Along with using new mode it fixes eMMC instability on Pinebook
Signed-off-by: Vasily Khoruzhick
---
arch/arm/include/asm/arch-sunxi/mmc.h | 6 +-
drivers/mmc/sunxi_mmc.c | 11 +++
2 files changed, 16 insertions(+), 1 deletion(-)
diff --git
That is necessary for using automatic calibration on A64 eMMC.
Signed-off-by: Vasily khoruzhick
---
arch/arm/mach-sunxi/Kconfig | 1 +
drivers/mmc/sunxi_mmc.c | 2 ++
2 files changed, 3 insertions(+)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index
eMMC seems to require new clocking mode and calibration on A64,
otherwise it is pretty unstable on some boards (e.g. Pinebook)
with some eMMCs.
v2: - improve comment about calibration for eMMC on A64
- simplify ifdef-s around configuring delays
v3: - fix fallout due to ifdef simplification in
On Fri, Jun 01, 2018 at 09:24:58PM +0200, Daniel Schwierzeck wrote:
> Travis CI build:
>
> https://travis-ci.org/danielschwierzeck/u-boot/builds/386679112
>
>
>
> The following changes since commit c3c863880479edeb5b08226e622d13c91326e4a7:
>
> add FIT data-position & data-offset property
On Fri, Jun 01, 2018 at 03:23:33PM +0200, Michal Simek wrote:
> Hi Tom,
>
> please pull these changes to your tree.
> Buildman and travis looks good
> https://travis-ci.org/michalsimek/u-boot/builds/386578029
>
> Thanks,
> Michal
>
> The following changes since commit
On Fri, Jun 1, 2018 at 1:42 AM Maxime Ripard wrote:
>
> On Thu, May 31, 2018 at 09:43:20AM -0700, Vasily Khoruzhick wrote:
> > On Thu, May 31, 2018 at 5:00 AM, Maxime Ripard
> > wrote:
> > > On Wed, May 30, 2018 at 09:02:18PM -0700, Vasily Khoruzhick wrote:
> > >> That is necessary for using
The following changes since commit c3c863880479edeb5b08226e622d13c91326e4a7:
add FIT data-position & data-offset property support (2018-05-26
18:19:19 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-sh.git master
for you to fetch changes up to
Move the FPGA loading from IS_ENABLED(CONFIG_SPL_OS_BOOT) &&
IS_ENABLED(CONFIG_SPL_GZIP) conditional. The FPGA loading can
be used without OS loading and GZIP support in SPL. This issue
was most likely induced by some merge conflict, so fix it.
Signed-off-by: Marek Vasut
Cc: Tom Rini
---
V2:
Travis CI build:
https://travis-ci.org/danielschwierzeck/u-boot/builds/386679112
The following changes since commit c3c863880479edeb5b08226e622d13c91326e4a7:
add FIT data-position & data-offset property support (2018-05-26 18:19:19
-0400)
are available in the Git repository at:
On Thu, May 31, 2018 at 06:09:14PM +0200, Marek Vasut wrote:
> Move the FPGA loading from IS_ENABLED(CONFIG_SPL_OS_BOOT) &&
> IS_ENABLED(CONFIG_SPL_GZIP) conditional. The FPGA loading can
> be used without OS loading and GZIP support in SPL. This issue
> was most likely induced by some merge
On Fri, Jun 1, 2018 at 11:37 PM, Bob Ham wrote:
> On 01/06/18 05:56, Jagan Teki wrote:
>> On Fri, Jun 1, 2018 at 2:59 AM, Bob Ham wrote:
>
>>> I was going to send the Linux .dts after the U-Boot .dts was accepted,
>>> in case there were changes needed.
>>
>> It could be other way around, try to
On 01/06/18 05:56, Jagan Teki wrote:
> On Fri, Jun 1, 2018 at 2:59 AM, Bob Ham wrote:
>> I was going to send the Linux .dts after the U-Boot .dts was accepted,
>> in case there were changes needed.
>
> It could be other way around, try to send Linux first.
