Hi,
I am trying to setup an eMMC chip's user data area fully as enhanced
type.
Well, trying is probably wrong because its an OTP action and therefore I
try to figure out the correct command on first try :-)
U-Boot's "mmc hwpartition" command should be able to do this, but how?
Where can I find
Hi,
On 01/13/2015 03:16 AM, Huan Wang wrote:
> Hi,
>
>> -Original Message-----
>> From: Matthias Fuchs [mailto:matthias.fu...@esd.eu]
>> Sent: Tuesday, January 13, 2015 5:34 AM
>> To: u-boot@lists.denx.de
>> Cc: Wang Huan-B18965; Matthias Fuchs
>>
Signed-off-by: Matthias Fuchs
---
arch/powerpc/cpu/ppc4xx/Kconfig |4 -
board/esd/pci405/Kconfig| 12 -
board/esd/pci405/MAINTAINERS|6 -
board/esd/pci405/Makefile |9 -
board/esd/pci405/cmd_pci405.c | 97 ---
board/esd/pci405/flash.c| 85 ---
board
Signed-off-by: Matthias Fuchs
---
arch/powerpc/cpu/ppc4xx/Kconfig |4 -
board/g2000/Kconfig |9 -
board/g2000/MAINTAINERS |6 -
board/g2000/Makefile|8 -
board/g2000/g2000.c | 245 -
board/g2000/strataflash.c | 774
only keep CPCI4052
Signed-off-by: Matthias Fuchs
---
arch/powerpc/cpu/ppc4xx/Kconfig |9 -
board/esd/cpci405/Kconfig | 39
configs/CPCI405AB_defconfig |3 -
configs/CPCI405DT_defconfig |3 -
configs/CPCI405_defconfig |3 -
doc/README.scrapyard
Signed-off-by: Matthias Fuchs
---
include/configs/VOM405.h |2 ++
1 file changed, 2 insertions(+)
diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h
index c06897b..e229256 100644
--- a/include/configs/VOM405.h
+++ b/include/configs/VOM405.h
@@ -19,6 +19,8 @@
#define
Signed-off-by: Matthias Fuchs
---
include/configs/PMC405DE.h |2 ++
1 file changed, 2 insertions(+)
diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h
index 94b9547..f7d28e3 100644
--- a/include/configs/PMC405DE.h
+++ b/include/configs/PMC405DE.h
@@ -12,6 +12,8 @@
#define
Signed-off-by: Matthias Fuchs
---
arch/powerpc/cpu/ppc4xx/Kconfig |4 -
board/esd/ocrtc/Kconfig | 12 --
board/esd/ocrtc/MAINTAINERS |6 -
board/esd/ocrtc/Makefile|8 --
board/esd/ocrtc/cmd_ocrtc.c | 68 --
board/esd/ocrtc/flash.c | 140
Signed-off-by: Matthias Fuchs
---
include/configs/PLU405.h |2 ++
1 file changed, 2 insertions(+)
diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index 8705161..a236e11 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -21,6 +21,8 @@
#define
Signed-off-by: Matthias Fuchs
---
arch/powerpc/cpu/ppc4xx/Kconfig |4 -
board/esd/cms700/Kconfig| 12 --
board/esd/cms700/MAINTAINERS|6 -
board/esd/cms700/Makefile | 16 --
board/esd/cms700/cms700.c | 192
board/esd/cms700/flash.c
Signed-off-by: Matthias Fuchs
---
include/configs/CPCI2DP.h |2 ++
1 file changed, 2 insertions(+)
diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h
index 05106cd..845ed81 100644
--- a/include/configs/CPCI2DP.h
+++ b/include/configs/CPCI2DP.h
@@ -20,6 +20,8 @@
#define
Signed-off-by: Matthias Fuchs
---
arch/powerpc/cpu/ppc4xx/Kconfig |4 -
board/esd/hub405/Kconfig| 12 --
board/esd/hub405/MAINTAINERS|6 -
board/esd/hub405/Makefile | 10 --
board/esd/hub405/flash.c| 85 --
board/esd/hub405/hub405.c | 208
Signed-off-by: Matthias Fuchs
---
arch/powerpc/cpu/ppc4xx/Kconfig |4 -
board/esd/du405/Kconfig | 12 -
board/esd/du405/MAINTAINERS |6 -
board/esd/du405/Makefile|8 -
board/esd/du405/du405.c | 187 --
board/esd/du405/du405.h | 28 -
board
Signed-off-by: Matthias Fuchs
---
arch/powerpc/cpu/ppc4xx/Kconfig |4 -
board/esd/pmc405/Kconfig| 12 --
board/esd/pmc405/MAINTAINERS|6 -
board/esd/pmc405/Makefile | 13 --
board/esd/pmc405/pmc405.c | 142 -
configs/PMC405_defconfig
Signed-off-by: Matthias Fuchs
---
arch/powerpc/cpu/ppc4xx/Kconfig |4 -
board/esd/du440/Kconfig | 12 -
board/esd/du440/MAINTAINERS |6 -
board/esd/du440/Makefile|9 -
board/esd/du440/config.mk | 16 -
board/esd/du440/du440.c | 882
Signed-off-by: Matthias Fuchs
---
arch/powerpc/cpu/ppc4xx/Kconfig |4 -
board/esd/dp405/Kconfig | 12 --
board/esd/dp405/MAINTAINERS |6 -
board/esd/dp405/Makefile| 13 ---
board/esd/dp405/dp405.c | 112 --
board/esd/dp405/flash.c
Hi,
this series will remove a couple of esd 4xx boards that became
obsolete in the past. Some others will be switched to generic board code.
