Re: [U-Boot] Question [U-Boot,v2] nand: fix up badblock skipping

2019-10-13 Thread Michael Nazzareno Trimarchi
, Germany > Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de > = > ___ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot -- | Michael Nazzareno Trimarchi Amarula Soluti

Re: [U-Boot] rk3288 (Tinkerboard) not booting【请注意,邮件由u-boot-boun...@lists.denx.de代发】

2019-09-25 Thread Michael Nazzareno Trimarchi
t ROM... > >>> > >>> U-Boot SPL 2019.10-rc3-00401-ge23a6e5c43 (Sep 23 2019 - 15:13:20 +1000) > >>> Trying to boot from MMC1 > >>> > >>> U-Boot 2019.10-rc3-00401-ge23a6e5c43 (Sep 23 2019 - 15:13:20 +1000) > >>> > >>> Mo

Re: [U-Boot] rk3288 (Tinkerboard) not booting

2019-09-22 Thread Michael Nazzareno Trimarchi
g: SPL image is too large (size 0xb000) and will not boot > Error: image verification failed > > > $ ls -lah spl/u-boot-spl-dtb.bin > -rw-rw-r-- 1 kallisti5 kallisti5 43K Sep 22 16:17 spl/u-boot-spl-dtb.bin > > > > September 22, 2019 4:03 PM, "Michael Nazzaren

Re: [U-Boot] rk3288 (Tinkerboard) not booting

2019-09-22 Thread Michael Nazzareno Trimarchi
t; -- Alex > ___ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder

Re: [U-Boot] [PATCH] mmc: dw_mmc: Clean up variable name

2019-09-17 Thread Michael Nazzareno Trimarchi
_EN (1 << 5) > > +#define DWMCI_CTRL_DMA_EN(1 << 5) > > #define DWMCI_CTRL_SEND_AS_CCSD (1 << 10) > > -#define DWMCI_IDMAC_EN (1 << 25) > > +#define DWMCI_CTRL_USE_IDMAC (1 << 25) > > #define DWMCI_RESET_ALL

Re: [U-Boot] [PATCH] dm: pinctrl: Skip not associated gpio phandle and rise an error message

2019-09-17 Thread Michael Nazzareno Trimarchi
} > > > > ret = pinctrl_config_one(config); > > - if (ret) > > - return ret; > > + if (ret) { > > + dev_err(dev, "%s: pinctrl_config_one: err=%d\n", > >

Re: [U-Boot] Tinker-rk3288 SPL broken with MMC timeout

2019-09-16 Thread Michael Nazzareno Trimarchi
ET the board ### > > > > > > Please try with set emmc with 'fifo-mode;' in dts, I can work with this > > update, but no idea about fifo-mode is not working but i can move forward more Michael > > This is sdmmc, do you want us to try the same. > _

Re: [U-Boot] Tinker-rk3288 SPL broken with MMC timeout

2019-09-14 Thread Michael Nazzareno Trimarchi
= rk3288_dmc_ofdata_to_platdata, > #endif > .probe = rk3288_dmc_probe, > .priv_auto_alloc_size = sizeof(struct dram_info), > -#ifdef CONFIG_SPL_BUILD > +#if defined(CONFIG_TPL_BUILD) || \ > + (!defined(CONFIG_TPL) && define

Re: [U-Boot] Tinker-rk3288 SPL broken with MMC timeout

2019-09-13 Thread Michael Nazzareno Trimarchi
ERROR ### Please RESET the board ### It's broken since a lot most of the version does not boot because SPL is too big. This the problem I have in debug CMD51 is get_capabilitis Michael > > -- > Tom > ___ > U-Boot ma

Re: [U-Boot] [PATCH] cmd: avoid decimal conversion

2019-09-13 Thread Michael Nazzareno Trimarchi
FS_TYPE_ANY); > > I'm going to NAK this, but could be argued around to changing my mind. > While it's true that in general command inputs are hex and not decimal, > this has been decimal since introduction in 2009. So changing it now is > breaking ABI and other peoples test scr

Re: [U-Boot] rk3288: HDMI out causing boot hang

2019-09-13 Thread Michael Nazzareno Trimarchi
Hi On Fri, Sep 13, 2019 at 5:02 PM Michael Nazzareno Trimarchi wrote: > > Hi > > On Fri, Sep 13, 2019 at 4:02 PM Michael Nazzareno Trimarchi > wrote: > > > > Hi Anatolij > > > > On Fri, Sep 13, 2019 at 4:01 PM Anatolij Gustschin wrote: > > > &g

Re: [U-Boot] rk3288: HDMI out causing boot hang

2019-09-13 Thread Michael Nazzareno Trimarchi
Hi On Fri, Sep 13, 2019 at 4:02 PM Michael Nazzareno Trimarchi wrote: > > Hi Anatolij > > On Fri, Sep 13, 2019 at 4:01 PM Anatolij Gustschin wrote: > > > > Hi Jagan, > > > > On Fri, 13 Sep 2019 08:19:47 +0530 > > Jagan Teki ja...@amarulasolutions.com wr

Re: [U-Boot] rk3288: HDMI out causing boot hang

2019-09-13 Thread Michael Nazzareno Trimarchi
understand the reason Michael > > -- > Anatolij > > ___ > Linux-rockchip mailing list > linux-rockc...@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-rockchip -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO

Re: [U-Boot] Rockpro64_V2.1 2018-07-02 Boot Freeze

2019-08-19 Thread Michael Nazzareno Trimarchi
CS=1 Die Bus-Width=16 Size=2048MB > 256B stride > channel 0 > CS = 0 > MR0=0xB8 > MR4=0x1 > MR5=0xFF > MR8=0x10 > MR12=0x72 > MR14=0x72 > MR18=0x0 > MR19=0x0 > MR24=0x8 > MR25=0x0 > channel 1 > CS = 0 > MR0=0xB8

Re: [U-Boot] [PATCH 03/15] rockchip: rk3288: Print reset reason

2019-08-14 Thread Michael Nazzareno Trimarchi
Hi On Wednesday, August 14, 2019, Wadim Egorov wrote: > > On 14.08.19 11:40, Jagan Teki wrote: > > On Mon, Aug 5, 2019 at 6:00 PM Kever Yang > wrote: > >> > >> On 2019/7/29 下午3:46, Jagan Teki wrote: > >>> Print the reason for reset instead of storing it into > >>> env variable in rk3288. >

Re: [U-Boot] What if ATF can be part of U-Boot source, like SPL?

2019-06-30 Thread Michael Nazzareno Trimarchi
On Sun, Jun 30, 2019 at 4:03 PM Marek Vasut wrote: > > On 6/30/19 3:57 PM, Tom Rini wrote: > > On Sat, Jun 29, 2019 at 08:32:00PM +0530, Jagan Teki wrote: > > > >> In terms of code maintenance and development feasibility it is always > >> a better approach to have out-of-tree code or binary to be

Re: [U-Boot] x86: Slim Bootloader(https://github.com/slimbootloader/slimbootloader) support

2019-06-29 Thread Michael Nazzareno Trimarchi
offeelake platforms with FSP2.x. The Slim Bootloader is also > > > > designed with multi-stage approach and payload concept. We have a > > > > proof of concept with u-boot as a payload of Slim Bootloader and > > > > would like to upstream

Re: [U-Boot] Possible bug in imx6ul nand

2019-06-19 Thread Michael Nazzareno Trimarchi
y else face this problem? > > I did try to erase nand with "flash_erase" from linux and it worked > with throwing any error. In and all it seems like a uboot issue. > > Thanks a lot, > Shyam -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO -

Re: [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2

2019-05-23 Thread Michael Nazzareno Trimarchi
> > to fit in and we still want one binary for all three sabresd boards. > > Well, no, you don't have to use DM in SPL. But what I'm wondering is if > we need qp/dl/q specific information at the SPL stage or if that can > wait until we're doing the real U-Boot. > Is dcd tab

Re: [U-Boot] [PATCH 1/2] mtd: mxs_nand_spl: fix nand_command protocol violation

2019-05-17 Thread Michael Nazzareno Trimarchi
Hi Stefano On Fri, May 17, 2019 at 4:52 PM Stefano Babic wrote: > > On 14/05/19 22:56, Andrea Scian - DAVE Embedded Systems wrote: > > > > Hi Michael, > > On 14/05/19 20:44, Michael Nazzareno Trimarchi wrote: > >> Hi all > >> > >> On Tu

Re: [U-Boot] [PATCH 1/2] mtd: mxs_nand_spl: fix nand_command protocol violation

2019-05-14 Thread Michael Nazzareno Trimarchi
) { > chip->cmd_ctrl(mtd, page_addr, NAND_ALE); > -- > 2.19.2 > > ___ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot -- | Michael Nazzareno Trimarchi

Re: [U-Boot] [PATCH 4/8] spi: Kconfig: Mark MXS_SPI has BROKEN

2019-04-29 Thread Michael Nazzareno Trimarchi
Hi Marek On Mon, Apr 29, 2019 at 1:27 PM Marek Vasut wrote: > > On 4/29/19 1:24 PM, Tom Rini wrote: > > On Mon, Apr 29, 2019 at 01:06:57PM +0200, Marek Vasut wrote: > >> On 4/29/19 1:02 PM, Jagan Teki wrote: > >>> On Mon, Apr 29, 2019 at 4:28 PM Marek Vasut wrote: > > On 4/29/19 12:40

Re: [U-Boot] [PATCH v3] spi: Zap mxs_spi driver-related code

2019-04-24 Thread Michael Nazzareno Trimarchi
Hi On Wed., 24 Apr. 2019, 11:14 am Måns Rullgård, wrote: > Michael Nazzareno Trimarchi writes: > > > Hi Tom > > > > On Fri, Apr 19, 2019 at 2:42 PM Tom Rini wrote: > >> > >> On Fri, Apr 19, 2019 at 11:25:47AM +0200, Marek Vasut wrote: &

Re: [U-Boot] [PATCH v3] spi: Zap mxs_spi driver-related code

2019-04-19 Thread Michael Nazzareno Trimarchi
n't heard anything before then. > > So, are the mx28 family boards something we still want to support? I > assume there's going to be other things that need converting there too. I have one mx28 long term support. We have added spl support and booting. Can you please wait to drop it? Micha

