Hi,
On 6.1.2017 08:09, Kever Yang wrote:
> Hi Michal,
>
> Thanks for your comments.
>
> On 01/02/2017 11:05 PM, Michal Simek wrote:
>> On 29.12.2016 11:25, Kever Yang wrote:
>>> ATF(ARM Trust Firmware) is used by ARM arch64 SoCs, find more infomation
>>> about ATF at:
>>>
>>> SPL is consider
Hi Michal,
On 01/02/2017 11:05 PM, Michal Simek wrote:
Hi,
separation of rk3399 SPL from ATF SPL would be worth.
Thanks for your comment, this may help my rk3399 SPL patches get accept
faster.
I will do it after people get back from holiday and send me other comments.
Thanks,
- Kever
Tha
Hi Michal,
Thanks for your comments.
On 01/02/2017 11:05 PM, Michal Simek wrote:
On 29.12.2016 11:25, Kever Yang wrote:
ATF(ARM Trust Firmware) is used by ARM arch64 SoCs, find more infomation
about ATF at:
SPL is consider as BL2 in ATF, it needs to load other part of ATF binary
SPL repl
Add QSPI Secure Boot target. Also enable sec init.
Signed-off-by: Vinitha Pillai
Signed-off-by: Sumit Garg
---
Changes in v3:
Changes in comment style.
Changes in v2:
Split patches logically from 2 to 3.
board/freescale/ls1046ardb/MAINTAINERS| 4
board/freescale/ls1046ardb/ls10
The patch-set does the following:
1. Add NOR secure boot target on ls1046aqds platform.
2. Add QSPI secure boot target on ls1046ardb platform.
Changes in v3:
Changes in comment style.
Changes in v2:
Split patches logically from 2 to 3.
Sumit Garg (3):
SECURE_BOOT: Enable chain of trust on LS1
Define bootscript and its header addresses for QSPI target. Also
define PPA header address to enable PPA validation.
Signed-off-by: Vinitha Pillai
Signed-off-by: Sumit Garg
---
Changes in v3:
Changes in comment style.
Changes in v2:
Split patches logically from 2 to 3.
arch/arm/include/asm/a
Add NOR secure boot target. Also enable sec init.
Signed-off-by: Vinitha Pillai
Signed-off-by: Sumit Garg
---
Changes in v3:
Changes in comment style.
Changes in v2:
Split patches logically from 2 to 3.
board/freescale/ls1046aqds/MAINTAINERS | 4
board/freescale/ls1046aqds/ls1046aqds
On 01/05/2017 06:19 PM, Marek Vasut wrote:
> On 01/06/2017 03:13 AM, Tony O'Brien wrote:
>> Hi -
>>
>>
>> We recently updated our U-Boot release to v2016.11 and now our USB devices
>> don't work. When usb start is executed with a device inserted it hangs at
>> 'scanning bus 0 for devices...' and
To remove the SoCs options such as SAMA5D2, SAMA5D3 and SAMA5D4
from CONFIG_SYS_EXTRA_OPTIONS which is deprecated. Add these SoC
configs to Kconfig.
Signed-off-by: Wenyou Yang
---
arch/arm/mach-at91/Kconfig | 28
1 file changed, 20 insertions(+), 8 deletions(-)
dif
The CONFIG_SYS_EXTRA_OPTIONS is deprecated, and the SoC options
such as SAMA5D2, SAMA5D3 and SAMA5D4 are defined as config
in Kconfig, update the defconfig file, remove these options.
Signed-off-by: Wenyou Yang
---
configs/ma5d4evk_defconfig | 1 -
configs/sama5d2_ptc_nandfla
As said in READRE.kconfig, include/configs/*.h will be removed
after all options are switched to Kconfig.
As the first step, remove the follow line from
include/configs/at91-sama5_common.h.
