From: Poddar, Sourav sourav.pod...@ti.com
Add QSPI definitions and clock configuration support.
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
Reviewed-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
arch/arm/cpu/armv7/am33xx/clock_am43xx.c |1 +
arch/arm/include/asm/arch-am33xx
From: Poddar, Sourav sourav.pod...@ti.com
Enables support for SPI SPL, QSPI and Spansion serial flash device
on the EVM. Configures pin muxes for QSPI mode.
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
Reviewed-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
board/ti/am43xx/mux.c
From: Poddar, Sourav sourav.pod...@ti.com
Add AM43xx specific changes.
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
Reviewed-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
drivers/spi/ti_qspi.c | 26 +++---
1 files changed, 23 insertions(+), 3 deletions
Sutradharudu Teki jaga...@xilinx.com
---
v1-v2:
- updated commit log with error message.
- Add a FIXME comment in code,
drivers/spi/ti_qspi.c |7 +++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c
index 5666250..dfa5d0c 100644
From: Poddar, Sourav sourav.pod...@ti.com
This shows the log obtained while testing qspi on AM437x board.
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
Reviewed-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
doc/SPI/README.ti_qspi_am43x_test | 76
From: Poddar, Sourav sourav.pod...@ti.com
Enables support for SPI SPL, QSPI and Spansion serial flash device
on the EVM. Configures pin muxes for QSPI mode.
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
Reviewed-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: Fixed warnings
From: Jagannadha Sutradharudu Teki jagannadha.sutradharudu-t...@xilinx.com
From: Poddar, Sourav sourav.pod...@ti.com
Add QSPI definitions and clock configuration support.
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
Reviewed-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: Added
From: Poddar, Sourav sourav.pod...@ti.com
Add AM43xx specific changes.
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
Reviewed-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: Updated commit head, Added review tag
V2: none
drivers/spi/ti_qspi.c | 26 +++---
1
Sutradharudu Teki jaga...@xilinx.com
---
V3: Modified commit head, Added review tag
v1-v2:
- updated commit log with error message.
- Add a FIXME comment in code,
drivers/spi/ti_qspi.c |7 +++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/drivers/spi/ti_qspi.c b/drivers/spi
From: Poddar, Sourav sourav.pod...@ti.com
This shows the log obtained while testing qspi on AM437x board.
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
Reviewed-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: Added review tag
V2: none
doc/SPI/README.ti_qspi_am43x_test | 76
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
Cc: Masahiro Yamada yamad...@jp.panasonic.com
---
drivers/mtd/spi/Makefile | 11 +--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
index 26483a2..fd8f8a4
Cleanup on memory configuration options:
- Add comment
- Re-order configs
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: none
V2: none
include/configs/zynq.h | 27 ++-
1 file changed, 14 insertions(+), 13 deletions(-)
diff --git a/include/configs
Enabled fit_format_{error,warning}()
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: none
V2: none
include/configs/zynq.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/zynq.h b/include/configs/zynq.h
index 82ec826..6019c4a 100644
--- a/include
This enabled Boot FreeBSD/vxWorks from an ELF image support
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: none
V2: none
include/configs/zynq.h | 7 +++
1 file changed, 7 insertions(+)
diff --git a/include/configs/zynq.h b/include/configs/zynq.h
index 6019c4a
Changed Env. Sector size from 0x1 to 128Kb
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: none
V2: none
include/configs/zynq-common.h | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
make DEVICE_TREE=zynq-zed
Enabled CONFIG_OF_SEPARATE for building dtb separately.
There is a new binary called u-boot-dtb.bin which is a u-boot
with devicetree supported.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: none
V2: none
arch/arm/dts/zynq-7000.dtsi | 13
Sutradharudu Teki jaga...@xilinx.com
---
V3: Removed CONFIG_SPI_ZYNQ
V2: none
boards.cfg | 1 +
include/configs/zynq_microzed.h | 25 +
2 files changed, 26 insertions(+)
create mode 100644 include/configs/zynq_microzed.h
diff --git a/boards.cfg b/boards.cfg
/MMC card cage
- 10/100/1000 Ethernet
- USB-UART
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: Removed CONFIG_SPI_ZYNQ
V2: none
boards.cfg | 1 +
include/configs/zynq_zc770.h | 30 ++
2 files changed, 31 insertions(+)
create
These changes are from u-boot-xlnx.git repo from git.xilinx.com
This repo is well tested on xilinx zynq platform, hence pushing
the same on upstream.
