Re: [PATCH v2 11/14] rockchip: rk3308-evb: Update defconfig
Hi Jonas, On 2024/4/22 17:16, Jonas Karlman wrote: Hi Kever, On 2024-04-22 10:50, Kever Yang wrote: Hi Jonas, On 2024/4/9 02:14, Jonas Karlman wrote: Update defconfig for rk3308-evb with new defaults. Add OF_LIBFDT_OVERLAY=y to support device tree overlays. Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL. Use DEBUG_UART_BASE=0xFF0E and disable DEBUG_UART_BOARD_INIT to make debug uart use uart4, same as stdout-path prop. Why this change happen? I think rk3308-evb is using UART2 on 0xFF0C. The device tree both used in U-Boot [1] and Linux [2] both use: stdout-path = "serial4:150n8" and only enable the uart4 node. Yet the defconfig in U-Boot use a DEBUG_UART_BASE for uart2 instead of uart4. Thanks for this info, rk3308b evb which is for customer do use the uart4 instead of uart2. Reviewed-by: Kever Yang Thanks, - Kever Having U-Boot defconfig matching the upstream device tree seem like a good thing, but maybe the device tree is wrong? [1] https://source.denx.de/u-boot/u-boot/-/blob/master/arch/arm/dts/rk3308-evb.dts [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/rockchip/rk3308-evb.dts Regards, Jonas Thanks, - Kever Remove BOOTDELAY=0, SYS_CONSOLE_INFO_QUIET=y and enable more CMD to allow use of U-Boot cmdline. Add DM_ETH_PHY=y and PHY_REALTEK=y to support onboard ethernet PHY. Add PHY_ROCKCHIP_INNO_USB2=y, DM_USB_GADGET=y and remove USB_DWC2=y to allow full use of USB 2.0 host and otg ports. Enable EFI_LOADER to allow EFI boot. Signed-off-by: Jonas Karlman --- v2: Fix DEBUG_UART_BASE and disable DEBUG_UART_BOARD_INIT --- configs/evb-rk3308_defconfig | 37 +++- 1 file changed, 15 insertions(+), 22 deletions(-) diff --git a/configs/evb-rk3308_defconfig b/configs/evb-rk3308_defconfig index 9dc7d9c0caea..04a94e13a68a 100644 --- a/configs/evb-rk3308_defconfig +++ b/configs/evb-rk3308_defconfig @@ -3,41 +3,32 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=2400 CONFIG_ARCH_ROCKCHIP=y CONFIG_DEFAULT_DEVICE_TREE="rk3308-evb" +CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_ROCKCHIP_RK3308=y -CONFIG_SPL_DRIVERS_MISC=y CONFIG_TARGET_EVB_RK3308=y -CONFIG_DEBUG_UART_BASE=0xFF0C +CONFIG_DEBUG_UART_BASE=0xFF0E CONFIG_DEBUG_UART_CLOCK=2400 +# CONFIG_DEBUG_UART_BOARD_INIT is not set CONFIG_SYS_LOAD_ADDR=0xc00800 CONFIG_DEBUG_UART=y CONFIG_ANDROID_BOOT_IMAGE=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y -CONFIG_BOOTDELAY=0 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3308-evb.dtb" -CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_MAX_SIZE=0x2 +CONFIG_SPL_MAX_SIZE=0x4 CONFIG_SPL_PAD_TO=0x7f8000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_CONSOLE is not set -# CONFIG_CMD_ELF is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_XIMG is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y -# CONFIG_CMD_LOADB is not set -# CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_USB=y +CONFIG_CMD_ROCKUSB=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_SLEEP