Sent. Out of interest, why Linux
On Fri, Jun 01, 2018 at 09:25:19AM -0600, Simon Glass wrote:
> +Miquel due to sandbox TPM issue
>
> Hi Tom,
>
> On 25 May 2018 at 06:27, Tom Rini wrote:
> > In order to have the test.py tests for TPMv2 run automatically we need
> > to have one of our sandbox builds use TPMv2 rather than TPMv1.
On Thu, May 31, 2018 at 08:06:20PM +0200, Marek Vasut wrote:
> The following changes since commit c3c863880479edeb5b08226e622d13c91326e4a7:
>
> add FIT data-position & data-offset property support (2018-05-26
> 18:19:19 -0400)
>
> are available in the Git repository at:
>
>
On Thu, May 31, 2018 at 05:22:51PM +, Alexey Brodkin wrote:
> Hi Tom,
>
> The following changes since commit c3c863880479edeb5b08226e622d13c91326e4a7:
>
> add FIT data-position & data-offset property support (2018-05-26 18:19:19
> -0400)
>
> are available in the Git repository at:
>
>
On Fri, Jun 01, 2018 at 08:27:03AM -0600, Simon Glass wrote:
> Hi Tom,
>
> On 26 May 2018 at 11:06, Tom Rini wrote:
> > The most portable way to get access to coverage is to invoke it as
> > 'python-coverage'.
> >
> > Cc: Simon Glass
> > Signed-off-by: Tom Rini
> > ---
> > So, here's the set
On 06/01/2018 04:05 AM, Maxime Ripard wrote:
On Thu, May 31, 2018 at 05:59:16PM -0700, Martin Kelly wrote:
Currently, sunxi-common.h ignores CONFIG_DEFAULT_FDT_FILE and assumes
the kernel fdtfile and the u-boot devicetree names are the same.
Although this is typically the case, sometimes you
On 05/31/2018 07:45 PM, klaus.go...@theobroma-systems.com wrote:
On 01.06.2018, at 02:59, Martin Kelly wrote:
Currently, sunxi-common.h ignores CONFIG_DEFAULT_FDT_FILE and assumes
the kernel fdtfile and the u-boot devicetree names are the same.
Although this is typically the case, sometimes
From: Vicente Bergas
U-Boot has a built-in dtc. Using it removes one dependency from the host.
Signed-off-by: Vicente Bergas
---
configs/evb-rk3399_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig
index
From: Vicente Bergas
Signed-off-by: Vicente Bergas
---
configs/evb-rk3399_defconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig
index 05ad0da336..69a4cc2239 100644
--- a/configs/evb-rk3399_defconfig
+++
From: Vicente Bergas
It has been tested with this option disabled and it works fine.
The benefit of doing so is that this is the last dependency on python to
build U-Boot for the Sapphire board.
Signed-off-by: Vicente Bergas
---
configs/evb-rk3399_defconfig | 1 -
1 file changed, 1
From: Vicente Bergas
make_fit_atf generates an .its file based on U-Boot and ATF .elf files.
It also extracts all loadable sections from ATF.
It tries to somewhat mimic the behaviour of
arch/arm/mach-rockchip/make_fit_atf.py
Signed-off-by: Vicente Bergas
---
tools/Makefile | 2 +
From: Vicente Bergas
This patch series remove the dependency on python and dtc from the host
for the Sapphire board.
It does not conform to the U-Boot coding style. It has been posted here for
informational purposes only. If there is interest in merging it, feel free
to modify it at will, it is
On Mon, May 7, 2018 at 3:12 PM, Ley Foon Tan wrote:
> Change to use devfdt_get_addr_index() function to get fdt address.
>
> Original code has compilation warning below:
>
> drivers/spi/cadence_qspi.c: In function ‘cadence_spi_ofdata_to_platdata’:
> drivers/spi/cadence_qspi.c:297:18: warning:
On Mon, May 28, 2018 at 4:48 PM, Jagan Teki wrote:
> This series rework of previous version where it removes legacy
> usb phy handling and added phy driver on generic-phy framework.
