> -Original Message-
> From: Michael Walle
> Sent: 2021年6月2日 15:03
> To: Y.b. Lu
> Cc: u-boot@lists.denx.de; Peng Fan ; Priyanka Jain
> ; Shengzhou Liu ; Pramod
> Kumar ; Rajesh Bhagat
> ; Andy Tang ; Ashish Kumar
> ; Meenakshi Aggarwal
>
> Subject: Re:
Hi Jaehoon,
> -Original Message-
> From: Jaehoon Chung
> Sent: 2021年6月2日 14:58
> To: Y.b. Lu ; u-boot@lists.denx.de; Peng Fan
>
> Cc: Priyanka Jain ; Shengzhou Liu
> ; Michael Walle ; Pramod
> Kumar ; Rajesh Bhagat
> ; Andy Tang ; Ashish Kumar
> ; Meena
May I know the status of the patch?
Thanks.
> -Original Message-
> From: Y.b. Lu
> Sent: 2021年5月14日 10:25
> To: Priyanka Jain ; Meenakshi Aggarwal
>
> Cc: u-boot@lists.denx.de
> Subject: RE: [PATCH] arm: dts: lx2162aqds: support eMMC HS400 mode on
> esdhc1
&g
May I know the status of the patch?
Thanks.
> -Original Message-
> From: Y.b. Lu
> Sent: 2021年5月14日 10:25
> To: Priyanka Jain ; Meenakshi Aggarwal
>
> Cc: u-boot@lists.denx.de
> Subject: RE: [PATCH] armv8: layerscape: enable eMMC HS400 workarounds for
> LX2160A/L
Sent out v2 to update copyright.
Any comments on v2.
Thank you.
> -Original Message-
> From: Yangbo Lu
> Sent: 2021年4月27日 16:28
> To: u-boot@lists.denx.de; Priyanka Jain ; Meenakshi
> Aggarwal
> Cc: Y.b. Lu
> Subject: [PATCH] arm: dts: lx2162aqds: support eMMC
Any comments.
Thanks!
> -Original Message-
> From: Yangbo Lu
> Sent: 2021年4月27日 16:42
> To: u-boot@lists.denx.de; Priyanka Jain ; Meenakshi
> Aggarwal
> Cc: Y.b. Lu
> Subject: [PATCH] armv8: layerscape: enable eMMC HS400 workarounds for
> LX2160A/LX2162
Hi Tom,
> -Original Message-
> From: U-Boot On Behalf Of Tom Rini
> Sent: Sunday, February 21, 2021 9:07 AM
> To: u-boot@lists.denx.de
> Cc: Priyanka Jain
> Subject: [PATCH 55/57] ppc: Remove T1023RDB board
>
> This board has not been converted to CONFIG_DM_MMC by the deadline.
>
Hi Tom,
> -Original Message-
> From: U-Boot On Behalf Of Tom Rini
> Sent: Sunday, February 21, 2021 9:07 AM
> To: u-boot@lists.denx.de
> Cc: Priyanka Jain
> Subject: [PATCH 56/57] ppc: Remove T4160RDB board
>
> This board has not been converted to CONFIG_DM_MMC by the deadline.
>
Hi Tom,
> -Original Message-
> From: U-Boot On Behalf Of Priyanka Jain
> Sent: Monday, February 22, 2021 2:17 PM
> To: Tom Rini ; u-boot@lists.denx.de
> Cc: Jiafei Pan ; Xiaobo Xie ;
> Poonam Aggrwal
> Subject: RE: [PATCH 42/57] ppc: Remove T1040RDB boards
>
> >-Original
Hi Peng,
Any comments on the patches.
Thanks.
Best regards,
Yangbo Lu
> -Original Message-
> From: Yangbo Lu
> Sent: Tuesday, October 20, 2020 11:05 AM
> To: u-boot@lists.denx.de; Peng Fan ; 'Jaehoon Chung'
>
> Cc: Y.b. Lu
> Subject: [v2, 0/2] mmc: fsl_esdhc:
Hi Meenakshi,
> -Original Message-
> From: U-Boot On Behalf Of
> meenakshi.aggar...@nxp.com
> Sent: Monday, September 7, 2020 6:12 PM
> To: u-boot@lists.denx.de; Priyanka Jain
> Cc: Varun Sethi ; Meenakshi Aggarwal
>
> Subject: [PATCH v3 1/2] armv8: lx2162a: Add Soc changes to support
Hi Jaehoon,
> -Original Message-
> From: Jaehoon Chung
> Sent: Tuesday, October 20, 2020 5:52 AM
> To: Y.b. Lu ; u-boot@lists.denx.de; Peng Fan
>
> Subject: Re: [PATCH 2/2] mmc: fsl_esdhc: make sure delay chain locked for
> HS400
>
> Dear Yangbo,
>
>
Hi Jaehoon and Peng,
Any comments on the v4 patch-set?