Re: [U-Boot] arm: sunxi: Bananapi_M2_Ultra not working with DM_MMC

2019-04-08 Thread Michael Nazzareno Trimarchi
Hi jagan On Mon., 8 Apr. 2019, 8:26 pm Tom Rini, wrote: > On Mon, Apr 08, 2019 at 06:23:29PM +0530, Jagan Teki wrote: > > Hi Paul, > > > > On Mon, Apr 8, 2019 at 6:00 PM Paul Kocialkowski > > wrote: > > > > > > Hi, > > > > > > On Thu, 2019-04-04 at 05:51 -0300, Pablo Sebastián Greco wrote: >

Re: [U-Boot] arm: sunxi: Bananapi_M2_Ultra not working with DM_MMC

2019-04-08 Thread Michael Nazzareno Trimarchi
Hi On Mon, Apr 8, 2019 at 4:48 PM Tom Rini wrote: > > On Mon, Apr 08, 2019 at 07:47:13PM +0530, Jagan Teki wrote: > > On Mon, Apr 8, 2019 at 7:31 PM Paul Kocialkowski > > wrote: > > > > > > Hi, > > > > > > Le lundi 08 avril 2019 à 19:21 +0530, Jagan Teki a écrit : > > > > On Mon, Apr 8, 2019 at

Re: [U-Boot] [V3 1/3] sunxi: Fix A33 memory initialization

2019-03-28 Thread Michael Nazzareno Trimarchi
;= ~(0xff << 0); > reg_val |= (0x33 << 8); > - reg_val |= (0x8 << 0); > + reg_val |= (0x10 << 0); > writel(reg_val, _ctl->dramtmg8); > /* Set phy interface time */ > reg_val = (0x2 << 24) | (t_rdata

Re: [U-Boot] [V6 PATCH 3/3] sunxi: Use clrsetbits_le32 instead of multiple instruction

2019-03-28 Thread Michael Nazzareno Trimarchi
gned-off-by: Shyam Saini > > --- > > Is this patch on master? couldn't apply at all? I think you should apply 1 and 2 Michael > ___ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot -- | M

Re: [U-Boot] [PATCH] pico-imx7: Disable video support

2019-03-26 Thread Michael Nazzareno Trimarchi
> } > #endif > > Then I can load U-Boot via USB without problem. > > However, in order to turn on the LCD we need to turn on GPIO1_6. > > If I do this from the U-Boot prompt: > > => gpio set 6 > > Then the board hangs. > > Not sure why setting GPIO1_6 i

Re: [U-Boot] [PATCH] pico-imx7: Disable video support

2019-03-25 Thread Michael Nazzareno Trimarchi
Hi On Mon, Mar 25, 2019 at 5:56 PM Fabio Estevam wrote: > > Hi Michael, > > On Mon, Mar 25, 2019 at 1:51 PM Michael Nazzareno Trimarchi > wrote: > > > Let me summarize ;). Do you have any reset from the tool? does it > > sends everything > > using usb? Does S

Re: [U-Boot] [PATCH] pico-imx7: Disable video support

2019-03-25 Thread Michael Nazzareno Trimarchi
Hi On Mon, Mar 25, 2019 at 5:48 PM Fabio Estevam wrote: > > Hi Michael, > > On Mon, Mar 25, 2019 at 1:38 PM Michael Nazzareno Trimarchi > wrote: > > > + /* Perform DDR DRAM calibration */ > > + udelay(100); > > + mmdc

Re: [U-Boot] [PATCH] pico-imx7: Disable video support

2019-03-25 Thread Michael Nazzareno Trimarchi
Hi On Mon, Mar 25, 2019 at 5:37 PM Fabio Estevam wrote: > > Hi Michael, > > On Mon, Mar 25, 2019 at 1:29 PM Michael Nazzareno Trimarchi > wrote: > > > Can you use ddr calibration instead of fixed value? Does this happen before > > migration to DT > > Yes,

Re: [U-Boot] [PATCH] pico-imx7: Disable video support

2019-03-25 Thread Michael Nazzareno Trimarchi
Hi On Mon, Mar 25, 2019 at 4:25 PM Fabio Estevam wrote: > > Hi Michael, > > On Sat, Mar 23, 2019 at 7:19 PM Michael Nazzareno Trimarchi > wrote: > > > Are you sure about memory calibration? > > I couldn't spot an issue with regards to memory initializat

Re: [U-Boot] [PATCH] pico-imx7: Disable video support

2019-03-23 Thread Michael Nazzareno Trimarchi
Hi On Sat., 23 Mar. 2019, 11:16 pm Joris OFFOUGA, wrote: > Le sam. 23 mars 2019 à 14:53, Fabio Estevam a écrit : > > > Since commit 9e3c0174da842 ("pico-imx7d: Add LCD support") loading U-Boot > > via USB download mode causes the following hang: > > > > SDP: initialize... > > SDP: handle

[U-Boot] Secure Boot nand on IMX6DL

2019-03-20 Thread Michael Nazzareno Trimarchi
Hi all I'm trying to enable secure boot on nand but seems that SPL does not start at all. Any help? I'm using latest uboot Michael -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0

Re: [U-Boot] [V4 3/3] sunxi: Use clrsetbits_le32 instead of multiple instruction

2019-03-18 Thread Michael Nazzareno Trimarchi
its_le32(_ctl->dramtmg8, (0x33 << 8) | (0x10 << 0)); > > That should just be one call to clrsetbits_le32(). > > > writel(reg_val, _ctl->dramtmg8); > > And you need to remove this line, of course, otherwise you write the va

Re: [U-Boot] [PATCH V2] Revert "pico-imx7d: Add LCD support"