>
> Current implementation phy driver is unable to get pinctrl, clock
> and reset details from DT since the dm code
Amarula A64-Relic is A64 based IoT device, which support
- Allwinner A64 Cortex-A53
- Mali-400MP2 GPU
- AXP803 PMIC
- 1GB DDR3 RAM
- 8GB eMMC
- AP6330 Wifi/BLE
- MIPI-DSI
- CSI: OV5640 sensor
- USB OTG
- 12V DC power supply
Signed-off-by: Jagan Teki
---
Changes for v4:
- Drop
The documentation says this is not implemented, but it is. Update the
documentation, and clarify its operation.
Signed-off-by: Simon Glass
---
Changes in v2: None
tools/binman/README | 7 +++
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/tools/binman/README
Provide an easy way to execute a single binman test by specifying it on
the command line.
Signed-off-by: Simon Glass
---
Changes in v2: None
tools/binman/binman.py | 21 +
1 file changed, 17 insertions(+), 4 deletions(-)
diff --git a/tools/binman/binman.py
Sometimes we have several sections which repeat the same entries (e.g. for
a read-only and read-write version of the same section). It is useful to
be able to tell these entries apart by name.
Add a new 'name-prefix' property for sections, which causes all entries
within that section to have a
Fix a few missing comments and tidy up some existing ones.
Signed-off-by: Simon Glass
---
Changes in v2: None
tools/binman/README | 6 +++---
tools/binman/ftest.py | 29 +++--
tools/binman/image.py | 5 +
3 files changed, 27 insertions(+), 13 deletions(-)
diff
It is useful to be able to see a list of regions in each image produced by
binman. Add a -m option to output this information in a '.map' file
alongside the image file.
Signed-off-by: Simon Glass
---
Changes in v2: None
tools/binman/README | 20 +++-
This property is not documented. Add a note to the README.
Signed-off-by: Simon Glass
---
Changes in v2: None
tools/binman/README | 7 +++
1 file changed, 7 insertions(+)
diff --git a/tools/binman/README b/tools/binman/README
index 5ef1246f296..32d89194dd0 100644
---
It is useful to be able to split an image into multiple sections,
each with its own size and position, for cases where a flash device has
read-only and read-write portions.
Add support for this.
Signed-off-by: Simon Glass
---
Changes in v2:
- Add SPDX tag to .dts file
tools/binman/README
At present we set the Python path at the start of binman so we can read
modules in the 'etype' directory. This is a bit messy since it affects
'import' statements through binman.
Adjust the code to set the path locally, just where it is needed. Move
the 'entry' module in with the other base
Entries are now passed a Section object rather than an Image. Rename this
property to avoid confusion.
Signed-off-by: Simon Glass
---
Changes in v2: None
tools/binman/etype/_testing.py| 4 ++--
tools/binman/etype/blob.py| 4 ++--
We now pass a Section object to these functions rather than an Image.
Rename the parameters to avoid confusion.
Signed-off-by: Simon Glass
---
Changes in v2: None
tools/binman/elf.py | 10 +-
tools/binman/elf_test.py | 28 ++--
We want to support multiple sections within a single image. To do this,
move most of the Image class implementation into a new Section class. An
Image contains only a single Section, but at some point we will support
a new 'section' entry, thus allowing Sections within Sections.
Use the name
Allow the same binary to appear multiple times in an image by using the
device-tree unit-address feature (u-boot@0, u-boot@1).
Signed-off-by: Simon Glass
---
Changes in v2:
- Add SPDX tag to .dts file
tools/binman/README | 4
tools/binman/etype/entry.py | 5
This series ads a few more features to binman, principally the ability to
nest entries within other entries, to form hierarchical images.
Also included are support for a map file and some docs tidy-ups.
Changes in v2:
- Add SPDX tag to .dts file
- Put SPDX on the first line in bsection.py
Simon
+Miquel due to sandbox TPM issue
Hi Tom,
On 25 May 2018 at 06:27, Tom Rini wrote:
> In order to have the test.py tests for TPMv2 run automatically we need
> to have one of our sandbox builds use TPMv2 rather than TPMv1. Switch
> sandbox_flattree over to this style of TPM.
