Hello Stephen,
Am 26.10.2016 um 21:05 schrieb Stephen Warren:
From: Stephen Warren
ARMv7 Tegra boards aren't currently covered by any other travis-ci jobs.
Add a new job to build them.
Signed-off-by: Stephen Warren
---
.travis.yml | 2 ++
1 file changed, 2 insertions(+)
Reviewed-by: Hei
Hello Stephen,
Am 26.10.2016 um 19:05 schrieb Stephen Warren:
From: Stephen Warren
Use buildman to compile any U-Boot binary tested by test/py. This
re-uses all the work done elsewhere to make buildman work within
Travis-CI, in particular related to toolchain downloading and buildman
config fi
Hello Stephen,
Am 26.10.2016 um 19:05 schrieb Stephen Warren:
From: Stephen Warren
Invoking exit prevents any subsequent build commands from running, and
future patches will add extra commands.
Signed-off-by: Stephen Warren
---
.travis.yml | 4 +---
1 file changed, 1 insertion(+), 3 delet
Hello Stephen,
Am 26.10.2016 um 19:05 schrieb Stephen Warren:
From: Stephen Warren
This places build results into a board-specific directory rather than a
buildman-thread-specific directory. This is required so that we can
access the directory from test.py, and there's no risk of a particular
Hello Stephen,
Am 26.10.2016 um 19:05 schrieb Stephen Warren:
From: Stephen Warren
Any time an x86 toolchain is used, we need to edit ~/.buildman to
reference it. Move the editing logic into a central place so that it
doesn't have to be duplicated everywhere that uses the x86 toolchain;
future
Hello Stephen,
Am 26.10.2016 um 19:05 schrieb Stephen Warren:
From: Stephen Warren
The phrase "if [ $? -ne 0 ]; then exit $?; fi" doesn't work correctly;
by the time the "exit" statement runs, $? has already been over-written
by the result of the [ command. Fix this by explicitly storing $? an
Hello Stephen,
Am 26.10.2016 um 19:05 schrieb Stephen Warren:
From: Stephen Warren
Travis CI seems to be confused when there's a colon in an echo command,
and this is currently worked around using a variable that contains the
text we want to echo. Use = syntax instead so that we can remove the
Hello Zakir Ahmed,
Am 26.10.2016 um 12:22 schrieb Zakir Ahmed:
Hi,
We are using u-boot source code which has the support for most of the
compressions like bz2, lzma, gz etc.
We tried uncompressing bz2, lzma and gz images and most of them either fail
or data abort or hang indefinitely for l
On Wednesday 26 October 2016 10:01 PM, Simon Glass wrote:
Hi Keerthy,
On 26 October 2016 at 01:12, Keerthy wrote:
Currently the specific set ops functions are directly
called without any check for min/max current limits for a regulator.
Check for them and proceed.
Signed-off-by: Keerthy
--
York,
Yes I am going to send an update, one patch needs to be reordered as
I've mentioned.
I didn't get other feedback.
But one thing I'm wondering is how to introduce the CONFIG_ options
well, Tom's concerns make sense, and I had my explain too, we need a
final solution before I send out a v2.
On
On 10/27/2016 01:31 AM, Simon Glass wrote:
> On 23 October 2016 at 23:08, Jaehoon Chung wrote:
>> To use the CONFIG_BLK/CONFIG_DM_MMC/CONFIG_DM_MMC_OPS, add the
>> configurations for exynos4 series.(by default)
>>
>> Signed-off-by: Jaehoon Chung
>> ---
>> configs/odroid_defconfig | 3 +++
>> c
On 10/27/2016 01:31 AM, Simon Glass wrote:
> On 23 October 2016 at 23:08, Jaehoon Chung wrote:
>> Changed the compatible from generic thing to meaning compatible.
>> "samsung,exynos-mmc" should be removed.
>>
>> Signed-off-by: Jaehoon Chung
>> ---
>> arch/arm/dts/exynos4.dtsi | 25 ++
On 10/27/2016 01:31 AM, Simon Glass wrote:
> On 23 October 2016 at 23:08, Jaehoon Chung wrote:
>> Didn't overwrite the node. Just reuse the parent node.
>> And add the Exynos Series specific properties.