Matthias
Matthias Fuchs (22):
ppx4xx: remove APC405 board
ppc4xx: remove AR405 board
ppc4xx: remove ASH405 board
ppc4xx: remove CMS700 board
On 11/06/2014 02:03 PM, Wolfgang Denk wrote:
> cppcheck reports:
>
> [board/esd/common/auto_update.c:458]: (error) Uninitialized variable: cnt
>
> The variable is not really used anywhere, so remove it.
>
> Signed-off-by: Wolfgang Denk
> Cc: Matthias Fuchs
&
Hi Anatolij,
On 10/23/2014 06:09 PM, Anatolij Gustschin wrote:
> Hi Matthias,
>
> On Thu, 23 Oct 2014 17:50:23 +0200
> Matthias Fuchs wrote:
> ...
>> diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
>> index c5e2f16..dc2c976 100644
>> --- a/
- switch to GENERIC_BOARD
- fix env support from eeprom
Signed-off-by: Matthias Fuchs
---
changes in v2:
- add CONFIG_DISPLAY_BOARDINFO to enable checkboard() for correct
hardware revision handling
board/esd/pmc440/cmd_pmc440.c |6 +++---
include/configs/PMC440.h |4
2
- switch to GENERIC_BOARD
- fix env support from eeprom
Signed-off-by: Matthias Fuchs
---
board/esd/pmc440/cmd_pmc440.c |6 +++---
include/configs/PMC440.h |3 +++
2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440
Hi Valentin,
On 10/14/2014 04:21 PM, Valentin Longchamp wrote:
> Hi Matthias,
>
> On 10/14/2014 02:32 PM, Matthias Fuchs wrote:
>> Hi Valentin,
>>
>> my patch fixed environment from i2c eeprom. I am not sure on which board
>> I ran into that trouble. Probably PMC
Hi Valentin,
On 10/14/2014 04:21 PM, Valentin Longchamp wrote:
> Hi Matthias,
>
> On 10/14/2014 02:32 PM, Matthias Fuchs wrote:
>> Hi Valentin,
>>
>> my patch fixed environment from i2c eeprom. I am not sure on which board
>> I ran into that trouble. Probably PMC
On 10/14/2014 03:01 PM, Holger Brunck wrote:
> On 10/14/2014 02:32 PM, Matthias Fuchs wrote:
>> Hi Valentin,
>>
>> my patch fixed environment from i2c eeprom. I am not sure on which board
>> I ran into that trouble. Probably PMC440. So reverting my former patch
>&
SYS_I2C
> - i2c_init_all();
> -#else
> - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
> -#endif
> +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT)
> + i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
> #endif
> }
>
>
--
--
; Cc: Stefan Roese
thanks.
Acked-by: Matthias Fuchs
Matthias
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
This patch adds support for the new PMC440 hardware revision 1.4.
The board now uses Micrel KSZ9031 phys.
Add missing i2c initialization before reading bootstrap eeprom.
Fix a couple of coding style issues.
Make local functions static.
Signed-off-by: Matthias Fuchs
---
board/esd/pmc440
This patch moves phy initialization for VSC8601 ethernet
phys that are used on early board revisions into a separate
setup function.