The problem seems to
On Thu, May 31, 2018 at 03:13:15PM +0530, Jagan Teki wrote:
> On Thu, May 31, 2018 at 3:07 PM, Maxime Ripard
> wrote:
> > On Tue, May 29, 2018 at 09:50:39PM +0530, Jagan Teki wrote:
> >> On Tue, May 29, 2018 at 9:44 PM, Maxime Ripard
> >> wrote:
> >> > On Mon, May 28, 2018 at 04:34:43PM +0530,
On 06/01/2018 12:37 AM, Xiaoliang Yang wrote:
> Support watchdog driver for fsl-lsch2. If you want to use it,
> please enable CONFIG_IMX_WATCHDOG, and CONFIG_HW_WATCHDOG.
> define CONFIG_WATCHDOG_TIMEOUT_MSECS to set watchdog timeout.
>
> Signed-off-by: Xiaoliang Yang
> ---
>
Hi Tom,
On 28 May 2018 at 13:17, Tom Rini wrote:
> On Sat, May 26, 2018 at 04:18:45PM -0600, Simon Glass wrote:
>> Hi,
>>
>> On 15 May 2018 at 19:52, Simon Glass wrote:
>> > This series ads a few more features to binman, principally the ability to
>> > nest entries within other entries, to form
Hi Tom,
On 26 May 2018 at 11:06, Tom Rini wrote:
> The most portable way to get access to coverage is to invoke it as
> 'python-coverage'.
>
> Cc: Simon Glass
> Signed-off-by: Tom Rini
> ---
> So, here's the set of problems I have. First, running 'pip install
> coverage' doesn't get me a
On 1 June 2018 at 02:45, Ley Foon Tan wrote:
> Add code to reset all reset signals as in Ethernet DT node. A reset property
> is an optional feature,
> so only print out a warning and do not fail if a reset property is not
> present.
>
> If a reset property is discovered, then use it to
Hi,
On 1 June 2018 at 02:45, Ley Foon Tan wrote:
> Add checking for CONFIG_SPL_RESET_SUPPORT to fix compilation error when
> CONFIG_DM_RESET is enabled but CONFIG_SPL_RESET_SUPPORT is disabled in SPL
> build.
>
> Signed-off-by: Ley Foon Tan
> ---
> include/reset.h | 3 ++-
> 1 file changed, 2
On 1 June 2018 at 02:45, Ley Foon Tan wrote:
> Add code to reset all reset signals as in serial DT node. A reset property is
> an optional feature,
> so do not fail if a reset property is not present.
>
> If a reset property is discovered, then use it to deassert, thus bringing the
> IP out of
On 1 June 2018 at 02:45, Ley Foon Tan wrote:
> Add code to reset all reset signals as in mmc DT node. A reset property is an
> optional feature,
> so only print out a warning and do not fail if a reset property is not
> present.
>
> If a reset property is discovered, then use it to deassert,
On 31 May 2018 at 02:08, wrote:
> From: Tien Fong Chee
>
> Update pdma properties for Stratix 10
>
> Signed-off-by: Tien Fong Chee
> ---
> arch/arm/dts/socfpga_stratix10.dtsi | 20
> 1 file changed, 20 insertions(+)
Reviewed-by: Simon Glass
Is there a DT binding file
Hi,
On 31 May 2018 at 02:08, wrote:
> From: Tien Fong Chee
>
> Update the dma_memcpy description on return argument for DMA330 driver.
>
> Signed-off-by: Tien Fong Chee
> ---
> include/dma.h | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/include/dma.h
On 31 May 2018 at 02:08, wrote:
> From: Tien Fong Chee
>
> Factor out the dma_get_device from DMA class function so caller can
> set some configuration and changes on the DMA device structure which
> is return by calling dma_get_device before device instance is processed by
> DMA class
Hi Tien,
On 31 May 2018 at 02:08, wrote:
> From: Tien Fong Chee
>
> This new DMA class function enables DMA being used for initializing
> a range of destination such as memory to zeros. This is quite useful to
> help accelerating the performance in scrubbing memory when ECC is enabled.
>
>
Hi Tien,
On 31 May 2018 at 02:08, wrote:
> From: Tien Fong Chee
>
> Enable DMAC driver support for DMA-330 controller.