>>
>> Signed-off-by: Jaehoon Chung
>> ---
>> arch/arm/dts/exynos4210-origen.dts | 24
On 10/27/2016 01:31 AM, Simon Glass wrote:
> On 23 October 2016 at 23:08, Jaehoon Chung wrote:
>> mshc_0 node should be overwriten the defined node in exynos4.dtsi.
>
> I think you mean 'The mshc_0 node overwrites the defined node...'
>
>> It's meaningless. So removed this node. Instead, use the
On 10/25/2016 08:04 AM, Tom Rini wrote:
> On Mon, Oct 24, 2016 at 03:08:53PM +0900, Jaehoon Chung wrote:
>
>> Fixed the minor things.
>> 1. Removed '`' thing in comments
>> 2. Fix the wrong interrupts value from 77 to 131
>>
>> Signed-off-by: Jaehoon Chung
>> ---
>> arch/arm/dts/exynos4x12.dtsi
From: Stefan Agner
Commit 35c204d8a9d0 ("nand: reinstate lazy bad block scanning")
introduced lazy BBT scanning. However, some controller do parts
of the initialization (mxs_nand.c) during scan_bbt, hence for
those controllers the BBT must be scanned at initialization time.
In most situation the
Hi,
On Wed, Oct 26, 2016 at 02:10:32PM +0200, Antoine Tenart wrote:
> The sun5i SoCs can take advantage of the newly introduce PSCI suspend
> function. Add defines used by the PSCI code.
>
> Signed-off-by: Antoine Tenart
> ---
> include/configs/sun5i.h | 3 +++
> 1 file changed, 3 insertions(+)
Hi,
On Wed, Oct 26, 2016 at 02:10:31PM +0200, Antoine Tenart wrote:
> Add the suspend psci function for sun5i and sun7i. Thus function
> switches the cpu clk source to osc24M or to losc depending on the
> SoC family.
>
> Signed-off-by: Antoine Tenart
> ---
> arch/arm/cpu/armv7/sunxi/Makefile
On Wed, Oct 26, 2016 at 01:19:11PM -0600, Simon Glass wrote:
> The allocated memory should be freed. Fix it.
>
> Signed-off-by: Simon Glass
> Reported-by: Coverity (CID: 150963)
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: Digital signature
__
On Wed, Oct 26, 2016 at 01:19:12PM -0600, Simon Glass wrote:
> Coverity complains that this can overflow. If we later increase the size
> of one of the strings in the table, it could happen.
>
> Adjust the code to protect against this.
>
> Signed-off-by: Simon Glass
> Reported-by: Coverity (CID:
On 10/26/2016 02:00 PM, Stephen Warren wrote:
> On 10/26/2016 02:29 PM, york sun wrote:
>> On 10/26/2016 01:12 PM, Stephen Warren wrote:
>>> On 10/26/2016 01:54 PM, york sun wrote:
On 10/26/2016 12:47 PM, Stephen Warren wrote:
>
> There are two data structures in ARM U-Boot that descri
On 10/26/2016 12:54 PM, Hamish Martin wrote:
>
> On 10/27/2016 05:33 AM, york sun wrote:
>> On 10/21/2016 04:37 PM, york sun wrote:
>>> On 10/18/2016 07:48 PM, Hamish Martin wrote:
This erratum is already implemented for other ARM based QorIQ
platforms with the Gen4 DDR controller. Port t
On 10/24/2016 01:48 PM, Darwin Dingel wrote:
> +#define CONFIG_SYS_FSL_ERRATUM_A007907
Sorry I cannot merge this patch now. This new macro is rejected by
recent enforcement of using Kconfig. I will hold this in my queue and
change it to Kconfig when I finish converting these macros.
York
__
On 10/26/2016 03:15 PM, Tom Rini wrote:
Add 'PCI' as a menu option and migrate all existing users.
Signed-off-by: Tom Rini
---
Changes in v2:
- Per Stephen's comments, only a handful of Tegra configs have PCI so
move all of that logic to the config files directly rather than have
it in arch
Add 'PCI' as a menu option and migrate all existing users.