#include
Signed-off-by: Wenyou Yang
---
arch/arm/mach-at91/atmel_sfr.c | 1 +
arch/arm/mach-at91
The CONFIG_SYS_EXTRA_OPTIONS is deprecated, remove the SoC
options such as SAMA5D2, SAMA5D3 and SAMA5D4 from
CONFIG_SYS_EXTRA_OPTIONS.
Wenyou Yang (4):
ARM: at91: move CONFIG_AT91FAMILY option to Kconfig
ARM: at91: sama5: remove hardware.h included in board config
ARM: at91: sama5: add SoC
Move CONFIG_AT91FAMILY option from include/mach/.h to Kconfig.
Signed-off-by: Wenyou Yang
---
arch/arm/mach-at91/Kconfig| 3 +++
arch/arm/mach-at91/include/mach/at91rm9200.h | 1 -
arch/arm/mach-at91/include/mach/at91sam9260.h | 5 -
arch/arm/mach-at91/include/mach/at91
To fix the build error when building for at91sam9261ek, move
PIO_SCDR_DIV definition to mach/at91_pio.h.
---8<---
error: 'PIO_SCDR_DIV' undeclared (first use in this function)
--->8---
Signed-off-by: Wenyou Yang
---
arch/arm/mach-at91/include/mach/at91_pio.h | 2 ++
arch/arm/mach-at91/include
+Prabhakar
Prabhakar,
Please include USB IP owner to take a look.
On 01/05/2017 08:27 PM, Marek Vasut wrote:
> On 01/06/2017 03:40 AM, york sun wrote:
>> On 01/05/2017 06:19 PM, Marek Vasut wrote:
>>> On 01/06/2017 03:13 AM, Tony O'Brien wrote:
Hi -
We recently updated our U-
Add secure boot validation of MC, DPC images using
esbc_validate command.
Signed-off-by: Sumit Garg
Signed-off-by: Udit Agarwal
---
Changes for V2:
Use of #ifdef instead of #ifndef with CONFIG_SECURE_BOOT macro
and coresponding changes in mcinitcmd command.
include/configs/ls2080aqds.h | 21 +
Update bootscript and its hdr addresses for Layerscape Chasis 3
based platforms instead of individual SoCs.
Signed-off-by: Sumit Garg
Signed-off-by: Udit Agarwal
---
Changes for V2:
Modified the subject
arch/arm/include/asm/fsl_secure_boot.h | 12 ++--
1 file changed, 6 insertions(+),
On 01/06/2017 03:40 AM, york sun wrote:
> On 01/05/2017 06:19 PM, Marek Vasut wrote:
>> On 01/06/2017 03:13 AM, Tony O'Brien wrote:
>>> Hi -
>>>
>>>
>>> We recently updated our U-Boot release to v2016.11 and now our USB devices
>>> don't work. When usb start is executed with a device inserted it
On 01/06/2017 03:13 AM, Tony O'Brien wrote:
> Hi -
>
>
> We recently updated our U-Boot release to v2016.11 and now our USB devices
> don't work. When usb start is executed with a device inserted it hangs at
> 'scanning bus 0 for devices...' and doesn't recover. Our product uses an NXP
> T20
> -Original Message-
> From: Jagan Teki [mailto:ja...@openedev.com]
> Sent: Thursday, January 05, 2017 10:33 PM
> To: tr...@konsulko.com
> Cc: u-boot@lists.denx.de; Jagan Teki ; Stefano Babic
> ; Peng Fan
> Subject: [PATCH] mx6ullevk: Add missing MAINTAINERS for
> mx6ull_14x14_evk_plugin
On 01/05/2017 11:34 PM, Tom Rini wrote:
> On Tue, Jan 03, 2017 at 10:17:18AM +0900, Jaehoon Chung wrote:
>
>> Dear Tom,
>>
>> Could you pull these patches on your master branch?
>> There is a patch relevant to PMIC for PR.