Thank you.
Best regards,
Yangbo Lu
> -Original Message-
> From: Yangbo Lu
> Sent: Tuesday, September 1, 2020 4:58 PM
> To: u-boot@lists.denx.de; Peng Fan ; Priyanka Jain
> ; 'Jaehoon Chung'
> Cc: Y.b. Lu
>
Hi Jaehoon,
> -Original Message-
> From: Jaehoon Chung
> Sent: Tuesday, August 25, 2020 6:54 AM
> To: Y.b. Lu ; u-boot@lists.denx.de; Peng Fan
> ; Priyanka Jain
> Subject: Re: [v3, 06/11] mmc: add a mmc_hs400_prepare_ddr() interface
>
> On 7/23/20 1:30 PM,
Hi Jaehoon,
> -Original Message-
> From: Jaehoon Chung
> Sent: Tuesday, August 25, 2020 6:54 AM
> To: Y.b. Lu ; u-boot@lists.denx.de; Peng Fan
> ; Priyanka Jain
> Subject: Re: [v3, 05/11] mmc: add a hs400_tuning flag
>
> On 7/23/20 1:30 PM, Yangbo Lu wrote:
Any commets on the v3 patch-set.
Thanks!
Best regards,
Yangbo Lu
> -Original Message-
> From: Yangbo Lu
> Sent: Thursday, July 23, 2020 12:30 PM
> To: u-boot@lists.denx.de; Peng Fan ; Priyanka Jain
> ; 'Jaehoon Chung'
> Cc: Y.b. Lu
> Subject: [v3, 00/11] mmc: fs
Hi Peng,
> -Original Message-
> From: Peng Fan
> Sent: Monday, July 20, 2020 9:45 AM
> To: Y.b. Lu ; u-boot@lists.denx.de; Priyanka Jain
> ; 'Jaehoon Chung'
> Cc: Y.b. Lu
> Subject: RE: [v2, 10/11] arm: dts: lx2160ardb: support eMMC HS400 mode
>
> >
Hi Peng,
> -Original Message-
> From: Peng Fan
> Sent: Monday, July 20, 2020 9:42 AM
> To: Y.b. Lu ; u-boot@lists.denx.de; Priyanka Jain
> ; 'Jaehoon Chung'
> Cc: Y.b. Lu
> Subject: RE: [v2, 07/11] mmc: fsl_esdhc: support eMMC HS400 mode
>
> > Subje
Hi Peng,
> -Original Message-
> From: Peng Fan
> Sent: Monday, July 20, 2020 9:40 AM
> To: Y.b. Lu ; u-boot@lists.denx.de; Priyanka Jain
> ; 'Jaehoon Chung'
> Cc: Y.b. Lu
> Subject: RE: [v2, 06/11] mmc: add a mmc_hs400_prepare_ddr() interface
>
> >
Hi Peng,
> -Original Message-
> From: Peng Fan
> Sent: Monday, July 20, 2020 9:37 AM
> To: Y.b. Lu ; u-boot@lists.denx.de; Priyanka Jain
> ; 'Jaehoon Chung'
> Cc: Y.b. Lu
> Subject: RE: [v2, 05/11] mmc: add a hs400_tuning flag
>
> > Subject: [v2, 05/11
Hi Peng,
> -Original Message-
> From: Peng Fan
> Sent: Monday, July 20, 2020 9:33 AM
> To: Y.b. Lu ; u-boot@lists.denx.de; Priyanka Jain
> ; 'Jaehoon Chung'
> Cc: Y.b. Lu
> Subject: RE: [v2, 01/11] mmc: add a reinit() API
>
> > Subject: [v2,
-Original Message-
> From: Jaehoon Chung
> Sent: Friday, July 17, 2020 8:31 AM
> To: Y.b. Lu ; u-boot@lists.denx.de; Peng Fan
> ; Priyanka Jain
> Subject: Re: [PATCH 0/9] mmc: fsl_esdhc: support eMMC HS200/HS400 modes
>
> Hi Yangbo,
>
> On 7/16/20 11:29 AM, Yangbo
CC Xiaobo, Jiafei
> -Original Message-
> From: Y.b. Lu
> Sent: Monday, July 6, 2020 10:47 AM
> To: u-boot@lists.denx.de; Priyanka Jain ; Peng Fan
>
> Subject: RE: [PATCH 0/4] Move eSDHC adapter card code to board files
>
> Hi Priyanka,
>
> Any comments on
Hi Priyanka,
Any comments on this patch-set?
Thanks a lot.