Signed-off-by: Tom Rini
---
Changes in v2:
- Per Stephen's comments, only a handful of Tegra configs have PCI so
move all of that logic to the config files directly rather than have
it in arch/arm/mach-tegra/Kconfig
---
arch/arm/mach
On 10/26/2016 12:54 PM, york@nxp.com wrote:
> On 10/26/2016 12:47 PM, Stephen Warren wrote:
>>
>> There are two data structures in ARM U-Boot that describe memory layout:
>>
>> 1) A list of RAM memory regions. U-Boot uses these to know where to
>> relocate itself to (it relocates itself to the
On 10/26/2016 02:29 PM, york sun wrote:
On 10/26/2016 01:12 PM, Stephen Warren wrote:
On 10/26/2016 01:54 PM, york sun wrote:
On 10/26/2016 12:47 PM, Stephen Warren wrote:
There are two data structures in ARM U-Boot that describe memory layout:
1) A list of RAM memory regions. U-Boot uses th
On Wed, Oct 26, 2016 at 11:11:31AM -0600, Stephen Warren wrote:
> On 10/24/2016 02:13 PM, Tom Rini wrote:
> >Add 'PCI' as a menu option and migrate all existing users.
> >
> >Signed-off-by: Tom Rini
> >---
> >Tegra is in a funny spot here. TEGRA_COMMON will select DM_PCI and
> >DM_PCICOMPAT. But
On 26/10/16 19:51, Jagan Teki wrote:
Hi,
> On Fri, Oct 21, 2016 at 5:41 AM, Andre Przywara
> wrote:
>> The sun8i-emac driver works fine with the A64 Ethernet IP, but we are
>> missing an alias entry to trigger the driver instantiation by U-Boot.
>> Add the line to point U-Boot to the Ethernet DT
On 10/18/2016 12:18 AM, Hongbo Zhang wrote:
> Ping all,
> Some time ago I saw several people mentioned ARMv8 PSCI, are you
> interested in leaving your review comments?
> I know it is not so easy for reviewing assembly language patches, but
> code structures and assembly instructions in this patch
On 10/26/2016 01:12 PM, Stephen Warren wrote:
> On 10/26/2016 01:54 PM, york sun wrote:
>> On 10/26/2016 12:47 PM, Stephen Warren wrote:
>>>
>>> There are two data structures in ARM U-Boot that describe memory layout:
>>>
>>> 1) A list of RAM memory regions. U-Boot uses these to know where to
>>> r
On 10/26/2016 01:54 PM, york sun wrote:
On 10/26/2016 12:47 PM, Stephen Warren wrote:
There are two data structures in ARM U-Boot that describe memory layout:
1) A list of RAM memory regions. U-Boot uses these to know where to
relocate itself to (it relocates itself to the top of RAM at boot),
On 10/27/2016 05:33 AM, york sun wrote:
> On 10/21/2016 04:37 PM, york sun wrote:
>> On 10/18/2016 07:48 PM, Hamish Martin wrote:
>>> This erratum is already implemented for other ARM based QorIQ
>>> platforms with the Gen4 DDR controller. Port the fix to the Gen3
>>> controller and enable it for
On 10/26/2016 12:47 PM, Stephen Warren wrote:
>
> There are two data structures in ARM U-Boot that describe memory layout:
>
> 1) A list of RAM memory regions. U-Boot uses these to know where to
> relocate itself to (it relocates itself to the top of RAM at boot), and
> to fill in the /memory node
On 10/24/2016 04:59 AM, Mark Rutland wrote:
On Fri, Oct 21, 2016 at 07:31:52PM +, york sun wrote:
On 10/20/2016 01:34 PM, Stephen Warren wrote:
On 10/19/2016 11:06 PM, york sun wrote:
I understand the data in dirty cache is not lost when the dcache is
disabled. It is just not accessible. I
On 10/24/2016 04:44 AM, Mark Rutland wrote:
Hi,
Sorry for joining this a bit late; apologies if the below re-treads
ground already covered.
On Wed, Oct 19, 2016 at 09:25:02AM -0600, Stephen Warren wrote:
On 10/14/2016 02:17 PM, York Sun wrote:
Current code turns off d-cache first, then flush
Coverity complains that this can overflow. If we later increase the size
of one of the strings in the table, it could happen.
Adjust the code to protect against this.
Signed-off-by: Simon Glass
Reported-by: Coverity (CID: 150964)
---
common/image.c | 3 ++-
1 file changed, 2 insertions(+), 1 d
The allocated memory should be freed. Fix it.