is not set -# CONFIG_SPL_DOS_PARTITION is not set -# CONFIG_ISO_PARTITION is not set -CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64 +CONFIG_CMD_RNG=y +CONFIG_CMD_KASLRSEED=y +CONFIG_CMD_REGULATOR=y CONFIG_SPL_OF_CONTROL=y CONFIG_OF_LIVE=y CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" @@ -51,9 +42,11 @@ CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_SUPPORT_EMMC_RPMB=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH_PHY=y CONFIG_ETH_DESIGNWARE=y CONFIG_GMAC_ROCKCHIP=y -CONFIG_PHY=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y CONFIG_PINCTRL=y CONFIG_REGULATOR_PWM=y CONFIG_DM_REGULATOR_FIXED=y @@ -62,15 +55,15 @@ CONFIG_RAM=y CONFIG_BAUDRATE=150 CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550_MEM32=y +CONFIG_SYSINFO=y CONFIG_SYSRESET=y CONFIG_USB=y +CONFIG_DM_USB_GADGET=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y -CONFIG_USB_DWC2=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_SPL_TINY_MEMSET=y +CONFIG_USB_FUNCTION_ROCKUSB=y CONFIG_LZO=y CONFIG_ERRNO_STR=y -# CONFIG_EFI_LOADER is not set
Re: [PATCH v2 11/14] rockchip: rk3308-evb: Update defconfig
Hi Kever, On 2024-04-22 10:50, Kever Yang wrote: > Hi Jonas, > > On 2024/4/9 02:14, Jonas Karlman wrote: >> Update defconfig for rk3308-evb with new defaults. >> >> Add OF_LIBFDT_OVERLAY=y to support device tree overlays. >> >> Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL. >> >> Use DEBUG_UART_BASE=0xFF0E and disable DEBUG_UART_BOARD_INIT to >> make debug uart use uart4, same as stdout-path prop. > > Why this change happen? I think rk3308-evb is using UART2 on 0xFF0C. > The device tree both used in U-Boot [1] and Linux [2] both use: stdout-path = "serial4:150n8" and only enable the uart4 node. Yet the defconfig in U-Boot use a DEBUG_UART_BASE for uart2 instead of uart4. Having U-Boot defconfig matching the upstream device tree seem like a good thing, but maybe the device tree is wrong? [1] https://source.denx.de/u-boot/u-boot/-/blob/master/arch/arm/dts/rk3308-evb.dts [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/rockchip/rk3308-evb.dts Regards, Jonas > > Thanks, > > - Kever > >> >> Remove BOOTDELAY=0, SYS_CONSOLE_INFO_QUIET=y and enable more CMD to >> allow use of U-Boot cmdline. >> >> Add DM_ETH_PHY=y and PHY_REALTEK=y to support onboard ethernet PHY. >> >> Add PHY_ROCKCHIP_INNO_USB2=y, DM_USB_GADGET=y and remove USB_DWC2=y to >> allow full use of USB 2.0 host and otg ports. >> >> Enable EFI_LOADER to allow EFI boot. >> >> Signed-off-by: Jonas Karlman >> --- >> v2: Fix DEBUG_UART_BASE and disable DEBUG_UART_BOARD_INIT >> --- >> configs/evb-rk3308_defconfig | 37 +++- >> 1 file changed, 15 insertions(+), 22 deletions(-) >> >> diff --git a/configs/evb-rk3308_defconfig b/configs/evb-rk3308_defconfig >> index 9dc7d9c0caea..04a94e13a68a 100644 >> --- a/configs/evb-rk3308_defconfig >> +++ b/configs/evb-rk3308_defconfig >> @@ -3,41 +3,32 @@ CONFIG_SKIP_LOWLEVEL_INIT=y >> CONFIG_COUNTER_FREQUENCY=2400 >> CONFIG_ARCH_ROCKCHIP=y >> CONFIG_DEFAULT_DEVICE_TREE="rk3308-evb" >> +CONFIG_OF_LIBFDT_OVERLAY=y >> CONFIG_DM_RESET=y >> CONFIG_ROCKCHIP_RK3308=y >> -CONFIG_SPL_DRIVERS_MISC=y >> CONFIG_TARGET_EVB_RK3308=y >> -CONFIG_DEBUG_UART_BASE=0xFF0C >> +CONFIG_DEBUG_UART_BASE=0xFF0E >> CONFIG_DEBUG_UART_CLOCK=2400 >> +# CONFIG_DEBUG_UART_BOARD_INIT is not set >> CONFIG_SYS_LOAD_ADDR=0xc00800 >> CONFIG_DEBUG_UART=y >> CONFIG_ANDROID_BOOT_IMAGE=y >> CONFIG_FIT=y >> CONFIG_FIT_VERBOSE=y >> -CONFIG_BOOTDELAY=0 >> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3308-evb.dtb" >> -CONFIG_SYS_CONSOLE_INFO_QUIET=y >> # CONFIG_DISPLAY_CPUINFO is not set >> -CONFIG_SPL_MAX_SIZE=0x2 >> +CONFIG_SPL_MAX_SIZE=0x4 >> CONFIG_SPL_PAD_TO=0x7f8000 >> # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set >> -# CONFIG_CMD_BDI is not set >> -# CONFIG_CMD_CONSOLE is not set >> -# CONFIG_CMD_ELF is not set >> -# CONFIG_CMD_IMI is not set >> -# CONFIG_CMD_XIMG is not set >> +CONFIG_CMD_GPIO=y >> CONFIG_CMD_GPT=y >> -# CONFIG_CMD_LOADB is not set >> -# CONFIG_CMD_LOADS is not set >> CONFIG_CMD_MMC=y >> CONFIG_CMD_USB=y >> +CONFIG_CMD_ROCKUSB=y >> CONFIG_CMD_USB_MASS_STORAGE=y >> -# CONFIG_CMD_ITEST is not set >> -# CONFIG_CMD_SETEXPR is not set >> -# CONFIG_CMD_SLEEP is not set >> -# CONFIG_SPL_DOS_PARTITION is not set >> -# CONFIG_ISO_PARTITION is not set >> -CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64 >> +CONFIG_CMD_RNG=y >> +CONFIG_CMD_KASLRSEED=y >> +CONFIG_CMD_REGULATOR=y >> CONFIG_SPL_OF_CONTROL=y >> CONFIG_OF_LIVE=y >> CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks >> assigned-clock-rates assigned-clock-parents" >> @@ -51,9 +42,11 @@ CONFIG_SYS_I2C_ROCKCHIP=y >> CONFIG_SUPPORT_EMMC_RPMB=y >> CONFIG_MMC_DW=y >> CONFIG_MMC_DW_ROCKCHIP=y >> +CONFIG_PHY_REALTEK=y >> +CONFIG_DM_ETH_PHY=y >> CONFIG_ETH_DESIGNWARE=y >> CONFIG_GMAC_ROCKCHIP=y >> -CONFIG_PHY=y >> +CONFIG_PHY_ROCKCHIP_INNO_USB2=y >> CONFIG_PINCTRL=y >> CONFIG_REGULATOR_PWM=y >> CONFIG_DM_REGULATOR_FIXED=y >> @@ -62,15 +55,15 @@ CONFIG_RAM=y >> CONFIG_BAUDRATE=150 >> CONFIG_DEBUG_UART_SHIFT=2 >> CONFIG_SYS_NS16550_MEM32=y >> +CONFIG_SYSINFO=y >> CONFIG_SYSRESET=y >> CONFIG_USB=y >> +CONFIG_DM_USB_GADGET=y >> CONFIG_USB_EHCI_HCD=y >> CONFIG_USB_EHCI_GENERIC=y >> -CONFIG_USB_DWC2=y >> CONFIG_USB_GADGET=y >> CONFIG_USB_GADGET_DWC2_OTG=y >> CONFIG_USB_GADGET_DOWNLOAD=y >> -CONFIG_SPL_TINY_MEMSET=y >> +CONFIG_USB_FUNCTION_ROCKUSB=y >> CONFIG_LZO=y >> CONFIG_ERRNO_STR=y >> -# CONFIG_EFI_LOADER is not set
Re: [PATCH v2 11/14] rockchip: rk3308-evb: Update defconfig
Hi Jonas, On 2024/4/9 02:14, Jonas Karlman wrote: Update defconfig for rk3308-evb with new defaults. Add OF_LIBFDT_OVERLAY=y to support device tree overlays. Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL. Use DEBUG_UART_BASE=0xFF0E and disable DEBUG_UART_BOARD_INIT to make debug uart use uart4, same as stdout-path prop. Why this change happen? I think rk3308-evb is using UART2 on 0xFF0C. Thanks, - Kever Remove BOOTDELAY=0, SYS_CONSOLE_INFO_QUIET=y and enable more CMD to allow use of U-Boot cmdline. Add DM_ETH_PHY=y and PHY_REALTEK=y to support onboard ethernet PHY. Add PHY_ROCKCHIP_INNO_USB2=y, DM_USB_GADGET=y and remove USB_DWC2=y to allow full use of USB 2.0 host and otg ports. Enable EFI_LOADER to allow EFI boot. Signed-off-by: Jonas Karlman --- v2: Fix DEBUG_UART_BASE and disable DEBUG_UART_BOARD_INIT --- configs/evb-rk3308_defconfig | 37 +++- 1 file changed, 15 insertions(+), 22 deletions(-) diff --git a/configs/evb-rk3308_defconfig b/configs/evb-rk3308_defconfig index 9dc7d9c0caea..04a94e13a68a 100644 --- a/configs/evb-rk3308_defconfig +++ b/configs/evb-rk3308_defconfig @@ -3,41 +3,32 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=2400 CONFIG_ARCH_ROCKCHIP=y CONFIG_DEFAULT_DEVICE_TREE="rk3308-evb" +CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_ROCKCHIP_RK3308=y -CONFIG_SPL_DRIVERS_MISC=y CONFIG_TARGET_EVB_RK3308=y -CONFIG_DEBUG_UART_BASE=0xFF0C +CONFIG_DEBUG_UART_BASE=0xFF0E CONFIG_DEBUG_UART_CLOCK=2400 +# CONFIG_DEBUG_UART_BOARD_INIT is not set CONFIG_SYS_LOAD_ADDR=0xc00800 CONFIG_DEBUG_UART=y CONFIG_ANDROID_BOOT_IMAGE=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y -CONFIG_BOOTDELAY=0 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3308-evb.dtb" -CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_MAX_SIZE=0x2 +CONFIG_SPL_MAX_SIZE=0x4 CONFIG_SPL_PAD_TO=0x7f8000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_CONSOLE is not set -# CONFIG_CMD_ELF is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_XIMG is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y -# CONFIG_CMD_LOADB is not set -# CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_USB=y +CONFIG_CMD_ROCKUSB=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_SLEEP is not set -# CONFIG_SPL_DOS_PARTITION is not set -# CONFIG_ISO_PARTITION is not set -CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64 +CONFIG_CMD_RNG=y +CONFIG_CMD_KASLRSEED=y +CONFIG_CMD_REGULATOR=y CONFIG_SPL_OF_CONTROL=y CONFIG_OF_LIVE=y CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" @@ -51,9 +42,11 @@ CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_SUPPORT_EMMC_RPMB=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH_PHY=y CONFIG_ETH_DESIGNWARE=y CONFIG_GMAC_ROCKCHIP=y -CONFIG_PHY=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y CONFIG_PINCTRL=y CONFIG_REGULATOR_PWM=y CONFIG_DM_REGULATOR_FIXED=y @@ -62,15 +55,15 @@ CONFIG_RAM=y CONFIG_BAUDRATE=150 CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550_MEM32=y +CONFIG_SYSINFO=y CONFIG_SYSRESET=y CONFIG_USB=y +CONFIG_DM_USB_GADGET=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y -CONFIG_USB_DWC2=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_SPL_TINY_MEMSET=y +CONFIG_USB_FUNCTION_ROCKUSB=y CONFIG_LZO=y CONFIG_ERRNO_STR=y -# CONFIG_EFI_LOADER is not set
[PATCH v2 11/14] rockchip: rk3308-evb: Update defconfig