Excluded qspi and nand changes from previous series.
--
Thanks,
Jagan.
Jagannadha Sutradharudu Teki (29):
zynq: Enable CONFIG_FIT_VERBOSE
Defined default env. for autoboot FIT image from
respective boot devices.
Default settings:
fit_image=fit.itb
load_addr=0x200
fit_size=0x80
flash_off=0x10
nor_flash_off=0xE210
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: none
V2: none
include/configs
Zynq uart controller support two serial ports like
CONFIG_ZYNQ_SERIAL_UART0 and CONFIG_ZYNQ_SERIAL_UART1
enabled both so-that the respective board will define
these macros based on their usage.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: none
V2: none
include/configs
CONFIG_FIT_SIGNATURE - signature node support in FIT image
CONFIG_RSA - RSA lib support
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: none
V2: none
include/configs/zynq-common.h | 4
1 file changed, 4 insertions(+)
diff --git a/include/configs/zynq-common.h b
Updated doc/README.zynq to current status.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: Updated acc to current status
V2: none
doc/README.zynq | 26 ++
1 file changed, 18 insertions(+), 8 deletions(-)
diff --git a/doc/README.zynq b/doc
GPIO dummy routines are required for fdt build, may be removed
these dependencies once the u-boot fdt is fully optimized.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: none
V2: none
arch/arm/include/asm/arch-zynq/gpio.h | 25 +
1 file changed, 25
Zynq ethernet controller support two GEM's like
CONFIG_ZYNQ_GEM0 and CONFIG_ZYNQ_GEM1 enabled
both so-that the respective board will define
these macros based on their usage.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: none
V2: none
include/configs/zynq.h | 16
- Enable cache command
- Turn-off L2 cache
- Turn-on D-cache
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: none
V2: none
include/configs/zynq.h | 10 ++
1 file changed, 10 insertions(+)
diff --git a/include/configs/zynq.h b/include/configs/zynq.h
index c8ab06f
CONFIG_SYS_SDRAM_SIZE is specific to a board hence moved
to specific pre-config board files.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: none
V2: none
include/configs/zynq-common.h | 1 -
include/configs/zynq_zc70x.h | 2 ++
include/configs/zynq_zed.h| 2 ++
3
Defined TEXT_BASE for u-boot starts from 0x400
w.r.t zynq memory-map.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: none
V2: none
include/configs/zynq-common.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/configs/zynq-common.h b
Defined CONFIG_ENV_OVERWRITE, which allow to
overwrite serial baudrate and ethaddr.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: none
V2: none
include/configs/zynq-common.h | 3 +++
1 file changed, 3 insertions(+)
diff --git a/include/configs/zynq-common.h b/include
Information on zynq u-boot about
- zynq boards
- mainline status
- TODO
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: none
V2: none
doc/README.zynq | 60 +
1 file changed, 60 insertions(+)
create mode 100644 doc
/products/boards-and-kits/EK-Z7-ZC706-G.htm
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: Removed CONFIG_SPI_ZYNQ
V2: none
boards.cfg| 1 +
include/configs/zynq-common.h | 6 --
include/configs/zynq_zc70x.h | 25 +
3 files
- Supports 4 analog inputs
- 2 Differential / 4 Single-ended
Debug:
- On-board USB JTAG programming port
- ARM Debug Access Port (DAP)
For more info - http://zedboard.org/product/zedboard
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: Removed CONFIG_SPI_ZYNQ
V2: none
Added support to find the bootmodes by reading
slcr bootmode register. this can be helpful to
autoboot the configurations w.r.t a specified bootmode.
Added this functionality on board_late_init as it's not
needed for normal initializtion part.