2019-03-13 Thread Michael Nazzareno Trimarchi
Hi On Wed., 13 Mar. 2019, 12:39 pm Fabio Estevam, wrote: > Hi Joris, > > On Wed, Mar 13, 2019 at 8:35 AM jorisoffouga > wrote: > > > You were right in increasing the size of that fixed bug, the old size > was 0x400 > > > > Hi Fabio, > > > > I send patch with this correctif ? > > Excellent,

Re: [U-Boot] [PATCH V2] Revert "pico-imx7d: Add LCD support"

2019-03-12 Thread Michael Nazzareno Trimarchi
_ENV \ > "fdt_addr=0x8300\0" \ > "fdt_addr_r=0x8300\0" \ > @@ -133,16 +131,6 @@ > #define CONFIG_POWER_PFUZE3000 > #define CONFIG_POWER_PFUZE3000_I2C_ADDR0x08 > > -#ifdef CONFIG_VIDEO > -#define CONFIG_VIDEO_MXS > -#define CONF

Re: [U-Boot] [PATCH] ARM: Fix nand boot of imx6q and imx6qdl boards

2019-03-07 Thread Michael Nazzareno Trimarchi
would require some malloc() > pool before relocation in order to load U-Boot proper properly. > > So, enable SPL malloc() pool of 0x2000 size similarly like what we have used > for > icore mmc defconfigs. > > Once this is added, > > Reviewed-by: Jagan Teki I will upl

Re: [U-Boot] IMX6 NAND boot regression

2019-03-05 Thread Michael Nazzareno Trimarchi
Hi On Tue, Mar 5, 2019 at 6:20 PM Tim Harvey wrote: > > On Tue, Mar 5, 2019 at 9:00 AM Michael Nazzareno Trimarchi > wrote: > > > > Hi Tim > > > > On Tue, Mar 5, 2019 at 5:54 PM Tim Harvey wrote: > > > > > > On Tue, Mar 5, 2019

Re: [U-Boot] IMX6 NAND boot regression

2019-03-05 Thread Michael Nazzareno Trimarchi
Hi Tim On Tue, Mar 5, 2019 at 5:59 PM Michael Nazzareno Trimarchi wrote: > > Hi Tim > > On Tue, Mar 5, 2019 at 5:54 PM Tim Harvey wrote: > > > > On Tue, Mar 5, 2019 at 8:41 AM Michael Nazzareno Trimarchi > > wrote: > > > > > > HI all > > &g

Re: [U-Boot] IMX6 NAND boot regression

2019-03-05 Thread Michael Nazzareno Trimarchi
Hi Tim On Tue, Mar 5, 2019 at 5:54 PM Tim Harvey wrote: > > On Tue, Mar 5, 2019 at 8:41 AM Michael Nazzareno Trimarchi > wrote: > > > > HI all > > > > On Mon, Feb 4, 2019 at 7:14 PM Tim Harvey wrote: > > > > > > On Sat, Feb 2, 2019 at 5:30

Re: [U-Boot] IMX6 NAND boot regression

2019-03-05 Thread Michael Nazzareno Trimarchi
take note > to avoid anything between v2018.07 and the next release v2019.03 for > IMX NAND SPL. > > It kind of sucks that patches that affected IMX NAND SPL were accepted > with no testing on a NAND SPL board or cc's sent to maintainers of > boar

Re: [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken

2019-02-17 Thread Michael Nazzareno Trimarchi
Hi [U-Boot] [PATCH 3/5] rockchip: rk3288-vyasa: increase heap space after relocation Can you check it if you have the same problem? Michael On Sun., 17 Feb. 2019, 1:11 pm Heinrich Schuchardt On 2/17/19 9:19 AM, David Wu wrote: > > Hi Henrich, > > > > 在 2019/2/16 下午5:53, Heinrich Schuchardt

Re: [U-Boot] [PATCH V2 3/3] sunxi: Fix A33 memory initialization

2019-02-15 Thread Michael Nazzareno Trimarchi
o have but It's not my case. The best for me is update the commit message and give more info there. Add the memory components and the layout of my setup, ask to test other boards before get included Michael > > > All I have is a multimeter and no A33 ;-) > > > You are aw

Re: [U-Boot] [PATCH V2 3/3] sunxi: Fix A33 memory initialization

2019-02-14 Thread Michael Nazzareno Trimarchi
LPDDR3 so make no sense to try to let them work as LPDDR3. I will update the commit message Michael > > > /* Set phy interface time */ > > reg_val = (0x2 << 24) | (t_rdata_en << 16) | (0x1 << 8) > > | (wr_latency << 0); > > -- > &

Re: [U-Boot] [RFC PATCH 2/3] sunxi: Don't change the rank in dram size detection in A33

2019-02-13 Thread Michael Nazzareno Trimarchi
gt; Maxime Ripard, Bootlin > Embedded Linux and Kernel engineering > https://bootlin.com -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172

Re: [U-Boot] [RFC PATCH 2/3] sunxi: Don't change the rank in dram size detection in A33

2019-02-13 Thread Michael Nazzareno Trimarchi
Hi Maxime On Wed, Feb 13, 2019 at 9:49 AM Michael Nazzareno Trimarchi wrote: > > Hi Maxime > > On Wed, Feb 13, 2019 at 9:44 AM Maxime Ripard > wrote: > > > > On Tue, Feb 12, 2019 at 05:57:07PM +0100, Michael Trimarchi wrote: > > > Change the size create a