>> I considered to make the pmic branch, but just included this patch in th
On 01/01/2017 02:48 PM, Stefan Bruens wrote:
On Montag, 12. Dezember 2016 11:04:34 CET you wrote:
On 12/04/2016 05:52 PM, Stefan Brüns wrote:
From: Stefan Brüns
The following checks are currently implemented:
1. listing a directory
2. verifying size of a file
3. veryfying md5sum for a file r
On 01/03/2017 03:39 AM, Tuomas Tynkkynen wrote:
The directory structure of device tree files produced by the kernel's
'make dtbs_install' is different on ARM64, the RPi3 device tree file is
in a 'broadcom' subdirectory there. Make the set_fdtfile function account
for this so that the distro boot
From: Fabio Estevam
Commit 6e1f4d2652e79 ("arm: imx-common: add SECURE_BOOT option to
Kconfig") moved the CONFIG_SECURE_BOOT option to Kconfig, so update
the mxc_hab README file to reflect that.
Signed-off-by: Fabio Estevam
---
doc/README.mxc_hab | 5 ++---
1 file changed, 2 insertions(+), 3 d
06.01.2017, 06:16, "Maxime Ripard" :
> On Thu, Dec 29, 2016 at 02:50:48AM +0800, Icenowy Zheng wrote:
>> Allwinner SoCs after H3 (e.g. A64, H5, R40, V3s) uses a H3-like
>> DesignWare DRAM controller, which do not have official free DRAM
>> initialization code, but can use modified dram_sun8i_h
2017年1月6日 06:39于 Maxime Ripard 写道:
>
> On Thu, Dec 29, 2016 at 03:01:01AM +0800, Icenowy Zheng wrote:
> > V3s devices won't have enough memory to load U-Boot binary at
> > 0x4a00, and they do not have enough memory to reserve 64MiB for
> > malloc() (it has only 64MiB at all!)
> > Change th
2017年1月6日 06:37于 Maxime Ripard 写道:
>
> On Thu, Dec 29, 2016 at 03:00:58AM +0800, Icenowy Zheng wrote:
> > H3-like DRAM controller needs some special code to operate a DDR2 DRAM
> > chip. Add the logic to probe such a chip.
> >
> > As there's no commercial boards available now with H3 and DDR2
2017年1月6日 05:59于 Maxime Ripard 写道:
>
> On Fri, Dec 23, 2016 at 04:31:32PM +0800, Icenowy Zheng wrote:
> > The A64 uses the AXP803 as its PMIC.
> >
> > Signed-off-by: Icenowy Zheng
> > ---
> > arch/arm/mach-sunxi/Makefile | 3 +
> > arch/arm/mach-sunxi/pmic_bus.c | 6 +-
> > arch/arm
On Thu, Dec 29, 2016 at 03:00:58AM +0800, Icenowy Zheng wrote:
> H3-like DRAM controller needs some special code to operate a DDR2 DRAM
> chip. Add the logic to probe such a chip.
>
> As there's no commercial boards available now with H3 and DDR2 DRAM, the
> patch is developed and tested on a V3s
On Wed, Jan 4, 2017 at 7:26 PM, Tom Rini wrote:
> On Wed, Jan 04, 2017 at 05:18:42PM -0800, Maxim Sloyko wrote:
>> On Wed, Jan 4, 2017 at 12:58 PM, Tom Rini wrote:
>> > On Wed, Jan 04, 2017 at 11:46:49AM -0800, Maxim Sloyko wrote:
>> >
>> >> Signed-off-by: Maxim Sloyko
>> >> ---
>> >>
>> >> arc
On Thu, Dec 29, 2016 at 02:50:49AM +0800, Icenowy Zheng wrote:
> From: Andre Przywara
>
> According to Jens disabling the on-die-termination should set bit 5,
> not bit 1 in the respective register. Fix this.
>
> Reported-by: Jens Kuske
> Signed-off-by: Andre Przywara
This has already been se
On Fri, Dec 23, 2016 at 04:31:33PM +0800, Icenowy Zheng wrote:
> Pine64+ uses DLDO4 for wireless network, and DC1SW for wired network.
>
> Enable these two regulators, in order to provide net support in U-Boot
> and Linux.