Signed-off-by: Jagannadha Sutradharudu Teki jaga
This patch adds initial dts support for supported
zynq boards.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: Removed zynq-zc770-xm011.dts file
V2: none
board/xilinx/dts/zynq-microzed.dts| 14 ++
board/xilinx/dts/zynq-zc702.dts | 14
Sutradharudu Teki jaga...@xilinx.com
---
V3: Removed CONFIG_SPI_ZYNQ
V2: none
boards.cfg | 1 +
include/configs/zynq_zc770.h | 5 +
2 files changed, 6 insertions(+)
diff --git a/boards.cfg b/boards.cfg
index e4471b6..1c7346c 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -358,6
zynq.h - zynq-common.h, zynq-common is Common
configuration options for all Zynq boards.
zynq.h is no longer exists hense removed from boards.cfg
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: none
V2: none
boards.cfg| 2 --
include
Adds configurations for Catalyst 24WC08 EEPROM, which
is present on the zynq boards.
Enable EEPROM support for zc70x boards.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: none
V2: none
include/configs/zynq-common.h | 10 ++
include/configs/zynq_zc70x.h | 1
Last 128Kb sector of 1Mb flash is defined as u-boot
environment partition.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: none
V2: none
include/configs/zynq-common.h | 12 +++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/include/configs/zynq
ZC770 is a complete development board based on the Xilinx Zynq-7000
All Programmable SoC, similar to ZC70x board but which has four
different daughter cards, like XM010, XM011, XM012 and XM013
ZC770 XM012:
- 1GB DDR3
- 64MiB Numonyx NOR flash
- USB-UART
Signed-off-by: Jagannadha Sutradharudu
Cleanups mostly on:
- Add comments
- Re-order configs
- Remove #define CONFIG_ZYNQ_SDHCI
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: none
V2: none
include/configs/zynq.h | 76 ++
1 file changed, 39 insertions(+), 37
Hi Tom,
Small PR - addons on one spi driver, others and few fixes.
Thanks,
Jagan.
The following changes since commit f3bf212abc4139f12b472e97c1992ab32671b609:
serial_sh: add support for SH7753 (2013-12-18 16:50:00 +0900)
are available in the git repository at:
first detects the revision id of the underlying
chip, and then switch to the corresponding software
control routines.
Signed-off-by: Kuo-Jung Su dant...@faraday-tech.com
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
CC: Tom Rini tr...@ti.com
---
Changes for v7:
- Fixed some
Cleanup on miscellaneous configurable options:
- Rename SYS_PROMPT as zynq-uboot
- Add comment
- Re-order configs
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V3: none
V2: Removed CONFIG_SYS_PROMPT_HUSH_PS2
include/configs/zynq.h | 19 ++-
1 file changed
Cleanup on memory configuration options:
- Add comment
- Re-order configs
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: none
include/configs/zynq.h | 27 ++-
1 file changed, 14 insertions(+), 13 deletions(-)
diff --git a/include/configs/zynq.h b
Enabled fit_format_{error,warning}()
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: none
include/configs/zynq.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/zynq.h b/include/configs/zynq.h
index 82ec826..6019c4a 100644
--- a/include/configs
These changes are from u-boot-xlnx.git repo from git.xilinx.com
This repo is well tested on xilinx zynq platform, hence pushing
the same on upstream.
--
Thanks,
Jagan.
Jagannadha Sutradharudu Teki (35):
zynq: Enable CONFIG_FIT_VERBOSE
zynq: Enable Boot FreeBSD/vxWorks
zynq: Cleanup
Cleanup on miscellaneous configurable options:
- Rename SYS_PROMPT as zynq-uboot
- Add comment
- Re-order configs
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: Removed CONFIG_SYS_PROMPT_HUSH_PS2
include/configs/zynq.h | 19 ++-
1 file changed, 10
Added support to find the bootmodes by reading
slcr bootmode register. this can be helpful to
autoboot the configurations w.r.t a specified bootmode.
Added this functionality on board_late_init as it's not
needed for normal initializtion part.