Signed-off-by: Matthias Fuchs
---
board/esd/pmc440/pmc440.c | 45 ++---
1 files changed, 22 insertions(+), 23 deletions
On 19.03.2014 12:44, Stefan Roese wrote:
>> -if (miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x1f, 0x0001) == 0) {
>> -miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x11, 0x0010);
>> -miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x11,
>> val_behavior);
>> -
This patch adds support for the new PMC440 hardware revision 1.4.
The board now uses Micrel KSZ9031 phys.
Add missing i2c initialization before reading bootstrap eeprom.
Signed-off-by: Matthias Fuchs
---
board/esd/pmc440/pmc440.c | 83 +
1 file
When using CONFIG_SYS_I2C i2c needs to be initialized by
i2c_init_all(). This is done in some places but not in
eeprom_init().
Signed-off-by: Matthias Fuchs
---
common/cmd_eeprom.c |9 +++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/common/cmd_eeprom.c b/common
not affect the "normal", non NAND-booting ppc4xx platforms
> that are currently supported.
>
> Signed-off-by: Stefan Roese
> Cc: Wolfgang Denk
> Cc: Tirumala Marri
> Cc: Matthias Fuchs
> Cc: Masahiro Yamada
> Cc: Tom Rini
I used this chance to test today'
Thanks.
Acked-by: Matthias Fuchs
On 08.01.2014 12:11, Masahiro Yamada wrote:
> Signed-off-by: Masahiro Yamada
> ---
>
> board/cogent/kbm.h | 79 -
> board/cray/L1/L1.h | 28 --
> board/esd/common/s1d13806_64
Hi Pekon,
should I consider the U-Boot and Linux am335x NAND implementation to be
compatible?
So are the ECC schemes in a way identical that I can nandwrite a kernel image
from
Linux and "nand read" it from U-Boot? I tested with the 3.8.13 beaglebone
kernel (which
is of course not very represe
This patch removes support for the APM 405CR CPU.
This CPU is EOL and no board uses this chip.
Signed-off-by: Matthias Fuchs
---
arch/powerpc/cpu/ppc4xx/4xx_uart.c| 10 ++--
arch/powerpc/cpu/ppc4xx/cpu.c | 18 +--
arch/powerpc/cpu/ppc4xx/cpu_init.c|2 +-
arch/powerpc
Hi Heiko,
perhaps you should take a look at the DA8XX driver. At least
under Linux this driver also handles the AM335x.
Splash screen support (meaning support of the splashimage variable)
might be a problem because it expects a direct mapped physical address
where the splash image is stored - typ
am335x_evm_uart3 board configuration as introduced
by Andrew Bradfords recent patch series "am33xx: Enable
UART {1,2,3,4,5}...". When using the IDK with console on UART0,
those patches are not required. In this case the board
slightly needs to be modified.
Signed-off-by: Matthias Fuchs
-
This patch fixes an issue with overlapping PCI regions
on boards with more than 64MB RAM.
Signed-off-by: Matthias Fuchs
---
include/configs/CPCI405.h |2 +-
include/configs/CPCI4052.h |2 +-
include/configs/CPCI405AB.h |2 +-
include/configs/CPCI405DT.h |2 +-
4 files changed
35x_evm.h | 12 +++---
> 7 files changed, 158 insertions(+), 10 deletions(-)
>
--
----
Dipl.-Ing. Matthias Fuchs
Head of System Design
esd electronic system design gmbh
Vahrenwalder Str. 207 - 30165 Hannover - GERMANY
Phone: +49-511-37298-0 - Fax: +49-511-37298-68
Please visit ou
am335x_evm_uart3 board configuration as introduced
by Andrew Bradfords recent patch series "am33xx: Enable
UART {1,2,3,4,5}..."
Signed-off-by: Matthias Fuchs
---
arch/arm/cpu/armv7/am33xx/board.c |9 +++--
board/ti/am335x/mux.c | 20
2 files c
Tested-by: Matthias Fuchs
... on AM335x IDK board with console on UART3.
Matthias
On 25.10.2012 14:21, Andrew Bradford wrote:
> To support serial ports other than UART0 on am335x based systems like
> the Beaglebone with the RS232 cape and am335x_evm with daughterboard.