> The driver is also compatible to PL330 product.
>
> Signed-off-by: Tien Fong Chee
> ---
> drivers/dma/Kconfig |9 +-
> drivers/dma/Makefile |1 +
>
On 31 May 2018 at 01:57, Patrice Chotard wrote:
> From: Patrick Delaunay
>
> Don't disable regulator which are tagged as "regulator-always-on" in DT.
>
> Signed-off-by: Patrick Delaunay
> Signed-off-by: Patrice Chotard
> ---
>
> drivers/power/regulator/regulator-uclass.c | 5 +
> 1 file
On 31.5.2018 11:40, Siva Durga Prasad Paladugu wrote:
> This patch modifies the arguments parsing code by parsing
> based on requested operation for fpga loadfs and then
> parses the most common/basic args for other fpga load
> commands. This makes it easy for new command extensions
> or additions
Hi Tom,
please pull these changes to your tree.
Buildman and travis looks good
https://travis-ci.org/michalsimek/u-boot/builds/386578029
Thanks,
Michal
The following changes since commit c3c863880479edeb5b08226e622d13c91326e4a7:
add FIT data-position & data-offset property support
Hi,
On 29.5.2018 14:36, Jean-Jacques Hiblot wrote:
> This series aims at bringing improvements to the dwc3_generic driver so
> that it can be used by most of the platforms using the dwc3 controller.
> This series applies on top of the master branch of USB tree.
> It also also available on github:
Hi Jean-Jacques,
> Add 2 functions to wrap the calls to board_usb_init() and
> board_usb_cleanup().
> This is a preparatory work for DM support for UDC drivers
> (DM_USB_DEV).
>
> Signed-off-by: Jean-Jacques Hiblot
>
> ---
>
> Changes in v2:
> - Updated commit log
> - Fixed typo in thordown.c
Hi Jean-Jacques,
> Using CONFIG_DM_USB for this purpose prevents using DM_USB for host
> and not for device.
>
> Signed-off-by: Jean-Jacques Hiblot
>
> ---
>
> Changes in v2:
> - select DM_USB_DEV by default for zynqmp platforms
>
> arch/arm/Kconfig| 2 ++
>
On Thu, May 31, 2018 at 05:59:16PM -0700, Martin Kelly wrote:
> Currently, sunxi-common.h ignores CONFIG_DEFAULT_FDT_FILE and assumes
> the kernel fdtfile and the u-boot devicetree names are the same.
> Although this is typically the case, sometimes you might want to
> customize one of these
v1 -> v2:
Because of imx_watchdog.c driver not supports all layerscape SoCs, change to
build imx_watchdog.o only when enable IMX_WATCHDOG for fsl-lsch2 SoCs.
Add IMX_WATCHDOG in drivers/watchdog/Kconfig.
Changes in v2:
drivers/watchdog/Kconfig |6 ++
Add Kconfig support for CONFIG_WATCHDOG_RESET_DISABLE, use this config
to disable watchdog reset in imx_watchdog driver, so that the watchdog
will not be fed in u-boot.
Signed-off-by: Xiaoliang Yang
---
arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch2 |3 +++
drivers/watchdog/Kconfig
Support watchdog driver for fsl-lsch2. If you want to use it,
please enable CONFIG_IMX_WATCHDOG, and CONFIG_HW_WATCHDOG.
define CONFIG_WATCHDOG_TIMEOUT_MSECS to set watchdog timeout.
Signed-off-by: Xiaoliang Yang
---
arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch2 | 10 ++
Hi York,
I think it's better not to affect the original i.mx SoCs. If not in i.mx SoCs,
we can enable it by define CONFIG_IMX_WATCHDOG in config file. Or do you think
it's better to use "select IMX_WATCHDOG" to enable it in default for our LSCH2
SoCs/platforms?
Here is the patch I have
Hi York，
Sure, thanks for your suggestion. I'll add IMX_WATCHDOG in Kconfig, users can
enable it for the platforms they needed.
I will push v2 patch later, please help to review it, thanks.
