Re: [U-Boot] [PATCH] dfu: cmd: trigger watchdog before calling usb_gadget_handle_interrupts
Hi Heiko, trigger watchdog before calling usb_gadget_handle_interrupts() This prevents board resets when calling dfu command on boards which have a watchdog. Signed-off-by: Heiko Schocher h...@denx.de --- common/cmd_dfu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/common/cmd_dfu.c b/common/cmd_dfu.c index e975abe..46af4cf 100644 --- a/common/cmd_dfu.c +++ b/common/cmd_dfu.c @@ -9,6 +9,7 @@ */ #include common.h +#include watchdog.h #include dfu.h #include g_dnl.h #include usb.h @@ -64,6 +65,7 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (ctrlc()) goto exit; + WATCHDOG_RESET(); usb_gadget_handle_interrupts(); } exit: Applied to u-boot-dfu tree! Thanks. -- Best regards, Lukasz Majewski Samsung RD Institute Poland (SRPOL) | Linux Platform Group ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH] dfu: cmd: trigger watchdog before calling usb_gadget_handle_interrupts
Hello Lukasz, Am 18.03.2015 08:44, schrieb Lukasz Majewski: Hi Heiko, Hello Lukasz, Am 17.03.2015 16:16, schrieb Lukasz Majewski: Hi Heiko, Hello Lukasz, Am 17.03.2015 13:56, schrieb Lukasz Majewski: Hi Heiko, Hello Lukasz, Am 17.03.2015 10:52, schrieb Lukasz Majewski: Hi Heiko, trigger watchdog before calling usb_gadget_handle_interrupts() This prevents board resets when calling dfu command on boards which have a watchdog. Signed-off-by: Heiko Schocher h...@denx.de --- common/cmd_dfu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/common/cmd_dfu.c b/common/cmd_dfu.c index e975abe..46af4cf 100644 --- a/common/cmd_dfu.c +++ b/common/cmd_dfu.c @@ -9,6 +9,7 @@ */ #include common.h +#include watchdog.h #include dfu.h #include g_dnl.h #include usb.h @@ -64,6 +65,7 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (ctrlc()) goto exit; + WATCHDOG_RESET(); usb_gadget_handle_interrupts(); } exit: It seems strange for me, that we must reset watchdog when looping in the dfu. Hmm.. maybe I overlook something, but If you look into this while(1) loop, there is no trigger of the watchdog ... and if I start the dfu command without a USB cable on the board, what triggers the boards watchdog? So the problem is when cable is not attached to the board and you call dfu command to execute? Yes. For UMS gadget there is defined g_dnl_board_usb_cable_connected() function. However, it is not yet supported in dfu and requires working MUIC block, which might be not available at your board. Maybe, I must check this ... What is the WATCHDOG interval on the affected board? ~5 seconds Ah, this is on an at91 board .. and in the drivers/serial/atmel_usart.c atmel_serial_tstc() is no WATCHDOG_RESET... So ctrlc() does not trigger the watchdog Could you be a bit more specific here. Does your board expect ctrlc() to update watchdog, so it won't reset? I do not know, if ctrlc() must trigger the WDT ... I just looked into the while(1) loop in common/cmd_dfu.c. There is only ctrlc() which could trigger the WDT... and on at91 it does not trigger it ... By trigger you mean reset WDT core and don't reset the board? I mean, the code must trigger the WDT somewhere in this while(1). If not, the WDT resets the board. If dfu transfer is started there is some output on the console, which triggers the WDT too ... do you have a board with a running WDT? On trats/trats2 we disable WDT when we enter the u-boot. Why? So you can test this behaviour. Do not disable the WDT and start the dfu command ... the board should reset when you start the dfu command (without starting dfu-util on the host, and if ctrl() does not call WATCHDOG_RESET for your hw) ... with my patch it should work ... BTW: I could not disable the WDT on this board, once it is enabled. So disabling the WDT is no option ... :-( Ok, I see. Then I will apply the proposed patch. great! I can imagine following situation when WDT is enabled when u-boot starts (its timeout is ~5sec) and then you start dfu transfer with not connected cable. Then 5sec pass since cable is not connected and no transfer is ongoing. This causes board reset by WDT. Am I right? Yes, because the WDT gets not triggered in this while(1). And maybe if you start the dfu command with connected cable, but not starting dfu-util on the host also, but I have not yet running the usb gadget on this at91 board (at91sam9g20 based) ... Thanks for explanation. I just wanted to have bigger picture of the problem. all right. bye, Heiko -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH] dfu: cmd: trigger watchdog before calling usb_gadget_handle_interrupts
