From: Andreas Dannenberg
Make the wkup_i2c0 module usable across all stages of U-Boot by adding
the needed definitions including the associated pinmux definitions.
Signed-off-by: Andreas Dannenberg
Signed-off-by: Lokesh Vutla
---
.../dts/k3-j721e-common-proc-board-u-boot.dtsi| 8
From: Andreas Dannenberg
The TI J721E EVM system on module (SOM), the common processor board, and
the associated daughtercards have on-board I2C-based EEPROMs containing
board config data. Use the board detection infrastructure to do the
following:
1) Parse the J721E SOM EEPROM and populate
From: Vignesh Raghavendra
Enable I2C and EEPROM related configs for A72 SPL/U-Boot.
Signed-off-by: Vignesh Raghavendra
Signed-off-by: Andreas Dannenberg
Signed-off-by: Lokesh Vutla
---
configs/j721e_evm_a72_defconfig | 4
1 file changed, 4 insertions(+)
diff --git
Print the board name and ver along with the DT Model.
Signed-off-by: Lokesh Vutla
---
board/ti/j721e/evm.c | 13 +
1 file changed, 13 insertions(+)
diff --git a/board/ti/j721e/evm.c b/board/ti/j721e/evm.c
index d822ac81db..101fe1be4e 100644
--- a/board/ti/j721e/evm.c
+++
From: Andreas Dannenberg
Use dm_i2c_probe() rather than i2c_get_chip() when trying to access
board-detection EEPROM devices. This has the advantage of more gracefully
handling the case when the EEPROM is not present by allowing to exit the
function early rather than failing and outputting an
This series enable I2C and EEPROM support on J721e common processor
board.
Logs: https://pastebin.ubuntu.com/p/6YZtmZT9vQ/
Andreas Dannenberg (3):
ti: common: board_detect: Handle EEPROM probe more gracefully
board: ti: j721e: Use EEPROM-based board detection
arm64: dts:
út 17. 12. 2019 v 14:47 odesílatel Michal Simek
napsal:
>
> From: T Karthik Reddy
>
> Emmc boot devcie is mounted to mmc@ff16 controller on zynqmp.
> Detect mmc alias at run time for setting up proper boot_targets
> sequence instead of setting boot_targets manually.
> Removed setting
This patch series adds basic fastboot support for MediaTek MT8518 EMMC boards,
including musb-new structure for gadget driver and fastboot related configs.
mingming lee (6):
usb: musb-new: mt85xx: add musb-new gadget driver.
ARM: Mediatek: Add board_late_init to init usb gadget driver
Using musb-new structure for mt85xx gadget driver.
Add gadget driver dts for mt8518 SoCs.
Signed-off-by: mingming lee
---
arch/arm/dts/mt8518.dtsi | 13 ++
drivers/usb/musb-new/Kconfig | 11 +-
drivers/usb/musb-new/Makefile | 1 +
drivers/usb/musb-new/mt85xx.c | 417
set common fastboot variables for mt8518
Signed-off-by: mingming lee
---
include/configs/mt8518.h | 10 ++
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/include/configs/mt8518.h b/include/configs/mt8518.h
index 8906245a62..9bc9c04e66 100644
--- a/include/configs/mt8518.h
This patch includes the following:
1. Add fastboot command to erase the whole EMMC_USER
2. Add fastboot command to flash image at EMMC_BOOT1
3. Add fastboot command to erase the whole EMMC_BOOT1
4. Enale CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT for mt8518
Signed-off-by: mingming lee
---
Enable board_late_init and usb gadget for mt8518
Signed-off-by: mingming lee
---
configs/mt8518_ap1_emmc_defconfig | 10 ++
1 file changed, 10 insertions(+)
diff --git a/configs/mt8518_ap1_emmc_defconfig
b/configs/mt8518_ap1_emmc_defconfig
index dd42076f4d..9857b7b776 100644
---
Enable EFI module.
Enable fastboot.