Regards,
Xiaoliang Yang
-Original Message-
From: York Sun
Sent: 2018年6月1日 11:20
To: Xiaoliang
Hi - I have a target Atheros 9344 board on which I have loaded U-boot
version 1.23.2. On the reference board, the DRAM clock frequency has
been set to 400 MHz and it works well. But when the same clock
frequency is used on my target board , mtest (memory test) fails.
However, when I reduced the
On Thu, May 24, 2018 at 7:05 PM, Dr. Philipp Tomsich
wrote:
> Vincente,
>
> On 24 May 2018, at 18:48, Vicente Bergas wrote:
>
> Hello Philipp,
> your answer is much appreciated.
>
> On Thu, May 24, 2018 at 1:07 PM, Dr. Philipp Tomsich
> wrote:
>
> Vincente,
>
> On 19 May 2018, at 16:58, Vicente
On 06/01/2018 10:21 AM, AKASHI Takahiro wrote:
Tuomas,
On Thu, May 31, 2018 at 01:32:20PM +0300, Tuomas Tynkkynen wrote:
Hi Akashi,
On 05/31/2018 08:05 AM, AKASHI Takahiro wrote:
Simon,
On Wed, May 30, 2018 at 01:18:30PM -0600, Simon Glass wrote:
+Tuomas
Hi Akashi,
On 28 May 2018 at
Hi Guys,
I met below error from time to time when build U-Boot project.
fixdep: error opening config file: arch/arm/include/asm/arch/hardware.h: No
such file or directory
The folder 'arch/arm/include/asm/arch' is a link for
'arch/arm/include/asm/arch-rockchip',
which is dynamic
On 06/01/2018 10:52 AM, Ley Foon Tan wrote:
> Use "%lu" for size_t data type.
>
> Compilation warning as below:
>
> In file included from include/linux/bug.h:7:0,
> from include/common.h:26,
> from drivers/spi/cadence_qspi.c:8:
> drivers/spi/cadence_qspi.c: In
On 06/01/2018 10:52 AM, Ley Foon Tan wrote:
> Use "%p" to print cmdbuf.
>
> Compilation warning as below:
>
> CC spl/drivers/spi/cadence_qspi_apb.o
> LD spl/lib/built-in.o
> drivers/spi/cadence_qspi_apb.c: In function
> ‘cadence_qspi_apb_indirect_write_setup’:
>
Now that Travis CI is building with gcc-7.3.0, we can add
build coverage for all combinations of MIPS Release 6
instruction sets (MIPS32, MIPS64, Big Endian, Little Endian).
Add mew default configs for Boston board for all MIPS Release 6
variants.
Signed-off-by: Daniel Schwierzeck
---
On Fri, Jun 1, 2018 at 1:32 AM, Martin Kelly wrote:
> On 05/31/2018 12:58 PM, klaus.go...@theobroma-systems.com wrote:
>>
[snip]
>>
>>
>> I run into the same issue for the rockchip architecture[1]. After giving
>> up on finding a
>> rock-solid solution for detecting the emtpy string I decided
On 05/31/2018 08:17 PM, Tom Rini wrote:
> On Sun, May 27, 2018 at 07:54:16PM +0200, Heinrich Schuchardt
> wrote:
>
>> The file is not referenced anywhere. To display a change log we
>> have the 'git log' command.
>>
>> Signed-off-by: Heinrich Schuchardt
>
> Applied to u-boot/master, thanks!
>
Use "%p" to print cmdbuf.
Compilation warning as below:
CC spl/drivers/spi/cadence_qspi_apb.o
LD spl/lib/built-in.o
drivers/spi/cadence_qspi_apb.c: In function
‘cadence_qspi_apb_indirect_write_setup’:
drivers/spi/cadence_qspi_apb.c:696:18: warning: cast from pointer to integer of
Use "%lu" for size_t data type.
Compilation warning as below:
In file included from include/linux/bug.h:7:0,
from include/common.h:26,
from drivers/spi/cadence_qspi.c:8:
drivers/spi/cadence_qspi.c: In function ‘cadence_spi_xfer’:
Add code to reset all reset signals as in Ethernet DT node. A reset property is
an optional feature,
so only print out a warning and do not fail if a reset property is not present.