>
> Cha
Hi Igor,
you are right. Thanks. You can add my
Acked-by: Matthias Fuchs
Matthias
On 09/28/2012 12:04 PM, Igor Grinberg wrote:
> The env_ptr is already declared in environment.h, so there is no need to
> redeclare in board files (especially after including the environment.h)
> Rem
Thanks for this outstanding cleanup.
Matthias
Acked-by: Matthias Fuchs
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi,
On 29.06.2012 13:26, Wolfgang Denk wrote:
> Dear Matthias Fuchs,
>
> In message <4fed7877.2020...@esd.eu> you wrote:
>>
>> I just noticed that using getenv (and friends)
>> does not work on ARM (namely i.MX28) from board_init_f()
>> after running
Hi,
I just noticed that using getenv (and friends)
does not work on ARM (namely i.MX28) from board_init_f()
after running through the init_sequence.
So getenv_ulong() always returns the given default.
So the baudrate on affected boards is always set by CONFIG_BAUDRATE
and cannot be adjusted by th
ne example on some boards.
>
> Signed-off-by: Simon Glass
This fixes as expected the currently broken PMC440 board support.
Acked-off-by: Matthias Fuchs
Matthias
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
/include/asm/arch-mx28/imx-regs.h|1 +
>>> arch/arm/include/asm/arch-mx28/regs-digctl.h | 155
>>> ++ 4 files changed, 164 insertions(+), 8
>>> deletions(-)
>>> create mode 100644 arch/arm/include/asm/arch-mx28/regs-digctl.h
>&
Marek, Stefano,
what kept you from accepting these patches? There was no objection on these.
Matthias
On 07.02.2012 15:08, rob...@delien.nl wrote:
> From: Robert Delien
>
> This patch eliminates the use of magic numbers for the scratch register
> addresses. The registers in the DIGCTL sections
On 10.02.2012 13:42, Robert Deliën wrote:
>> Do you plan to post a patch to enable NAND on the EVK as well?
>
> Yes, I do. It's all tested and working in my workspace. But the first
> samples of our own board have arrived a couple of days ago and I'm
> currently in the process of bringing it up an
Do you plan to post a patch to enable NAND on the EVK as well?
That shouldn't be a big deal.
Matthias
On 07.02.2012 17:52, rob...@delien.nl wrote:
> From: Robert Delien
>
>
> Signed-off-by: Robert Delien
> ---
> board/freescale/mx28evk/iomux.c | 24
> 1 files chang
interrupts work again. The SPL code needs to change this
option for the ram size probing.
Signed-off-by: Matthias Fuchs
---
changes in v2:
- store old SPSR on stack instead of jiggling around with some bits
- remove #ifndef CONFIG_SKIP_LOWLEVEL_INIT
changes in v3:
- also store C1 register on st
. So save and restore the CPSR register.
>>
>> 2) The exception vector location is set back to bootrom space to
>> make the USB interrupts work again. The SPL code needs to change this
>> option for the ram size probing.
>>
>> Signed-off-by: Matthias Fuchs
>> ---
hange this
option for the ram size probing.
Signed-off-by: Matthias Fuchs
---
changes in v2:
- store old SPSR on stack instead of jiggling around with some bits
- remove #ifndef CONFIG_SKIP_LOWLEVEL_INIT
arch/arm/cpu/arm926ejs/mx28/start.S | 15 +++
1 files changed, 15 insert
is the default state when called by the bootrom.
>>
>> 2) The exception vector location is set back to bootrom space to
>> make the USB interrupts work again. The SPL code needs to change this
>> option for the ram size probing.
>>
>> Signed-off-by: Matthias
e needs to change this
option for the ram size probing.
Signed-off-by: Matthias Fuchs
---
arch/arm/cpu/arm926ejs/mx28/start.S | 17 +
1 files changed, 17 insertions(+), 0 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/mx28/start.S
b/arch/arm/cpu/arm926ejs/mx28/start.S
ind
Fixed! Patch follows.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On 31.01.2012 15:03, Matthias Fuchs wrote:
> Hi,
>
> I have a problem booting the current u-boot-imx version
> on a MX28EVK via USB. The i.MX28 CPU supports a special boot mode
> where the image (sb boot stream) is downloaded via USB device
> (all DIP switches in position
Hi Fabio,
On 31.01.2012 15:53, Fabio Estevam wrote:
> On 1/31/12, Matthias Fuchs wrote:
>
>> The USB boot mechanism is not documented that detailed.
