in the env_common.c file. As a result I was starting out with
duplicate variables before every setting 'ipaddr'.
dbrazeau wrote:
For some variables, for example ipaddr, when I try to change them using
setenv it does not update the current ipaddr variable in RAM it
creates a new one and append
Yes, I do mean PCIe. Sorry should have mentioned that.
wd wrote:
Dear dbrazeau,
In message 25389144.p...@talk.nabble.com you wrote:
I'm trying to get my ppc440spe (Katmai) board to initialize in PCI
adapter
mode. I was hoping that someone could give me some pointers on what
changes
I'm trying to get my ppc440spe (Katmai) board to initialize in PCI adapter
mode. I was hoping that someone could give me some pointers on what changes
I need in the katmai config file, i.e. do I need to define
CONFIG_SYS_PCI_MASTER_INIT. Also I noticed that some ppc4xx have
PCI_HOST_ADAPTER
Correct me if I'm wrong, but I thought I read in some document that you can
set some environment variable that will load the image from an alternate
location (address) after failing to boot the image at the primary location.
I was just wondering if someone could give me some details about this
tried adding
the device number with no luck. I'm using U-boot version 2009.06-rc1.
Thanks.
Detlev Zundel wrote:
Hi dbrazeau,
This is the command I try to execute in the U-boot console:
fatload xsa 0 0x100 /mnt-xsa/someprogram.img
output:
** Invalid boot device **
Do you
0x14 but that didn't work either. Am I doing
something wrong? Any Ideas? Thanks for you help.
Stefan Roese wrote:
On Friday 14 August 2009 17:56:07 dbrazeau wrote:
I working on the Katmai board. I'm trying to run a program in the 16MB
boot flash. The user manual states the U-boot
Ok. Thanks for your input.
wd wrote:
Dear dbrazeau,
In message 24975016.p...@talk.nabble.com you wrote:
I actually tried used ace as well, since I saw it being used in some of
the
environment variables. Unfortunately that didn't work either, but had a
different error.
fatload ace
This is the command I try to execute in the U-boot console:
fatload xsa 0 0x100 /mnt-xsa/someprogram.img
output:
** Invalid boot device **
Detlev Zundel wrote:
Hi dbrazeau,
I am trying to run a standalone program from flash but I keep receiving
**
Invalid boot device
Hi. I'm planning on using a IDT PCIe switch on our custom board with a
PPC_460 cpu. I have searched the internet and haven't found much in the way
of references of using a IDT PCIe switch and a PPC with U-boot. I was just
wondering if I should expect any issue with U-Boot/Linux communicating
I am trying to run a standalone program from flash but I keep receiving **
Invalid boot device ** when I attempt to load it into memory. I think I'm
just using the wrong device number. I was wondering if there was any way to
print the devices that U-boot can see, so I can figure out dev:part
10 matches
Mail list logo