Signed-off-by: mingming lee
---
configs/mt8518_ap1_emmc_defconfig | 13 -
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/configs/mt8518_ap1_emmc_defconfig
b/configs/mt8518_ap1_emmc_defconfig
index 9857b7b776..714fd8e087 100644
---
Add board_late_init function to init usb gadget driver for mt8518
Signed-off-by: mingming lee
---
board/mediatek/mt8518/mt8518_ap1.c | 18 ++
1 file changed, 18 insertions(+)
diff --git a/board/mediatek/mt8518/mt8518_ap1.c
b/board/mediatek/mt8518/mt8518_ap1.c
index
Hello, I'm booting kernel on my board with u-boot ramdisk image which is
39.8 MB. It boots successfully. When I try another u-boot image which has
74.7 MB size, load adress of ramdisk changing and its giving
'Loading Ramdisk to ff8c, end 03fffd63... Bad Trap at PC:7fef8cb0'
and board hangs
> Subject: Re: [PATCH 00/22] imx: add i.MX8MP support
>
> Hi Peng,
>
> On Mon, Dec 30, 2019 at 10:31 PM Peng Fan wrote:
>
> > This is no public AT-F and ddr firmware for this board now. We are at
> > early stage currently. until NXP software release, there will be public AT-F
> and ddr
> Subject: ATF + u-boot imx8mm combination
>
> HI all
>
> I'm trying to work on some imx8mm mainline but I understand that I miss
> some of the information needed. I would like to work and play with power
> domain. Can I know where to find all the information to build a version with a
> valid
On Sat, Jan 4, 2020 at 6:48 PM Stephan Gerhold wrote:
> The ST-Ericsson U8500 SoC has been used in mass-production for
> some Android smartphones released around 2012.
> In particular, Samsung has released more than 5 different
> smartphones based on U8500, e.g.
>
> - Samsung Galaxy S III mini
Hi Lukasz,
> Subject: Re: [PATCH 20/22] clk: imx: add i.MX8MP clk driver
>
> Hi Peng,
>
> > Add i.MX8MP clk driver for i.MX8MP CLK driver model usage
> >
> > Signed-off-by: Peng Fan
> > Cc: Lukasz Majewski
> > ---
> >
> > V1:
> > To align with linux coding style, the 80 chars warning is not
On Sat, Jan 4, 2020 at 6:48 PM Stephan Gerhold wrote:
> Add myself as maintainer for ST-Ericsson U8500 SoC to MAINTAINERS.
> Linus Walleij usually reviews all Ux500 related patches,
> so add him as a reviewer.
>
> Cc: Linus Walleij
> Signed-off-by: Stephan Gerhold
Reviewed-by: Linus Walleij
On Sat, Jan 4, 2020 at 6:48 PM Stephan Gerhold wrote:
> The NovaThor U8500 SoC was released by ST-Ericsson in 2011.
> It was used for some development boards like the CALAO Systems
> Snowball SBC, but mass production was primarily for Android
> smartphones like the Samsung Galaxy S III mini.
>
>
On Sat, Jan 4, 2020 at 6:48 PM Stephan Gerhold wrote:
> from
> https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git/
> tag "ux500-armsoc-v5.6-2"
> commit 224bf0fe7292 ("ARM: dts: ux500: samsung-golden: Add Bluetooth")
>
> (queued for merge in Linux 5.6)
>
> Signed-off-by:
On Sat, Jan 4, 2020 at 6:48 PM Stephan Gerhold wrote:
> The Nomadik Multi Timer Unit (MTU) provides 4 decrementing
> free-running timers. It is used in ST-Ericsson Ux500 SoCs.
>
> The driver uses the first timer to implement UCLASS_TIMER.
>
> Signed-off-by: Stephan Gerhold
Reviewed-by: Linus
Heinrich,
On Fri, Jan 03, 2020 at 01:17:05AM +0100, Heinrich Schuchardt wrote:
> On 4/19/19 5:22 AM, AKASHI Takahiro wrote:
> >There are several reasons that I want to rework/refactor bootefi command
> >as well as bootmgr:
> >* Some previous commits on bootefi.c have made the code complicated
> >
The Allwinner H6 SoC uses a quite different memory map, also changes the
clocks quite a bit. This requires some changes to the SPL SPI routine,
which hardcodes these values so far.
Using the just introduced helper functions to determine base address
and SPI controller generation, we can cover
So far on all supported Allwinner SoCs we find the old generation SPI
controller always at address 0x1c05000, and the new generation one at
0x1c68000. However the Allwinner R40 SoC has a new generation SPI at
the old address, and the H6 uses a completely different address.
So split off the base
The Pine H64 board comes with some onboard SPI flash chip, which is
perfect for loading SPL, ATF and U-Boot proper from there.
Enable the functionality in the defconfig, so that we use sunxi-fel to
transfer a bootable image to the NOR flash.
Signed-off-by: Andre Przywara
---
Simon,
On Fri, Dec 27, 2019 at 07:26:40PM -0700, Simon Glass wrote:
> On Tue, 17 Dec 2019 at 01:53, AKASHI Takahiro
> wrote:
> >
> > In the current implementation of FIT_SIGNATURE, five parameters for
> > a RSA public key are required while only two of them are essential.
> > (See rsa-mod-exp.h
Now that we can easily select an SoC specific SPI0 base address, adding
support for the Allwinner R40 is fairly trivial:
We set the base address, add this SoC to the ones that use PC23 and
enable it in Kconfig.