>> Is it possible that the SPL code overwrites the bootroms ivt and
>> in consequence crashes the bootrom'
On 31.01.2012 15:25, Sergey Lapin wrote:
> On Tue, Jan 31, 2012 at 03:03:55PM +0100, Matthias Fuchs wrote:
>> Hi,
>>
>> I have a problem booting the current u-boot-imx version
>> on a MX28EVK via USB. The i.MX28 CPU supports a special boot mode
>> where the image (
Hi,
I have a problem booting the current u-boot-imx version
on a MX28EVK via USB. The i.MX28 CPU supports a special boot mode
where the image (sb boot stream) is downloaded via USB device
(all DIP switches in position 'off' on the EVK). The
CPU's internal bootrom implements a HID device in this mo
On 31.01.2012 12:38, Marek Vasut wrote:
>> I tested both patch on my mx28evk. At least I cannot notice any
>> missbehavior :-) Downloading the patched u-boot via USB recovery
>> download still does not work.
>
> Good, any improvements though?
No. It works as before. Whatever that means :-)
I will
Works fine.
Matthias
Tested-by: Matthias Fuchs
On 30.01.2012 21:02, Eric Nelson wrote:
> This patch allows a board configuration file to provide default bus
> and chip-selects for SPI flash so that first argument to the 'sf' command
> is optional.
>
> On boards that u
01:00, Marek Vasut wrote:
> The DC power STS shouldn't be checked if booting off 5V supply.
>
> Signed-off-by: Marek Vasut
> Cc: Wolfgang Denk
> Cc: Detlev Zundel
> Cc: Stefano Babic
> Cc: Robert Deliën
> Cc: Fabio Estevam
> Cc: Matthias Fuchs
>
Hi Eric,
please see my comments below.
On 24.01.2012 17:18, Eric Nelson wrote:
> This patch allows a board configuration file to provide a default
> chip-select for serial flash so that first argument to the 'sf' command
> is optional.
>
> On boards that use the mxc_spi driver and a GPIO for ch
On 24.01.2012 17:23, Fabio Estevam wrote:
> When running Linux on a mx28evk and issuing a 'reboot'command the following
> behaviour is observed:
>
> root@freescale /$ reboot
>
> starting pid 329, tty '': '/etc/rc.d/rcS stop'
On 23.01.2012 21:33, Fabio Estevam wrote:
> Hi Matthias,
>
> On 1/18/12, Matthias Fuchs wrote:
>> Hi,
>>
>> while playing around with the mx28evk and differnet bootmedia
>> I found it helpful to see the current bootmode without
>> running to the board a
>> This patch has been tested on a MX28EVK Rev. D with an installed
>> SST25VF032B 32Mbit SPI flash.
>>
>> Signed-off-by: Matthias Fuchs
>> ---
>> board/freescale/mx28evk/iomux.c |8 +++
>> include/configs/mx28evk.h | 44
>>
controller).
Reading the pins is done from SPL stage and the information is passed
in the SCRATCH1+2 registers together with the memory size.
Signed-off-by: Matthias Fuchs
---
arch/arm/cpu/arm926ejs/mx28/mx28.c | 43 +--
arch/arm/cpu/arm926ejs/mx28/spl_boot.c
controller).
Reading the pins is done from SPL stage and the information is passed
in the SCRATCH1+2 registers together with the memory size.
Signed-off-by: Matthias Fuchs
---
arch/arm/cpu/arm926ejs/mx28/mx28.c | 43 +--
arch/arm/cpu/arm926ejs/mx28/spl_boot.c
This patch adds support for the MX28 internal RTC
and enables u-boot's date command.
Signed-off-by: Matthias Fuchs
---
include/configs/mx28evk.h |8
1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index be
This patch enables USB host support on the MX28EVK board.
Signed-off-by: Matthias Fuchs
---
board/freescale/mx28evk/mx28evk.c |7 +++
include/configs/mx28evk.h | 12
2 files changed, 19 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mx28evk/mx28evk.c
SPI flash.
Signed-off-by: Matthias Fuchs
---
board/freescale/mx28evk/iomux.c |8 +++
include/configs/mx28evk.h | 44 --
2 files changed, 49 insertions(+), 3 deletions(-)
diff --git a/board/freescale/mx28evk/iomux.c b/board/freescale/mx28evk
On 16.01.2012 12:23, Marek Vasut wrote:
>> Hmm,
>>
>> can you tell me what type of SPI flash you have installed?