Update defconfig for rk3308-evb with new defaults. Add OF_LIBFDT_OVERLAY=y to support device tree overlays. Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL. Use DEBUG_UART_BASE=0xFF0E and disable DEBUG_UART_BOARD_INIT to make debug uart use uart4, same as stdout-path prop. Remove BOOTDELAY=0, SYS_CONSOLE_INFO_QUIET=y and enable more CMD to allow use of U-Boot cmdline. Add DM_ETH_PHY=y and PHY_REALTEK=y to support onboard ethernet PHY. Add PHY_ROCKCHIP_INNO_USB2=y, DM_USB_GADGET=y and remove USB_DWC2=y to allow full use of USB 2.0 host and otg ports. Enable EFI_LOADER to allow EFI boot. Signed-off-by: Jonas Karlman --- v2: Fix DEBUG_UART_BASE and disable DEBUG_UART_BOARD_INIT --- configs/evb-rk3308_defconfig | 37 +++- 1 file changed, 15 insertions(+), 22 deletions(-) diff --git a/configs/evb-rk3308_defconfig b/configs/evb-rk3308_defconfig index 9dc7d9c0caea..04a94e13a68a 100644 --- a/configs/evb-rk3308_defconfig +++ b/configs/evb-rk3308_defconfig @@ -3,41 +3,32 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=2400 CONFIG_ARCH_ROCKCHIP=y CONFIG_DEFAULT_DEVICE_TREE="rk3308-evb" +CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_ROCKCHIP_RK3308=y -CONFIG_SPL_DRIVERS_MISC=y CONFIG_TARGET_EVB_RK3308=y -CONFIG_DEBUG_UART_BASE=0xFF0C +CONFIG_DEBUG_UART_BASE=0xFF0E CONFIG_DEBUG_UART_CLOCK=2400 +# CONFIG_DEBUG_UART_BOARD_INIT is not set CONFIG_SYS_LOAD_ADDR=0xc00800 CONFIG_DEBUG_UART=y CONFIG_ANDROID_BOOT_IMAGE=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y -CONFIG_BOOTDELAY=0 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3308-evb.dtb" -CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_MAX_SIZE=0x2 +CONFIG_SPL_MAX_SIZE=0x4 CONFIG_SPL_PAD_TO=0x7f8000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_CONSOLE is not set -# CONFIG_CMD_ELF is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_XIMG is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y -# CONFIG_CMD_LOADB is not set -# CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_USB=y +CONFIG_CMD_ROCKUSB=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_SLEEP is not set -# CONFIG_SPL_DOS_PARTITION is not set -# CONFIG_ISO_PARTITION is not set -CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64 +CONFIG_CMD_RNG=y +CONFIG_CMD_KASLRSEED=y +CONFIG_CMD_REGULATOR=y CONFIG_SPL_OF_CONTROL=y CONFIG_OF_LIVE=y CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" @@ -51,9 +42,11 @@ CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_SUPPORT_EMMC_RPMB=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH_PHY=y CONFIG_ETH_DESIGNWARE=y CONFIG_GMAC_ROCKCHIP=y -CONFIG_PHY=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y CONFIG_PINCTRL=y CONFIG_REGULATOR_PWM=y CONFIG_DM_REGULATOR_FIXED=y @@ -62,15 +55,15 @@ CONFIG_RAM=y CONFIG_BAUDRATE=150 CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550_MEM32=y +CONFIG_SYSINFO=y CONFIG_SYSRESET=y CONFIG_USB=y +CONFIG_DM_USB_GADGET=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y -CONFIG_USB_DWC2=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_SPL_TINY_MEMSET=y +CONFIG_USB_FUNCTION_ROCKUSB=y CONFIG_LZO=y CONFIG_ERRNO_STR=y -# CONFIG_EFI_LOADER is not set -- 2.43.2