Best regards,
Yangbo Lu
> -Original Message-
> From: Yangbo Lu
> Sent: Wednesday, June 17, 2020 6:09 PM
> To: u-boot@lists.denx.de; Priyanka Jain ; Peng Fan
>
> Cc: Y.b. Lu
> Subject: [PATCH 0/4] Move eS
Hi Jaehoon,
> -Original Message-
> From: Jaehoon Chung
> Sent: Thursday, March 19, 2020 5:01 PM
> To: Y.b. Lu ; u-boot@lists.denx.de; Priyanka Jain
>
> Subject: Re: [PATCH] configs: disable eMMC HS200 support on layerscape
> platforms
>
> Hi,
>
>
Any comments?
Thanks!
Best regards,
Yangbo Lu
> -Original Message-
> From: Yangbo Lu
> Sent: Tuesday, March 3, 2020 10:33 AM
> To: u-boot@lists.denx.de; Priyanka Jain
> Cc: Y.b. Lu
> Subject: [PATCH] configs: disable eMMC HS200 support on layerscape
> platform
> -Original Message-
> From: Peng Fan
> Sent: Wednesday, February 5, 2020 3:08 PM
> To: Rasmus Villemoes ; u-boot@lists.denx.de;
> Y.b. Lu
> Cc: Mario Six
> Subject: RE: [PATCH] mmc: fsl_esdhc: actually enable cache snooping on
> mpc830x
>
> > Subject:
Hi Peng and Priyanka,
Happy new year!
Could you help to review this patch-set? It's related to MMC and QorIQ
PowerPC/ARM.
Thanks.
Best regards,
Yangbo Lu
> -Original Message-
> From: Y.b. Lu
> Sent: Friday, December 20, 2019 11:56 AM
> To: Yangbo Lu ; u-boot@lists.denx.d
Here is CI build result.
https://travis-ci.org/yangbolu1991/u-boot-test/builds/627093385
Thanks.
> -Original Message-
> From: Yangbo Lu
> Sent: Thursday, December 19, 2019 6:59 PM
> To: u-boot@lists.denx.de
> Cc: Peng Fan ; Priyanka Jain ;
> Wolfgang Denk ; Y.b. Lu
&
Any comments?
Thanks.
> -Original Message-
> From: Yangbo Lu
> Sent: Tuesday, November 12, 2019 7:29 PM
> To: u-boot@lists.denx.de
> Cc: Peng Fan ; Feng Li ; Alison
> Wang ; Sumit Garg ; Priyanka
> Jain ; Mario Six ; Y.b. Lu
>
> Subject: [PATCH 0/4] Drop red
9 6:54 PM
> To: u-boot@lists.denx.de; Peng Fan
> Cc: Y.b. Lu
> Subject: [PATCH 0/7] mmc: fsl_esdhc: clean up and shrink the driver
>
> This patch-set is to clean up and shrink the fsl_esdhc driver.
>
> Yangbo Lu (7):
> mmc: fsl_esdhc: drop controller initialization in fs
Any comments?
Thanks a lot.
Best regards,
Yangbo Lu
> -Original Message-
> From: Yangbo Lu
> Sent: Monday, October 21, 2019 6:09 PM
> To: u-boot@lists.denx.de; Peng Fan
> Cc: Y.b. Lu
> Subject: [PATCH 0/3] mmc: fsl_esdhc: clean up driver
>
> This patch-s
Hi Peng,
Any comments on this patch-set?
Thanks a lot.
Best regards,
Yangbo Lu
> -Original Message-
> From: Yangbo Lu
> Sent: Friday, September 6, 2019 2:05 PM
> To: u-boot@lists.denx.de; Peng Fan
> Cc: Y.b. Lu
> Subject: [v2, 0/3] mmc: fsl_esdhc: clean up code
&
Hi,
> -Original Message-
> From: Peng Fan
> Sent: Tuesday, September 10, 2019 9:29 AM
> To: Sébastien Szymanski ;
> u-boot@lists.denx.de; Y.b. Lu
> Cc: Fabio Estevam ; Otavio Salvador
>
> Subject: RE: [PATCH 1/2] Convert CONFIG_SYS_FSL_ESDHC_HAS_DDR_MOD
Hi Peng,
> -Original Message-
> From: Peng Fan
> Sent: Friday, September 6, 2019 10:12 AM
> To: Y.b. Lu ; u-boot@lists.denx.de
> Subject: RE: [PATCH 0/3] mmc: fsl_esdhc: clean up code
>
> > Subject: RE: [PATCH 0/3] mmc: fsl_esdhc: clean up code
> >
> &g
Any comments?
Thanks:)
> -Original Message-
> From: Yangbo Lu
> Sent: Monday, August 19, 2019 4:28 PM
> To: u-boot@lists.denx.de; Peng Fan
> Cc: Y.b. Lu
> Subject: [PATCH 0/3] mmc: fsl_esdhc: clean up code
>
> This patch-set is to clean up fsl_esdhc code.