>> Typically the read-status-register operation requires a low to high
>> transition to get terminated. This is from my flash' datasheet:
>>
>> Read-Status-Register (RDSR)
>> The Read-St
On 01/15/2012 04:28 PM, Fabio Estevam wrote:
> On Sun, Jan 15, 2012 at 10:10 AM, Matthias Fuchs
> wrote:
>
>> That's what I also tried. But from the ref manual I got no idea.
>> When we do not find a hy to deassert the chip select manually, we cannot
>> avoid thi
On 01/14/2012 09:14 PM, Fabio Estevam wrote:
> On Sat, Jan 14, 2012 at 6:09 PM, Matthias Fuchs wrote:
>> This cannot work. I do not understand what you are trying to achieve with
>> this.
>
> I would like to avoid the extra dummy read that your patch proposes.
That's w
This cannot work. I do not understand what you are trying to achieve with this.
Matthias
On 01/14/2012 07:54 PM, Fabio Estevam wrote:
> On Sat, Jan 14, 2012 at 4:53 PM, Fabio Estevam wrote:
>
>> Actually I meant this:
>
> One more time ;-)
>
> --- a/drivers/spi/mxs_spi.c
> +++ b/drivers/spi/m
s on the M28EVK (Denx) also. You might want to turn
SPI + spi_flash debugging to see it. Also I found a posting from
Alexander Keller on the u-boot list from 12/13/2011. Perhaps the can check if
this patch fixes his problems also.
Matthias
>
>>
>> Signed-off-by: Matthias
D
flag set. This results in an extra read with the chip select being
deasserted afterwards. There seems to be no way to deassert the signal
by hand.
Signed-off-by: Matthias Fuchs
---
drivers/spi/mxs_spi.c | 12 +---
1 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/d
Hi,
I ran into trouble when trying to extend MX28EVK board support for a SPI
flash (SST24VF032B).
Some code finally runs into spi_flash_cmd_poll_bit() (spi_flash.c).
This function is then used to poll the flash's status register:
int spi_flash_cmd_poll_bit(struct spi_flash *flash, unsigned long
Robert,
On 13.01.2012 11:33, Robert Deliën wrote:
> Hi Matthias,
>
>> I a patch would be welcome. I only need USB and SPI flash for my
>> application. And USB was easy to setup. Currently I am also jiggling
>> around the SPI / SPI flash support.
>
> For USB, all you need to do is to configure it
MMC driver. This bug prevents you from loading files from a file system on an
> SD-Card.
>
> Robert.
> ___
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
--
---
On 12.01.2012 11:15, Fabio Estevam wrote:
> Hi Matthias,
>
> On Thu, Jan 12, 2012 at 8:07 AM, Matthias Fuchs wrote:
>> Hi Fabio,
>>
>> thanks for your details. Some of the discrete switches where messed up.
>> Boot Mode was fine. So now it's working fi
;S initial 2009.08 u-boot
for this CPU.
Matthias
On 11.01.2012 16:12, Fabio Estevam wrote:
> Hi Matthias,
>
> On Wed, Jan 11, 2012 at 12:41 PM, Matthias Fuchs
> wrote:
>> Hi Fabio,
>>
>> can you confirm that the current u-boot-imx tree runs fine
>> on the M
Hi Fabio,
can you confirm that the current u-boot-imx tree runs fine
on the MX28EVK? I tried it but the debug console stays dead.
This is what I did:
1) make mx28evk
2) make u-boot.sb
3) ./tools/mxsboot sd u-boot.sb u-boot-sd.sb
4) prepare an SD card as described in doc/README.m28 (only one part
Hi Marek,
On 15.12.2011 16:17, Marek Vasut wrote:
>>> Hi Marek,
>>>
>>> On Thu, 15 Dec 2011 14:26:41 +0100
>>> Marek Vasut wrote:
>>> ...
>>>
18 files changed, 63874 insertions(+), 31942 deletions(-)
V2: Align to 8 bytes per line.
Cc: Anatolij Gustschin
Cc: Stefano Babi
Hi Marek,
thanks for that work.
The patches against the esd files are
Acked-by: Matthias Fuchs
Matthias
On 15.12.2011 14:26, Marek Vasut wrote:
> First of the CHECKPATCH series of patches with per-file checkpatch fixes.