Hi Heiko, Hello Lukasz, Am 17.03.2015 16:16, schrieb Lukasz Majewski: Hi Heiko, Hello Lukasz, Am 17.03.2015 13:56, schrieb Lukasz Majewski: Hi Heiko, Hello Lukasz, Am 17.03.2015 10:52, schrieb Lukasz Majewski: Hi Heiko, trigger watchdog before calling usb_gadget_handle_interrupts() This prevents board resets when calling dfu command on boards which have a watchdog. Signed-off-by: Heiko Schocher h...@denx.de --- common/cmd_dfu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/common/cmd_dfu.c b/common/cmd_dfu.c index e975abe..46af4cf 100644 --- a/common/cmd_dfu.c +++ b/common/cmd_dfu.c @@ -9,6 +9,7 @@ */ #include common.h +#include watchdog.h #include dfu.h #include g_dnl.h #include usb.h @@ -64,6 +65,7 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (ctrlc()) goto exit; + WATCHDOG_RESET(); usb_gadget_handle_interrupts(); } exit: It seems strange for me, that we must reset watchdog when looping in the dfu. Hmm.. maybe I overlook something, but If you look into this while(1) loop, there is no trigger of the watchdog ... and if I start the dfu command without a USB cable on the board, what triggers the boards watchdog? So the problem is when cable is not attached to the board and you call dfu command to execute? Yes. For UMS gadget there is defined g_dnl_board_usb_cable_connected() function. However, it is not yet supported in dfu and requires working MUIC block, which might be not available at your board. Maybe, I must check this ... What is the WATCHDOG interval on the affected board? ~5 seconds Ah, this is on an at91 board .. and in the drivers/serial/atmel_usart.c atmel_serial_tstc() is no WATCHDOG_RESET... So ctrlc() does not trigger the watchdog Could you be a bit more specific here. Does your board expect ctrlc() to update watchdog, so it won't reset? I do not know, if ctrlc() must trigger the WDT ... I just looked into the while(1) loop in common/cmd_dfu.c. There is only ctrlc() which could trigger the WDT... and on at91 it does not trigger it ... By trigger you mean reset WDT core and don't reset the board? I mean, the code must trigger the WDT somewhere in this while(1). If not, the WDT resets the board. If dfu transfer is started there is some output on the console, which triggers the WDT too ... do you have a board with a running WDT? On trats/trats2 we disable WDT when we enter the u-boot. Why? So you can test this behaviour. Do not disable the WDT and start the dfu command ... the board should reset when you start the dfu command (without starting dfu-util on the host, and if ctrl() does not call WATCHDOG_RESET for your hw) ... with my patch it should work ... BTW: I could not disable the WDT on this board, once it is enabled. So disabling the WDT is no option ... :-( Ok, I see. Then I will apply the proposed patch. I can imagine following situation when WDT is enabled when u-boot starts (its timeout is ~5sec) and then you start dfu transfer with not connected cable. Then 5sec pass since cable is not connected and no transfer is ongoing. This causes board reset by WDT. Am I right? Yes, because the WDT gets not triggered in this while(1). And maybe if you start the dfu command with connected cable, but not starting dfu-util on the host also, but I have not yet running the usb gadget on this at91 board (at91sam9g20 based) ... Thanks for explanation. I just wanted to have bigger picture of the problem. bye, Heiko -- Best regards, Lukasz Majewski Samsung RD Institute Poland (SRPOL) | Linux Platform Group ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH] dfu: cmd: trigger watchdog before calling usb_gadget_handle_interrupts