Signed-off-by: Jagannadha Sutradharudu Teki jaga
Defined TEXT_BASE for u-boot starts from 0x400
w.r.t zynq memory-map.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: none
include/configs/zynq-common.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/configs/zynq-common.h b/include/configs
This enabled Boot FreeBSD/vxWorks from an ELF image support
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: none
include/configs/zynq.h | 7 +++
1 file changed, 7 insertions(+)
diff --git a/include/configs/zynq.h b/include/configs/zynq.h
index 6019c4a..0492818 100644
CONFIG_SYS_SDRAM_SIZE is specific to a board hence moved
to specific pre-config board files.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: Moved CONFIG_SYS_SDRAM_SIZE pre-board configs
include/configs/zynq-common.h | 1 -
include/configs/zynq_zc70x.h | 2 ++
include
Sutradharudu Teki jaga...@xilinx.com
---
V2: Updated domain name in mail ids'
boards.cfg | 1 +
include/configs/zynq_microzed.h | 26 ++
2 files changed, 27 insertions(+)
create mode 100644 include/configs/zynq_microzed.h
diff --git a/boards.cfg b/boards.cfg
Changed Env. Sector size from 0x1 to 128Kb
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: none
include/configs/zynq-common.h | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index
GPIO dummy routines are required for fdt build, may be removed
these dependencies once the u-boot fdt is fully optimized.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: none
arch/arm/include/asm/arch-zynq/gpio.h | 25 +
1 file changed, 25
Zynq uart controller support two serial ports like
CONFIG_ZYNQ_SERIAL_UART0 and CONFIG_ZYNQ_SERIAL_UART1
enabled both so-that the respective board will define
these macros based on their usage.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: none
include/configs/zynq.h
Sutradharudu Teki jaga...@xilinx.com
---
V2: Updated domain name in mail ids'
boards.cfg | 1 +
include/configs/zynq_zc770.h | 4
2 files changed, 5 insertions(+)
diff --git a/boards.cfg b/boards.cfg
index 2dcfce5..66d8724 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -358,6 +358,7
/100/1000 Ethernet
- USB-UART
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: Updated domain name in mail ids'
boards.cfg | 1 +
include/configs/zynq_zc770.h | 30 ++
2 files changed, 31 insertions(+)
create mode 100644 include
Cleanups mostly on:
- Add comments
- Re-order configs
- Remove #define CONFIG_ZYNQ_SDHCI
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: none
include/configs/zynq.h | 76 ++
1 file changed, 39 insertions(+), 37 deletions
Added support for Zynq Nand controller driver.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
CC: Marek Vasut ma...@denx.de
Cc: Scott Wood scottw...@freescale.com
---
V2: Fixed issues pointed by Scott
arch/arm/include/asm/arch-zynq/hardware.h |2 +
drivers/mtd/nand/Makefile
- Supports 4 analog inputs
- 2 Differential / 4 Single-ended
Debug:
- On-board USB JTAG programming port
- ARM Debug Access Port (DAP)
For more info - http://zedboard.org/product/zedboard
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: Updated domain name in mail ids
Defined CONFIG_NAND_ZYNQ for enabling zynq nand controller with
onfi detection support.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
CC: Marek Vasut ma...@denx.de
Cc: Scott Wood scottw...@freescale.com
---
README| 4
include/configs/zynq-common.h
Zynq ethernet controller support two GEM's like
CONFIG_ZYNQ_GEM0 and CONFIG_ZYNQ_GEM1 enabled
both so-that the respective board will define
these macros based on their usage.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: none
include/configs/zynq.h | 16
Enabled bank/extn' addr register support for accessing
16Mbyte flash devices.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: none
include/configs/zynq-common.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/zynq-common.h b/include/configs/zynq
Updated doc/README.zynq to current status.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: none
doc/README.zynq | 29 +++--
1 file changed, 19 insertions(+), 10 deletions(-)
diff --git a/doc/README.zynq b/doc/README.zynq
index 7cb87e3..732ef3f
make DEVICE_TREE=zynq-zed
Enabled CONFIG_OF_SEPARATE for building dtb separately.