Signed-off-by: Simon Glass
Reported-by: Coverity (CID: 150963)
---
tools/mkimage.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/mkimage.c b/tools/mkimage.c
index 3c594a0..521fa80 100644
--- a/tools/mkimage.c
+++ b/tools/mkimage.c
@@ -64
Hi Andreas,
On 26 October 2016 at 09:02, Andreas Färber wrote:
> On a Raspberry Pi 2 disagreements on cell endianness can be observed:
>
> U-Boot> fdt print /soc/gpio@7e20 phandle
> phandle = <0x000d>
> U-Boot> fdt get value myvar /soc/gpio@7e20 phandle; printenv myvar
> myvar
On 26 October 2016 at 09:14, Andreas Färber wrote:
> Let get_maintainers.pl pick up the new cmd/fdt.c.
>
> Cc: Simon Glass
> Signed-off-by: Andreas Färber
> ---
> MAINTAINERS | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Reviewed-by: Simon Glass
_
On Wed, Oct 26, 2016 at 01:05:52PM -0600, Stephen Warren wrote:
> From: Stephen Warren
>
> ARMv7 Tegra boards aren't currently covered by any other travis-ci jobs.
> Add a new job to build them.
>
> Signed-off-by: Stephen Warren
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: Dig
From: Stephen Warren
ARMv7 Tegra boards aren't currently covered by any other travis-ci jobs.
Add a new job to build them.
Signed-off-by: Stephen Warren
---
.travis.yml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/.travis.yml b/.travis.yml
index 5de0601c4fbf..cda2d979ee4a 100644
--- a
On 10/26/2016 12:59 PM, Tom Rini wrote:
On Wed, Oct 26, 2016 at 11:05:36AM -0600, Stephen Warren wrote:
From: Stephen Warren
Use buildman to compile any U-Boot binary tested by test/py. This
re-uses all the work done elsewhere to make buildman work within
Travis-CI, in particular related to t
On Wed, Oct 26, 2016 at 11:05:36AM -0600, Stephen Warren wrote:
> From: Stephen Warren
>
> Use buildman to compile any U-Boot binary tested by test/py. This
> re-uses all the work done elsewhere to make buildman work within
> Travis-CI, in particular related to toolchain downloading and buildman
On 10/26/2016 11:05 AM, Stephen Warren wrote:
From: Stephen Warren
Use buildman to compile any U-Boot binary tested by test/py. This
re-uses all the work done elsewhere to make buildman work within
Travis-CI, in particular related to toolchain downloading and buildman
config file creation.
d
On Fri, Oct 21, 2016 at 5:41 AM, Andre Przywara wrote:
> The sun8i-emac driver works fine with the A64 Ethernet IP, but we are
> missing an alias entry to trigger the driver instantiation by U-Boot.
> Add the line to point U-Boot to the Ethernet DT node.
> This enables TFTP boot on the Pine64.
>
>
On Wed, Oct 26, 2016 at 1:14 PM, Hans de Goede wrote:
> Hi,
>
>
> On 26-10-16 09:00, Jagan Teki wrote:
>>
>> On Tue, Oct 25, 2016 at 3:59 AM, André Przywara
>> wrote:
>>>
>>> On 21/10/16 11:28, Hans de Goede wrote:
Hi,
On 21-10-16 12:06, Andre Przywara wrote:
>
> Hi,
>
On Wed, Oct 26, 2016 at 10:46 PM, Markus Niebel wrote:
> Hello
>
> Am Montag, den 24.10.2016, 17:27 +0530 schrieb Jagan Teki:
>> From: Jagan Teki
>>
>> Added kconfig for FEC_MXC driver.
>>
>> Cc: Joe Hershberger
>> Cc: Simon Glass
>> Cc: Fabio Estevam
>> Cc: Stefano Babic
>> Cc: Peng Fan
>>
On Wed, 2016-10-26 at 10:01 -0400, Roy Pledge wrote:
> Add support for device tree fixup for the DPAA1 QBMan nodes in ARM platforms
>
> Signed-off-by: Roy Pledge
> ---
> arch/arm/cpu/armv8/fsl-layerscape/fdt.c| 89
>
> .../arm/cpu/armv8/fsl-layerscape/fsl_lsch2
Hello
Am Montag, den 24.10.2016, 17:27 +0530 schrieb Jagan Teki:
> From: Jagan Teki
>
> Added kconfig for FEC_MXC driver.