Hello Lukasz, Am 17.03.2015 16:16, schrieb Lukasz Majewski: Hi Heiko, Hello Lukasz, Am 17.03.2015 13:56, schrieb Lukasz Majewski: Hi Heiko, Hello Lukasz, Am 17.03.2015 10:52, schrieb Lukasz Majewski: Hi Heiko, trigger watchdog before calling usb_gadget_handle_interrupts() This prevents board resets when calling dfu command on boards which have a watchdog. Signed-off-by: Heiko Schocher h...@denx.de --- common/cmd_dfu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/common/cmd_dfu.c b/common/cmd_dfu.c index e975abe..46af4cf 100644 --- a/common/cmd_dfu.c +++ b/common/cmd_dfu.c @@ -9,6 +9,7 @@ */ #include common.h +#include watchdog.h #include dfu.h #include g_dnl.h #include usb.h @@ -64,6 +65,7 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (ctrlc()) goto exit; + WATCHDOG_RESET(); usb_gadget_handle_interrupts(); } exit: It seems strange for me, that we must reset watchdog when looping in the dfu. Hmm.. maybe I overlook something, but If you look into this while(1) loop, there is no trigger of the watchdog ... and if I start the dfu command without a USB cable on the board, what triggers the boards watchdog? So the problem is when cable is not attached to the board and you call dfu command to execute? Yes. For UMS gadget there is defined g_dnl_board_usb_cable_connected() function. However, it is not yet supported in dfu and requires working MUIC block, which might be not available at your board. Maybe, I must check this ... What is the WATCHDOG interval on the affected board? ~5 seconds Ah, this is on an at91 board .. and in the drivers/serial/atmel_usart.c atmel_serial_tstc() is no WATCHDOG_RESET... So ctrlc() does not trigger the watchdog Could you be a bit more specific here. Does your board expect ctrlc() to update watchdog, so it won't reset? I do not know, if ctrlc() must trigger the WDT ... I just looked into the while(1) loop in common/cmd_dfu.c. There is only ctrlc() which could trigger the WDT... and on at91 it does not trigger it ... By trigger you mean reset WDT core and don't reset the board? I mean, the code must trigger the WDT somewhere in this while(1). If not, the WDT resets the board. If dfu transfer is started there is some output on the console, which triggers the WDT too ... do you have a board with a running WDT? On trats/trats2 we disable WDT when we enter the u-boot. Why? So you can test this behaviour. Do not disable the WDT and start the dfu command ... the board should reset when you start the dfu command (without starting dfu-util on the host, and if ctrl() does not call WATCHDOG_RESET for your hw) ... with my patch it should work ... BTW: I could not disable the WDT on this board, once it is enabled. So disabling the WDT is no option ... :-( I can imagine following situation when WDT is enabled when u-boot starts (its timeout is ~5sec) and then you start dfu transfer with not connected cable. Then 5sec pass since cable is not connected and no transfer is ongoing. This causes board reset by WDT. Am I right? Yes, because the WDT gets not triggered in this while(1). And maybe if you start the dfu command with connected cable, but not starting dfu-util on the host also, but I have not yet running the usb gadget on this at91 board (at91sam9g20 based) ... bye, Heiko -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH] dfu: cmd: trigger watchdog before calling usb_gadget_handle_interrupts
Hi Heiko, Hello Lukasz, Am 17.03.2015 13:56, schrieb Lukasz Majewski: Hi Heiko, Hello Lukasz, Am 17.03.2015 10:52, schrieb Lukasz Majewski: Hi Heiko, trigger watchdog before calling usb_gadget_handle_interrupts() This prevents board resets when calling dfu command on boards which have a watchdog. Signed-off-by: Heiko Schocher h...@denx.de --- common/cmd_dfu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/common/cmd_dfu.c b/common/cmd_dfu.c index e975abe..46af4cf 100644 --- a/common/cmd_dfu.c +++ b/common/cmd_dfu.c @@ -9,6 +9,7 @@ */ #include common.h +#include watchdog.h #include dfu.h #include g_dnl.h #include usb.h @@ -64,6 +65,7 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (ctrlc()) goto exit; +WATCHDOG_RESET(); usb_gadget_handle_interrupts(); } exit: It seems strange for me, that we must reset watchdog when looping in the dfu. Hmm.. maybe I overlook something, but If you look into this while(1) loop, there is no trigger of the watchdog ... and if I start the dfu command without a USB cable on the board, what triggers the boards watchdog? So the problem is when cable is not attached to the board and you call dfu command to execute? Yes. For UMS gadget there is defined g_dnl_board_usb_cable_connected() function. However, it is not yet supported in dfu and requires working MUIC block, which might be not available at your board. What is the WATCHDOG interval on the affected board? ~5 seconds Ah, this is on an at91 board .. and in the drivers/serial/atmel_usart.c