Re: [U-Boot] [RFC PATCH 3/3] sunxi: Fix A33 memory initialization

2019-02-13 Thread Michael Nazzareno Trimarchi
Michael > > Maxime > > -- > Maxime Ripard, Bootlin > Embedded Linux and Kernel engineering > https://bootlin.com -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)85111

Re: [U-Boot] Nand boot on imx6q board is broken

2019-01-31 Thread Michael Nazzareno Trimarchi
Hi On Thu., 31 Jan. 2019, 6:26 pm Adam Ford On Thu, Jan 31, 2019 at 7:58 AM Shyam Saini > wrote: > > > > Hi Adam, > > > > Thanks a lot for replying. > > > > > > > > I spent some time trying to make the imx6q_logic board boot from SPL > > > from NAND, but I needed to patch a few things. Some

Re: [U-Boot] Issue with compiling uboot for SoC-eds arria 10

2019-01-10 Thread Michael Nazzareno Trimarchi
nd a link to it Michael > > ____ > From: Michael Nazzareno Trimarchi > To: Sujay Suresh > Cc: "u-boot@lists.denx.de" > Sent: Thursday, January 10, 2019 5:54 PM > Subject: Re: [U-Boot] Issue with compiling uboot for SoC-eds arria 10 > >

Re: [U-Boot] Issue with compiling uboot for SoC-eds arria 10

2019-01-10 Thread Michael Nazzareno Trimarchi
of the build log. If you are running ubuntu in a virtual machine configure add on to do copy and paste Michael > Please Provide your support. > Best. > ___ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-b

Re: [U-Boot] BPI-M2 Magic: DRAM:Timeout initialising DRAM

2019-01-10 Thread Michael Nazzareno Trimarchi
> > Jagan. > > -- > Jagan Teki > Senior Linux Kernel Engineer | Amarula Solutions > U-Boot, Linux | Upstream Maintainer > Hyderabad, India. > ___ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de

Re: [U-Boot] SPL variant of sunxi nand module

2018-12-23 Thread Michael Nazzareno Trimarchi
Nikolai > > > > > > > > Thank you, > > > > Regards, > > Nikolai > > ___ > > U-Boot mailing list > > U-Boot@lists.denx.de > > https://lists.denx.de/listinfo/u-boot > > ___

Re: [U-Boot] [linux-sunxi] [PATCH] Revert "sunxi: board: Print error after power initialization fails"

2018-12-19 Thread Michael Nazzareno Trimarchi
bit pointless. Just reverting > this and meanwhile checking the DRAM init code seems the easier solution. > Definitely have the same impression. Please send the same revert but adjust the commit message Michael > Cheers, > Andre > _

Re: [U-Boot] [linux-sunxi] [PATCH] Revert "sunxi: board: Print error after power initialization fails"

2018-12-18 Thread Michael Nazzareno Trimarchi
Karl P_______ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruqu

Re: [U-Boot] [PATCH] sunxi: Fix memory 2-rank initialization for a33 cpu

2018-11-07 Thread Michael Nazzareno Trimarchi
Signed-off-by: Michael Trimarchi > > Acked-by: Maxime Ripard > Can you test on a consumer board with A33? I have tested over oscilloscope on my device Michael > Maxime > > -- > Maxime Ripard, Bootlin > Embedded Linux and Kernel engineering > https://bootlin.com -

Re: [U-Boot] [PATCH] sunxi: Fix memory 2-rank initialization for a33 cpu

2018-11-02 Thread Michael Nazzareno Trimarchi
dth = 16, > .page_size = 2048, > -- > 2.17.1 > -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172

Re: [U-Boot] Moving MX25 to SPL

2018-10-16 Thread Michael Nazzareno Trimarchi
Hi Stefano On Tue, Oct 16, 2018 at 12:59 PM Stefano Babic wrote: > > Hi Michael, > > On 16/10/2018 12:32, Michael Nazzareno Trimarchi wrote: > > Hi all > > > > I'm trying to figure out how move the mx25 to two stage boot using > > SPL. Anyone know why was

[U-Boot] Moving MX25 to SPL

2018-10-16 Thread Michael Nazzareno Trimarchi
Hi all I'm trying to figure out how move the mx25 to two stage boot using SPL. Anyone know why was done it before? More technical question is if I can convert imximage.cfg value and let it write to an spl.c file that make the same. I don't have a lot of background on imx25 bootrom and what it's

Re: [U-Boot] [PATCH 1/4] net: dm: fec: Fix time unit error in phy-reset-duration

2018-10-04 Thread Michael Nazzareno Trimarchi
dm_gpio_set_value(>phy_reset_gpio, 0); > } Reviewed-by: Michael Trimarchi > } > -- > 1.9.1 > -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 4

Re: [U-Boot] [PATCH] common: add board specific hook for os preboot config

2018-09-24 Thread Michael Nazzareno Trimarchi
Hi On Mon., 24 Sep. 2018, 5:15 pm Stefan Agner, wrote: > On 24.09.2018 16:56, Michael Nazzareno Trimarchi wrote: > > Hi > > > > On Mon., 24 Sep. 2018, 4:51 pm Stefan Agner, wrote: > > > >> On 24.09.2018 16:43, Michael Nazzareno Trimarchi wrote: > >>