>
> Cc: Joe Hershberger
> Cc: Simon Glass
> Cc: Fabio Estevam
> Cc: Stefano Babic
> Cc: Peng Fan
> Cc: Matteo Lisi
> Cc: Michael Trimarchi
> Signed-off-by: Jagan Teki
On Wed, Oct 26, 2016 at 9:18 PM, Bacrau, Dumitru
wrote:
> Hello Teki,
>
> The device that I have used is MT25QU02GCBB8E12-0SIT, with the datasheet
> available here:
> https://www.micron.com/~/media/documents/products/data-sheet/nor-flash/serial-nor/mt25q/die-rev-b/mt25q_qlkt_u_02g_cbb_0.pdf.
Th
On Wed, Oct 26, 2016 at 10:44 PM, Markus Niebel wrote:
> Hello
>
> Am Montag, den 24.10.2016, 17:27 +0530 schrieb Jagan Teki:
>> From: Jagan Teki
>>
>> Added kconfig for MXC_UART driver.
>>
>> Cc: Simon Glass
>> Cc: Fabio Estevam
>> Cc: Stefano Babic
>> Cc: Peng Fan
>> Cc: Matteo Lisi
>> Cc:
On 09/26/2016 11:36 PM, shh@gmail.com wrote:
> From: Shaohui Xie
>
> LPUART0 is used by default, and it's using platform clock, if a different
> clock is preferred, user can define CONFIG_LPUART_CLK.
Shaohui,
You may have to choose another name for macro CONFIG_LPUART_CLK. We need
to avoid
Hello
Am Montag, den 24.10.2016, 17:27 +0530 schrieb Jagan Teki:
> From: Jagan Teki
>
> Added kconfig for MXC_UART driver.
>
> Cc: Simon Glass
> Cc: Fabio Estevam
> Cc: Stefano Babic
> Cc: Peng Fan
> Cc: Matteo Lisi
> Cc: Michael Trimarchi
> Signed-off-by: Jagan Teki
> ---
> drivers/ser
Hello Teki,
The device that I have used is MT25QU02GCBB8E12-0SIT, with the datasheet
available here:
https://www.micron.com/~/media/documents/products/data-sheet/nor-flash/serial-nor/mt25q/die-rev-b/mt25q_qlkt_u_02g_cbb_0.pdf.
Thanks a lot,
Radu
-Original Message-
From: Jagan Teki [m
Add Queue Manager and Buffer Manager support for NXP Layerscape devices
based on DPAA1. This includes LS1043A and LS1046A devices.
Roy Pledge (1):
fsl_qman: Implement device tree fixup for QBMan on ARM processors
arch/arm/cpu/armv8/fsl-layerscape/fdt.c| 89
.
Rajat,
On 08/04/2016 02:42 AM, Marek Vasut wrote:
> On 08/04/2016 11:26 AM, Rajat Srivastava wrote:
>
> You can use clrsetbits_le32() or such if this is not direct port from Linux.
>
>
> Parens around number are not necessary, please remove.
>
Are you going to update your patch?
York
__
On Wed, Oct 26, 2016 at 11:11:31AM -0600, Stephen Warren wrote:
> On 10/24/2016 02:13 PM, Tom Rini wrote:
> >Add 'PCI' as a menu option and migrate all existing users.
> >
> >Signed-off-by: Tom Rini
> >---
> >Tegra is in a funny spot here. TEGRA_COMMON will select DM_PCI and
> >DM_PCICOMPAT. But
On 10/24/2016 02:13 PM, Tom Rini wrote:
Add 'PCI' as a menu option and migrate all existing users.
Signed-off-by: Tom Rini
---
Tegra is in a funny spot here. TEGRA_COMMON will select DM_PCI and
DM_PCICOMPAT. But adding PCI to the list here results in the following:
aarch64: (for 61/61 boar
From: Stephen Warren
Use buildman to compile any U-Boot binary tested by test/py. This
re-uses all the work done elsewhere to make buildman work within
Travis-CI, in particular related to toolchain downloading and buildman
config file creation.
Signed-off-by: Stephen Warren
---
.travis.yml | 8
From: Stephen Warren
The phrase "if [ $? -ne 0 ]; then exit $?; fi" doesn't work correctly;
by the time the "exit" statement runs, $? has already been over-written
by the result of the [ command. Fix this by explicitly storing $? and
then using that stored value in both the test and the error-cas
From: Stephen Warren
This places build results into a board-specific directory rather than a
buildman-thread-specific directory. This is required so that we can
access the directory from test.py, and there's no risk of a particular
build's results being over-written by another build performed by
From: Stephen Warren
Invoking exit prevents any subsequent build commands from running, and
future patches will add extra commands.