There is a new binary called u-boot-dtb.bin which is a u-boot
with devicetree supported.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: none
arch/arm/dts/zynq-7000.dtsi | 13
- Enable cache command
- Turn-off L2 cache
- Turn-on D-cache
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: none
include/configs/zynq.h | 10 ++
1 file changed, 10 insertions(+)
diff --git a/include/configs/zynq.h b/include/configs/zynq.h
index c8ab06f..6e545e5
CONFIG_FIT_SIGNATURE - signature node support in FIT image
CONFIG_RSA - RSA lib support
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: none
include/configs/zynq-common.h | 4
1 file changed, 4 insertions(+)
diff --git a/include/configs/zynq-common.h b/include
Added support to find the bootmodes by reading
slcr bootmode register. this can be helpful to
autoboot the configurations w.r.t a specified bootmode.
Added this functionality on board_late_init as it's not
needed for normal initializtion part.
Signed-off-by: Jagannadha Sutradharudu Teki jaga
ZC770 is a complete development board based on the Xilinx Zynq-7000
All Programmable SoC, similar to ZC70x board but which has four
different daughter cards, like XM010, XM011, XM012 and XM013
ZC770 XM012:
- 1GB DDR3
- 64MiB Numonyx NOR flash
- USB-UART
Signed-off-by: Jagannadha Sutradharudu
This patch adds initial dts support for supported
zynq boards.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: none
board/xilinx/dts/zynq-microzed.dts| 14 ++
board/xilinx/dts/zynq-zc702.dts | 14 ++
board/xilinx/dts/zynq-zc706.dts
Adds configurations for Catalyst 24WC08 EEPROM, which
is present on the zynq boards.
Enable EEPROM support for zc70x boards.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: none
include/configs/zynq-common.h | 10 ++
include/configs/zynq_zc70x.h | 1 +
2 files
zynq.h - zynq-common.h, zynq-common is Common
configuration options for all Zynq boards.
zynq.h is no longer exists hense removed from boards.cfg
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: none
boards.cfg| 2 --
include/configs
Defined default env. for autoboot FIT image from
respective boot devices.
Default settings:
fit_image=fit.itb
load_addr=0x200
fit_size=0x80
flash_off=0x10
nor_flash_off=0xE210
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: none
include/configs/zynq
/products/boards-and-kits/EK-Z7-ZC706-G.htm
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: Updated domain name in mail ids'
boards.cfg| 1 +
include/configs/zynq-common.h | 9 -
include/configs/zynq_zc70x.h | 26 ++
3
Defined CONFIG_ENV_OVERWRITE, which allow to
overwrite serial baudrate and ethaddr.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: none
include/configs/zynq-common.h | 3 +++
1 file changed, 3 insertions(+)
diff --git a/include/configs/zynq-common.h b/include/configs
Sutradharudu Teki jaga...@xilinx.com
---
V2: Updated domain name in mail ids'
boards.cfg | 1 +
include/configs/zynq_zc770.h | 6 ++
2 files changed, 7 insertions(+)
diff --git a/boards.cfg b/boards.cfg
index 11c7f9d..1687169 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -358,6
Zynq qspi controller driver supports single bus
with singe chipselect.
Zynq qspi can be operated in below connection modes
- single qspi
- dual qspi, with dual stacked
- dual qspi, with dual parallel
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: Fixed few issues
arch
Last 128Kb sector of 1Mb flash is defined as u-boot
environment partition.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: none
include/configs/zynq-common.h | 16 +++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/include/configs/zynq-common.h
Tested qspi on zynq board with stmicro, spansion and winbond
flashes by enabling CONFIG_ZYNQ_QSPI.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V2: none
include/configs/zynq-common.h | 10 ++
1 file changed, 10 insertions(+)
diff --git a/include/configs/zynq
)
- Use TX BD status intead of txsr status checks.
Signed-off-by: Srikanth Thokala stho...@xilinx.com
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
drivers/net/zynq_gem.c | 82
zynq.h - zynq-common.h, zynq-common is Common
configuration options for all Zynq boards.
zynq.h is no longer exists hense removed from boards.cfg
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
boards.cfg| 2 --
include/configs/{zynq.h = zynq
Added PHYS_SDRAM_1_SIZE config for respective board
DDR size.
zc70x - 1GB
zed - 512MB
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
include/configs/zynq-common.h | 2 +-
include/configs/zynq_zc70x.h | 2 ++
include/configs/zynq_zed.h| 2 ++
3 files changed, 5
These changes are from u-boot-xlnx.git repo from git.xilinx.com
This repo is well tested on xilinx zynq platform, hence pushing
the same on upstream.