If a reset property is discovered, then use it to deassert, thus bringing the
IP out of reset.
Signed-off-by: Ley
Add code to reset all reset signals as in mmc DT node. A reset property is an
optional feature,
so only print out a warning and do not fail if a reset property is not present.
If a reset property is discovered, then use it to deassert, thus bringing the
IP out of reset.
Signed-off-by: Ley Foon
Add checking for CONFIG_SPL_RESET_SUPPORT to fix compilation error when
CONFIG_DM_RESET is enabled but CONFIG_SPL_RESET_SUPPORT is disabled in SPL
build.
Signed-off-by: Ley Foon Tan
---
include/reset.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/include/reset.h
Add code to reset all reset signals as in serial DT node. A reset property is
an optional feature,
so do not fail if a reset property is not present.
If a reset property is discovered, then use it to deassert, thus bringing the
IP out of reset.
Signed-off-by: Ley Foon Tan
Reviewed-by: Marek
Add reset ctrl to dwmmc socfpga, designware Ethernet and ns16550 serial drivers.
A reset property is an optional feature, so only print out a warning and
do not fail if a reset property is not present.
If a reset property is discovered, then use it to deassert, thus bringing the
IP out of
On 29.5.2018 16:33, Siva Durga Prasad Paladugu wrote:
> This patch adds HS200 suuport for ZynqMP and enables
> the same for ZC1751 DC1 board which has eMMC on it.
>
> Signed-off-by: Siva Durga Prasad Paladugu
> ---
> Changes from v1:
> - Fixed coding style as per comment
> ---
>
On 29.5.2018 16:33, Siva Durga Prasad Paladugu wrote:
> This patch updates sdhci_send_command() to handle MMC
> HS200 tuning command.
>
> Signed-off-by: Siva Durga Prasad Paladugu
> ---
> Changes from v1:
> - Fixed spacings as per comment
> ---
> drivers/mmc/sdhci.c | 9 ++---
> 1 file
On Thu, May 31, 2018 at 09:43:20AM -0700, Vasily Khoruzhick wrote:
> On Thu, May 31, 2018 at 5:00 AM, Maxime Ripard
> wrote:
> > On Wed, May 30, 2018 at 09:02:18PM -0700, Vasily Khoruzhick wrote:
> >> That is necessary for using automatic calibration on A64 eMMC.
> >>
> >> Signed-off-by: Vasily
On 06/01/2018 10:13 AM, Ley Foon Tan wrote:
> Add do_bridge_reset() function for Arria 10, it is required by misc.c.
>
> arch/arm/mach-socfpga/built-in.o: In function `do_bridge':
> arch/arm/mach-socfpga/misc.c:221: undefined reference to `do_bridge_reset'
> make[1]: *** [u-boot] Error 1
>
>
On 06/01/2018 10:13 AM, Ley Foon Tan wrote:
> Add do_bridge_reset() function for Arria 10, it is required by misc.c.
>
> arch/arm/mach-socfpga/built-in.o: In function `do_bridge':
> arch/arm/mach-socfpga/misc.c:221: undefined reference to `do_bridge_reset'
> make[1]: *** [u-boot] Error 1
>
>
On Fri, Jun 1, 2018 at 4:07 PM, Marek Vasut wrote:
> On 05/07/2018 11:42 AM, Ley Foon Tan wrote:
>> Cast to ulong data type.
>>
>> Compilation warning as below:
>>
>> CC spl/drivers/spi/cadence_qspi_apb.o
>> LD spl/lib/built-in.o
>> drivers/spi/cadence_qspi_apb.c: In function
>>
On Fri, Jun 1, 2018 at 4:07 PM, Marek Vasut wrote:
> On 05/07/2018 11:42 AM, Ley Foon Tan wrote:
>> Cast data_bytes to integer.