>
> Signed-off-by: Icenowy Zheng
> ---
> configs/pine64_plus_defconfig |
On Fri, Dec 23, 2016 at 04:31:32PM +0800, Icenowy Zheng wrote:
> The A64 uses the AXP803 as its PMIC.
>
> Signed-off-by: Icenowy Zheng
> ---
> arch/arm/mach-sunxi/Makefile | 3 +
> arch/arm/mach-sunxi/pmic_bus.c | 6 +-
> arch/arm/mach-sunxi/rsb.c | 2 +-
> board/sunxi/board.c
On 01/04/2017 08:47 PM, Y.T. Tang wrote:
> Hi York,
>
> For chasis2 platforms, like ls1043a and ls1046a, similar patch has been
> merged already.
>
Ah! I see them in a wider range. You have them under #elif
defined(CONFIG_FSL_LSCH2). It isn't visible in this patch.
York
On 01/05/17 18:25, york sun wrote:
> On 01/05/2017 01:51 AM, Igor Grinberg wrote:
>> On 01/04/17 23:41, york sun wrote:
>>> On 12/25/2016 11:29 PM, Igor Grinberg wrote:
Hi Prabhakar Kushwaha,
On 12/26/16 08:45, Prabhakar Kushwaha wrote:
> Enable UUID and GPT partition support for
On 01/05/2017 01:51 AM, Igor Grinberg wrote:
> On 01/04/17 23:41, york sun wrote:
>> On 12/25/2016 11:29 PM, Igor Grinberg wrote:
>>> Hi Prabhakar Kushwaha,
>>>
>>> On 12/26/16 08:45, Prabhakar Kushwaha wrote:
Enable UUID and GPT partition support for NXP's ARM based SoCs
i.e. LS1012A, LS
On Tue, Jan 03, 2017 at 10:17:18AM +0900, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches on your master branch?
> There is a patch relevant to PMIC for PR.
> I considered to make the pmic branch, but just included this patch in this PR.
> (If you want to split the PR, I will do
Add 'Peng Fan' as MAINTAINERS of configs/mx6ull_14x14_evk_plugin_defconfig
which is missing in below commit
"imx: mx6ull_14x14_evk: add plugin defconfig"
(sha1: b90ebf49bb8f74afe68f696f59a0e24cc79f2031)
Cc: Stefano Babic
Cc: Peng Fan
Signed-off-by: Jagan Teki
---
board/freescale/mx6ullevk/MAIN
Hi Lukasz,
On 02/01/2017 15:51, Lukasz Majewski wrote:
> This patch provides u-boot support for Liebherr (LWN) mccmon6 board.
>
> Signed-off-by: Lukasz Majewski
> ---
> Changes for v4:
> - Update board/liebherr/mccmon6/MAINTAINERS entry to quiet buildman warnings
>
> Changes for v3:
> - Define
Hi!
I would need help related to nand boot with am335x based board. Board boots
from mmc (sd card), but not from nand flash.
I have been using yocto/poky build system with meta-ti layer that brings up
u-boot-ti-staging. Current u-boot version is 2016.05 and
linux-ti-staging-rt-4.4.
I have used am3
On Wed, Dec 28, 2016 at 08:43:48AM -0800, York Sun wrote:
> Use Kconfig option E6500 and clean up existing usage.
>
> Signed-off-by: York Sun
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing
On Wed, Dec 28, 2016 at 08:43:50AM -0800, York Sun wrote:
> Use Kconfig option SYS_PPC64 instead.
>
> Signed-off-by: York Sun
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@list
On Wed, Dec 28, 2016 at 08:43:49AM -0800, York Sun wrote:
> Use Kconfig option to select chassis version.
>
> Signed-off-by: York Sun
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-B
On Wed, Dec 28, 2016 at 08:43:47AM -0800, York Sun wrote:
> After most config options are moved to Kconfig, the unused ifdef
> or elif can be removed.
