boot.
> Add the line to point U-Boot to the Ethernet DT node.
> This enables TFTP boot on the Pine64.
>
>
Hello Tom,
Am 20.10.2016 um 21:26 schrieb Tom Rini:
- Add a PPA for a more recent qemu (required for PowerPC to work)
- Add tests to run test.py for various QEMU platforms. This relies on
swarren's uboot-test-hooks repository to provide the abstractions.
Signed-off-by: Tom Rini
---
.trav
The LS1043A rev1.1 silicon supports two types of GIC offset: 4K alignment
and 64K alignment. 4K alignment is consistent with rev1.0 implement.
The default GIC offset in kernel device tree is using 64K alignment,
if rev1.0 silicon used, need to fixup the GIC node to use 4K alignment.
Signed-off-by
The default MSI node in kernel tree is for LS1043A rev1.1 silicon,
if rev1.0 silicon used, need to fixup the MSI node to match it.
Signed-off-by: Wenbin Song
Signed-off-by: Mingkai Hu
---
Changes for v3:
Replace CONFIG_LS1043A with HAS_FEATURE_ENHACED_MSI.
---
arch/arm/cpu/armv8/fsl-lay
The LS1043A rev1.1 silicon supports two types of GIC offset: 4K alignment
and 64K alignment. The bit SCFG_GIC400_ALIGN[GIC_ADDR_BIT] is used to choose
which offset will be used.
If GIC_ADDR_BIT bit is set, 4K alignment is used, or else 64K alignment is used.
64K alignment is the default setting.
On 10/21/2016 08:52 AM, Marcel Ziswiler wrote:
> Hi Simon
>
> On Thu, 2016-10-20 at 13:06 -0600, Simon Glass wrote:
>> Only three serial drivers remain to be converted. This series drops
>> two of those, since the boards appear to be unmaintained.
>>
>> With this, only blackfin remains.
>>
>> The
Hello Tom,
Am 20.10.2016 um 21:26 schrieb Tom Rini:
We don't need to use TEST_CMD in order to run tests. We need a BUILDMAN
and TOOLCHAIN variable to avoid having to duplicate logic or write some
wrapper function. But this makes the tests harder as we add more
complex examples.
Signed-off-by:
Hello Tom,
Am 20.10.2016 um 21:26 schrieb Tom Rini:
We can now build for microblaze, sh4 and xtensa.
Signed-off-by: Tom Rini
---
.travis.yml | 9 +
1 file changed, 9 insertions(+)
Reviewed-by: Heiko Schocher
bye,
Heiko
diff --git a/.travis.yml b/.travis.yml
index 8d1a90eb164b.
Hello Tom,
Am 20.10.2016 um 21:26 schrieb Tom Rini:
- Drop the 'cache' line, travis-ci says to not cache apt packages (and
does not).
- Get the Ubuntu provided toolchain for ARM and PowerPC.
- Add more toolchain options that buildman can fetch.
Signed-off-by: Tom Rini
---
.travis.yml | 59
Hi,
On 10/21/2016 03:32 PM, Bin Meng wrote:
> +Simon, Stefan,
>
> On Fri, Oct 21, 2016 at 12:36 PM, Jaehoon Chung
> wrote:
>> Hi,
>>
>> On 10/21/2016 01:27 AM, Raschen Josef wrote:
>>> Hi,
>>>
>>> Reading a kernel image from an SD card via the fatload command on the
>>> MinnowBoard Turbot seem
Hello Tom,
Am 20.10.2016 um 21:26 schrieb Tom Rini:
We currently will always see a number of warnings due to device tree
issues. These (and other warnings) should not make the build be marked
as failure so catch exit status 129 specifically and return 0 in that
case.
Cc: Heiko Schocher
Signed
Hello Tom,
Am 20.10.2016 um 21:26 schrieb Tom Rini:
Currently we fail to fetch the dtc.git tree due to an SSL issue within
the travis-ci environment. The easiest fix here is to switch to a git
URI.
Signed-off-by: Tom Rini
---
.travis.yml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-
Hello Tom,
Am 20.10.2016 um 21:26 schrieb Tom Rini:
In order to make other various improvements, update to the latest
environment travis-ci supports.
Signed-off-by: Tom Rini
---
.travis.yml | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
Reviewed-by: Heiko Schocher
bye,
Heiko
Hi Simon
On Thu, 2016-10-20 at 13:06 -0600, Simon Glass wrote:
> Only three serial drivers remain to be converted. This series drops
> two of those, since the boards appear to be unmaintained.
>
> With this, only blackfin remains.
>
> The blackfin driver probably needs to be converted as there i
On 20/10/2016 19:07, Sam Protsenko wrote:
> Hi guys,
>
> I'd like to make two changes on how raw MMC address and size of U-Boot
> are represented. But I think it's better to discuss it first, so we
> are on the same page about it.
>
> Basically I want to review two config options here.
>
> 1.
Hello Masahiro-san,
On Fri, 2016-10-21 at 10:58 +0900, Masahiro Yamada wrote:
> Hi Alexey,
>
> 2016-10-20 20:55 GMT+09:00 Alexey Brodkin :
> >
> > Hello Masahiro-san,
> >
> > On Thu, 2016-10-20 at 09:15 +0900, Masahiro Yamada wrote:
> > >
> > > Commit e2f88dfd2d96 ("libfdt: Introduce new ARCH_
48 matches
Mail list logo