Re: [U-Boot] [PATCH] common: add board specific hook for os preboot config

2018-09-24 Thread Michael Nazzareno Trimarchi
Hi On Mon., 24 Sep. 2018, 4:51 pm Stefan Agner, wrote: > On 24.09.2018 16:43, Michael Nazzareno Trimarchi wrote: > > Hi > > > > On Thu., 16 Aug. 2018, 3:09 pm Stefan Agner, wrote: > > > >> On 13.08.2018 09:30, Gerard Salvatella wrote: > >>>

Re: [U-Boot] [PATCH] common: add board specific hook for os preboot config

2018-09-24 Thread Michael Nazzareno Trimarchi
Hi On Thu., 16 Aug. 2018, 3:09 pm Stefan Agner, wrote: > On 13.08.2018 09:30, Gerard Salvatella wrote: > > Some boards require specific configuration prior to booting the kernel. > > For instance, our boards require shutting down the display to avoid > > fading transitions before the drivers

Re: [U-Boot] [PATCH] fw_setenv: avoid writing environment when nothing has changed

2018-09-24 Thread Michael Nazzareno Trimarchi
Hi On Mon., 24 Sep. 2018, 8:19 am Rasmus Villemoes, wrote: > On 2018-09-05 21:22, Rasmus Villemoes wrote: > > In the case where one deletes an already-non-existing variable, or sets > > a variable to the value it already has, there is no point in writing the > > environment back, thus

Re: [U-Boot] [PATCH v2 06/13] pico-imx7d: Update the README file

2018-09-04 Thread Michael Nazzareno Trimarchi
; - > $ sudo dfu-util -D u-boot.img -a u-boot > > Remove power from the pico board. > -- > 2.18.0 > > ___ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot -- | Michael Nazz

Re: [U-Boot] [PATCH 02/13] pico-imx6ul: Convert to SPL

2018-09-04 Thread Michael Nazzareno Trimarchi
Hi On Tue, Sep 4, 2018 at 2:56 PM Fabio Estevam wrote: > > Hi Michael, > > On Tue, Sep 4, 2018 at 9:53 AM, Michael Nazzareno Trimarchi > wrote: > > > Ok, if you resend with the change discussed I'm fine with it. The reason > > that > > I'm trying to make muc

Re: [U-Boot] [PATCH 02/13] pico-imx6ul: Convert to SPL

2018-09-04 Thread Michael Nazzareno Trimarchi
Hi Fabio On Tue, Sep 4, 2018 at 2:50 PM Fabio Estevam wrote: > > On Tue, Sep 4, 2018 at 9:41 AM, Michael Nazzareno Trimarchi > wrote: > > > Well, yes and no. Not all the bits can be writable according to the > > documentation if I remember and if the value you > >

Re: [U-Boot] [PATCH 02/13] pico-imx6ul: Convert to SPL

2018-09-04 Thread Michael Nazzareno Trimarchi
Hi On Tue, Sep 4, 2018 at 2:33 PM Fabio Estevam wrote: > > Hi Michael, > > On Mon, Sep 3, 2018 at 10:05 AM, Michael Nazzareno Trimarchi > wrote: > > >> >> +static void ccgr_init(void) > >> >> +{ > >> >> +

Re: [U-Boot] [PATCH 02/13] pico-imx6ul: Convert to SPL

2018-09-03 Thread Michael Nazzareno Trimarchi
; >> + writel(0x, >CCGR7); are you sure that arrive to 7? > > > > These can be know values. > > I am sorry, but I did not understand your comments. > I think that it's not a good strategy to enable all the gate in general here. Michael > Please clar

Re: [U-Boot] Problem booting uImage with u-boot

2018-08-01 Thread Michael Nazzareno Trimarchi
's better. What is your its file for generate fit-image? Michael > Regards > Saeed > > On Wed, 1 Aug 2018, 11:25 p.m. Michael Nazzareno Trimarchi, > wrote: >> >> Hi >> >> On Wed, Aug 1, 2018 at 8:47 PM, Saeed Abdoli wrote: >> > Hello >> &

Re: [U-Boot] Problem booting uImage with u-boot

2018-08-01 Thread Michael Nazzareno Trimarchi
_______ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)8511

Re: [U-Boot] [PATCH V2] eth: dm: fec: Add gpio phy reset binding

2018-07-23 Thread Michael Nazzareno Trimarchi
ce *dev) >>>> return -EINVAL; >>>> } >>>> >>>> - /* TODO >>>> -* Need to get the reset-gpio and related properties from DT >>>> -* and implem

Re: [U-Boot] [U-Boot,V3,1/2] spl: Fix redundant image of uboot

2018-07-20 Thread Michael Nazzareno Trimarchi
Hi On Fri, Jul 20, 2018 at 10:11 PM, Tom Rini wrote: > On Fri, Jul 20, 2018 at 10:09:00PM +0200, Michael Nazzareno Trimarchi wrote: >> Hi Tom >> >> On Fri, Jul 20, 2018 at 9:54 PM, Tom Rini wrote: >> > On Fri, Jul 06, 2018 at 05:09:22PM +0200, Michael Trima

Re: [U-Boot] [U-Boot,V3,1/2] spl: Fix redundant image of uboot

2018-07-20 Thread Michael Nazzareno Trimarchi
ot feature and this was the address problem on the specific case. We can call ->verify image every ->load, anyway can you explain better why you need a configurable behavior? Michael > -- > Tom -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - F

