Re: [U-Boot] [PULL] [Update] Please pull u-boot-imx

[Fabio Estevam]

Hi Stefano,

On Fri, Mar 9, 2018 at 6:20 PM, Stefano Babic  wrote:

> Yes, I saw Brian's post for HAB, and there are a couple from Jagan that
> I'll pick up. I will send a new PR, then.

Patches 1/3 and 2/3 from Bryan look good.

We have some concerns about patch 3/3 and Breno will reply to this patch soon.

Thanks
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Re: [U-Boot] [PULL] [Update] Please pull u-boot-imx

[Stefano Babic]

Hi Tom,

On 09/03/2018 21:42, Tom Rini wrote:
> On Fri, Mar 09, 2018 at 01:10:53PM +0100, Stefano Babic wrote:
> 
>> Hi Tom,
>>
>> as discussed: this contains two fixes that should go into release - thanks !
>>
>>
>> The following changes since commit 5e62f828256d66e2b28def4f9ef20a2a05c2d04f:
>>
>>   Prepare v2018.03-rc4 (2018-03-05 20:27:08 -0500)
>>
>> are available in the git repository at:
>>
>>   git://www.denx.de/git/u-boot-imx.git master
>>
>> for you to fetch changes up to 314d9f7e3eff41873011d9a0687f469680a00074:
>>
>>   imx: syscounter: make sure asm is volatile (2018-03-09 13:06:14 +0100)
>>
> 
> Note that I expect another PR with other fixes that just got posted
> today, but, applied to u-boot/master, thanks!


Yes, I saw Brian's post for HAB, and there are a couple from Jagan that
I'll pick up. I will send a new PR, then.

Stefano

-- 
=
DENX Software Engineering GmbH,  Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Re: [U-Boot] [PULL] [Update] Please pull u-boot-imx

[Tom Rini]

On Fri, Mar 09, 2018 at 01:10:53PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> as discussed: this contains two fixes that should go into release - thanks !
> 
> 
> The following changes since commit 5e62f828256d66e2b28def4f9ef20a2a05c2d04f:
> 
>   Prepare v2018.03-rc4 (2018-03-05 20:27:08 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 314d9f7e3eff41873011d9a0687f469680a00074:
> 
>   imx: syscounter: make sure asm is volatile (2018-03-09 13:06:14 +0100)
> 

Note that I expect another PR with other fixes that just got posted
today, but, applied to u-boot/master, thanks!

-- 
Tom


signature.asc
Description: PGP signature
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

[U-Boot] [PULL] [Update] Please pull u-boot-imx

[Stefano Babic]

Hi Tom,

as discussed: this contains two fixes that should go into release - thanks !


The following changes since commit 5e62f828256d66e2b28def4f9ef20a2a05c2d04f:

  Prepare v2018.03-rc4 (2018-03-05 20:27:08 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 314d9f7e3eff41873011d9a0687f469680a00074:

  imx: syscounter: make sure asm is volatile (2018-03-09 13:06:14 +0100)


Fabio Estevam (1):
  imximage: Remove failure when no IVT offset is found

Yasushi SHOJI (1):
  imx: syscounter: make sure asm is volatile

 arch/arm/mach-imx/syscounter.c | 4 ++--
 tools/imximage.c   | 5 -
 2 files changed, 2 insertions(+), 7 deletions(-)

Stefano

-- 
=
DENX Software Engineering GmbH,  Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Re: [U-Boot] [PULL][Update] Please pull u-boot-imx

[Stefano Babic]

On 24/02/2018 16:58, Stefano Babic wrote:
> Hi Tom,
> 
> some fixes, please pull from u-boot-imx, thanks!
> 

Two fixes (Jagan's and Fabio's) were missing, new PR includes them:

The following changes since commit 02b0895c215e252cff50d9edf53a972d2bbbfd30:

  Merge git://git.denx.de/u-boot-sh (2018-02-17 16:06:59 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 0339086bd9b99ae354c26e8758d5bab51ef84a3a:

  imx: spl: Partially revert "spl: eMMC/SD: Provide one __weak
spl_boot_mode() function" (2018-02-24 19:33:32 +0100)


Breno Lima (2):
  imx: hab: Keep CAAM clock enabled after authenticating additional
images
  arm: imx: hab: Define HAB_RVT_BASE according to the processor version

Fabio Estevam (2):
  mx6sabresd: Select the CONFIG_EFI_PARTITION option
  imx: spl: Partially revert "spl: eMMC/SD: Provide one __weak
spl_boot_mode() function"