--
Thanks,
Jagan.
Jagannadha Sutradharudu Teki (34):
zynq: Enable CONFIG_FIT_VERBOSE
zynq: Enable Boot FreeBSD/vxWorks
zynq: Cleanup
Cleanup on miscellaneous configurable options:
- Rename SYS_PROMPT as zynq-uboot
- Add comment
- Re-order configs
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
include/configs/zynq.h | 20 +++-
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git
Cleanups mostly on:
- Add comments
- Re-order configs
- Remove #define CONFIG_ZYNQ_SDHCI
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
include/configs/zynq.h | 76 ++
1 file changed, 39 insertions(+), 37 deletions(-)
diff
/100/1000 Ethernet
- USB-UART
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
boards.cfg | 1 +
include/configs/zynq_zc770.h | 30 ++
2 files changed, 31 insertions(+)
create mode 100644 include/configs/zynq_zc770.h
diff --git
Enabled fit_format_{error,warning}()
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
include/configs/zynq.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/zynq.h b/include/configs/zynq.h
index 4c6e6e8..a6dbd0e 100644
--- a/include/configs/zynq.h
+++ b
Changed Env. Sector size from 0x1 to 128Kb
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
include/configs/zynq-common.h | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 9586261
- Enable cache command
- Turn-off L2 cache
- Turn-on D-cache
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
include/configs/zynq.h | 10 ++
1 file changed, 10 insertions(+)
diff --git a/include/configs/zynq.h b/include/configs/zynq.h
index abeb2da..f32008b 100644
Cleanup on memory configuration options:
- Add comment
- Re-order configs
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
include/configs/zynq.h | 27 ++-
1 file changed, 14 insertions(+), 13 deletions(-)
diff --git a/include/configs/zynq.h b/include
Enabled bank/extn' addr register support for accessing
16Mbyte flash devices.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
include/configs/zynq-common.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index
Zynq ethernet controller support two GEM's like
CONFIG_ZYNQ_GEM0 and CONFIG_ZYNQ_GEM1 enabled
both so-that the respective board will define
these macros based on their usage.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
include/configs/zynq.h | 16
1 file
This enabled Boot FreeBSD/vxWorks from an ELF image support
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
include/configs/zynq.h | 7 +++
1 file changed, 7 insertions(+)
diff --git a/include/configs/zynq.h b/include/configs/zynq.h
index a6dbd0e..6ac1350 100644
Zynq qspi controller driver supports single bus
with singe chipselect.
Zynq qspi can be operated in below connection modes
- single qspi
- dual qspi, with dual stacked
- dual qspi, with dual parallel
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
arch/arm/include/asm/arch
Zynq uart controller support two serial ports like
CONFIG_ZYNQ_SERIAL_UART0 and CONFIG_ZYNQ_SERIAL_UART1
enabled both so-that the respective board will define
these macros based on their usage.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
include/configs/zynq.h | 20
make DEVICE_TREE=zynq-zed
Enabled CONFIG_OF_SEPARATE for building dtb separately.
There is a new binary called u-boot-dtb.bin which is a u-boot
with devicetree supported.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
arch/arm/dts/zynq-7000.dtsi | 13 +
board
GPIO dummy routines are required for fdt build, may be removed
these dependencies once the u-boot fdt is fully optimized.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
arch/arm/include/asm/arch-zynq/gpio.h | 25 +
1 file changed, 25 insertions
CONFIG_FIT_SIGNATURE - signature node support in FIT image
CONFIG_RSA - RSA lib support
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
include/configs/zynq-common.h | 4
1 file changed, 4 insertions(+)
diff --git a/include/configs/zynq-common.h b/include/configs/zynq
Last 128Kb sector of 1Mb flash is defined as u-boot
environment partition.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
include/configs/zynq-common.h | 16 +++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/include/configs/zynq-common.h b/include
Defined default ethaddr for zynq GEM as 00:0a:35:00:01:22
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
include/configs/zynq-common.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 1a907a1..52c6f52
201 - 300 of 699 matches
Mail list logo