>>
>> Compilation warning as below:
>>
>> In file included from include/linux/bug.h:7:0,
>> from include/common.h:26,
>> from
Add do_bridge_reset() function for Arria 10, it is required by misc.c.
arch/arm/mach-socfpga/built-in.o: In function `do_bridge':
arch/arm/mach-socfpga/misc.c:221: undefined reference to `do_bridge_reset'
make[1]: *** [u-boot] Error 1
Signed-off-by: Ley Foon Tan
---
On 05/07/2018 11:42 AM, Ley Foon Tan wrote:
> Change to use devfdt_get_addr_index() function to get fdt address.
>
> Original code has compilation warning below:
>
> drivers/spi/cadence_qspi.c: In function ‘cadence_spi_ofdata_to_platdata’:
> drivers/spi/cadence_qspi.c:297:18: warning: cast to
On 05/07/2018 11:42 AM, Ley Foon Tan wrote:
> Cast to ulong data type.
>
> Compilation warning as below:
>
> CC spl/drivers/spi/cadence_qspi_apb.o
> LD spl/lib/built-in.o
> drivers/spi/cadence_qspi_apb.c: In function
> ‘cadence_qspi_apb_indirect_write_setup’:
>
On 06/01/2018 10:03 AM, Ley Foon Tan wrote:
> On Fri, Jun 1, 2018 at 3:49 PM, Marek Vasut wrote:
>> On 06/01/2018 09:30 AM, Ley Foon Tan wrote:
>>> On Fri, Jun 1, 2018 at 2:31 PM, Marek Vasut wrote:
On 06/01/2018 02:23 AM, Tom Rini wrote:
> On Thu, May 31, 2018 at 08:06:50PM +0200,
On 05/07/2018 11:42 AM, Ley Foon Tan wrote:
> Cast data_bytes to integer.
>
> Compilation warning as below:
>
> In file included from include/linux/bug.h:7:0,
> from include/common.h:26,
> from drivers/spi/cadence_qspi.c:8:
> drivers/spi/cadence_qspi.c: In
On Fri, Jun 1, 2018 at 3:49 PM, Marek Vasut wrote:
> On 06/01/2018 09:30 AM, Ley Foon Tan wrote:
>> On Fri, Jun 1, 2018 at 2:31 PM, Marek Vasut wrote:
>>> On 06/01/2018 02:23 AM, Tom Rini wrote:
On Thu, May 31, 2018 at 08:06:50PM +0200, Marek Vasut wrote:
> The following changes
On 06/01/2018 09:30 AM, Ley Foon Tan wrote:
> On Fri, Jun 1, 2018 at 2:31 PM, Marek Vasut wrote:
>> On 06/01/2018 02:23 AM, Tom Rini wrote:
>>> On Thu, May 31, 2018 at 08:06:50PM +0200, Marek Vasut wrote:
>>>
The following changes since commit
c3c863880479edeb5b08226e622d13c91326e4a7:
From: Yoshihiro Shimoda
This patch adds basic support for the Renesas R-Car E3 (R8A77990) SoC:
- PSCI
- CPU (single)
- Cache controller
- Main clocks and controller
- Interrupt controller
- Timer
- PMU
- Reset controller
- Product register
- System controller
- UART for
The PE clock have two parents, add support for picking the correct
one and deriving the clock from it.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
drivers/clk/renesas/clk-rcar-gen3.c | 40 +
drivers/clk/renesas/rcar-gen3-cpg.h | 6 --
2 files
This patch adds initial pinctrl driver to support for the R8A77990 SoC.
Signed-off-by: Takeshi Kihara
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
drivers/pinctrl/renesas/Kconfig| 11 +
drivers/pinctrl/renesas/Makefile |1 +
drivers/pinctrl/renesas/pfc-r8a77990.c |
Add and use the PLL1 and PLL3 dividers.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
drivers/clk/renesas/clk-rcar-gen3.c | 12
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/renesas/clk-rcar-gen3.c
b/drivers/clk/renesas/clk-rcar-gen3.c
index
Import the R8A77990 and Ebisu DTS from linux-next to get the latest
version. This makes AVB ethernet work in U-Boot since the ethernet
node is now present in DT, as well as GPIOs.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
arch/arm/dts/r8a77990-ebisu.dts | 28 +
1 - 100 of 123 matches
Mail list logo