>
> Signed-off-by: York Sun
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
__
On Wed, Dec 28, 2016 at 08:43:46AM -0800, York Sun wrote:
> Use Kconfig to select DDR version instead of using config header.
>
> Signed-off-by: York Sun
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-B
On Wed, Dec 28, 2016 at 08:43:43AM -0800, York Sun wrote:
> Use Kconfig to select errata workaround.
>
> Signed-off-by: York Sun
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@l
On Wed, Dec 28, 2016 at 08:43:44AM -0800, York Sun wrote:
> Use option NUM_DDR_CONTROLLERS in ddr Kconfig and clean up existing
> usage in ls102xa and fsl-layerscape. Remove all powerpc macros in
> config header and board header files.
>
> Signed-off-by: York Sun
Applied to u-boot/master, thank
On Wed, Dec 28, 2016 at 08:43:42AM -0800, York Sun wrote:
> Add option SYS_FSL_ERRATUM_ESDHC111, SYS_FSL_ERRATUM_ESDHC13,
> SYS_FSL_ERRATUM_ESDHC135, SYS_FSL_ERRATUM_ESDHC_A001 to mmc Kconfig.
> Move existing macros to related Kconfig.
>
> Signed-off-by: York Sun
Applied to u-boot/master, thank
On Wed, Dec 28, 2016 at 08:43:38AM -0800, York Sun wrote:
> Use TARGET_T2081QDS from Kconfig instead.
>
> Signed-off-by: York Sun
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@
On Wed, Dec 28, 2016 at 08:43:41AM -0800, York Sun wrote:
> Use Kconfig to select errata workaround.
>
> Signed-off-by: York Sun
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@l
On Wed, Dec 28, 2016 at 08:43:40AM -0800, York Sun wrote:
> Create driver/ddr/fsl/Kconfig and move existing options. Clean up
> existing macros.
>
> Signed-off-by: York Sun
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
On Wed, Dec 28, 2016 at 08:43:39AM -0800, York Sun wrote:
> Remove this macro. It was added by e622d9ed but actually wasn't used.
>
> Signed-off-by: York Sun
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
On Wed, Dec 28, 2016 at 08:43:37AM -0800, York Sun wrote:
> Use TARGET_T2080RDB from Kconfig instead.
>
> Signed-off-by: York Sun
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@
On Wed, Dec 28, 2016 at 08:43:35AM -0800, York Sun wrote:
> Use TARGET_T1040QDS from Kconfig instead.
>
> Signed-off-by: York Sun
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@
On Wed, Dec 28, 2016 at 08:43:32AM -0800, York Sun wrote:
> Remove these SoCs from Kconfig because they don't have individual
> configuration. Clean up existing macros.
>
> Signed-off-by: York Sun
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
On Wed, Dec 28, 2016 at 08:43:31AM -0800, York Sun wrote:
> Use Kconfig option to set little- or big-endian access to secure
> boot and trust architecture.
>
> Signed-off-by: York Sun
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
_
On Wed, Dec 28, 2016 at 08:43:29AM -0800, York Sun wrote:
> Use Kconfig SYS_PPC_E500_DEBUG_TLB and clean up existing macros.
>
> Signed-off-by: York Sun
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Bo
On Wed, Dec 28, 2016 at 08:43:30AM -0800, York Sun wrote:
> Instead of define CONFIG_SYS_FSL_SEC_COMPAT in header files for PowerPC
> and ARM SoCs, move it to Kconfig under the driver.
>
> Signed-off-by: York Sun
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital si
On Wed, Dec 28, 2016 at 08:43:28AM -0800, York Sun wrote:
> Use Kconfig option for SYS_NUM_TLBCAMS and clean up existing macros.
>
> Signed-off-by: York Sun
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
On Wed, Jan 04, 2017 at 10:05:55AM -0700, Tom Warren wrote:
> Tom,
>
> Please pull u-boot-tegra/master into U-Boot/master. Thanks!
>
> All Tegra builds are OK, and Stephen's automated test system reports that
> all tests pass.