>
> This series fixes all files fpgadata.c, which contains
On 11/24/2011 06:40 PM, Mike Frysinger wrote:
> On Thursday 24 November 2011 10:39:21 Matthias Fuchs wrote:
>> -sprintf(str, "%08X%04X",
>> -*(unsigned int *)&ow_id[0],
>> -*(unsigned short *)&ow_id[4]);
>>
Signed-off-by: Matthias Fuchs
---
board/esd/common/xilinx_jtag/micro.c |2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/board/esd/common/xilinx_jtag/micro.c
b/board/esd/common/xilinx_jtag/micro.c
index 9823e5e..cba33b8 100644
--- a/board/esd/common/xilinx_jtag/micro.c
This patch fixes the PMC440 BSP command painit. The implementation was
broken since the step to the new environment handling.
Signed-off-by: Matthias Fuchs
---
V2: rebased
board/esd/pmc440/cmd_pmc440.c | 17 +++--
1 files changed, 15 insertions(+), 2 deletions(-)
diff --git a
Signed-off-by: Matthias Fuchs
---
board/esd/cpci405/cpci405.c |8 +++-
1 files changed, 3 insertions(+), 5 deletions(-)
diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c
index 98a8584..41b5ba0 100644
--- a/board/esd/cpci405/cpci405.c
+++ b/board/esd/cpci405/cpci405
Signed-off-by: Matthias Fuchs
---
board/esd/dasa_sim/flash.c |3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
diff --git a/board/esd/dasa_sim/flash.c b/board/esd/dasa_sim/flash.c
index d6a7737..e2f2aac 100644
--- a/board/esd/dasa_sim/flash.c
+++ b/board/esd/dasa_sim/flash.c
@@ -44,7
We do not use it or plan to use it.
Matthias
On 17.11.2011 15:04, Stefan Roese wrote:
> Hi Marri,
>
> I just "touched" the file "arch/powerpc/cpu/ppc4xx/usbdev.c" again to remove
> some GCC 4.6 compiler warnings. While doing this I wondered (again) if
> anybody
> is using this "driver" at all
From: Matthias Fuchs
This patch switches PMC440 board code to the CONFIG_PCI_BOOTDELAY option
instead of using a private implemention. This relies on Anatolji's patch
that moves the pcidelay handling behind pci_target_init.
Signed-off-by: Matthias Fuchs
---
board/esd/pmc440/pmc440.c |
On 13.10.2011 15:03, Stefan Roese wrote:
>>
>> Tested on PMC440. Works fine.
>>
>> Acked-by: Matthias Fuchs
>
> Thanks. In this case a:
>
> Tested-by: ...
>
> would be even better. :)
>
Even both if you like :-)
Matthias
From: Matthias Fuchs
This patch removes an invalid call to pci_write_config_dword to
PCI_BRDGOPT2 register. This function must not be used from pci_target_init
and is also at the wrong place. The correct call is done later in
pci_target_init via pci_hose_write_config_dword.
Signed-off-by
From: Matthias Fuchs
This patch fixes the PMC440 BSP command painit. The implementation was
broken since the step to the new environment handling.
Signed-off-by: Matthias Fuchs
---
board/esd/pmc440/cmd_pmc440.c | 17 +++--
1 files changed, 15 insertions(+), 2 deletions(-)
diff
ple times, restrict
> the function to wait only during its first call and to ignore
> pcidelay for any further call (as pointed out by Matthias).
>
> Signed-off-by: Anatolij Gustschin
> Cc: Matthias Fuchs
> ---
> Changes since first version:
> - extend to wait only during
gt; - if (s) {
> - int val = simple_strtoul (s, NULL, 10);
> - for (i=0; i - udelay (1000);
> - }
> -#endif /* CONFIG_PCI_BOOTDELAY */
> -
> hose_head = NULL;
>
> /* now call board specific pci_init()... */
--
-
x27;: No such file
>
> Configuring for TNY_A9G20 board...
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
> from at91sam9260_devices.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
>
Hi Wolfgang,
Daniel sent a patch to fix this issue in April
http://lists.denx.de/pipermail/u-boot/2011-April/090794.html.
Then Reinhard fixed some whitespace issues and applied it to
u-boot-atmel/next. But as we noticed just a minute ago, patching
failed somehow and most of the changes got lost.
1 - 100 of 291 matches
Mail list logo