The imx8mm-beacon boards can migrate to OF_UPSTREAM which also
allows for the removal the device tree files.
Signed-off-by: Adam Ford
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 04ffa1f165..443d651827 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1091,7 +1091,6 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
imx8mn-evk.dtb \
imx8mn-var-som-symphony.dtb \
imx8mq-evk.dtb \
- imx8mm-beacon-kit.dtb \
imx8mn-beacon-kit.dtb \
imx8mq-mnt-reform2.dtb \
imx8mq-phanbell.dtb \
diff --git a/arch/arm/dts/imx8mm-beacon-kit.dts
b/arch/arm/dts/imx8mm-beacon-kit.dts
deleted file mode 100644
index 74a7b0cc10..00
--- a/arch/arm/dts/imx8mm-beacon-kit.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright 2020 Compass Electronics Group, LLC
- */
-
-/dts-v1/;
-
-#include "imx8mm.dtsi"
-#include "imx8mm-beacon-som.dtsi"
-#include "imx8mm-beacon-baseboard.dtsi"
-
-/ {
- model = "Beacon EmbeddedWorks i.MX8M Mini Development Kit";
- compatible = "beacon,imx8mm-beacon-kit", "fsl,imx8mm";
-
- chosen {
- stdout-path =
- };
-};
diff --git a/arch/arm/dts/imx8mm-beacon-som.dtsi
b/arch/arm/dts/imx8mm-beacon-som.dtsi
deleted file mode 100644
index cf07987ccc..00
--- a/arch/arm/dts/imx8mm-beacon-som.dtsi
+++ /dev/null
@@ -1,461 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright 2020 Compass Electronics Group, LLC
- */
-
-/ {
- aliases {
- rtc0 =
- rtc1 = _rtc;
- };
-
- usdhc1_pwrseq: usdhc1_pwrseq {
- compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
- pinctrl-0 = <_usdhc1_gpio>;
- reset-gpios = < 10 GPIO_ACTIVE_LOW>;
- clocks = <_32k>;
- clock-names = "ext_clock";
- post-power-on-delay-ms = <80>;
- };
-
- memory@4000 {
- device_type = "memory";
- reg = <0x0 0x4000 0 0x8000>;
- };
-};
-
-_0 {
- cpu-supply = <_reg>;
-};
-
-_1 {
- cpu-supply = <_reg>;
-};
-
-_2 {
- cpu-supply = <_reg>;
-};
-
-_3 {
- cpu-supply = <_reg>;
-};
-
- {
- operating-points-v2 = <_opp_table>;
-
- ddrc_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-25M {
- opp-hz = /bits/ 64 <2500>;
- };
-
- opp-100M {
- opp-hz = /bits/ 64 <1>;
- };
-
- opp-750M {
- opp-hz = /bits/ 64 <75000>;
- };
- };
-};
-
- {
- pinctrl-names = "default";
- pinctrl-0 = <_fec1>;
- phy-mode = "rgmii-id";
- phy-handle = <>;
- fsl,magic-packet;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
- };
-};
-
- {
- pinctrl-names = "default";
- pinctrl-0 = <_flexspi>;
- status = "okay";
-
- flash@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <8000>;
- spi-tx-bus-width = <1>;
- spi-rx-bus-width = <4>;
- };
-};
-
- {
- clock-frequency = <40>;
- pinctrl-names = "default";
- pinctrl-0 = <_i2c1>;
- status = "okay";
-
- pmic@4b {
- compatible = "rohm,bd71847";
- reg = <0x4b>;
- pinctrl-names = "default";
- pinctrl-0 = <_pmic>;
- interrupt-parent = <>;
- interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
- rohm,reset-snvs-powered;
-
- #clock-cells = <0>;
- clocks = <_32k 0>;
- clock-output-names = "clk-32k-out";
-
- regulators {
- buck1_reg: BUCK1 {
- regulator-name = "buck1";
- regulator-min-microvolt = <70>;
- regulator-max-microvolt = <130>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <1250>;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "buck2";
- regulator-min-microvolt = <70>;
- regulator-max-microvolt = <130>;
- regulator-boot-on;
- regulator-always-on;
-