>
> The following changes since commit 87f5f5417fc897df0b05826b408f0
> -Original Message-
> From: Jaehoon Chung [mailto:jh80.ch...@samsung.com]
> Sent: Thursday, January 05, 2017 8:33 AM
> To: york sun; Y.B. Lu
> Cc: u-boot@lists.denx.de
> Subject: Re: [PATCH 1/4] mmc: fsl_esdhc: make GPIO support optional
>
> Hi,
>
> On 01/05/2017 04:52 AM, york sun wrote
From: Sjoerd Simons
Enable the various configuration option required to get the ethernet
interface up and running on Radxa Rock2 and Firefly.
Signed-off-by: Sjoerd Simons
Signed-off-by: Romain Perier
Reviewed-by: Simon Glass
Acked-by: Joe Hershberger
---
Changes in v6:
- Changed Acked-by to
From: Sjoerd Simons
Now that at least on the firefly board we have network support, enable
PXE and DHCP boot targets by default.
Signed-off-by: Sjoerd Simons
Acked-by: Simon Glass
Acked-by: Joe Hershberger
---
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Ch
From: Sjoerd Simons
Now that ethernet support works, it can be dropped from the rockchip
TODO
Signed-off-by: Sjoerd Simons
Acked-by: Simon Glass
Acked-by: Joe Hershberger
Signed-off-by: Simon Glass
---
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3:
- Add a few ne
From: Simon Glass
Export all functions so that drivers can use them, or not, as the need
arises.
Signed-off-by: Simon Glass
Signed-off-by: Romain Perier
Acked-by: Joe Hershberger
---
Changes in v6:
- Changed Acked-by to Signed-off-by for Romain
Changes in v5:
- Add Acked-by for Romain
Change
From: Sjoerd Simons
Add a new driver for the GMAC ethernet interface present in Rockchip
RK3288 SOCs. This driver subclasses the generic design-ware driver to
add the glue needed specifically for Rockchip.
Signed-off-by: Sjoerd Simons
Signed-off-by: Simon Glass
Signed-off-by: Romain Perier
Ac
From: Simon Glass
With rockchip we need to make adjustments after the link speed is set but
before enabling received/transmit. In preparation for this, split these
two pieces into separate functions.
Signed-off-by: Simon Glass
Signed-off-by: Romain Perier
Acked-by: Joe Hershberger
---
Change
From: Simon Glass
This function can fail, so return the error if there is one.
Signed-off-by: Simon Glass
Signed-off-by: Romain Perier
Acked-by: Joe Hershberger
---
Changes in v6:
- Changed Acked-by to Signed-off-by for Romain
Changes in v5:
- Add Acked-by for Romain
Changes in v4: None
Chan
>From Romain:
This is a resent of Simon's v4 series. I have changed what was suggested
by David Wu about the driver name (rename gmac_rk3288 to gmac_rockchip).
I have also tested the whole series on a rock2 square board, updated the
configuration files for rock2 and firefly boards and added some
Si
From: Simon Glass
This is the only RK3399 device without DHCP. Enable it so that we
can use a common BOOT_TARGET_DEVICES setting. It is likely useful to be
able to use USB networking, at least. Full networking can be enabled when
a suitable platform needs it.
Signed-off-by: Simon Glass
---
Cha
>From Simon:
This v3 patch is an update on Sjoerd's original v2 series from Feburary.
I have dealt with the changes requested at the time, and adjusted the way
that the speed change is handled.
Tested on firefly-rk3288, rock2.
Original cover letter:
To add support I've taken a slightly different
From: Sjoerd Simons
To allow other DM drivers to subclass the designware driver various
functions and structures need to be exported. Export these.
Signed-off-by: Sjoerd Simons
Signed-off-by: Romain Perier
Reviewed-by: Bin Meng
Acked-by: Simon Glass
Acked-by: Joe Hershberger
---
Changes in
From: Sjoerd Simons
Enable the various configuration option required to get the ethernet
interface up and running on Radxa Rock2 and Firefly.