This allows booting from SPI flash on R40 boards.
Tested on a Bananapi M2 Berry with
This series enables the SPI booting feature for Allwinner R40 and H6
SoCs. To achieve this, we enable our spl_spi_sunxi.c driver to deal
with those two SoCs. The R40 is pretty straightforward, as it just needs
its base address adjusted. This is prepared in patch 2/6 and finalised
in patch 4/6.
For
So far we were using the CONFIG_SUNXI_GEN_SUN6I symbol to select between
the two SPI controller generations used on Allwinner SoCs. This is a
convenience symbol to roughly differentiate between "older" and "newer"
generation of SoCs.
The H6 SoCs is the newest SoC so far, but is sufficiently
For Allwinner SoCs the CONFIG_SYS_SPI_U_BOOT_OFFS value is not really a
board choice: The boot ROM only loads the SPL from offset 0 of the SPI
NOR flash, and loads at most 32KB. This is a similar situation as on MMC,
so consequently we create our "joint" image (SPL + U-Boot proper) with
that 32KB
For DM_ETH support , it's require to disable this config.
When this config is enable, This generate a error with spl in linker script
Signed-off-by: Joris Offouga
---
configs/pico-imx7d_bl33_defconfig | 3 ---
1 file changed, 3 deletions(-)
diff --git a/configs/pico-imx7d_bl33_defconfig
Signed-off-by: Joris Offouga
---
Change v1 -> v2
Disable usb ethernet support with patch : pico-imx7d: Disable USB_ETHER
support for bl33
board/technexion/pico-imx7d/pico-imx7d.c | 46
configs/pico-dwarf-imx7d_defconfig | 5 +++
On Wed, Jan 1, 2020 at 4:16 PM Heinrich Schuchardt wrote:
>
> When printing unsigned numbers use %u.
>
> Signed-off-by: Heinrich Schuchardt
Acked-by: Joe Hershberger
Hi,
With below nits, I have provided the Reviewed-by/Tested-by signatures.
On Tue, Dec 24, 2019 at 09:54:49PM +0200, Sam Protsenko wrote:
> This command can be used to extract fields and image payloads from
> Android Boot Image. It can be used for example to implement boot flow
> where dtb is
On Sun, Jan 5, 2020 at 7:32 AM Stefano Babic wrote:
>
> On 04/01/20 13:03, Joris Offouga wrote:
> > Hi Stefano,
> >
> > Sorry for the delay,
> >
> > Le 28/12/2019 à 12:31, Stefano Babic a écrit :
> >> Hi Joris,
> >>
> >>
> >>
> >> On 08/12/19 18:02, Joris Offouga wrote:
> >>> Signed-off-by: Joris
Add an arch-specific handoff header so that we can use the HANDOFF feature
on arm devices.
Signed-off-by: Michael Trimarchi
---
arch/arm/include/asm/handoff.h | 21 +
1 file changed, 21 insertions(+)
create mode 100644 arch/arm/include/asm/handoff.h
diff --git
Toshiba recently launched new revisions of their serial SLC NAND series.
TC58CVG2S0HRAIJ is a refresh of previous series with minor improvements.
Basic parameters are same so lets add support for this new revision.
Datasheet:
https://business.kioxia.com/info/docget.jsp?did=58601=TC58CVG2S0HRAIJ
Linux has good support for Toshiba SPI-NAND, so lets import it.
Signed-off-by: Robert Marko
Tested-by: Luka Kovacic
Cc: Luka Perkov
---
drivers/mtd/nand/spi/Makefile | 2 +-
drivers/mtd/nand/spi/core.c| 1 +
drivers/mtd/nand/spi/toshiba.c | 190 +
On Fri, Jan 03, 2020 at 01:17:07PM -0500, Tom Rini wrote:
> Adam Ford reports that this change breaks booting on da850-evm and
> Bartosz Golaszewski agrees that with the impending release we should
> revert the change for now. With that noted:
>
> This reverts commit
Hi Joris,
On 04/01/20 13:03, Joris Offouga wrote:
> Hi Stefano,
>
> Sorry for the delay,
>
> Le 28/12/2019 à 12:31, Stefano Babic a écrit :
>> Hi Joris,
>>
>>
>>
>> On 08/12/19 18:02, Joris Offouga wrote:
>>> Signed-off-by: Joris Offouga
>>> ---
>>> board/technexion/pico-imx7d/pico-imx7d.c |
Of all warning status codes up to now only EFI_WARN_DELETE_FAILURE is
defined.
The patch adds the missing definitions for later usage.
Signed-off-by: Heinrich Schuchardt
---
v2
Remove unrelated change
---
include/efi.h | 8 +++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff
43 matches
Mail list logo