Jagan Teki (4):
  imx6ul: engicam: Drop isiot-mmc defconfig
  imx6: engicam: Drop SPL_EXT_SUPPORT
  imx6q: engicam: Use SPL_LOAD_FIT for MMC boards
  ARM: dts: i.MX6QDL: icore-rqs: Fix eMMC detection during SPL

Maxim Yu. Osipov (1):
  Revert "mx6: ddr: Allow changing REFSEL and REFR fields"

Stefano Babic (1):
  mx6: fix MAINTAINERS for Engicam i.CoreM6 1.5 MIPI

Utkarsh Gupta (3):
  imx: hab: Ensure the IVT DCD pointer is Null prior to calling HAB
authenticate function.
  imx: hab: Check if CSF is valid before authenticating image
  imx: hab: Check if CSF contains deprecated commands

 arch/arm/dts/Makefile  |   1 -
 arch/arm/dts/imx6qdl-icore-rqs.dtsi|   2 ++
 arch/arm/dts/imx6ul-isiot-mmc.dts  |
50 
 arch/arm/include/asm/mach-imx/hab.h|
27 +---
 arch/arm/mach-imx/hab.c|
220
+-
 arch/arm/mach-imx/mx6/Kconfig  |   1 -
 arch/arm/mach-imx/spl.c|
23 +
 board/compulab/cm_fx6/spl.c|   2 --
 board/engicam/imx6q/MAINTAINERS|
8 +++-
 board/engicam/imx6ul/MAINTAINERS   |   1 -
 configs/imx6dl_icore_nand_defconfig|
47 ++
 configs/{imx6ul_isiot_mmc_defconfig => imx6q_icore_nand_defconfig} |
23 -
 configs/imx6qdl_icore_mipi_defconfig   |   2 +-
 configs/imx6qdl_icore_mmc_defconfig|   2 +-
 configs/imx6qdl_icore_rqs_defconfig|   2 +-
 configs/imx6ul_geam_mmc_defconfig  |   1 -
 configs/imx6ul_isiot_emmc_defconfig|
3 ++-
 configs/mx6sabresd_defconfig   |   1 +
 18 files changed, 237 insertions(+), 179 deletions(-)
 delete mode 100644 arch/arm/dts/imx6ul-isiot-mmc.dts
 create mode 100644 configs/imx6dl_icore_nand_defconfig
 rename configs/{imx6ul_isiot_mmc_defconfig =>
imx6q_icore_nand_defconfig} (64%)



-- 
=
DENX Software Engineering GmbH,  Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Re: [U-Boot] [PULL-Update] : Please pull u-boot-imx

[Albert ARIBAUD]

Hi Stefano,

On Fri, 03 Jan 2014 15:51:14 +0100, Stefano Babic sba...@denx.de
wrote:

 On 02/01/2014 17:25, Stefano Babic wrote:
  Hi Albert,
  
  my first pull-request in 2014 ! Please pull from u-boot-imx, thanks !
  
 
 Albert, I forget to merge some further patches. This is my updated PULL
 request:
 
 The following changes since commit 56eb3da43fab5990a4b7bc118b76c7cae2ceb140:
 
   arm, am335x: update for the siemens boards (2013-11-12 09:53:59 -0500)
 
 are available in the git repository at:
 
   git://www.denx.de/git/u-boot-imx.git master
 
 for you to fetch changes up to 4611d5bab26f93471b84f6f33967cef69b3f723a:
 
   arm: mx5: Add fuse supply enable in fsl_iim (2014-01-03 15:44:06 +0100)
 
 
 Eric Nelson (8):
   i.MX6DQ/DLS: replace pad names with their Linux kernel equivalents
   i.MX6DQ/DLS: remove useless mux/pad declarations
   i.MX6DQ: Add Pinmux settings that are present in mainline and
 Dual-Lite/Solo
   i.MX6DQ/DLS: remove unused pad declarations
   i.MX6DQ/DLS: whitespace: Align IOMUX_PAD column in declarations
   imx-common: remove extraneous semicolon from macro
   i.MX6 (DQ/DLS): use macros for mux and pad declarations
   ARM: mx6: Update non-Freescale boards to include CPU errata.
 