>
Hi Lukasz,
Sorry for my late response. Please see my comments inline.
> -Original Message-
> From: Lukasz Majewski
> Sent: Friday, August 23, 2019 4:45 PM
> To: Y.b. Lu
> Cc: u-boot@lists.denx.de; Peng Fan
> Subject: Re: [U-Boot] [PATCH 2/3] mmc: fsl_esdhc: clean u
Hi Angelo,
> -Original Message-
> From: Angelo Dureghello
> Sent: 2019年6月23日 5:43
> To: Y.b. Lu
> Cc: u-boot@lists.denx.de
> Subject: Re: [v3, 5/5] mmc: fsl_esdhc_imx: drop useless code
>
> Hi Lu,
>
> On Mon, Jun 03, 2019 at 04:28:24A
> -Original Message-
> From: Y.b. Lu
> Sent: 2019年6月20日 11:34
> To: Lukasz Majewski
> Cc: u-boot@lists.denx.de; Stefano Babic ; Fabio Estevam
> ; dl-uboot-imx ; Albert Aribaud
> ; Eddy Petrișor ;
> Akshay Bhat ; Ken Lin
> ; Heiko Schocher ; Christian
> Gm
> -Original Message-
> From: Lukasz Majewski
> Sent: 2019年6月19日 14:48
> To: Y.b. Lu
> Cc: u-boot@lists.denx.de; Stefano Babic ; Fabio Estevam
> ; dl-uboot-imx ; Albert Aribaud
> ; Eddy Petrișor ;
> Akshay Bhat ; Ken Lin
> ; Heiko Schocher ; Christian
> Gm
Hi,
> -Original Message-
> From: Angelo Dureghello
> Sent: 2019年5月31日 15:15
> To: Y.b. Lu
> Cc: u-boot@lists.denx.de
> Subject: Re: [v3, 5/5] mmc: fsl_esdhc_imx: drop useless code
>
> Hi Lu,
>
> On Fri, May 31, 2019 at 06:12:12AM +
Hi Angelo,
> -Original Message-
> From: Angelo Dureghello
> Sent: 2019年5月31日 2:23
> To: Y.b. Lu
> Cc: u-boot@lists.denx.de; Stefano Babic ; Fabio Estevam
> ; dl-uboot-imx ; Albert Aribaud
> ; Eddy Petrișor ;
> Akshay Bhat ; Ken Lin
> ; Heiko Schocher ; Christi
Hi Lukasz,
> -Original Message-
> From: Lukasz Majewski
> Sent: 2019年5月29日 20:54
> To: Y.b. Lu
> Cc: u-boot@lists.denx.de; Stefano Babic ; Fabio Estevam
> ; dl-uboot-imx ; Albert Aribaud
> ; Eddy Petrișor ;
> Akshay Bhat ; Ken Lin
> ; Heiko Schocher ; Christi
> -Original Message-
> From: Y.b. Lu
> Sent: 2019年5月29日 15:10
> To: Lukasz Majewski
> Cc: u-boot@lists.denx.de; Stefano Babic ; Fabio Estevam
> ; dl-uboot-imx ; Albert Aribaud
> ; Eddy Petrișor ;
> Akshay Bhat ; Ken Lin
> ; Heiko Schocher ; Christian
> Gm
Dropped useless code for i.MX eSDHC driver.
Signed-off-by: Yangbo Lu
Tested-by: Steffen Dirkwinkel
Reviewed-by: Peng Fan
---
Changes for v2:
- Added this patch.
Changes for v3:
- None.
Changes for v4:
- Dropped PPC code introduced recently.
---
Dropped i.MX code which couldn't be reused.
Signed-off-by: Yangbo Lu
Tested-by: Steffen Dirkwinkel
Acked-by: Peng Fan
---
Changes for v2:
- Added this patch.
Changes for v3:
- Rebased.
Changes for v4:
- Rebased.
- Added Tested-by/Acked-by.
---
Moved CONFIG_FSL_ESDHC from header files to defconfig files.
Signed-off-by: Yangbo Lu
Tested-by: Steffen Dirkwinkel
Reviewed-by: Peng Fan
Reviewed-by: Lukasz Majewski
Acked-by: Jason Liu
---
Changes for v2:
- Rebased.
Changes for v3:
- Rebased.
Changes for v4:
- Added
The fsl_esdhc driver was for Freescale eSDHC on MPC83XX/MPC85XX
initially. The later QoriQ series PowerPC processors (which were
evolutions of MPC83XX/MPC85XX), QorIQ series ARM processors, and
i.MX series processors were using this driver for their eSDHCs too.