Signed-off-by: Stephen Warren
---
.travis.yml | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/.travis.yml b/.travis.yml
index 6e72e0bb233f.
From: Stephen Warren
Any time an x86 toolchain is used, we need to edit ~/.buildman to
reference it. Move the editing logic into a central place so that it
doesn't have to be duplicated everywhere that uses the x86 toolchain;
future patches will add additional cases where it's used.
It would be
From: Stephen Warren
Travis CI seems to be confused when there's a colon in an echo command,
and this is currently worked around using a variable that contains the
text we want to echo. Use = syntax instead so that we can remove the
work-around; it's rather confusing until you find out what it's
On 10/24/2016 02:16 PM, york@nxp.com wrote:
>> +
>> +#ifdef CONFIG_SYS_FSL_ERRATUM_A007907
>> +flush_dcache();
>> +mtspr(L1CSR2, (mfspr(L1CSR2) & ~L1CSR2_DCSTASHID));
>> +sync();
>> +#endif
>> +
>
> My erratum document shows a second step is to insert sync instruction
> before each
On 10/07/2016 11:56 PM, Alison Wang wrote:
> To support loading a 32-bit OS, the execution state will change from
> AArch64 to AArch32 when jumping to kernel.
>
> The architecture information will be got through checking FIT image,
> then U-Boot will load 32-bit OS or 64-bit OS automatically.
>
> S
On 10/24/2016 09:30 PM, Calvin Johnson wrote:
I wonder why we don't see ECC errors before this patch. We have
LS1043A boots on NAND, SD.
>>>
>>> OCRAM has a requirement of initializing before first time "read".
>>> If user reads OCRAM before **initializing**; ECC error will come. (
On Wed, Oct 26, 2016 at 8:38 PM, Stefano Babic wrote:
> Hi Jagan,
>
>
> On 25/10/2016 08:23, Jagan Teki wrote:
>> From: Jagan Teki
>>
>> Add NAND support for Engicam i.CoreM6 qdl board.
>>
>> Boot Log:
>>
>>
>> U-Boot SPL 2016.09-rc2-30755-gd3dc581-dirty (Sep 28 2016 - 23:00:43)
>> Tryin
On 10/26/2016 03:39 AM, Wenbin Song wrote:
>>> +
>>> +ENTRY(smp_kick_all_cpus)
>>> + /* Kick secondary cpus up by SGI 0 interrupt */
>>> + mov x29, lr /* Save LR */
>>> + bl fix_gic_offset
>>> + bl gic_kick_secondary_cpus
>>> + mov lr, x29
On 10/21/2016 04:37 PM, york sun wrote:
> On 10/18/2016 07:48 PM, Hamish Martin wrote:
>> This erratum is already implemented for other ARM based QorIQ
>> platforms with the Gen4 DDR controller. Port the fix to the Gen3
>> controller and enable it for T2080 and T2081.
>>
>> Reviewed-by: Chris Packh
Hi Tom,
On 24 October 2016 at 13:13, Tom Rini wrote:
> Add 'PCI' as a menu option and migrate all existing users.
>
> Signed-off-by: Tom Rini
> ---
> Tegra is in a funny spot here. TEGRA_COMMON will select DM_PCI and
> DM_PCICOMPAT. But adding PCI to the list here results in the following:
>
Hi Keerthy,
On 26 October 2016 at 01:12, Keerthy wrote:
> Currently the specific set ops functions are directly
> called without any check for min/max current limits for a regulator.
> Check for them and proceed.
>
> Signed-off-by: Keerthy
> ---
> drivers/power/regulator/regulator-uclass.c | 5
On 23 October 2016 at 20:45, Vagrant Cascadian wrote:
> Signed-off-by: Vagrant Cascadian
> ---
>
> board/sysam/amcore/amcore.c | 2 +-
> tools/mkimage.c | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
Reviewed-by: Simon Glass
_
On 26 October 2016 at 01:12, Keerthy wrote:
> Currently the specific set ops functions are directly
> called without any check for voltage limits for a regulator.
> Check for them and proceed.
>
> Signed-off-by: Keerthy
> ---
> drivers/power/regulator/regulator-uclass.c | 5 +
> 1 file chang
On 26 October 2016 at 01:12, Keerthy wrote:
> In case we want to force a particular value on a regulator
> irrespective of the min/max constraints for testing purposes
> one can call regulator_set_value_force function.