atmel_serial_tstc() is no WATCHDOG_RESET... So ctrlc() does not trigger the watchdog Could you be a bit more specific here. Does your board expect ctrlc() to update watchdog, so it won't reset? I do not know, if ctrlc() must trigger the WDT ... I just looked into the while(1) loop in common/cmd_dfu.c. There is only ctrlc() which could trigger the WDT... and on at91 it does not trigger it ... By trigger you mean reset WDT core and don't reset the board? If dfu transfer is started there is some output on the console, which triggers the WDT too ... do you have a board with a running WDT? On trats/trats2 we disable WDT when we enter the u-boot. I can imagine following situation when WDT is enabled when u-boot starts (its timeout is ~5sec) and then you start dfu transfer with not connected cable. Then 5sec pass since cable is not connected and no transfer is ongoing. This causes board reset by WDT. Am I right? bye, Heiko -- Best regards, Lukasz Majewski Samsung RD Institute Poland (SRPOL) | Linux Platform Group ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH] dfu: cmd: trigger watchdog before calling usb_gadget_handle_interrupts
Hello Lukasz, Am 17.03.2015 10:52, schrieb Lukasz Majewski: Hi Heiko, trigger watchdog before calling usb_gadget_handle_interrupts() This prevents board resets when calling dfu command on boards which have a watchdog. Signed-off-by: Heiko Schocher h...@denx.de --- common/cmd_dfu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/common/cmd_dfu.c b/common/cmd_dfu.c index e975abe..46af4cf 100644 --- a/common/cmd_dfu.c +++ b/common/cmd_dfu.c @@ -9,6 +9,7 @@ */ #include common.h +#include watchdog.h #include dfu.h #include g_dnl.h #include usb.h @@ -64,6 +65,7 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (ctrlc()) goto exit; + WATCHDOG_RESET(); usb_gadget_handle_interrupts(); } exit: It seems strange for me, that we must reset watchdog when looping in the dfu. Hmm.. maybe I overlook something, but If you look into this while(1) loop, there is no trigger of the watchdog ... and if I start the dfu command without a USB cable on the board, what triggers the boards watchdog? What is the WATCHDOG interval on the affected board? ~5 seconds Ah, this is on an at91 board .. and in the drivers/serial/atmel_usart.c atmel_serial_tstc() is no WATCHDOG_RESET... So ctrlc() does not trigger the watchdog bye, Heiko -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH] dfu: cmd: trigger watchdog before calling usb_gadget_handle_interrupts
Hi Heiko, trigger watchdog before calling usb_gadget_handle_interrupts() This prevents board resets when calling dfu command on boards which have a watchdog. Signed-off-by: Heiko Schocher h...@denx.de --- common/cmd_dfu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/common/cmd_dfu.c b/common/cmd_dfu.c index e975abe..46af4cf 100644 --- a/common/cmd_dfu.c +++ b/common/cmd_dfu.c @@ -9,6 +9,7 @@ */ #include common.h +#include watchdog.h #include dfu.h #include g_dnl.h #include usb.h @@ -64,6 +65,7 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (ctrlc()) goto exit; + WATCHDOG_RESET(); usb_gadget_handle_interrupts(); } exit: It seems strange for me, that we must reset watchdog when looping in the dfu. What is the WATCHDOG interval on the affected board? -- Best regards, Lukasz Majewski Samsung RD Institute Poland (SRPOL) | Linux Platform Group ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH] dfu: cmd: trigger watchdog before calling usb_gadget_handle_interrupts
On Tue, 17 Mar 2015 12:09:17 -0400 Tom Rini tr...@konsulko.com wrote: On Tue, Mar 17, 2015 at 04:16:14PM +0100, Lukasz Majewski wrote: Hi Heiko, Hello Lukasz, Am 17.03.2015 13:56, schrieb Lukasz Majewski: Hi Heiko, Hello Lukasz, Am 17.03.2015 10:52, schrieb Lukasz Majewski: Hi Heiko, trigger watchdog before calling usb_gadget_handle_interrupts() This prevents board resets when calling dfu command on boards which have a watchdog. Signed-off-by: Heiko Schocher h...