For the two series processors, the
The fsl_esdhc driver was for Freescale eSDHC on MPC83XX/MPC85XX
initially. The later QoriQ series PowerPC processors (which were
evolutions of MPC83XX/MPC85XX), QorIQ series ARM processors, and
i.MX series processors were using this driver for their eSDHCs too.
For the two series processors, the
> -Original Message-
> From: Lukasz Majewski
> Sent: 2019年5月29日 14:43
> To: Y.b. Lu
> Cc: u-boot@lists.denx.de; Stefano Babic ; Fabio Estevam
> ; dl-uboot-imx ; Albert Aribaud
> ; Eddy Petrișor ;
> Akshay Bhat ; Ken Lin
> ; Heiko Schocher ; Christian
> Gm
> -Original Message-
> From: Lukasz Majewski
> Sent: 2019年5月29日 14:40
> To: Y.b. Lu
> Cc: u-boot@lists.denx.de; Stefano Babic ; Fabio Estevam
> ; dl-uboot-imx ; Albert Aribaud
> ; Eddy Petrișor ;
> Akshay Bhat ; Ken Lin
> ; Heiko Schocher ; Christian
> Gm
> -Original Message-
> From: Lukasz Majewski
> Sent: 2019年5月29日 14:30
> To: Y.b. Lu
> Cc: u-boot@lists.denx.de; Stefano Babic ; Fabio Estevam
> ; dl-uboot-imx ; Albert Aribaud
> ; Eddy Petrișor ;
> Akshay Bhat ; Ken Lin
> ; Heiko Schocher ; Christian
> Gm
> -Original Message-
> From: Peng Fan
> Sent: 2019年5月29日 9:53
> To: Y.b. Lu ; u-boot@lists.denx.de
> Cc: Stefano Babic ; Fabio Estevam ;
> dl-uboot-imx ; Albert Aribaud
> ; Eddy Petrișor ;
> Akshay Bhat ; Ken Lin
> ; Heiko Schocher ; Christian
> Gmeiner ; S
> -Original Message-
> From: Lukasz Majewski
> Sent: 2019年5月23日 17:15
> To: linux-kernel-dev
> Cc: Y.b. Lu ; u-boot@lists.denx.de; Steffen Dirkwinkel
> ; Patrick Brünn
> Subject: Re: [U-Boot] [v3, 0/5] Split fsl_esdhc driver for i.MX
>
> Hi
>
> > Hi
The fsl_esdhc driver was for Freescale eSDHC on MPC83XX/MPC85XX
initially. The later QoriQ series PowerPC processors (which were
evolutions of MPC83XX/MPC85XX), QorIQ series ARM processors, and
i.MX series processors were using this driver for their eSDHCs too.
For the two series processors, the
Dropped useless code for i.MX eSDHC driver.
Signed-off-by: Yangbo Lu
---
Changes for v2:
- Added this patch.
Changes for v3:
- None.
---
drivers/mmc/fsl_esdhc_imx.c | 96 ++---
include/fsl_esdhc_imx.h | 4 --
2 files changed, 4 insertions(+),
Dropped i.MX code which couldn't be reused.
Signed-off-by: Yangbo Lu
---
Changes for v2:
- Added this patch.
Changes for v3:
- Rebased.
---
drivers/mmc/fsl_esdhc.c | 609 ++--
include/fsl_esdhc.h | 57
2 files changed, 21
The fsl_esdhc driver was for Freescale eSDHC on MPC83XX/MPC85XX
initially. The later QoriQ series PowerPC processors (which were
evolutions of MPC83XX/MPC85XX), QorIQ series ARM processors, and
i.MX series processors were using this driver for their eSDHCs too.
For the two series processors, the
Moved CONFIG_FSL_ESDHC from header files to defconfig files.
Signed-off-by: Yangbo Lu
---
Changes for v2:
- Rebased.
Changes for v3:
- Rebased.
---
configs/imx8mq_evk_defconfig | 1 +
configs/imx8qm_mek_defconfig | 1 +
to split esdhc driver since it's blocking
new features coding.
Thanks a lot.
Best regards,
Yangbo Lu
> -Original Message-
> From: Y.b. Lu
> Sent: Tuesday, May 14, 2019 7:15 PM
> To: Peng Fan ; u-boot@lists.denx.de; sba...@denx.de
> Cc: Prabhakar Kushwaha
> Subject: R
regards,
Yangbo Lu
> -Original Message-
> From: Peng Fan
> Sent: Monday, April 22, 2019 1:22 PM
> To: Y.b. Lu ; u-boot@lists.denx.de; sba...@denx.de
> Cc: Prabhakar Kushwaha
> Subject: RE: [v2, 0/5] Split fsl_esdhc driver for i.MX
>
> Hi Y.b
>
> Sorry for top
Hi,
May I know whether this patch-set is in reviewing?