>
> Signed-off-by: Keerthy
> ---
> cmd/regulator.c
On 23 October 2016 at 23:08, Jaehoon Chung wrote:
> To use the CONFIG_BLK/CONFIG_DM_MMC/CONFIG_DM_MMC_OPS, add the
> configurations for exynos4 series.(by default)
>
> Signed-off-by: Jaehoon Chung
> ---
> configs/odroid_defconfig | 3 +++
> configs/origen_defconfig | 3 +++
> configs/smdkv31
On 23 October 2016 at 20:45, Vagrant Cascadian wrote:
> Cover-Letter: Fixes several spelling errors for the words "resetting",
> "extended", "occur", and "multiple".
>
> Signed-off-by: Vagrant Cascadian
> ---
>
> arch/arm/mach-exynos/dmc_init_ddr3.c| 2 +-
> arch/arm/mach-socfpga/misc.c
On 23 October 2016 at 23:08, Jaehoon Chung wrote:
> Changed the compatible from generic thing to meaning compatible.
> "samsung,exynos-mmc" should be removed.
>
> Signed-off-by: Jaehoon Chung
> ---
> arch/arm/dts/exynos4.dtsi | 25 +++--
> 1 file changed, 15 insertions(+), 10
On 23 October 2016 at 23:08, Jaehoon Chung wrote:
> Didn't overwrite the node. Just reuse the parent node.
> And add the Exynos Series specific properties.
>
> Signed-off-by: Jaehoon Chung
> ---
> arch/arm/dts/exynos4210-origen.dts | 24 -
> arch/arm/dts/exynos4210-trats.dts
On 23 October 2016 at 23:08, Jaehoon Chung wrote:
> mshc_0 node should be overwriten the defined node in exynos4.dtsi.
I think you mean 'The mshc_0 node overwrites the defined node...'
> It's meaningless. So removed this node. Instead, use the node in exynos4.dtsi.
'So remove this node'
>
> Si
On 23 October 2016 at 20:45, Vagrant Cascadian wrote:
> Signed-off-by: Vagrant Cascadian
> ---
>
> cmd/bootm.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Reviewed-by: Simon Glass
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.
On 23 October 2016 at 20:45, Vagrant Cascadian wrote:
> Signed-off-by: Vagrant Cascadian
> ---
>
> fs/ubifs/ubifs.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Reviewed-by: Simon Glass
___
U-Boot mailing list
U-Boot@lists.denx.de
http://l
Hi Tom,
On 23 October 2016 at 18:40, Tom Rini wrote:
> On Mon, Oct 17, 2016 at 08:12:33PM -0600, Simon Glass wrote:
>
>> This series moves a number of console-related CONFIG options to Kconfig.
>> Those that are not currently used are removed.
>>
>> A few unused video drivers are also removed and
Hi,
On 21 October 2016 at 01:10, Marek Vasut wrote:
> On 10/21/2016 08:52 AM, Marcel Ziswiler wrote:
>> Hi Simon
>>
>> On Thu, 2016-10-20 at 13:06 -0600, Simon Glass wrote:
>>> Only three serial drivers remain to be converted. This series drops
>>> two of those, since the boards appear to be unma
On 20 October 2016 at 20:07, Wenyou Yang wrote:
> Add the clock support.
>
> Signed-off-by: Wenyou Yang
> ---
>
> drivers/gpio/at91_gpio.c | 13 +
> 1 file changed, 13 insertions(+)
Reviewed-by: Simon Glass
___
U-Boot mailing list
U-Boot@
Hi Wenyou,
On 20 October 2016 at 20:07, Wenyou Yang wrote:
> Add the device tree support.
>
> Signed-off-by: Wenyou Yang
> ---
>
> drivers/gpio/at91_gpio.c | 15 +++
> 1 file changed, 15 insertions(+)
Reviewed-by: Simon Glass
>
> diff --git a/drivers/gpio/at91_gpio.c b/drivers/gp
On 20 October 2016 at 20:07, Wenyou Yang wrote:
> The CONFIG_AT91_GPIO option is used to select AT91 PIO GPIO driver.
>
> Signed-off-by: Wenyou Yang
> ---
>
> drivers/gpio/Kconfig | 13 +
> 1 file changed, 13 insertions(+)
Reviewed-by: Simon Glass
__
Hi,
On 19 October 2016 at 00:47, Paolo De Luca Bosso
wrote:
> Hi!
