Liu shengzhou@freescale.com
wrote:
RTL8211F needs to enalbe TXDLY for RGMII during phy initialization, so
move it to rtl8211f_config for early initialization.
Signed-off-by: Shengzhou Liu shengzhou@freescale.com
cc: Joe Hershberger joe.hershber...@gmail.com
---
drivers/net/phy
-Original Message-
From: Sun York-R58495
Sent: Friday, April 17, 2015 3:22 AM
To: Liu Shengzhou-B36685; u-boot@lists.denx.de
Subject: Re: [PATCH v4] powerpc/t1023rdb: Add T1023 RDB board support
On 03/27/2015 12:48 AM, Shengzhou Liu wrote:
T1023RDB is a Freescale Reference
-Original Message-
From: Shengzhou Liu [mailto:shengzhou@freescale.com]
Sent: Monday, November 10, 2014 6:32 PM
To: u-boot@lists.denx.de; Sun York-R58495; joe.hershber...@gmail.com
Cc: Liu Shengzhou-B36685
Subject: [PATCH v7] net/phy: Add support for CS4315/CS4340 PHY
The link
-Original Message-
From: Shengzhou Liu [mailto:shengzhou@freescale.com]
Sent: Wednesday, November 05, 2014 1:33 PM
To: u-boot@lists.denx.de; Sun York-R58495; joe.hershber...@gmail.com
Cc: Liu Shengzhou-B36685
Subject: [PATCH v6] net/phy: Add support for CS4315/CS4340 PHY
The
-Original Message-
From: Shengzhou Liu [mailto:shengzhou@freescale.com]
Sent: Thursday, October 23, 2014 5:21 PM
To: u-boot@lists.denx.de; Sun York-R58495
Cc: Liu Shengzhou-B36685; Xie Shaohui-B21989
Subject: [PATCH 1/4] net/fm: add 2.5G SGMII support
[Shengzhou] This is a
; Sun York-R58495
Subject: [U-Boot] [PATCH] powerpc/t1040: fix i2c2 address on t1040qds
and t104xrdb
The base address of I2C2 is 0x118100 instead of 0x119000.
Signed-off-by: Shengzhou Liu shengzhou@freescale.com
---
include/configs/T1040QDS.h | 2 +-
include/configs/T104xRDB.h | 2
-Original Message-
From: Sun York-R58495
Sent: Saturday, March 01, 2014 12:48 AM
To: Liu Shengzhou-B36685; u-boot@lists.denx.de
Subject: Re: [PATCH] powerpc/t2080rdb: Add T2080PCIe-RDB board support
On 02/28/2014 02:21 AM, Shengzhou Liu wrote:
Shengzhou,
I have said with
When replying the original email, outlook added automatically underline at some
strings with @, such as u-boot@lists.denx.de.
You can try to remove the underline.
Regards,
Shengzhou
-Original Message-
From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de]
On
instead of directly puting mtd
partitions nodes in device tree.
Signed-off-by: Shengzhou Liu shengzhou@freescale.com
Please hold on the patch due to compiling issue until we finish the transition
from size 512KB to 768KB.
-Shengzhou
___
U-Boot
parameters for whole frequency range from 1500MT/s to
2140MT/s.
- remove unused patameters: 'cpo', 'wrdata delay', '2T', which is
unrelated
to DDR3/3L on t2080qds.
- remove unused rdimm code(only udimm is supported on t2080qds).
Signed-off-by: Shengzhou Liu shengzhou@freescale.com
10 matches
Mail list logo