Actually it's blocking QorIQ eSDHC UHS-I/HS200 new features development, since
the way of implementation is totally different with i.MX.
Thanks a lot.
Best regards,
Yangbo Lu
> -Original Message-
> From: Y.b. Lu
> Sent:
Hi Stefano,
Did you get any chance to review it?
Thanks.
Best regards,
Yangbo Lu
> -Original Message-
> From: Y.b. Lu
> Sent: Monday, April 8, 2019 11:04 PM
> To: u-boot@lists.denx.de
> Cc: Prabhakar Kushwaha ; Peng Fan
> ; sba...@denx.de
> Subject: RE: [v2, 0/5] S
Any comments?
Thanks a lot :)
> -Original Message-
> From: Y.b. Lu
> Sent: Thursday, March 21, 2019 12:32 PM
> To: u-boot@lists.denx.de
> Cc: Prabhakar Kushwaha ; Peng Fan
> ; sba...@denx.de; Y.b. Lu
> Subject: [v2, 0/5] Split fsl_esdhc driver for i.MX
>
Dropped useless code for i.MX eSDHC driver.
Signed-off-by: Yangbo Lu
---
Changes for v2:
- Added this patch.
---
drivers/mmc/fsl_esdhc_imx.c | 96 ++---
include/fsl_esdhc_imx.h | 4 --
2 files changed, 4 insertions(+), 96 deletions(-)
diff --git
Dropped i.MX code which couldn't be reused.
Signed-off-by: Yangbo Lu
---
Changes for v2:
- Added this patch.
---
drivers/mmc/fsl_esdhc.c | 576 ++--
include/fsl_esdhc.h | 57
2 files changed, 15 insertions(+), 618 deletions(-)
diff --git
The fsl_esdhc driver was for Freescale eSDHC on MPC83XX/MPC85XX
initially. The later QoriQ series PowerPC processors (which were
evolutions of MPC83XX/MPC85XX), QorIQ series ARM processors, and
i.MX series processors were using this driver for their eSDHCs too.
For the two series processors, the
Moved CONFIG_FSL_ESDHC from header files to defconfig files.
Signed-off-by: Yangbo Lu
---
Changes for v2:
- Rebased.
---
configs/imx8mq_evk_defconfig | 1 +
configs/imx8qxp_mek_defconfig | 1 +
configs/kp_imx53_defconfig | 1 +
The fsl_esdhc driver was for Freescale eSDHC on MPC83XX/MPC85XX
initially. The later QoriQ series PowerPC processors (which were
evolutions of MPC83XX/MPC85XX), QorIQ series ARM processors, and
i.MX series processors were using this driver for their eSDHCs too.
For the two series processors, the
Hi Stefano,
> -Original Message-
> From: Stefano Babic
> Sent: Wednesday, March 13, 2019 7:53 PM
> To: Y.b. Lu ; u-boot@lists.denx.de
> Subject: Re: [U-Boot] [PATCH 2/3] mmc: split fsl_esdhc driver for i.MX
>
> Hi Y.B lu,
>
> On 21/02/19 08:55, Y.b. Lu wrot
Thanks a lot, Stefano.
Please let me know if you need me to do anything. Once they are picked up, I
will start the work for driver cleaning up.
Best regards,
Yangbo Lu
> -Original Message-
> From: Stefano Babic
> Sent: Wednesday, March 13, 2019 2:14 AM
> To: Y.b.
Any comments on the patch-set?
Thanks a lot.
> -Original Message-
> From: Y.b. Lu
> Sent: Thursday, February 21, 2019 3:55 PM
> To: u-boot@lists.denx.de
> Cc: Jaehoon Chung ; Prabhakar Kushwaha
> ; Peng Fan ; Lukasz
> Majewski ; Y.b. Lu
> Subject: [PATCH 1/
ght now, I could work on the driver splitting.
> >
> > You can think about having common part (in one file - fsl_esdhc.c) and
> > then separate files with code specific to imx and ppc. This would
> > reduce the number of changes needed.
>
> [Y.b. Lu] Actually, it's not only
The fsl_esdhc driver was for Freescale eSDHC on MPC83XX/MPC85XX
initially. The later QoriQ series PowerPC processors (which were
evolutions of MPC83XX/MPC85XX), QorIQ series ARM processors, and
i.MX series processors were using this driver for their eSDHCs too.
For the two series processors, the
Hi Lukasz,
> -Original Message-
> From: Lukasz Majewski
> Sent: Tuesday, February 19, 2019 2:39 PM
> To: Y.b. Lu
> Cc: u-boot@lists.denx.de
> Subject: Re: [U-Boot] [v2, 1/3] mmc: fsl_esdhc: add esdhc_imx flag
>
> Hi "Y.b. Lu",
>
> >
Moved CONFIG_FSL_ESDHC from header files to defconfig files.