 Fabio Estevam (24):
   configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards
   wandboard: Return the error immediately when ipuv3_fb_init() fails
   wandboard: Return the error when cpu_eth_init() fails
   titanium: Return the error when cpu_eth_init() fails
   nitrogen6x: Remove unused OCOTP options
   mx51evk: Fix pmic_init() argument
   mx31pdk: Fix pmic_init() argument
   efikamx: Fix pmic_init() argument
   power: power_fsl: Pass p-bus in the same way for SPI and I2C cases
   mx6sabresd: Fix wrong colors in LVDS splash
   mx6sabresd: Add SPI NOR support
   imx: Explicitly pass the I2C bus number in pmic_init()
   configs: imx: Remove CONFIG_SYS_SPD_BUS_NUM option
   mx6: clock: Fix the calculation of PLL_ENET frequency
   mx6sabresd: Allow probing HSYNC, VSYNC and DISP_CLK signals
   mx6sabresd: Fix LVDS width and color format
   doc: README.fuse: Add an example on how to use the fuse API on mx6q
   mx6sabre_common.h: Add CONFIG_CMD_FUSE support
   mx6: soc: Staticize set_vddsoc()
   mx6: soc: Clear the LDO ramp values up prior to setting the LDO
 voltages
   mx6: soc: Set the VDDSOC at 1.175 V
   mx6: soc: Introduce set_ldo_voltage()
   mx6: soc: Add the required LDO ramp up delay
   mx6: soc: Disable VDDPU regulator
 
 Frank Li (1):
   imx6: fix random hang when download by usb
 
 Giuseppe Pagano (5):
   udoo: Move and optimize platform register setting.
   udoo: Add ethernet support (FEC + Micrel KSZ9031).
   udoo: Fix watchdog during kernel boot.
   nitrogen6x: Move setup_sata to common part
   udoo: Add SATA support on uDoo Board.
 
 Liu Ying (1):
   MX6 SabreSD: Use readl() to read the CCM_CCGR3 register
 
 Marek Vasut (3):
   Net: FEC: Fix huge memory leak
   ARM: mx53: video: Add IPUv3 LCD support for M53EVK
   ARM: mxs: tools: Fix errno handling in strtoul() invocation
 
 Michael Heimpold (1):
   mxs_gpio: fix the handling in gpio_direction_output()
 
 Otavio Salvador (6):
   imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro
   mx28evk: Use 512k for fdt partition to align it
   mx28evk: Add 'nandboot' environment command
   mx28evk: Extend environment to easy write of NAND system
   ARM: mx6: Change the FDT loading address to avoid overlaping
   ARM: mx6: Allow enablement of FEC Anatop based clock for all MX6
 
 Sergey Alyoshin (1):
   arm: mx5: Add fuse supply enable in fsl_iim
 
 Stefan Roese (1):
   mx6: titanium: Move BSP code to barco board directory
 
 Stefano Babic (1):
   MX6: fix sata compilation for i.MX6
 
  arch/arm/cpu/armv7/mx5/clock.c   |   12 +
  arch/arm/cpu/armv7/mx6/clock.c   |   23 +-
  arch/arm/cpu/armv7/mx6/soc.c |  110 +-
  arch/arm/imx-common/Makefile |3 +
  arch/arm/imx-common/cpu.c|4 +-
  arch/arm/imx-common/sata.c   |   34 +
  arch/arm/include/asm/arch-mx5/clock.h|1 +
  arch/arm/include/asm/arch-mx5/crm_regs.h |3 +
  arch/arm/include/asm/arch-mx6/crm_regs.h |1 +
  arch/arm/include/asm/arch-mx6/imx-regs.h |   23 +
  arch/arm/include/asm/arch-mx6/mx6-pins.h |   33 +-
  arch/arm/include/asm/arch-mx6/mx6dl_pins.h   | 2728
 +-
  arch/arm/include/asm/arch-mx6/mx6q_pins.h| 2642
 -
  arch/arm/include/asm/arch-mx6/sys_proto.h|2 -
  arch/arm/include/asm/imx-common/iomux-v3.h   |2 +
  arch/arm/include/asm/imx-common/sata.h   

Re: [U-Boot] [PULL-Update] : Please pull u-boot-imx

[Stefano Babic]

On 02/01/2014 17:25, Stefano Babic wrote:
 Hi Albert,
 
 my first pull-request in 2014 ! Please pull from u-boot-imx, thanks !
 

Albert, I forget to merge some further patches. This is my updated PULL
request:

The following changes since commit 56eb3da43fab5990a4b7bc118b76c7cae2ceb140:

  arm, am335x: update for the siemens boards (2013-11-12 09:53:59 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 4611d5bab26f93471b84f6f33967cef69b3f723a:

  arm: mx5: Add fuse supply enable in fsl_iim (2014-01-03 15:44:06 +0100)


Eric Nelson (8):
  i.MX6DQ/DLS: replace pad names with their Linux kernel equivalents
  i.MX6DQ/DLS: remove useless mux/pad declarations
  i.MX6DQ: Add Pinmux settings that are present in mainline and
Dual-Lite/Solo
  i.MX6DQ/DLS: remove unused pad declarations
  i.MX6DQ/DLS: whitespace: Align IOMUX_PAD column in declarations
  imx-common: remove extraneous semicolon from macro
  i.MX6 (DQ/DLS): use macros for mux and pad declarations
  ARM: mx6: Update non-Freescale boards to include CPU errata.

