> On 19 Apr 2019, at 12.11, Patrick DELAUNAY wrote:
>
> Hi Alex,
>
>>
>> This converts the following to Kconfig:
>> CONFIG_SUPPORT_EMMC_BOOT
>>
>> Signed-off-by: Alex Kiernan
>> ---
>> Green travis build:
>>
>> https://travis-ci.org/akiernan/u-boot/builds/521906850
>>
>> Testing affecte
> On 13 Mar 2019, at 15.42, Stefano Babic wrote:
>
> On 13/03/19 14:01, Heiko Schocher wrote:
>> Hello Stefano,
>>
>> Am 13.03.2019 um 11:04 schrieb Stefano Babic:
>>> Hi Ian,
>>>
>>> On 31/01/19 15:21, Ian Ray wrote:
Since 2018.11, the pattern of bootcount load and store has changed suc
> On 28 Nov 2018, at 0.00, Philipp Tomsich
> wrote:
>
>
> On one of our application-specific carrier boards, a MicroCrystal
> RV3029 acts as an off-module battery-backed RTC for the RK3399-Q7.
> The RV3029 is intended both to provide RTC services (to Linux) and
> to store the bootcount in its
> On 11 Feb 2018, at 14.06, Alex Kiernan wrote:
>
> CONFIG_BOOTCOUNT was only used in mx53ppd, merge it with
> CONFIG_BOOTCOUNT_LIMIT
>
> Signed-off-by: Alex Kiernan
Reviewed-by: Ian Ray
> ---
>
> configs/mx53ppd_defconfig | 1 -
> drivers/bootcount/Kconfig | 9 +
> 2 files changed,
> On 10 Feb 2018, at 12.20, Lukasz Majewski wrote:
>
> This commit gives the opportunity to reuse the CONFIG_SYS_BOOTCOUNT_ADDR
> Kconfig entry also for boards, which do not use EXT as a storage for
> bootcount (i.e. on flash ones).
>
> Signed-off-by: Lukasz Majewski
>
Reviewed-by: Ian Ray
> On 11 Feb 2018, at 21.23, Alex Kiernan wrote:
>
> On Fri, Feb 9, 2018 at 10:53 PM, Lukasz Majewski wrote:
>> This converts the following to Kconfig:
>> CONFIG_SYS_BOOTCOUNT_SINGLEWORD
>>
>> Signed-off-by: Lukasz Majewski
>> ---
>>
>> configs/highbank_defconfig | 1 +
>> drivers/bootcount/
On 21/02/17 17:31, Stefano Babic wrote:
>On 21/02/2017 02:56, Ken Lin wrote:
>> Add the delay (10ms) to ensure the clock is stable and to meet the clock-to-
>reset(1ms) requirement recommended in the AR8033 datasheet
>>
>> Signed-off-by: Ken Lin
>> ---
>> Changes from v1
>> - Fix the missing Signe
On 21/02/2017 17:31, Stefano Babic wrote:
>On 21/02/2017 02:56, Ken Lin wrote:
>> Apply the proper setting for the reserved bits in SetDes Test and System Mode
>Control register
>> to avoid the voltage peak issue while we do the IEEE PHY comformance test
>>
>> Signed-off-by: Ken Lin
>> ---
>> Chan
8 matches
Mail list logo