@denx.de --- common/cmd_dfu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/common/cmd_dfu.c b/common/cmd_dfu.c index e975abe..46af4cf 100644 --- a/common/cmd_dfu.c +++ b/common/cmd_dfu.c @@ -9,6 +9,7 @@ */ #include common.h +#include watchdog.h #include dfu.h #include g_dnl.h #include usb.h @@ -64,6 +65,7 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (ctrlc()) goto exit; +WATCHDOG_RESET(); usb_gadget_handle_interrupts(); } exit: It seems strange for me, that we must reset watchdog when looping in the dfu. Hmm.. maybe I overlook something, but If you look into this while(1) loop, there is no trigger of the watchdog ... and if I start the dfu command without a USB cable on the board, what triggers the boards watchdog? So the problem is when cable is not attached to the board and you call dfu command to execute? Yes. For UMS gadget there is defined g_dnl_board_usb_cable_connected() function. However, it is not yet supported in dfu and requires working MUIC block, which might be not available at your board. What is the WATCHDOG interval on the affected board? ~5 seconds Ah, this is on an at91 board .. and in the drivers/serial/atmel_usart.c atmel_serial_tstc() is no WATCHDOG_RESET... So ctrlc() does not trigger the watchdog Could you be a bit more specific here. Does your board expect ctrlc() to update watchdog, so it won't reset? I do not know, if ctrlc() must trigger the WDT ... I just looked into the while(1) loop in common/cmd_dfu.c. There is only ctrlc() which could trigger the WDT... and on at91 it does not trigger it ... By trigger you mean reset WDT core and don't reset the board? If dfu transfer is started there is some output on the console, which triggers the WDT too ... do you have a board with a running WDT? On trats/trats2 we disable WDT when we enter the u-boot. This seems wrong. We should enable the WDT and then be petting or whatever the right term is for saying Hey WDT, I'm alive! which is what WATCHDOG_RESET() is really about. Tom, I agree with the above. However in trats/trats2 case it is not necessary. Best regards, Lukasz pgpAmGDAP1aUz.pgp Description: OpenPGP digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH] dfu: cmd: trigger watchdog before calling usb_gadget_handle_interrupts
Hi Heiko, Hello Lukasz, Am 17.03.2015 10:52, schrieb Lukasz Majewski: Hi Heiko, trigger watchdog before calling usb_gadget_handle_interrupts() This prevents board resets when calling dfu command on boards which have a watchdog. Signed-off-by: Heiko Schocher h...@denx.de --- common/cmd_dfu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/common/cmd_dfu.c b/common/cmd_dfu.c index e975abe..46af4cf 100644 --- a/common/cmd_dfu.c +++ b/common/cmd_dfu.c @@ -9,6 +9,7 @@ */ #include common.h +#include watchdog.h #include dfu.h #include g_dnl.h #include usb.h @@ -64,6 +65,7 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (ctrlc()) goto exit; + WATCHDOG_RESET(); usb_gadget_handle_interrupts(); } exit: It seems strange for me, that we must reset watchdog when looping in the dfu. Hmm.. maybe I overlook something, but If you look into this while(1) loop, there is no trigger of the watchdog ... and if I start the dfu command without a USB cable on the board, what triggers the boards watchdog? So the problem is when cable is not attached to the board and you call dfu command to execute? What is the WATCHDOG interval on the affected board? ~5 seconds Ah, this is on an at91 board .. and in the drivers/serial/atmel_usart.c atmel_serial_tstc() is no WATCHDOG_RESET... So ctrlc() does not trigger the watchdog Could you be a bit more specific here. Does your board expect ctrlc() to update watchdog, so it won't reset? bye, Heiko -- Best regards, Lukasz Majewski Samsung RD Institute Poland (SRPOL) | Linux Platform Group ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH] dfu: cmd: trigger watchdog before calling usb_gadget_handle_interrupts
Hello Lukasz, Am 17.03.2015 13:56, schrieb Lukasz Majewski: Hi Heiko, Hello Lukasz, Am 17.03.2015 10:52, schrieb Lukasz Majewski: Hi Heiko, trigger watchdog before calling usb_gadget_handle_interrupts() This prevents board resets when calling dfu command on boards which have a watchdog. Signed-off-by: Heiko Schocher h...