Signed-off-by: Sjoerd Simons
Reviewed-by: Simon Glass
Acked-by: Joe Hershberger
Acked-by: Romain Perier
---
Changes in v5:
- Added Acked-by for Romai
From: Simon Glass
Export all functions so that drivers can use them, or not, as the need
arises.
Signed-off-by: Simon Glass
Acked-by: Joe Hershberger
Acked-by: Romain Perier
---
Changes in v5:
- Add Acked-by for Romain
Changes in v4: None
Changes in v3:
- Add new patch to export the operatio
From: Sjoerd Simons
Now that ethernet support works, it can be dropped from the rockchip
TODO
Signed-off-by: Sjoerd Simons
Acked-by: Simon Glass
Acked-by: Joe Hershberger
Signed-off-by: Simon Glass
---
Changes in v5: None
Changes in v4: None
Changes in v3:
- Add a few new patches
- Drop the
> -Original Message-
> From: york sun
> Sent: Thursday, January 05, 2017 3:52 AM
> To: Y.B. Lu
> Cc: u-boot@lists.denx.de; Jaehoon Chung
> Subject: Re: [PATCH 1/4] mmc: fsl_esdhc: make GPIO support optional
>
> On 12/06/2016 08:08 PM, Yangbo Lu wrote:
> > There would be compiling error as
Update bootscript and its addresses for Layerscape Chasis 3
based platforms instead of individual SoCs.
Signed-off-by: Sumit Garg
Signed-off-by: Udit Agarwal
---
arch/arm/include/asm/fsl_secure_boot.h | 12 ++--
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/inc
Hi guys,
discard this patches..there are some build issue.
I will resend the V3 within this week.
Sorry for spamming.
Best Regards,
Jaehoon Chung
On 01/05/2017 07:16 PM, Jaehoon Chung wrote:
> This patchset is for supporting pmic driver-mode on universal_c210 board.
> It's using i2c-s3c24x0.c fi
Enable CONFIG_SYS_I2C_S3C24X0 for i2c
Signed-off-by: Jaehoon Chung
---
include/configs/s5pc210_universal.h | 3 +++
1 file changed, 3 insertions(+)
diff --git a/include/configs/s5pc210_universal.h
b/include/configs/s5pc210_universal.h
index 1bfefe9..dd3bdc6 100644
--- a/include/configs/s5pc210
Hi Jaehoon
> Remove the soft_i2c codes in universal.c.
> It seems a deadcode because of no usage.
The soft_i2c was needed to control the fuel gauge (not sure if on c210
you have it mounted), which at Trats was connected via simple gpios
(not the one muxed with HW I2C).
BTW: I do see that now yo
Use the node's name for i2c.
Signed-off-by: Jaehoon Chung
---
arch/arm/dts/exynos4.dtsi | 27 +++
1 file changed, 19 insertions(+), 8 deletions(-)
diff --git a/arch/arm/dts/exynos4.dtsi b/arch/arm/dts/exynos4.dtsi
index 7de227c..a5a00c8 100644
--- a/arch/arm/dts/exynos4.
Enable the CONFIG_DM_PMIC and CONFIG_DM_PMIC_MAX8998.
s5pc210_universal board is using max8998 pmic.
To use the i2c/pmic driver model, enable these configurations.
Signed-off-by: Jaehoon Chung
---
configs/s5pc210_universal_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/s
Add the i2c_5 node and pmic as its child node.
Signed-off-by: Jaehoon Chung
---
arch/arm/dts/exynos4210-universal_c210.dts | 164 +
1 file changed, 164 insertions(+)
diff --git a/arch/arm/dts/exynos4210-universal_c210.dts
b/arch/arm/dts/exynos4210-universal_c210.dts
Revmoe the "ifndef CONFIG_DM_I2C".
Intead, use the driver model for max8998.