Fabio Estevam (24):
  configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards
  wandboard: Return the error immediately when ipuv3_fb_init() fails
  wandboard: Return the error when cpu_eth_init() fails
  titanium: Return the error when cpu_eth_init() fails
  nitrogen6x: Remove unused OCOTP options
  mx51evk: Fix pmic_init() argument
  mx31pdk: Fix pmic_init() argument
  efikamx: Fix pmic_init() argument
  power: power_fsl: Pass p-bus in the same way for SPI and I2C cases
  mx6sabresd: Fix wrong colors in LVDS splash
  mx6sabresd: Add SPI NOR support
  imx: Explicitly pass the I2C bus number in pmic_init()
  configs: imx: Remove CONFIG_SYS_SPD_BUS_NUM option
  mx6: clock: Fix the calculation of PLL_ENET frequency
  mx6sabresd: Allow probing HSYNC, VSYNC and DISP_CLK signals
  mx6sabresd: Fix LVDS width and color format
  doc: README.fuse: Add an example on how to use the fuse API on mx6q
  mx6sabre_common.h: Add CONFIG_CMD_FUSE support
  mx6: soc: Staticize set_vddsoc()
  mx6: soc: Clear the LDO ramp values up prior to setting the LDO
voltages
  mx6: soc: Set the VDDSOC at 1.175 V
  mx6: soc: Introduce set_ldo_voltage()
  mx6: soc: Add the required LDO ramp up delay
  mx6: soc: Disable VDDPU regulator

Frank Li (1):
  imx6: fix random hang when download by usb

Giuseppe Pagano (5):
  udoo: Move and optimize platform register setting.
  udoo: Add ethernet support (FEC + Micrel KSZ9031).
  udoo: Fix watchdog during kernel boot.
  nitrogen6x: Move setup_sata to common part
  udoo: Add SATA support on uDoo Board.

Liu Ying (1):
  MX6 SabreSD: Use readl() to read the CCM_CCGR3 register

Marek Vasut (3):
  Net: FEC: Fix huge memory leak
  ARM: mx53: video: Add IPUv3 LCD support for M53EVK
  ARM: mxs: tools: Fix errno handling in strtoul() invocation

Michael Heimpold (1):
  mxs_gpio: fix the handling in gpio_direction_output()

Otavio Salvador (6):
  imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro
  mx28evk: Use 512k for fdt partition to align it
  mx28evk: Add 'nandboot' environment command
  mx28evk: Extend environment to easy write of NAND system
  ARM: mx6: Change the FDT loading address to avoid overlaping
  ARM: mx6: Allow enablement of FEC Anatop based clock for all MX6

Sergey Alyoshin (1):
  arm: mx5: Add fuse supply enable in fsl_iim

Stefan Roese (1):
  mx6: titanium: Move BSP code to barco board directory

Stefano Babic (1):
  MX6: fix sata compilation for i.MX6

 arch/arm/cpu/armv7/mx5/clock.c   |   12 +
 arch/arm/cpu/armv7/mx6/clock.c   |   23 +-
 arch/arm/cpu/armv7/mx6/soc.c |  110 +-
 arch/arm/imx-common/Makefile |3 +
 arch/arm/imx-common/cpu.c|4 +-
 arch/arm/imx-common/sata.c   |   34 +
 arch/arm/include/asm/arch-mx5/clock.h|1 +
 arch/arm/include/asm/arch-mx5/crm_regs.h |3 +
 arch/arm/include/asm/arch-mx6/crm_regs.h |1 +
 arch/arm/include/asm/arch-mx6/imx-regs.h |   23 +
 arch/arm/include/asm/arch-mx6/mx6-pins.h |   33 +-
 arch/arm/include/asm/arch-mx6/mx6dl_pins.h   | 2728
+-
 arch/arm/include/asm/arch-mx6/mx6q_pins.h| 2642
-
 arch/arm/include/asm/arch-mx6/sys_proto.h|2 -
 arch/arm/include/asm/imx-common/iomux-v3.h   |2 +
 arch/arm/include/asm/imx-common/sata.h   |   16 +
 board/{freescale = barco}/titanium/Makefile |0
 board/{freescale = barco}/titanium/imximage.cfg |0
 board/{freescale = barco}/titanium/titanium.c   |  110 +-