Signed-off-by: Yangbo Lu
---
configs/imx8mq_evk_defconfig | 1 +
configs/imx8qxp_mek_defconfig | 1 +
configs/kp_imx53_defconfig | 1 +
configs/kp_imx6q_tpc_defconfig
Hi Lukasz,
> -Original Message-
> From: Lukasz Majewski
> Sent: Monday, February 18, 2019 7:12 AM
> To: Y.b. Lu
> Cc: u-boot@lists.denx.de
> Subject: Re: [U-Boot] [v2, 1/3] mmc: fsl_esdhc: add esdhc_imx flag
>
> Dear "Y.b. Lu",
>
> > T
> -Original Message-
> From: Peng Fan
> Sent: Thursday, February 14, 2019 5:11 PM
> To: Y.b. Lu ; u-boot@lists.denx.de
> Cc: Jaehoon Chung ; Prabhakar Kushwaha
>
> Subject: RE: [PATCH 1/3] mmc: fsl_esdhc: add esdhc_imx flag
>
>
>
> > -----Ori
The fsl_esdhc driver was for Freescale eSDHC on MPC83XX/MPC85XX
initially. The later QoriQ series processors (which are evolutions
of MPC83XX/MPC85XX) and i.MX series processors were using this
driver for their eSDHCs too.
So there are two evolution directions for eSDHC now. For the two
series
A previous patch had added SDR104/HS200 support for fsl_esdhc.
However this was only for i.MX eSDHC, and QorIQ eSDHC used
different registers and method.
This patch is to clarify i.MX eSDHC specific functions defined
in that patch, and to use them only for i.MX eSDHC. The QorIQ
eSDHC SDR104/HS200
The fsl_esdhc driver was for Freescale eSDHC on MPC83XX/MPC85XX
initially. The later QoriQ series processors (which were evolutions
of MPC83XX/MPC85XX) and i.MX series processors were using this
driver for their eSDHCs too.
So there are two evolution directions for eSDHC now. For the two
series
A previous patch had added SDR104/HS200 support for fsl_esdhc.
However this was only for i.MX eSDHC, and QorIQ eSDHC used
different registers and method.
This patch is to clarify i.MX eSDHC specific functions defined
in that patch, and to use them only for i.MX eSDHC. The QorIQ
eSDHC SDR104/HS200
The fsl_esdhc driver was for Freescale eSDHC on MPC83XX/MPC85XX
initially. The later QoriQ series processors (which are evolutions
of MPC83XX/MPC85XX) and i.MX series processors were using this
driver for their eSDHCs too.
So there are two evolution directions for eSDHC now. For the two
series
The fsl_esdhc driver was for Freescale eSDHC on MPC83XX/MPC85XX
initially. The later QoriQ series processors (which are evolutions
of MPC83XX/MPC85XX) and i.MX series processors were using this
driver for their eSDHCs too.
So there are two evolution directions for eSDHC now. For the two
series
Hi Yinbo,
> -Original Message-
> From: Yinbo Zhu
> Sent: Thursday, November 22, 2018 4:17 PM
> To: york...@freescale.com; Y.B. LU ;
> u-boot@lists.denx.de
> Cc: Yinbo Zhu ; Xiaobo Xie ;
> Chuanhua Han
> Subject: [PATCH v1] LS2080ardb: MMC: disable esdhc for dspi
0, 2018 3:52 PM
> To: Yinbo Zhu ; york...@freescale.com;
> u-boot@lists.denx.de
> Cc: Y.b. Lu ; Xiaobo Xie ; Andy
> Tang ; Peng Ma
> Subject: [PATCH v5 3/8] Enable CONFIG_BLK and CONFIG_DM_MMC to
> Kconfig
>
> This enables the folowing to Kconfig:
> CONFIG_BLK
&
Hi Yinbo,
> -Original Message-
> From: Yinbo Zhu [mailto:yinbo@nxp.com]
> Sent: Friday, August 10, 2018 3:52 PM
> To: Yinbo Zhu ; york...@freescale.com;
> u-boot@lists.denx.de
> Cc: Y.b. Lu ; Xiaobo Xie ; Andy
> Tang ; Peng Ma
> Subject: [PATCH v5 1/8] dm: mmc
Hi Yinbo,
> -Original Message-
> From: York Sun
> Sent: Wednesday, August 8, 2018 6:09 AM
> To: Yinbo Zhu ; york...@freescale.com;
> u-boot@lists.denx.de
> Cc: Y.b. Lu ; Xiaobo Xie ; Andy
> Tang ; Peng Ma
> Subject: Re: [PATCH v4 1/8] armv8: enable BLK code con
Hi Simon,
Sorry for my late response.