Signed-off-by: Jaehoon Chung
---
board/samsung/universal_c210/universal.c | 169 +--
1 file changed, 94 insertions(+), 75 deletions(-)
diff --git a/board/samsung/universal_c210/universal.c
If CONFIG_SYS_I2C_S3C24X0_SLAVE isn't defined, then complie error should
be occurred.
This patch is for preventing it.
Signed-off-by: Jaehoon Chung
---
drivers/i2c/s3c24x0_i2c.c | 8 +++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c
Adding Kconfig for SYS_I2C_S3C24X0.
Signed-off-by: Jaehoon Chung
---
drivers/i2c/Kconfig | 6 ++
1 file changed, 6 insertions(+)
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 051f911..e191b75 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -155,6 +155,12 @@ conf
This patchset is for supporting pmic driver-mode on universal_c210 board.
It's using i2c-s3c24x0.c file. (Fixes some complier error issue.)
Remove the soft_i2c codes in universal.c.
It seems a deadcode because of no usage.
*dm tree
i2c [ + ]|-- i2c@138b
pmic[ + ]|
+CC'd Simon.
To Simon,
Sorry i missed CC'd.
If you want to CC'd, i will resend the patches..
Let me know, plz.
Best Regards,
Jaehoon Chung
On 01/05/2017 05:16 PM, Jaehoon Chung wrote:
> This patchset is for supporting pmic driver-mode on universal_c210 board.
> It's using i2c-s3c24x0.c file. (Fi
Revmoe the "ifndef CONFIG_DM_I2C".
Intead, use the driver model for max8998.
Signed-off-by: Jaehoon Chung
---
board/samsung/universal_c210/universal.c | 169 +--
1 file changed, 94 insertions(+), 75 deletions(-)
diff --git a/board/samsung/universal_c210/universal.c
Adding Kconfig for SYS_I2C_S3C24X0.
Signed-off-by: Jaehoon Chung
---
drivers/i2c/Kconfig | 6 ++
1 file changed, 6 insertions(+)
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 051f911..a2d7a38 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -155,6 +155,12 @@ conf
Use the node's name for i2c.
Signed-off-by: Jaehoon Chung
---
arch/arm/dts/exynos4.dtsi | 27 +++
1 file changed, 19 insertions(+), 8 deletions(-)
diff --git a/arch/arm/dts/exynos4.dtsi b/arch/arm/dts/exynos4.dtsi
index 7de227c..a5a00c8 100644
--- a/arch/arm/dts/exynos4.
This patchset is for supporting pmic driver-mode on universal_c210 board.
It's using i2c-s3c24x0.c file. (Fixes some complier error issue.)
Remove the soft_i2c codes in universal.c.
It seems a deadcode because of no usage.
*dm tree
i2c [ + ]|-- i2c@138b
pmic[ + ]|
Enable the CONFIG_DM_PMIC and CONFIG_DM_PMIC_MAX8998.
s5pc210_universal board is using max8998 pmic.
To use the i2c/pmic driver model, enable these configurations.
Signed-off-by: Jaehoon Chung
---
configs/s5pc210_universal_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/s
If CONFIG_SYS_I2C_S3C24X0_SLAVE isn't defined, then complie error should
be occurred.
This patch is for preventing it.
Signed-off-by: Jaehoon Chung
---
drivers/i2c/s3c24x0_i2c.c | 8 +++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c
Removes the codes of soft_i2c.
There is no usasge for universal_c210, also didn't define
CONFIG_SOFT_I2C_GPIO_SCL.
This code seems a dead code.
Signed-off-by: Jaehoon Chung
---
board/samsung/universal_c210/universal.c | 11 ---
1 file changed, 11 deletions(-)
diff --git a/board/samsung/
On Wed, Jan 4, 2017 at 11:09 PM, Wolfgang Denk wrote:
> Dear Chris Packham,
>
> In message <20170104003626.4211-2-judge.pack...@gmail.com> you wrote:
>> Ensure '.' is used to separate octets. If another character is seen
>> reject the string outright and return 0.0.0.0.
>
> What is this good for?
96 matches
Mail list logo