@denx.de --- common/cmd_dfu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/common/cmd_dfu.c b/common/cmd_dfu.c index e975abe..46af4cf 100644 --- a/common/cmd_dfu.c +++ b/common/cmd_dfu.c @@ -9,6 +9,7 @@ */ #include common.h +#include watchdog.h #include dfu.h #include g_dnl.h #include usb.h @@ -64,6 +65,7 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (ctrlc()) goto exit; + WATCHDOG_RESET(); usb_gadget_handle_interrupts(); } exit: It seems strange for me, that we must reset watchdog when looping in the dfu. Hmm.. maybe I overlook something, but If you look into this while(1) loop, there is no trigger of the watchdog ... and if I start the dfu command without a USB cable on the board, what triggers the boards watchdog? So the problem is when cable is not attached to the board and you call dfu command to execute? Yes. What is the WATCHDOG interval on the affected board? ~5 seconds Ah, this is on an at91 board .. and in the drivers/serial/atmel_usart.c atmel_serial_tstc() is no WATCHDOG_RESET... So ctrlc() does not trigger the watchdog Could you be a bit more specific here. Does your board expect ctrlc() to update watchdog, so it won't reset? I do not know, if ctrlc() must trigger the WDT ... I just looked into the while(1) loop in common/cmd_dfu.c. There is only ctrlc() which could trigger the WDT... and on at91 it does not trigger it ... If dfu transfer is started there is some output on the console, which triggers the WDT too ... do you have a board with a running WDT? bye, Heiko -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH] dfu: cmd: trigger watchdog before calling usb_gadget_handle_interrupts
On Tue, Mar 17, 2015 at 04:16:14PM +0100, Lukasz Majewski wrote: Hi Heiko, Hello Lukasz, Am 17.03.2015 13:56, schrieb Lukasz Majewski: Hi Heiko, Hello Lukasz, Am 17.03.2015 10:52, schrieb Lukasz Majewski: Hi Heiko, trigger watchdog before calling usb_gadget_handle_interrupts() This prevents board resets when calling dfu command on boards which have a watchdog. Signed-off-by: Heiko Schocher h...@denx.de --- common/cmd_dfu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/common/cmd_dfu.c b/common/cmd_dfu.c index e975abe..46af4cf 100644 --- a/common/cmd_dfu.c +++ b/common/cmd_dfu.c @@ -9,6 +9,7 @@ */ #include common.h +#include watchdog.h #include dfu.h #include g_dnl.h #include usb.h @@ -64,6 +65,7 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (ctrlc()) goto exit; + WATCHDOG_RESET(); usb_gadget_handle_interrupts(); } exit: It seems strange for me, that we must reset watchdog when looping in the dfu. Hmm.. maybe I overlook something, but If you look into this while(1) loop, there is no trigger of the watchdog ... and if I start the dfu command without a USB cable on the board, what triggers the boards watchdog? So the problem is when cable is not attached to the board and you call dfu command to execute? Yes. For UMS gadget there is defined g_dnl_board_usb_cable_connected() function. However, it is not yet supported in dfu and requires working MUIC block, which might be not available at your board. What is the WATCHDOG interval on the affected board? ~5 seconds Ah, this is on an at91 board .. and in the drivers/serial/atmel_usart.c atmel_serial_tstc() is no WATCHDOG_RESET... So ctrlc() does not trigger the watchdog Could you be a bit more specific here. Does your board expect ctrlc() to update watchdog, so it won't reset? I do not know, if ctrlc() must trigger the WDT ... I just looked into the while(1) loop in common/cmd_dfu.c. There is only ctrlc() which could trigger the WDT... and on at91 it does not trigger it ... By trigger you mean reset WDT core and don't reset the board? If dfu transfer is started there is some output on the console, which triggers the WDT too ... do you have a board with a running WDT? On trats/trats2 we disable WDT when we enter the u-boot. This seems wrong. We should enable the WDT and then be petting or whatever the right term is for saying Hey WDT, I'm alive! which is what WATCHDOG_RESET() is really about. -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] [PATCH] dfu: cmd: trigger watchdog before calling usb_gadget_handle_interrupts
trigger watchdog before calling usb_gadget_handle_interrupts() This prevents board resets when calling dfu command on boards which have a watchdog. Signed-off-by: Heiko Schocher h...@denx.de --- common/cmd_dfu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/common/cmd_dfu.c b/common/cmd_dfu.c index e975abe..46af4cf 100644 --- a/common/cmd_dfu.c +++ b/common/cmd_dfu.c @@ -9,6 +9,7 @@ */ #include common.h +#include watchdog.h #include dfu.h #include g_dnl.h #include usb.h @@ -64,6 +65,7 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (ctrlc()) goto exit; + WATCHDOG_RESET(); usb_gadget_handle_interrupts(); } exit: -- 2.1.0 ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
