Re: [U-Boot] Is somebody workin on getting the AT91SAM9G45EKES working on the latest build?

Bill, On 06/30/2011 04:54 PM, William C. Landolina wrote: I start with Atmel's vanilla first stage boot from NAND. I have a much hacked SDCard boot that works as well and that is where I want to head. My target systems do not have NAND or Dataflash. (I can put NAND on my boards

Re: [U-Boot] Is somebody workin on getting the AT91SAM9G45EKES working on the latest build?

Bill, On 06/30/2011 02:10 PM, William C. Landolina wrote: Alex - If there is anything I can do to help please let me know. I've been roughly patching the various builds for a while and really would like to see this get back in the mainline. I will send my patch set in a few moments

[U-Boot] Is somebody workin on getting the AT91SAM9G45EKES working on the latest build?

I need the AT91SAM9G45 port - if I need to bring it up to date to keep it among the living I will volunteer, but if one of the usual AT91 maintainers is already working on it I suspect they can do it more easily than I. I can start work on the 9G45 update in early July if necessary. Thanks,

Re: [U-Boot] 2010.09-rc1 SD/MMC tested on Atmel AT91SAM9G45EKES - works

Dear William C. Landolina, snip UB-X1 mmcinfo mci: setting clock 260416 Hz, block size 512 mci: setting clock 260416 Hz, block size 512 mci: setting clock 260416 Hz, block size 512 gen_atmel_mci: CMDR 1048 ( 8) ARGR 01aa (SR: 0c100025) Command Failed Seems the card does

[U-Boot] fs/fat.c - file sizes incorrectly printed for files greater than 2G

Fatls prints negative numbers for file sizes larger than 2GiB because the format statements where dentptr-size are referenced all use %ld rather than %lu formats. There appear to be four places in fs/fat.c where this occurs. - Bill. ___ U-Boot

[U-Boot] 2010.09-rc1 SD/MMC tested on Atmel AT91SAM9G45EKES - works

Reinhard - FYI, your 2010.09-rc1 SD/MMC patches work on an Atmel 9G45 evaluation kit. I customized the board and configuration files following the directions in README.atmel_mci and everything works as expected. I included the console output from a test boot below in case there is some

Re: [U-Boot] [PATCH] AT91SAM9260/9XE: add support for MultiMedia Card Interface (MCI)

What is the status of this patch for getting MCI working on SAM9 CPUs? I am working on a new AT91SAM9G45 board and would like to incorporate it if it is ready for prime time. It is not clear to me who should be signing off on this patch and if they have done so. If there is work to be done

Re: [U-Boot] RTC value corruption on QIL-A9G20 startup

-Original Message- From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Albin Tonnerre Sent: Tuesday, August 25, 2009 12:49 PM To: u-boot@lists.denx.de Subject: Re: [U-Boot] RTC value corruption on QIL-A9G20 startup On Tue, Aug 25, 2009 at