>
> Yes, i have a question about U-Boot.
>
> Can i use U-Boot as bootloader for a proprietary operating system?
Yes.
>
> I want use bootm command and a bin file. In particular the Image kernel is
> produced by mkimage command wit
Hi Felix,
On 19 October 2016 at 04:12, Felix Brack wrote:
> This patch adds support for the PDU001 board.
>
> Signed-off-by: Felix Brack
> ---
>
> arch/arm/Kconfig | 1 +
> arch/arm/cpu/armv7/am33xx/Kconfig | 9 ++
> board/eets/pdu001/Kconfig | 66 ++
> boa
Hi,
Am 26.10.2016 um 22:17 schrieb Sumit Garg:
> The patch-set does the following:
>
> 1. Add NOR secure boot target on ls1046aqds platform.
> 2. Add QSPI secure boot target on ls1046ardb platform.
Please double-check your clock, you are posting in the future.
Regards,
Andreas
--
SUSE Linux G
Let get_maintainers.pl pick up the new cmd/fdt.c.
Cc: Simon Glass
Signed-off-by: Andreas Färber
---
MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 8e67202..3d18f28 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -273,7 +273,7 @@ F:
On a Raspberry Pi 2 disagreements on cell endianness can be observed:
U-Boot> fdt print /soc/gpio@7e20 phandle
phandle = <0x000d>
U-Boot> fdt get value myvar /soc/gpio@7e20 phandle; printenv myvar
myvar=0x0D00
Fix this by always treating the pointer as __be32 and convertin
Add support for device tree fixup for the DPAA1 QBMan nodes in ARM platforms
Signed-off-by: Roy Pledge
---
arch/arm/cpu/armv8/fsl-layerscape/fdt.c| 89
.../arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c |3 +
.../include/asm/arch-fsl-layerscape/immap_lsch2.
Hi,
On Wed, Oct 26, 2016 at 02:10:24PM +0200, Antoine Tenart wrote:
> Implement three atomic functions to allow making an atomic operation
> that returns the value. Adds: atomic_add_return(), atomic_sub_return(),
> atomic_inc_return() and atomic_dec_return().
>
> Signed-off-by: Antoine Tenart
I
Hi Jagan,
On 25/10/2016 08:23, Jagan Teki wrote:
> From: Jagan Teki
>
> Add NAND support for Engicam i.CoreM6 qdl board.
>
> Boot Log:
>
>
> U-Boot SPL 2016.09-rc2-30755-gd3dc581-dirty (Sep 28 2016 - 23:00:43)
> Trying to boot from NAND
> NAND : 512 MiB
>
> U-Boot 2016.09-rc2-30755-
On 10/26/2016 08:59 AM, Antoine Tenart wrote:
Hello,
On Wed, Oct 26, 2016 at 08:55:27AM -0600, Stephen Warren wrote:
On 10/26/2016 06:10 AM, Antoine Tenart wrote:
Select the newly introduced ARM_GIC option to the relevant configuration
which also have a psci implementation.
This doesn't look
Hello,
On Wed, Oct 26, 2016 at 08:55:27AM -0600, Stephen Warren wrote:
> On 10/26/2016 06:10 AM, Antoine Tenart wrote:
> > Select the newly introduced ARM_GIC option to the relevant configuration
> > which also have a psci implementation.
>
> This doesn't look right; all Tegras have a GIC, so it'
On 10/26/2016 06:10 AM, Antoine Tenart wrote:
Select the newly introduced ARM_GIC option to the relevant configuration
which also have a psci implementation.
This doesn't look right; all Tegras have a GIC, so it's not a
board-specific option. Perhaps TEGRA_COMMON or TEGRA_ARMV[78]_COMMON
shou
On 25/10/2016 02:09, Peng Fan wrote:
> Hi Stefano,
> On Mon, Oct 24, 2016 at 04:05:53PM +0200, Stefano Babic wrote:
>> Hi Peng,
>>
>> On 11/10/2016 08:29, Peng Fan wrote:
>>> Add plugin support for imximage.
>>>
>>> Define CONFIG_USE_IMXIMG_PLUGIN in defconfig to enable using plugin.
>>>
>>> Signed
1 - 100 of 158 matches
Mail list logo