Re: [U-Boot] [PATCH 01/16] pico-imx7d: Convert to distro config

2018-07-19 Thread Michael Nazzareno Trimarchi
gt; - "else run netboot; " \ > - "fi; " \ > - "else run netboot; fi" > + "fdt_addr_r=0x8300\0" \ > + "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ > + "pxefile_addr_r=&

Re: [U-Boot] [PATCH V3 1/2] spl: Fix redundant image of uboot

2018-07-11 Thread Michael Nazzareno Trimarchi
header_t *)spl_image->load_addr)) { > + debug("Header checksum failed\n"); > + return -EINVAL; > + } > + > + /* > +* Verify the crc of the data > +*/ > + if (!image_check_dcrc((const image_header_t *)spl_image->load_addr)) { > +

Re: [U-Boot] [PATCH 1/3] spl: Fix compilation issue when you want to use SPL from enviroment

2018-07-08 Thread Michael Nazzareno Trimarchi
ORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > CONFIG_SPL_LIBGENERIC_SUPPORT=y > +CONFIG_SPL_ENV_SUPPORT=y > CONFIG_TARGET_MX6ULL_ISIOT=y > CONFIG_SPL_SERIAL_SUPPORT=y > CONFIG_SPL=y > -- > 2.7.4 > Michael -- | Michael Nazzareno Trim

Re: [U-Boot] persistent logo on LCD on imx6ull

2018-07-04 Thread Michael Nazzareno Trimarchi
Hi otavio On Wed., 4 Jul. 2018, 7:03 pm Michael Nazzareno Trimarchi, < mich...@amarulasolutions.com> wrote: > Hi > > > On Wed, Jul 4, 2018 at 6:45 PM, Otavio Salvador > wrote: > > On Tue, Jul 3, 2018 at 6:20 AM, Michael Nazzareno Trimarchi > > wrote: > &

Re: [U-Boot] persistent logo on LCD on imx6ull

2018-07-04 Thread Michael Nazzareno Trimarchi
Hi On Wed, Jul 4, 2018 at 6:45 PM, Otavio Salvador wrote: > On Tue, Jul 3, 2018 at 6:20 AM, Michael Nazzareno Trimarchi > wrote: >> Ok I have fixed it :) > > Mind to share how? commit 9c066153a6876b1ae57117d99ad228a07873eb75 Author: Michael Trimarchi Date: Wed Jul 4 1

Re: [U-Boot] [PATCH 1/2] spl: Fix redundant image of uboot

2018-07-04 Thread Michael Nazzareno Trimarchi
Hi On Wed, Jul 4, 2018 at 5:10 PM, Lothar Waßmann wrote: > Michael Nazzareno Trimarchi wrote: > >> Hi >> >> On Wed, Jul 4, 2018 at 4:19 PM, Lothar Waßmann >> wrote: >> > Hi, >> > >> > On Wed, 4 Jul 2018 15:53:36 +0200 Michael Trimarch

Re: [U-Boot] [PATCH 1/2] spl: Fix redundant image of uboot

2018-07-04 Thread Michael Nazzareno Trimarchi
hcrc(...) { >> + debug("Header checksum failed\n"); >> + return -EINVAL; >> + } >> + err = image_check_dcrc((const image_header_t *)spl_image->load_addr); >> + if (!err) { >> > dto. Just because I want to be

Re: [U-Boot] persistent logo on LCD on imx6ull

2018-07-03 Thread Michael Nazzareno Trimarchi
Hi Peng Ok I have fixed it :) Michael On Mon, Jul 2, 2018 at 4:26 PM, Michael Nazzareno Trimarchi wrote: > Hi Peng > > I'm working to make persistent the uboot logo on imx6ull platform but > I have some problem with the framebuffer. Now this is the main idea > > I use t

[U-Boot] persistent logo on LCD on imx6ull

2018-07-02 Thread Michael Nazzareno Trimarchi
n gpios so they get down and up again (nshut and nreset) even I don't touch them 2) Even clock tree is ok pixelclock seems that stops to go out Do you have any suggestion? Michael -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | CO

Re: [U-Boot] [PATCH 3/3] spi: mxc_spi: Fix spi mode communication where clock is inverted

2018-06-30 Thread Michael Nazzareno Trimarchi
mxc_spi_claim_bus_internal(struct >> mxc_spi_slave *mxcs, int cs) >> } >> reg_write(>period, MXC_CSPIPERIOD_32KHZ); >> reg_write(>intr, 0); >> + udelay(50); >> >> return 0; >> } >> -- >> 2.7.4 > -- |

Re: [U-Boot] help: how get last command result using scripting

2018-06-22 Thread Michael Nazzareno Trimarchi
t;> >> U-Boot mailing list >> >> U-Boot@lists.denx.de >> >> https://lists.denx.de/listinfo/u-boot >> > >> > >> > >> > >> > Best regards, >> > >> > Lukasz Majewski >> > >> > -- >

Re: [U-Boot] help: how get last command result using scripting

2018-06-22 Thread Michael Nazzareno Trimarchi
Any idea? >> >> Michael >> ___ >> U-Boot mailing list >> U-Boot@lists.denx.de >> https://lists.denx.de/listinfo/u-boot > > > > > Best regards, > > Lukasz Majewski > > -- > > DENX Software Enginee