Please see my comments inline.
Thanks a lot.
> -Original Message-
> From: s...@google.com [mailto:s...@google.com] On Behalf Of Simon Glass
> Sent: 2017年11月25日 6:36
> To: Y.b. Lu <yangbo...@nxp.com>
> Cc: u-boot@lists.denx.de; J
Sent out v4 patch-set. Please help to review.
Thanks a lot :)
> -Original Message-
> From: York Sun
> Sent: 2017年12月8日 1:34
> To: Y.b. Lu <yangbo...@nxp.com>; u-boot@lists.denx.de
> Subject: Re: [v3] armv8: ls1012a: enable/disable eSDHC1 through hwconfig for
> ne
Hi York,
> -Original Message-
> From: York Sun
> Sent: 2017年12月7日 3:08
> To: Y.b. Lu <yangbo...@nxp.com>; u-boot@lists.denx.de
> Subject: Re: [v3] armv8: ls1012a: enable/disable eSDHC1 through hwconfig for
> new RDB
>
> On 12/06/2017 02:19 AM, Yangbo Lu
Hi York,
Thank you for your suggestion.
I sent out v3 patch which is backward-compatible. Please check.
Thanks a lot.
Best regards,
Yangbo Lu
> -Original Message-
> From: York Sun
> Sent: 2017年12月1日 1:59
> To: Y.b. Lu <yangbo...@nxp.com>; u-boot@lists.denx.de
> C
P switch) is correct for SDHC2 since software doesn’t have way
to check.
Do you think this should be fixed by hardware? If so, I will try to suggest
that.
Thanks a lot.
Best regards,
Yangbo Lu
> -Original Message-
> From: York Sun
> Sent: 2017年11月30日 3:45
> To: Y.b. Lu <yangb
Hi York,
See my comments inline.
Thanks a lot.
Best regards,
Yangbo Lu
> -Original Message-
> From: York Sun
> Sent: 2017年11月30日 3:43
> To: Y.b. Lu <yangbo...@nxp.com>; u-boot@lists.denx.de
> Subject: Re: [PATCH] armv8: ls1088ardb: support force SDHC mode by
>
Any suggestion?
Thanks.
From: Y.b. Lu
Sent: 2017年11月21日 14:11
To: u-boot@lists.denx.de
Cc: 'Simon Glass' <s...@chromium.org>; Jaehoon Chung <jh80.ch...@samsung.com>;
Yinbo Zhu <yinbo@nxp.com>; Xiaobo Xie <xiaobo@nxp.com>
Subject: dm: mmc: fsl_esdhc: D
Hi Simon,
I found your below patch just dropping mmc_create() for probe procedure of DM.
Actually the description seemed to be not the things this patch did.
dm: mmc: fsl_esdhc: Drop mmc_init() call from fsl_esdhc_init()
Do you have any suggestion to fix it?
mmc_create() will allocate mmc
+ York
-Original Message-
From: Yangbo Lu [mailto:yangbo...@nxp.com]
Sent: 2017年11月16日 10:28
To: u-boot@lists.denx.de; Prabhakar Kushwaha <prabhakar.kushw...@nxp.com>;
Sumit Garg <sumit.g...@nxp.com>
Cc: Y.b. Lu <yangbo...@nxp.com>
Subject: [PATCH] armv8: ls1012a: ena
0100128e4 x27: bcd0
x28: fff7a990 x29: 1001f8b0
Resetting CPU ...
resetting ...
Thanks a lot.
Best regards,
Yangbo Lu
-Original Message-
From: York Sun
Sent: 2017年9月18日 22:58
To: Y.b. Lu <yangbo...@nxp.com>; u-boot@lists.denx.de
Subject: Re: [PATCH] armv8:
Hi York,
Thanks for your comments.
The v2 patch had been sent out.
Best regards,
Yangbo Lu
-Original Message-
From: York Sun
Sent: 2017年9月15日 5:18
To: Y.b. Lu <yangbo...@nxp.com>; u-boot@lists.denx.de
Subject: Re: [PATCH] armv8: ls1043a: disable IFC in SPL only when QSPI is used
> -Original Message-
> From: Bin Meng [mailto:bmeng...@gmail.com]
> Sent: Wednesday, August 23, 2017 1:29 PM
> To: Y.b. Lu
> Cc: Qiang Zhao; York Sun; Grygorii Strashko; Michal Simek; Angelo
> Dureghello; Kever Yang; Jaehoon Chung; Albert Aribaud; Marcel Ziswiler;
&g
1 - 100 of 117 matches
Mail list logo