Re: [U-Boot] [PATCH] video: mxsfb: Support data-enable and pixclock polarity

2018-06-21 Thread Michael Nazzareno Trimarchi
w it will be only set if requested by new flag in mode sync. This > is going to break current users, I'm afraid. Who is going to request > this for all driver users? Will it be supplied via environment mode > variable "video=ctfb..." ? This should be

[U-Boot] help: how get last command result using scripting

2018-06-19 Thread Michael Nazzareno Trimarchi
Hi all Trying to understand how to get the last result. For example: sspi 1:0.3 24 72; sspi 1:1.3 24 73 Now I need to have the last output of the last command to compare in one script. Any idea? Michael ___ U-Boot mailing list

Re: [U-Boot] [PATCH] spi: mxc: Fix compilation problem of DM_SPI class driver

2018-06-17 Thread Michael Nazzareno Trimarchi
) > return -ENODEV; > > -- > 2.7.4 > -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172

Re: [U-Boot] [PATCH] sunxi: improve throughput in the sunxi_mmc driver

2018-04-20 Thread Michael Nazzareno Trimarchi
Hi On Fri, Apr 20, 2018 at 10:10 PM, Maxime Ripard <maxime.rip...@bootlin.com> wrote: > On Mon, Apr 16, 2018 at 10:37:11PM +0200, Michael Nazzareno Trimarchi wrote: >> Hi >> >> On Mon, Apr 16, 2018 at 9:55 PM, Maxime Ripard >> <maxime.rip...@bootlin.com> wr

Re: [U-Boot] [PATCH] sunxi: improve throughput in the sunxi_mmc driver

2018-04-16 Thread Michael Nazzareno Trimarchi
ng? > Just curios but what is the result if %s/udelay(1000)/udelay(1)/g in the driver Michael > Maxime > > -- > Maxime Ripard, Bootlin (formerly Free Electrons) > Embedded Linux and Kernel engineering > https://bootlin.com > > ___ >

Re: [U-Boot] imx6: USB SDP failed for u-boot-dtb.img

2018-03-06 Thread Michael Nazzareno Trimarchi
t process >>>> the same, any help? >>> >>> Is this a regression? If so, are you able to run a 'git bisect'? >> >> I don't think it's regression, I'm guessing this is first test with >> u-boot-dtb.img or did you tested the similar image type? >> > &

Re: [U-Boot] FEC Clock

2018-02-01 Thread Michael Nazzareno Trimarchi
Hi On 1 Feb. 2018 6:06 pm, "Fabio Estevam" wrote: [Please do not top post in mailing lists] On Tue, Jan 30, 2018 at 6:40 AM, Mehmet Ali İPİN wrote: > Dear Estevam, > > I used GPIO 16 to generate the 25MHZ clock, using

Re: [U-Boot] [PATCH] mx6sabresd: Add fastboot support

2018-01-29 Thread Michael Nazzareno Trimarchi
are partition already defined? in sabre config. It's not used to know the u-boot version ;) Can you just update the commit message in how you perform the update? Michael ___ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listin

Re: [U-Boot] [U-Boot,v2,4/5] clk: implement clk_set_defaults()

2018-01-28 Thread Michael Nazzareno Trimarchi
Hi On 28 Jan. 2018 6:15 pm, "Dr. Philipp Tomsich" < philipp.toms...@theobroma-systems.com> wrote: Michael, On 28 Jan 2018, at 17:54, Michael Nazzareno Trimarchi < mich...@amarulasolutions.com> wrote: Hi On 28 Jan. 2018 5:50 pm, "Philipp Tomsich" <phi

Re: [U-Boot] [U-Boot,v2,4/5] clk: implement clk_set_defaults()

2018-01-28 Thread Michael Nazzareno Trimarchi
Hi On 28 Jan. 2018 5:50 pm, "Philipp Tomsich" < philipp.toms...@theobroma-systems.com> wrote: > Linux uses the properties 'assigned-clocks', 'assigned-clock-parents' > and 'assigned-clock-rates' to configure the clock subsystem for use > with various peripheral nodes. > > This implements

Re: [U-Boot] [PATCH V3] imx: mx25: Remove SION bit in all pin-mux that are safe

2018-01-26 Thread Michael Nazzareno Trimarchi
nly for eSDHC1, so Linux's >> arch/arm/boot/dts/imx25-pinfunc.h should be fixed). Therefore, SION is >> mandatory for all the eSDHC CMD functions in >> arch/arm/include/asm/arch-mx25/iomux-mx25.h, but it can be removed for >> everything else (I still have to carry out one

Re: [U-Boot] [PATCH V3] imx: mx25: Remove SION bit in all pin-mux that are safe

2018-01-25 Thread Michael Nazzareno Trimarchi
k fine and clock stretching detection is > automatic and would always need the input state), the need for these > advanced I²C features can be considered board-specific, so SION would > still not be required in iomux-mx25.h. > > In the end, for this p

Re: [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux

2018-01-25 Thread Michael Nazzareno Trimarchi
Hi On Thu, Jan 25, 2018 at 11:02 AM, Benoît Thébaudeau <ben...@wsystem.com> wrote: > Hi Michael, > > On 25/01/2018 at 06:47, Michael Nazzareno Trimarchi wrote: >> On 25 Jan. 2018 12:07 am, "Fabio Estevam" <feste...@gmail.com >> <mailto:feste

  1   2   >